不同快淬速度对Nd8Fe85Mo1B6磁性的影响

通过直接快淬制备了不同淬速的Nd₈Fe₈₅Mo₁B₆样品.由振动样品磁强计测量的结果发现,快淬速度对样品的磁性有很大的影响.对样品进行X射线衍射和热磁分析发现,随着淬速的增加样品中的TbCu₇相增多,同时软磁相的晶粒尺寸降低,认为样品的相组成和晶粒尺寸的变化是其磁性存在差异的原因. 关键词：     

K2NiF4型Sr2CrO4的磁电性质研究

以SrO和CrO₂为原料, 在高温高压的条件下直接反应生成纯相的K₂NiF₄结构的Sr₂CrO₄多晶样品. 结构用粉末X射线衍射及GSAS精修表征. 磁化率测试显示样品存在一个弱的反铁磁相变, 奈尔温度为T_N=95 K. 在奈尔温度以上, 磁化率随温度的变化遵循居里-外斯定律. 对样品进行了电阻测试, 结果显示了样品的绝缘特性.     

非晶态Gd45Ni30Al15Co10合金的制备与磁热性能

具有优良磁热性能的材料是磁制冷技术应用的关键.本文设计制备出了一种非晶态四元Gd₄₅Ni₃₀Al₁₅Co₁₀合金条带,系统地研究了该合金的磁热性能. Co的引入增加了合金的非晶态热稳定性,扩大了过冷液相区宽度. Gd₄₅Ni₃₀Al₁₅Co₁₀非晶态合金条带的居里温度和有效磁矩分别为80 K和7.21μB,在10 K温度下饱和磁化强度达到173 A·m~2·kg^-1,矫顽力为0.8 kA·m^-1,具有优异的软磁性能.在5 T的外加磁场下, Gd₄₅Ni₃₀Al₁₅Co₁₀非晶态合金的磁熵变峰值和相对制冷能力分别高达10.2 J·kg^-1·K^-1和918 J·kg^-1.该合金具有典型的二级磁相变特征,可以在较宽的温度范围...     

PrBa2Cu3O7-δ的制备和电子结构

采用固相反应法制备了正交单相PrBa₂Cu₃O_7-δ样品.运用标准直流四引线法测量了该样品的电阻,发现它随温度的变化呈半导体行为.通过XPS测量表明,样品中明显合有Pr⁴⁺.最后从能带结构讨论了PtBa₂Cu₃0_7-δ不超导的原因. 关键词：     

Tm3+ 掺杂ZrF4 -BaF2 -LaF3 -AlF3 -NaF-PbF2玻璃激光制冷中荧光再吸收效应的理论分析

固体材料的激光制冷是近年来发展起来的一个新的研究领域. 掺Tm³⁺的ZrF₄-BaF₂-LaF₃-AlF₃-NaF-PbF₂(ZBLANP)玻璃材料是激光冷却的典型材料之一. 与另一种制冷掺杂离子Yb³⁺相比,Tm³⁺具有更好的制冷潜力. 目前制约材料制冷的一个主要机理就是荧光再吸收. 首先根据Tm³⁺:ZBLANP的光谱参数,利用半经典的随机行走模型得到了不同情况下的平均荧光再吸收次数,随后分析了荧光光子界面出射的全反射效应,并对所得结果进行了修正. 计算结果表明,荧光再吸收会导致量子效率降低0.5%-1%,出射荧光波长红移达到2-10 nm,激光制冷的效率和功率降低. 为了有利于荧光出射和净制冷的实现, 宜采用小体积细长棒的制冷元. 关键词： 激光制冷 稀土离子 荧光再吸收     

哈斯勒合金Ni50Mn35In15的马氏体相变及其磁热效应

利用电弧炉熔炼了Ni₅₀Mn₃₅In₁₅多晶样品,根据磁性测量对其马氏体相变和磁热效应进行了系统研究.结果表明,随着温度的降低,样品在室温附近先后发生了二级磁相变与一级结构相变特征的马氏体相变,导致它的磁化强度产生突变. 同时通过低温下的磁滞回线的测量发现样品存在交换偏置行为,表明低温下马氏体相中铁磁和反铁磁共存. 此外,根据Maxwell方程,计算了样品在马氏体相变温度附近的磁熵变,当温度为309K,磁场改变5 T时,样品的磁熵变可达22.3J/kgK. 关键词： 哈斯勒合金 50Mn₃₅In₁₅')" href="#">Ni₅₀Mn₃₅In₁₅ 马氏体相变 磁热效应     

Y3Al5O12∶Ce3+的余辉和热释光特性

高温固相法合成了Ce³⁺掺杂的Y₃Al₅O₁₂ (YAG)样品,研究了样品的结构、光致发光和热释发光性质. X射线衍射分析结果表明合成样品为YAG纯相,稀土离子的少量掺杂不改变基质YAG的结构. 荧光光谱测试表明在高温空气气氛下Y_2.95Al₅O₁₂ ∶Ce⁴⁺_0.05制备过程中存在Ce⁴⁺关键词： 长余辉 高温热释光 缺陷     

Eu2+掺杂CaSi2O2N2荧光粉发光性能

采用固相反应法合成了组成为Ca_1-xEu_xSi₂O₂N₂的Eu²⁺掺杂CaSi₂O₂N₂荧光粉.通过荧光光谱对样品的发光性能进行了研究,发现Eu²⁺掺杂CaSi₂O₂N₂荧光粉发射光谱为宽波段的单峰结构,主要包含绿光和黄光区,发射峰在556~568 nm.从发射光谱的宽带特征来看,CaSi₂O₂N₂:Eu²⁺的发射主要对应着Eu²⁺离子4f⁶5d→4f⁷跃迁.从激发光谱所覆盖的范围还可以看到,样品可以有效的被UV蓝-光激发,这意味着该类荧光粉在白光LED方面有可能得到广泛的应用.另外,样品的发光性能与激发离子的浓度有着很大关系.激发离子浓度增大时,发射光谱会发生明显红移.利用这一性质,可以通过改变Eu²⁺浓度来调节荧光粉的发光范围,从而满足不同场合的需要.同时,Eu²⁺浓度提高,样品发射光谱的强度也会随之增强,在x=0.06时发射强度达到最大值,之后继续增加Eu²⁺浓度,强度不仅没有增加反而降低,即出现浓度猝灭现象.     

氧离子导体La1.9Y0.1Mo2O9细晶粒陶瓷的制备和电学性质研究

采用溶胶凝胶法合成的La_1.9Y_0.1Mo₂O₉纳米晶粉体, 结合微波烧结技术制备出不同晶粒度的La_1.9Y_0.1Mo₂O₉块体样品. 利用X射线衍射仪(XRD)、高分辨透射显微镜(HRTEM)、场扫描显微镜(SEM)对粉体及陶瓷块体的物相、 形貌进行了表征, 利用交流阻抗谱仪测试了样品不同温度下的电导率. 实验结果表明, 掺Y的La_1.9Y_0.1Mo₂O₉能将高温立方β 相稳定到室温; 块体样品致密均匀, 平均晶粒度范围在60 nm–4 μm之间; 致密度高的样品表现出高的电导率, 其中900 ℃烧结样品的电导率600 ℃时高达0.026 S/cm, 比固相反应法制备的La_1.9Y_0.1Mo₂O₉样品高出约1倍. 总结认为样品的致密性对电导率影响较大, 是通过影响晶界电导率来影响总电导率的, 样品的晶粒度(在60 nm–4 μm范围内)对电导率的影响还不能确定. 关键词： 氧离子导体 1.9Y_0.1Mo₂O₉')" href="#">La_1.9Y_0.1Mo₂O₉ 细晶粒陶瓷 微波烧结     

Si-Al2O3复合薄膜的室温铁磁性

在Si-Al₂O₃复合薄膜中观察到室温铁磁性.Si的体积百分比为15 %的Si-Al₂O₃复合薄膜的磁性最强.Si的含量影响样品的磁有序,在样品中观察到了明显的磁畴.在不同气氛下,对样品进行快速热退火.退火样品的磁性测试结果的差别表明氧空位不是样品铁磁性的主要来源.我们认为铁磁性来源于Si与Al₂O₃基质界面之间的缺陷的磁耦合.改变Si的含量可以改变缺陷密度,从而控制铁磁耦合强度. 关键词： 2O₃薄膜')" href="#">Al₂O₃薄膜 室温铁磁性 掺杂 交换相互作用     

Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation

The red-emitting Ca_0.54Sr_0.16Eu_0.08Gd_0.12(MoO₄)_0.2(WO₄)_0.8 phosphor is improved in the emission charateristics by charge compensation, of which chromaticity coordinates (CIE) are x=0.66 and y=0.33. Three approaches to charge compensation are investigated, namely (a) 3Ca²⁺/Sr²⁺→2Eu³⁺/Gd³⁺+vacancy, (b) 2Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+M⁺(M⁺ is a monovalent cation like Li⁺, Na⁺ and K⁺ employed as a charge compensator) and (c) Ca²⁺/Sr²⁺→Eu³⁺/Gd³⁺+N⁻ (N⁻ is a monovalent anion like F⁻, Cl⁻, Br⁻ and I⁻ employed as charge compensation ions). Through photoluminescent spectra analyzing the radiative and non-radiative relaxation mechanisms of luminescent system are obtained. Under 20 mA forward-bias current, one red-emitting LED is made by combining 390-405 nm-emitting LED chip and the phosphor. The red-emitting phosphor has broad prospects in LED application field.     

CRYSTAL STRUCTURE AND MAGNETIC PROPERTIES OF La1.2Sr1.8-xCaxMn2O7

The effect of divalent cation substitution on the structure and magnetic properties of La_1.2Sr_1.8-xCa_xMn₂O₇ (x = 0－0.900) is investigated in this paper. Partly replacing divalent cation Sr²⁺ by Ca²⁺ ions results in the weakening and then disappearance of long-range ferromagnetic ordering, and the formation of spin canting and low-temperature spin-glass. Based on structural analysis by Rietveld profile fitting, we suggest that this variation of magnetic property be related to a Jahn－Teller-type attice distortion of MnO₆ octahedra due to the introduction of the smaller sized Ca²⁺ ions.     

Ce4+离子在Ca2SnO4一维结构基质中的电荷迁移光谱研究

利用高温固相反应法制备了Ca₂Sn_1-xCe_xO₄和Ca_2-ySr_ySn_1-xCe_xO₄一维结构发光体. XPS结果显示 Ca₂SnO₄拥有两种结合能分别为5277 eV和5293 关键词： 2Sn_1-xCe_xO₄')" href="#">Ca₂Sn_1-xCe_xO₄ 2-ySr_ySn_1-xCe_xO₄')" href="#">Ca_2-ySr_ySn_1-xCe_xO₄ 一维结构 电荷迁移光谱     

Growth and comparison of physicochemical properties of pure,Ca and Sr doped NH4Sb3F10 single crystals for electro optic applications

Single crystals of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ are grown by slow evaporation technique. The effect of dopants on the growth and physicochemical properties also have been investigated and reported for the first time. The grown crystals are characterized with the aid of single crystal X-ray diffractometry to confirm the crystal structure. EDAX studies are done to confirm the presence of dopants in the crystal lattice. The vibrational frequencies of various group ligands in the crystals have been derived from the Fourier transform infrared (FT-IR) spectrum. From the optical absorption spectrum the band gap energy was calculated and it was found to be 5.76, 6.29 and 6.35 eV for pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals respectively. Thermal stability of the sample has been analysed using TG-DTA analysis. The activation energy of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals were calculated from the dc conductivity measurements and it is found to be 0.2728, 0.2816 and 0.3622 eV Experimental results shows improved physicochemical properties when the dopant is added to the pure material.     

Sr和Ba替代对Eu掺杂Ca2.955Si2O7的结构和发光特性的影响研究

利用固相反应法制备了Sr和Ba替代的Ca_2.955-xM_xSi₂O₇: 0.045Eu²⁺ (M= Sr, Ba, x= 0.1-0.5)系列荧光粉, 利用较大离子半径的Sr和Ba元素替代Eu掺杂Ca_2.955-xM_xSi₂O₇ 中的Ca元素,研究Sr和Ba替代对样品结构和发光特性的影响. X射线衍射测试结果表明,少量Sr和Ba替代不会改变基质的晶体结构, 样品仍然为单斜晶系.未替代前, Ca_2.955Si₂O₇: 0.045Eu²⁺ 样品的发射峰在574 nm左右,随着Sr含量的增加,样品的发射峰发生蓝移; 而Ba含量在x= 0.1-0.4时不会引起发射峰位置的移动, 但x= 0.5样品的发射峰发生蓝移.同等含量的Sr和Ba部分替代样品中的Ca元素, Ba替代样品的光谱强度较强.     

Combustion synthesis of Sr3MgSi2O8:Eu and Sr2MgSi2O7:Eu phosphors

Sr₃MgSi₂O₈:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺ phosphors find uses in applications such as plasma display panel (PDP), solid-state lighting, longafter glow. Preparation of these phosphors by a modified combustion synthesis is described in this paper. As-prepared samples did not show photoluminescence. After reducing the samples at 900 °C, characteristic Eu²⁺ emission was observed. Preparation of these phosphors by using similar methods helped clarifying various results obtained for Sr₃MgSi₂O₈:Eu²⁺ by different investigators.     

Electron-correlation-induced band renormalization and Mott transition in Ca1-xSrxVO3

We present the local density approximate+Gutzwiller results for the electronic structure of Ca_1-xSr_xVO₃. The substitution of Sr²⁺ by Ca²⁺ reduces the bandwidth, as the V—O—V bond angle decreases from 180° for SrVO₃ to about 160° for CaVO₃. However, we find that the bandwidth decrease induced by the V—O—V bond angle decrease is smaller as compared to that induced by electron correlation. In correlated electron systems, such as Ca_1-xSr_xVO₃, the correlation effect of 3d electrons plays a leading role in determining the bandwidth. The electron correlation effect and crystal field splitting collaboratively determine whether the compounds will be in a metal state or in a Mott-insulator phase.     

Sr位Nd掺杂对SrBi$lt;sub$gt;2$lt;/sub$gt;Nb$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;9$lt;/sub$gt;性能的影响及机理研究

采用传统固相法制备了（Sr_1-3x/2A_x/2Nd_x）Bi₂Nb₂O₉（x=0,0.05,0.1和0.2）陶瓷,并系统研究了Nd离子取代Sr离子对SrBi₂Nb₂O₉性能的影响及其作用机理.研究结果表明：Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的介电常数和介电损耗随温度变化的行为具有明显的离子松弛极化特征.Nd³⁺对Sr²⁺的部分取代,导致Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉剩余极化强度P_r稍有下降,但其压电系数d₃₃却有所增加,根据铁电热力学理论,这是Nd³⁺对Sr²⁺取代导致材料介电常数增大所致.Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的居里温度（T_C）没有随Nd含量的增加而变化,拉曼光谱技术分析表明这是其NbO₆八面体畸变程度没有发生变化所致.Nd³⁺取代Sr²⁺提高了材料的介电常数ε_r、压电系数d₃₃、机电耦合系数K_p,同时降低了机械品质因数Q_m,但是谐振频率温度系数C值没有改变. 关键词： 压电陶瓷 介电性能 压电性能 拉曼光谱     

Synthesis and photoluminescence characteristics of (Sr, Ca)3B2O6:Eu for application in white light-emitting diodes

A series of yellow-green (Sr, Ca)₃B₂O₆:Eu phosphors have been synthesized using precursors prepared via a facile sol-gel route. The solid-solution phases crystallized to materials with the formula of Sr_3−x−yCa_xEu_yB₂O₆ with varied Ca²⁺ and Eu²⁺ contents. The emission peak centered at 540 nm under near-UV excitation exhibited a broad-band distribution in the range of 450-650 nm. The dependences of the luminescence intensity on the contents of Ca²⁺ substitution and Eu²⁺ dopant were also investigated. The composition in the host lattice sensitively affected the chromaticity index. Sr_1.21Ca_1.7Eu_0.09B₂O₆ (SCB:0.09Eu) was shown to possess the highest intensity and broadest emission band. Calcining temperature was shown to greatly influence the luminescent properties of SCB:0.09Eu. It is concluded that SCB:0.09Eu can be used as an efficient yellow-green phosphor for white light-emitting diodes (white LEDs) applications.     

Structural, magnetic and magnetotransport behavior of La0.7SrxCa0.3−xMnO3 compounds

A systematic investigation of the structural, magnetic and electrical properties of a series of nanocrystalline La_0.7Sr_xCa_0.3−xMnO₃ materials, prepared by high energy ball milling method and then annealed at 900 °C has been undertaken. The analysis of the XRD data using the Win-metric software shows an increase in the unit cell volume with increasing Sr ion concentration. The La_0.7Sr_xCa_0.3−xMnO₃ compounds undergo a structural orthorhombic-to-monoclinic transition at x=0.15. Electric and magnetic measurements show that both the Curie temperature and the insulator-to-metal transition temperature increase from 259 K and 253 K correspondingly for La_0.7Ca_0.3MnO₃ (x=0) to 353 K and 282 K, respectively, for La_0.7Sr_0.3MnO₃ (x=0.3). It is argued that the larger radius of Sr²⁺ ion than that of Ca²⁺ is the reason to strengthen the double-exchange interaction and to give rise to the observed increase of transition temperatures. Using the phenomenological equation for conductivity under a percolation approach, which depends on the phase segregation of ferromagnetic metallic clusters and paramagnetic insulating regions, we fitted the resistivity versus temperature data measured in the range of 50-320 K and found that the activation barrier decreased with the raising Sr²⁺ ion concentration.