基于虚拟仪器的扁钢内部缺陷超声三维成像方法研究

超声三维成像技术因其能够提供人体结构的立体信息,而被广泛的应用于医学诊断领域。然而,由于计算量大、成本高、速度慢,工业构件的超声三维成像技术却鲜见报道。弹簧扁钢是国民经济建设的重要钢材品种之一,通过超声三维成像技术测量扁钢内部缺陷的三维分布对于提高扁钢质量控制能力具有重要作用。为提高三维成像效率及降低成像系统的研发周期,提出高效的数据采集及三维图像重构方法,并基于虚拟仪器技术开发了三维图像重构软件。研究结果显示,基于超声水浸聚焦分层C扫描的数据提取方法能够满足三维成像的要求,所提出的数据重构方法及基于虚拟仪器的三维成像软件能够准确重构扁钢内部层片状缺陷的三维分布,是弹簧扁钢内部缺陷评价的有效方法。     

基于幅度调制的非线性超声相控阵成像方法*

超声相控阵是超声检测领域常用的材料缺陷定位和成像技术,可便捷快速地对裂纹、孔洞等缺陷进行成像。但是,传统超声相控阵方法对较小缺陷如闭合裂纹不太敏感。非线性超声信号因对材料性能退化以及微小缺陷敏感而广受关注。本文针对疲劳闭合裂纹检测,提出一种基于幅度调制的非线性超声相控阵成像方法,通过测量物理聚焦和虚拟聚焦两种聚焦模式下超声扩散场中的声能差,并将其作为非线性参量,实现疲劳裂纹闭合部分的定位成像和定量表征。将该法应用于7075铝合金试样疲劳裂纹的实验测量,并研究了扩散场信号延迟时间对非线性超声相控阵成像结果的影响。结果表明：相较于传统超声相控阵全聚焦法,基于幅度调制的非线性超声相控阵成像方法能够更准确地定位和成像疲劳裂纹闭合部分;延迟时间的选择对疲劳裂纹长度的表征精度影响较大,本文研究了该延迟时间的选择方法并实现了检测结果的优化。     

微小缺陷的非线性超声检测及其成像技术

采用通用超声检测设备并结合高通滤波技术获取了非线性超声的高次谐波信号,并将其用于薄板点焊焊核的微小缺陷检测及焊核的超声C扫描成像中。较之传统超声检测方法,采用非线性高次谐波检测薄板点焊焊核缺陷具有更高的时域分辨率及缺陷敏感度,能够更加准确的确定内部缺陷的位置及尺寸。此外,本研究还采用非线性高次谐波对薄板焊核进行超声成像分析,获得了清晰准确的焊核结构图像。非线性超声检测技术具有更高的检测效力,能够显著拓展检测系统的检测能力。      

超声非线性效应表征的动态小波指纹分析方法

针对结构早期损伤超声非线性检测中损伤表征问题,发展了一种基于动态小波指纹的超声信号分析方法,从超声信号的动态小波指纹分布中提取出一种可用于结构早期损伤表征的超声非线性特征参数。研究了小波基函数及分析尺度对超声非线性效应提取效果的影响,优选出对结构早期损伤敏感的小波基函数以及尺度范围。将提出的动态小波指纹分析方法应用于二次谐波及混频非线性超声检测信号分析,结果表明,动态小波指纹分析方法可有效提取出检测信号中的二次谐波及混频分量,基于小波指纹分布的非线性特征参数可用于板结构中微裂纹的定量表征.本文研究工作为结构早期损伤超声非线性检测中的弱非线性效应提取作了有益探索。      

非线性电磁超声对铝合金拉伸变形评价研究

非线性系数是描述材料中微纳尺度损伤的特征参量,非线性系数常通过接触式压电超声进行检测,但耦合剂引起的非线性一般是未知的,针对这一问题,提出了一种非接触式电磁超声非线性纵波检测方法。该方法基于洛伦兹力机理在试件表面产生的振动弹性波,利用不同拉伸载荷下所制备的损伤试件,分别利用压电超声、电磁超声进行非线性超声系数测量。实验结果表明:利用两种非线性超声检测的相对非线性系数与铝合金的拉伸形变呈单调关系,同时也论证了电磁超声纵波基于非线性理论对塑性变形评估的可行性。      

多层结构中脱粘缺陷的超声检测方法

固体火箭发动机多层装药结构中的脱粘类型、位置和尺寸决定了其对整体安全性能构成的威胁程度。该文研究了多层结构中脱粘缺陷的超声检测方法,通过对不同脱粘缺陷超声脉冲回波的特征分析与统计,实现缺陷的定性、定位和定量。首先,采集含有多类脱粘缺陷的粘接结构的超声脉冲回波信号,分析信号中主能量波包所代表的声程,提取五种声程的波峰时刻和幅值作为特征值,组建已知脱粘类型训练样本并输入至BP神经网络,实现特征值域到类别域的非线性映射,即脱粘类型分类;其次,采用阈值法确定缺陷的界面位置;最后,提出分段线性插值-相关性定量法将待检测缺陷的定量结果缩小到±2 mm以内。该文利用COMSOL有限元仿真和实验操作验证了多层粘接结构中脱粘缺陷的定性、定位和定量方法的可行性和可靠性。     

接触缺陷的振动调制超声导波检测技术研究

针对常规线性超声检测方法无法实现板结构接触类缺陷(如微裂纹、脱粘等)检测问题,将超声导波技术与振动声调制技术相结合,利用稀疏分布传感器发展了一种板结构中接触缺陷非线性超声检测方法。通过低频振动改变缺陷的接触状况,使得通过接触面的高频导波信号的相位和幅值受到调制。对受低频振动调制的超声导波二维时间序列进行时频分析,由于接触类缺陷的存在,在振动调制超声导波序列的时频分布上出现明显的低频振动频率分量。利用提取出的低频振动频率下的超声导波信号,进行了结构接触缺陷成像处理。检测试验表明,基于振动声调制的超声导波缺陷成像方法可以实现结构中的接触类缺陷检测。      

无缝钢轨中温度对应力非线性超声检测的影响

研究了温度与应力共同作用下的非线性超声响应规律。构建了纵波在无缝钢轨内传播的数学模型,将传统原子间势能引入非线性波动方程,得到了无缝钢轨在自由状态及受约束状态两种情况下超声非线性系数随温度变化的函数关系。在理论分析的基础上,进行了无缝钢轨受约束时内部温度应力变化的实物模拟实验,获得的非线性系数变化趋势与理论预期相一致。研究结果表明:温度和应力都对固体介质非线性影响明显,介质非线性系数随着温度的升高而增大,随着内部压应力的增加而减小。因此,当利用非线性系数检测钢轨纵向应力时,需要对温度的影响进行补偿。      

应用混频超声检测微小缺陷

高端飞行器的可靠性往往受限于其发动机内部盘、板等构的结构强度和使用寿命,因此对这类部件的无损检测在制造业上具有巨大需求。超声检测作为一种应用广泛、高效、环保的检测方法,常常被应用于这类构件的检测中。但是,大厚度盘、板类构件内的微小缺陷反射能力弱,常规超声脉冲反射法无法进行有效检测。为实现大厚度盘、板类构件内部微小缺陷的识别和定位,采用共线异侧纵波混频法,通过和差频信号特征识别微小缺陷;研究缺陷埋深变化对混频效果的影响,通过测量和差频信号幅值变化,实现微小缺陷的深度定位。结果表明：该方法可有效识别7075铝合金中埋深80mm的φ0.2mm横孔微缺陷,且可实现微小缺陷的深度定位。     

镁合金疲劳早期非线性超声在线检测实验研究

材料力学性能早期退化在微观结构上表现为位错和晶带滑移等缺陷的变化,在超声波检测中表现为高次谐波的产生.发展了一套在材料疲劳实验机上直接在线测量超声非线性系数的实验系统,在相同条件下测量了同一试件在不同输入电压下的二次谐波和基波幅度,二次谐波幅度和基波幅度平方的线性相关系数r=0.9996,表明实验系统是可靠的.同时利用该系统进行了三组不同加载应力的镁合金试件疲劳在线非线性超声检测实验.实验结果表明,在疲劳寿命的55％之前,超声非线性系数对疲劳加载周数具有很高的灵敏度.因此,利用超声非线性系数可以很好地表征镁合金的疲劳早期退化.另外在中低周疲劳范围内,加载应力的大小以及拉-拉和拉-压疲劳模式的变化对实验结果没有明显的影响.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.