磁性纳米材料的新进展

文章介绍了纳米结构的巨磁电阻效应材料、纳米微晶软磁材料、纳米微晶稀土永磁材料以及纳米磁制冷工质的一些新进展．     

纳米微晶材料的结构和性质

纳米微晶材料是纳米量级晶粒所构成的多晶物质,其晶界区域中存在与长程有序晶态和短程有序非晶态结构不相同的“气体状”的结构。本文讨论了纳米微晶材料的制备方法、结构特点和奇异性质及其在材料科学中的应用。     

纳米微晶材料的结构和性质

纳米微晶材料是纳米量级晶粒所构成的多晶物质,其晶界区域中存在与长程有序晶态和短程有序非晶态结构不相同的“气体状”的结构。本文讨论了纳米微晶材料的制备方法、结构特点和奇异性质及其在材料科学中的应用。     

微晶结构对氟氧化物玻璃陶瓷发光特性的影响

制备了成分相同的Er3+/Yb3+共掺氟氧化物玻璃和氟氧化物玻璃陶瓷样品，x射线衍射谱和荧光光谱表明热处理后玻璃陶瓷中形成了纳米结构的微晶，根据Judd Ofelt理论计算和差热曲线分析，证实稀土离子掺入PbF2微晶中.分别计算了热处理前后微晶态部分在玻璃体中所占的比例. 关键词： 微晶结构 玻璃陶瓷 荧光光谱     

壳聚糖中ZnS:Mn纳米微晶的制备及其发光特性

利用壳聚糖通过离子络合的方法制备了ZnS:Mn纳米微晶。壳聚糖含有一些极性基团,既是分散纳米微晶的有机介质,起到孤立微粒、控制粒度的作用,又具有表面修饰作用。通过改变反应物的浓度,得到微晶的尺寸在4.0～7.0nm(计算值).用激发和发射光谱观察了量子尺寸效应造成的光学性质的变化。用FTIR光谱分析了微晶和壳聚糖间的络合作用。     

纳米Cu3N薄膜的制备与性能

采用柱状靶多弧直流磁控溅射法，100℃基底温度下在玻璃衬底上制备了纳米氮化铜(Cu3₃N)薄膜.用x射线衍射研究了不同氮气分压对Cu3₃N薄膜晶体结构 及晶粒尺寸的影响.结果显 示薄膜由Cu3₃N和Cu的纳米微晶复合而成，其中Cu3₃N纳米微晶具有 立方反ReO3₃结构.通 过原子力显微镜对薄膜表征显示，膜表面比较光滑，具有较低的粗糙度.x射线光电子能谱对 薄膜表面的成分分析表明，Cu3 _{关键词： 氮化铜薄膜 多弧直流磁控溅射 3}结构')" href="#">立方反ReO3₃结构     

纳米ZnO微晶的合成及其发光特性

以醋酸锌和尿素为主要原料,利用沉淀-水热法一步合成了纳米ZnO微晶。用XRD,TEM,FTIR等测试技术及光致发光光谱(PL)对纳米ZnO微晶进行了表征,并对其发光特性进行了分析。研究表明：该合成方法操作简单,得到的纳米ZnO颗粒基本无团聚,结晶性较好,平均粒径约为17.2 nm,并在500～750 nm范围内出现宽的PL峰, 呈现出纳米材料的发光特征。     

水热法制备蒲公英状微晶和纳米带状β-SrV2O6及微结构表征

"利用Sr(NO3)2和V2O5作为反应前驱物, 已二酸作为矿化剂,在水热法反应条件下成功制备了微米尺寸蒲公英状及纳米尺寸的纳米带状β-SrV2O6晶微体. 通过粉末X衍射和电子显微镜的研究分析,结果表明所得的反应生成物属于正交晶系,其晶格常数为a=9.694 ?,b=3.687 ?,c=12.570 ? (空间群Pnma). 电子显微结果表明蒲公英状的微晶是揭示许多棒状微晶呈球型放射状构成的图案,而纳米带状的β-SrV2O6则呈现显示良好的挠性. 两者的微晶体生长方向沿h010i晶轴方向. 详细探讨了水     

氟氧化物微晶玻璃散射效率的研究

本文利用离散偶极子近似[1](Discrete Dipole Approximation,简称DDA),从理论上系统地探究了氟氧化物微晶玻璃纳米微晶的尺寸、周围介质折射率和多粒子周期性排布结构对散射效率的影响,提出降低微晶玻璃散射效率的有效途径,成功解释了氟氧化物微晶玻璃中的"超透明"现象。     

稀土配合物Tb(Sal)3·3H2O纳米微晶的制备及发光性质

利用化学沉淀法制备了不同粒径的Tb(Sal)_3·3H_2O纳米微晶和Tb(Sal)_3·3H_2O稀土配合物。利用元素分析、红外光谱、热重分析和透射电镜表征了纳米微晶和稀土配合物的结构、热性质和粒径大小。利用荧光激发和发射光谱、紫外光谱探讨了有机配体和中心离子之间的能量传递过程。结果显示Tb(Sal)_3·3H_2O纳米微晶的粒径主要分布在50～250nm区域并且发出较强铽(Ⅲ)离子的特征荧光。这些结果为进一步扩展稀土配合物在发光材料以及磁材料中的应用奠定了基础。     

复合添加剂BA1摩擦化学的FTIRM光谱法研究

采用微区红外光谱技术（ＦＴＩＲＭ）研究抗磨添加剂（简称ＢＡ１）的抗磨机理，通过改变添加剂的浓度，摩擦载荷的大小和选择不同的摩擦时间，观察摩擦前后的物性变化，分析磨痕的红外光谱图，推断其作用机理，结果表明，ＢＡ１在摩擦过程中发生氧化分解反应，最终在摩擦副基质上形成一层光滑致密的聚合物膜，致使其摩擦系数减小。     

Fabrication of durable hydrophobic surfaces through surface texturing

Low surface energy polymer thin-films can be applied to surfaces to increase hydrophobicity and reduce friction for a variety of applications. However, wear of these thin films, resulting from repetitive rubbing against another surface, is of great concern. In this study, we show that highly hydrophobic surfaces with persistent abrasion resistance can be fabricated by depositing fluorinated carbon thin films on sandblasted glass surfaces. In our study, fluorinated carbon thin films were deposited on sandblasted and as-received smooth glass using deep reactive ion etching equipment by only activating the passivation step. The surfaces of the samples were then rubbed with FibrMet abrasive papers in a reciprocating motion using an automatic friction abrasion analyzer. During the rubbing, the static and kinetic friction forces were also measured. The surface wetting properties were then characterized using a video-based contact angle measuring system to determine the changes in water contact angle as a result of rubbing. Assessment of the wear properties of the thin films was based on the changes in the water contact angles of the coated surfaces after repetitive rubbing. It was found that, for sandblasted glass coated with fluorinated carbon film, the water contact angle remained constant throughout the entire rubbing process, contrary to the smooth glass coated with fluorinated carbon film which showed a drastic decrease in water contact angle with the increasing number of rubbing cycles. In addition, the static and kinetic friction coefficients of the sandblasted glass were also much lower than those of the smooth glass.     

Effect of surface film on sliding friction and wear of copper-impregnated metallized carbon against a Cu-Cr-Zr alloy

A block-on-ring wear test was performed between a copper-impregnated metallized carbon brush and a Cu-Cr-Zr alloy ring under ambient environment. After 50 km of rubbing at 20 A electrical current and 111 kPa normal pressure at a constant velocity of 25 km/h, a surface film, which was composed of Cu₂O, CuO, C and water, formed on the copper alloy ring due to graphite transfer from the brush to the copper alloy and oxidation of the copper. A second series of friction and wear tests was carried out both with and without this initial surface film and at different electrical currents. The friction coefficient and wear mass loss were compared. The results showed that the initial surface film could reduce the friction coefficient in the presence of an electrical current, but in the absence of an electrical current, the film's lubricating performance gradually degraded as the test progressed. Wear mass losses caused by the rubbing of the brushes against the rings having an initial surface film were lower when the electrical currents were 0 A, 10 A and 15 A, respectively, while the situation was reversed when the electrical current was 20 A, i.e., the wear mass loss of the brush specimen rubbing against a ring with an initial surface film was higher than that of a ring without it.     

Competition between anchoring and reversible photo-induced alignment of a nematic liquid crystal

We investigated the alignment induced on a nematic liquid crystal (LC) by a photo-aligned polymer film with azo-dye side groups. The orientation of the LC molecules can be manipulated in a reversible manner by irradiating the film with polarized light. We analyzed the competition between the orientation induced by the main chain, through rubbing of the film and that induced by the photo-aligned polymer. Anchoring strength for the different processing conditions are reported. The changes in film morphology caused by rubbing or photo-alignment could be captured by atomic force microscopy. The reversibility of the photo-induced alignment and the competition between the two anchoring mechanisms may allow recording and erasing of information in a LC display. PACS 61.30.-v; 61.30.Gd     

一种新的双偶氮染料掺杂聚合物薄膜的光致双折射及偏振全息的研究

作为一种有可能作为永久信息存储的材料,合成出一种新的双偶氮材料(BA1)。当样品被波长为532nm的光激发时,几乎大部分BA1分子从反-反态转化到顺-顺态,产生了光致双折射。因此,研究了BA1分子掺杂的PMMA薄膜的光致双折射和透过信号与入射光强度的关系。实验结果表明:透过信号强度随着泵浦光的增强而增强。通过偏振态互相平行(SS)和垂直(SP)的两束偏振光用来研究偏振全息存储,结果表明SP光栅形成的衍射信号要比SS光栅的衍射信号强很多。     

基于空穴注入层摩擦定向的偏振蓝光聚合物电致发光器件

研究了利用摩擦空穴注入层3,4-乙撑二氧噻吩:聚苯乙烯磺酸(PEDOT:PSS)作为定向层实现聚芴(PFO)薄膜的偏振电致发光,蓝光的色坐标为(0.20,0.21).从聚合物薄膜的紫外可见吸收和光致发光偏振特性,研究了不同定向层摩擦强度、退火温度以及退火时间下PFO薄膜的二向色性,并证明退火温度是决定器件偏振性能的关键因素.当摩擦强度为25 mm退火温度和时间分别为200℃和30 min时,得到较好的偏振性能,器件的电致发光偏振率约为3. 关键词： 偏振发光 摩擦定向 聚合物电致发光 空穴注入层     

Core–corona PSt/P(BA–AA) composite particles by two-stage emulsion polymerization

Raspberry-shaped composite particles with polystyrene (PSt) as core and poly(n-butyl acrylate-co-acrylic acid) (P(BA–AA)) as corona were synthesized via emulsion polymerization. The random copolymer, P(BA–AA), was pre-prepared and used as a polymeric surfactant, its emulsifying properties adjusted by changing the mass ratio of BA and AA. The morphology of the resulting core–corona composite particles, P(St/P(BA–AA)), could be regulated and controlled by varying the concentrations of P(BA–AA) or the mass ratio of BA:AA in P(BA–AA). The experimental results indicate that 3.0–6.0 wt% of P(BA–AA) is required to obtain stable composite emulsions, and P(BA–AA) with a mass ratio of BA:AA = 1:2 is able to generate distinct core–corona structures. A mechanism of composite particle formation is proposed based on the high affinity between the PSt core and the hydrophobic segments of P(BA–A). The regular morphology of the colloidal film is expected to facilitate potential application of core–corona particles in the field of light scattering. Furthermore, the diversity of core–corona particles can be expanded by replacing P(BA–AA) corona particles with other amphiphilic particles.     

Superhydrophobic and luminescent methylsilicone resin film

The europium complex, Eu(BA)₃Phen was introduced to the methylsilicone resin film, the investigation showed that the variation of the morphology and surface components of the film was not obvious comparing to methylsilicone resin film, and the superhydrophobicity of the as-prepared film was still retained. Furthermore, the film showed excellent luminescent property, the red light can be observed.     

Azimuthal anchoring energy at the interface between a nematic liquid crystal and a PTFE substrate

The azimuthal anchoring energy of the nematic liquid crystal 4-pentyl-4'-cyanobiphenil (5CB) on a poly(tetrafluoroethylene) (teflon, PTFE) film is measured for the first time. The PTFE film is deposed using the Wittmann and Smith technique which consists on rubbing a bar of this polymer against a glass substrate at a controlled temperature and pressure. Measurements of the azimuthal anchoring energy are made with a reflectometric technique which provides high accuracy and sensitivity. The dependence of the azimuthal anchoring energy on temperature and on the rubbing pressure is investigated. The extrapolation length remains virtually constant in the whole temperature range of the nematic phase except for an increase of 25% close to the clearing temperature. The azimuthal anchoring energy is somewhat strong and increases with increasing the deposition pressure of PTFE. The observation of a relevant pre-transitional anisotropy of the reflection coefficients in the isotropic phase proves that the surface interactions favor an excess of orientational order. Ageing of the anchoring energy and gliding of the easy axis are experimentally observed. Both these phenomena suggest the presence of an anisotropic adsorbed layer of nematic molecules on the PTFE film.     

Enhancing nucleation and controlling crystal orientation by rubbing/scratching the surface of a thin polymer film

We used the tip of an atomic force microscope (AFM) in the contact mode to scratch/rub the surface of a glassy polymer thin film, i.e., isotactic polystyrene (i-PS) at room temperature. After subsequent isothermal crystallization, an extremely high nucleation density of edge-on crystals within the rubbed region or at the edge of the scratched area was observed. Furthermore, a transition from edge-on to flat-on lamellae occurred beyond a certain distance from the edge of the scratched region. Our results demonstrate that both, soft rubbing or hard scratching, allow to lower the nucleation barrier for polymer crystallization and to control the orientation of the resulting crystalline lamellae. The role of scratching/rubbing on chain deformation and its relation to nucleation and crystal orientation in polymer thin films is discussed.