Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

All‐optical modulation based on silicon quantum dot doped SiOx:Si‐QD waveguide

All‐optical modulation based on silicon quantum dot doped SiO_x:Si‐QD waveguide is demonstrated. By shrinking the Si‐QD size from 4.3 nm to 1.7 nm in SiO_x matrix (SiO_x:Si‐QD) waveguide, the free‐carrier absorption (FCA) cross section of the Si‐QD is decreased to 8 × 10⁻¹⁸ cm² by enlarging the electron/hole effective masses, which shortens the PL and Auger lifetime to 83 ns and 16.5 ps, respectively. The FCA loss is conversely increased from 0.03 cm⁻¹ to 1.5 cm⁻¹ with the Si‐QD size enlarged from 1.7 nm to 4.3 nm due to the enhanced FCA cross section and the increased free‐carrier density in large Si‐QDs. Both the FCA and free‐carrier relaxation processes of Si‐QDs are shortened as the radiative recombination rate is enlarged by electron–hole momentum overlapping under strong quantum confinement effect. The all‐optical return‐to‐zero on‐off keying (RZ‐OOK) modulation is performed by using the SiO_x:Si‐QD waveguides, providing the transmission bit rate of the inversed RZ‐OOK data stream conversion from 0.2 to 2 Mbit/s by shrinking the Si‐QD size from 4.3 to 1.7 nm.     

Theoretical Design of a Pump‐Free Ultrahigh Efficiency All‐Optical Switching Based on a Defect Ring Optical Waveguide Network

A theoretical design of a defect ring optical waveguide network is proposed to construct a pump‐free ultrahigh efficiency all‐optical switch. This switch creates ultrastrong photonic localization and causes the nonlinear dielectric in the defect waveguide to intensely respond. At its ON state, this material defect without Kerr response helps to produce a pair of sharp pass bands in the transmission spectrum to form the dual channel of the all‐optical switch. When it is switched to its OFF state, the strong Kerr response induced refractive index change in the high nonlinear defect waveguide strongly alters the spectrum, leading to a collapse of the dual channels. Network equation and generalized eigenfunction method are used to numerically calculate the optical properties of the switch and obtain a threshold control energy of about 2.90 zJ, which is eight orders of magnitude lower than previously reported. The switching efficiency/transmission ratio exceeds 3× 10¹¹, which is six orders of magnitude larger than previously reported. The state transition time is nearly 108 fs, which is approximately two orders of magnitude faster than the previously reported shortest time. Furthermore, the switch size can be much smaller than 2.6 µm and will be suitable for integration.     

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles for strained‐silicon surface enhanced Raman spectroscopy

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles deposited onto strained‐silicon layers grown on graded Si_1−xGe_x virtual substrates are utilized for selective amplification of the Si–Si vibration mode of strained silicon via surface‐enhanced Raman scattering spectroscopy. This solution‐based technique allows rapid, highly sensitive and accurate characterization of strained silicon whose Raman signal would usually be overshadowed by the underlying bulk SiGe Raman spectra. The analysis was performed on strained silicon samples of thickness 9, 17.5 and 42 nm using a 488 nm Ar⁺ micro‐Raman excitation source. The quantitative determination of strained‐silicon enhancement factors was also made. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigation of the substituent specific cross‐interaction effects on 13C NMR of the CN bridging group in substituted benzylidene anilines

The substituent effect on ¹³C NMR of the C?N in benzylidene anilines XPhCH?NPhY was investigated, in which the substituents X and Y are in p‐position or in m‐position of the two aromatic rings. The substituent effects including the inductive effects of X and Y, the conjugative effects of X and Y, and the substituent specific cross‐interaction effect were put into one model to quantify the ¹³C NMR chemical shift δ_C(C?N) of the C?N in XPhCH?NPhY. A penta‐parameter correlation equation with correlation coefficient 0.9975 and standard error 0.17 ppm was obtained for 80 samples of compounds. The result shows that the substituents X and Y have an opposite effect on the δ_C(C?N). The electron‐withdrawing effects of X decrease the δ_C(C?N); while the electron‐donating effects of X increase the δ_C(C?N). In contrast, the electron‐withdrawing effects of Y increase the δ_C(C?N); while the electron‐donating effects of Y decrease the δ_C(C?N). A new substituent specific cross‐interaction effect parameter Δσ² was proposed, which indicates that the most substituent specific cross‐interaction effect exists in the pair of max electron‐withdrawing group (EWG) and max electron‐donating group (EDG) or the pair of max EDG and max EWG. Further to verify the obtained correlation equation, 15 samples of model compounds were prepared and their δ_C(C?N) was measured in this work. The predicted δ_C(C?N) values with the obtained equation are in good agreement with the measured ones for these prepared compounds, which confirmed the reliability of the obtained equation. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectral studies of Zr4+‐rich BaZrxTi1−xO3(0.5⩽x⩽1.00) phase diagram

This paper reports a systematic study of the composition and the temperature‐dependent‐Raman spectra of Zr⁴⁺‐rich BaZr_xTi_1−xO₃ (BZT) ceramic compositions (0.50⩽x⩽1.00). On the basis of the dielectric behavior of Zr rich BZT ceramics, the observed relaxor behavior has been hypothesized as a result of increasing long‐range interactions of nanosized, Ti⁴⁺‐rich polar regions in a Zr⁴⁺‐rich nonpolar matrix. Beyond an optimum concentration of BaTiO₃ (BT) in the nonpolar matrix of BaZrO₃ (x⩽0.75), a critical size and density of the polar regions is reached when the polar clusters start showing the relaxor like behavior, which finally show classical relaxor behavior for compositions with x = 0.5 and 0.6. This hypothesis is strongly supported from the Raman data on Zr‐rich BZT presented in this paper. Well‐defined BT Raman spectra for 5% BT in BZT composition were recorded, which followed completely up to the 50% Ti addition in the BZT samples. The temperature‐dependent Raman spectra collected on the BZT ceramics far beyond the dielectric transition temperatures supported the existence of the nano‐polar BT regions, like in typical relaxor samples. The full width at half‐maximum (FWHM), integrated intensity of the peaks in the Raman spectra has been analyzed to further support the conclusions. Copyright © 2008 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Enhanced refractive index well-confined planar and channel waveguides in KTiOPO<Subscript>4</Subscript> produced by MeV C<Superscript>3+</Superscript> ion implantation with low dose

We report on the fabrication and characterization of planar and channel waveguides in KTiOPO₄ crystals by 6.0 MeV C³⁺ ion implantation with the dose of 1×10¹⁴ ions/cm². The dark mode spectroscopy of the planar waveguide was measured using a prism coupling arrangement. An increase of the both n _x and n _y refractive indices induced by the annealing after implantation is believed to be responsible for waveguide formation. The bright near-field intensity distribution of the transverse-electric and transverse-magnetic modes in the annealed channel waveguide was collected and studied by end-coupling method.     

High‐performance a‐Si1–xOx:H/c‐Si heterojunction solar cells realized by the a‐Si:H/a‐Si1–xOx:H stack buffer layer

We used amorphous silicon oxide (a‐Si_1–xO_x:H) and microcrystalline silicon oxide (µc‐Si_1–xO_x:H) as buffer layer and p‐type emitter layer, respectively, in n‐type silicon hetero‐junction (SHJ) solar cells. We proposed to insert a thin (2 nm) intrinsic amorphous silicon (a‐Si:H) thin film between the thin (2.5 nm) a‐Si_1–xO_x:H buffer layer and the p‐layer to form a stack buffer layer of a‐Si:H/a‐Si_1–xO_x:H. As a result, a high open‐circuit voltage (V_OC) and a high fill factor (FF) were obtained at the same time. Finally, a high efficiency of 19.0% (J_SC = 33.46 mA/cm², V_OC = 738 mV, FF = 77.0%) was achieved on a 100 μm thick polished wafer using the stack buffer layer.

     

Lithium solvation in a PMMA membrane plasticized by a lithium‐conducting ionic liquid based on 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide

The Raman and Infrared (IR) spectra of poly(methyl methacrylate) (PMMA) membranes plasticized by ionic liquids of the (1 − x)[1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI)],xLiTFSI type, where BMI⁺ is the 1‐butyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, are analyzed for a lithium bis(trifluoromethane sulfone)imide (LiTFSI) mole fraction x = 0.23 and PMMA contents from 0 to 50 wt%. The lithium is found to have an average coordination of about three CO groups and less than one TFSI⁻ anion. It plays the role of a cross‐linker between the ester groups of PMMA and the nonvolatile ionic liquid. Addition of PMMA to the (1 − x)(BMITFSI),xLiTFSI ionic liquid lowers the conductivity but might improve the lithium transference number by transforming the [Li(TFSI)₂]⁻ anionic clusters present in the pure ionic liquid into a mixed coordination by ester groups and TFSI⁻ anions. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparison of the 13C (C = N) chemical shifts of substituted N‐(phenyl‐ethylene)‐anilines and substituted N‐(benzylidene)‐anilines

Comparison of ¹³C NMR of C = N bond chemical shifts δ_C(C = N) in substituted N‐(phenyl‐ethylene)‐anilines XArC(Me) = NArY (XPEAYs) with that in substituted N‐(benzylidene)‐anilines XArCH = NArY (XBAYs) was carried out. The δ_C(C = N) of 61 samples of XPEAYs were measured, and the substituent effect on their δ_C(C = N) were investigated. The results show the factors affecting the δ_C(C = N) of XPEAYs are quite different from that of XBAYs. A penta‐parameter correlation equation was obtained for the 61 compounds, which has correlation coefficient 0.9922 and standard error 0.12 ppm. The result indicates that, in XPEAYs, the inductive effects of substituents X and Y are major factors affecting the δ_C(C = N), while the conjugative effect of them have very little effect on the δ_C(C = N) and can be ignored. The substituent‐specific cross‐interaction effects between X and Y and between Me of C = N bond and substituent Y are important factors affecting the δ_C(C = N). Also, the excited‐state substituent parameter of substitute Y has certain contribution to the δ_C(C = N). Copyright © 2015 John Wiley & Sons, Ltd.     

Raman spectroscopy of very small Cd1−xCoxS quantum dots grown by a novel protocol: direct observation of acoustic‐optical phonon coupling

Glass‐embedded Cd_1−xCo_xS quantum dots (QDs) with mean radius of R ≈ 1.70 nm were successfully synthesized by a novel protocol on the basis of the melting‐nucleation synthesis route and herein investigated by several experimental techniques. Incorporation of Co²⁺ ions into the QD lattice was evidenced by X‐ray diffraction and magnetic force microscopy results. Optical absorption features with irregular spacing in the ligand field region confirmed that the majority of the incorporated Co²⁺ ions are under influence of a low‐symmetry crystal field located near to the Cd_1−xCo_xS QD surface. Electron paramagnetic resonance data confirmed the presence of Co²⁺ ions in a highly inhomogeneous crystal field environment identified at the interface between the hosting glass matrix (amorphous) and the crystalline QD. The acoustic‐optical phonon coupling in the Cd_1−xCo_xS QDs (x ≠ 0.000) was directly observed by Raman measurements, which have shown a high‐frequency shoulder of the longitudinal optical phonon peak. This effect is tuned by the size‐dependent sp‐d exchange interaction due to the magnetic doping, causing variations in the coupling between electrons and longitudinal optical phonon. Copyright © 2013 John Wiley & Sons, Ltd.     

On the Plasma Chemistry of an RF Discharge Containing Aluminium Tri‐Isopropoxide Studied by FTIR Spectroscopy

In Ar and Ar/N₂ radio frequency (RF) discharges with admixtures of aluminium tri‐isopropoxide (ATI) the fragmentation of this metal‐organic precursor was studied by means of Fourier Transform Infrared (FTIR) spectroscopy using an optical long path cell providing an optical length of l = 17.2 m. The experiments were performed in an asymmetric capacitively coupled process plasma at a frequency of f = 13.56 MHz and at pres‐sure values in the range of p = 1–10.5 Pa. The discharge power was chosen between P = 10–100 W. Using FTIR spectroscopy the evolution of the concentrations of ATI and of six stable molecules, CH₄, C₂H₂, C₂H₄, C₂H₆, CO and HCN, was monitored under flowing conditions at gas flows of Φ_total = 0.5–14.5 sccm in the discharge. The concentrations of the reaction products were measured tobe between 2 x 10¹² molecules cm^–3 as e.g. found for C₂H₄and C₂H₆, and 5 x 10¹³ molecules cm^–3, as e.g. in the case of CO. In the plasma a complete dissociation of the precursor ATI was found at a power value of about P = 80 W independent on the admixture of Ar or N₂. The fragmentation efficiency (F_E) of the reaction products which originate from the ATI molecules ranges between 0.2 and 4 x 10¹⁶ molecules J^–1 while the fragmentation rate (F_R) reached up to 2.5 x 10¹⁸ molecules s^–1. The multi component detection ability of the spectrometer served to analyse the carbon balance of the by‐product formation. For all experiments, the carbon balance never exceeded 25%. Therefore, in the plasmas the majority of the provided carbon is most likely deposited at the reactor walls or forms dust particles or higher molecular C_xH_y. The conversion efficiencies (C_E) of the produced molecular species ranges between 0.1 x 10¹⁵ molecules J^–1 for C₂H₄ and 5 x 10¹⁵ molecules J^–1 for C₂H₆ depending on the discharge conditions of the RF plasma. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Direct detection of carrier traps in Si solar cells after light‐induced degradation

In solar cells fabricated from boron‐doped Cz‐Si wafers minority and majority carrier traps were detected by deep level transient spectroscopy (DLTS) after so‐called “light‐induced degradation” (LID). The DLTS signals were detected from mesa‐diodes with the full structure of the solar cells preserved. Preliminary results indicate metastable traps with energy levels positioned at E_V + 0.37 eV and E_C – 0.41 eV and apparent carrier capture cross‐sections in the 10^–17–10^–18 cm² range. The concentration of the traps was in the range of 10¹²–10¹³ cm^–3. The traps were eliminated by annealing of the mesa‐diodes at 200 °C. No traps were detected in Ga‐doped solar cells after the LID procedure or below the light protected bus bar locations in B‐doped cells. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Short‐time photodecay dynamics of meso‐tetra(p‐hydroxyphenyl)porphine in the condensed phase explored via resonance Raman spectroscopy and density functional theory calculation

Resonance Raman (RR) spectra of free‐base meso‐tetra(p‐hydroxyphenyl)porphine(THPP) were obtained with 397.9, 416 and 514 nm excitation wavelengths, and density functional calculations were carried out to help the elucidation of the photorelaxation dynamics of Soret (B_x and B_y bands) electronic transitions and the RR spectra of THPP. The RR spectrum indicates that the Franck–Condon (FC) region photorelaxation dynamics for the S₀ → S₅ excited electronic state is predominantly along the totally symmetric C_m phC stretching and the C_βC_β stretchingand simultaneously along the asymmetric (C_mC_α)as stretching, ν(phC  C)asstretching, δ(NH)s and γ(C_βH) vibrational relaxation processes, while that for S₀ → S₄ electronic state is predominantly along the C_m phC stretching and pyrrole breathing. The excited‐state structural dynamics of THPP determined from the RR spectra shows that internal conversion (IC) B_y → B_x electronic relaxation occurs in tens of femtoseconds, and the short‐time dynamics is interpreted using the time‐dependent wave packet theory and Herzberg–Teller (vibronic coupling) contributions. Copyright © 2010 John Wiley & Sons, Ltd.     

Rotational disorder in 2‐piperidyl‐5‐nitro‐6 ‐methylpyridine: structural phase transition and its vibrational characteristics

X‐ray diffraction (XRD) studies have shown that 2‐piperidyl‐5‐nitro‐6‐methylpyridine, C₁₁H₁₅N₃O₂, undergoes a structural phase transition at T = 240 K. The room temperature structure is tetragonal, space group I4₁/a, with the unit‐cell dimensions a = 13.993(2) and c = 23.585(5) Å. The pyridine ring takes trans conformation with respect to the piperidine unit. While pyridine is well ordered, the piperidine moiety shows apparent disorder resulting from a libration about the linking N C bond. The low‐temperature phase is monoclinic, space group I2/a. Contraction of the unit‐cell volume by 2.3% at 170 K enables the C H···O linkage between the molecules of the neighbouring stacks. As result, the asymmetric unit becomes bi‐molecular. The thermal librations of the piperidine and methyl groups become considerably reduced at 170 K and nearly fully reduced at about 100 K. The IR spectra and polarised Raman spectra agree with the X‐ray structure and confirm the disorder effect on the piperidine ring. The assignment of the bands observed was made on the basis of DFT chemical quantum calculations. Copyright © 2008 John Wiley & Sons, Ltd.     

Three‐photon absorption properties of a novel symmetrical Carbazole derivative having terminal 1,10‐phenanthroline rings via carbon–nitrogen (C = N) double bond

Three‐photon absorption (3PA) properties of symmetric‐type carbazole derivatives show great potential for application in light‐activated therapy and optical limiting. A novel symmetrical carbazole derivative (abbreviated as POCP) with end‐groups of 1,10‐phenanthroline rings as the donor moieties, chained via carbon–nitrogen (C = N) double bond, has been synthetized and its three photon absorption properties has been also determined by using a Q‐switched Nd: YAG laser pumped with 30 ps pulses at 1064 nm in dimethylformamide. The measurement of 3PA cross‐section of this compound is performed by open aperture Z‐scan and σ_3PA is 481 × 10^–78 cm⁶ ? s²/photon² for the transition S₀ → S₁. The influence of the molecular structure of this compound on three‐photon absorption cross‐sections is discussed micromechanically by Austin model 1 and Zerner's Intermediate Neglect of Differential Overlap/S method. Copyright © 2012 John Wiley & Sons, Ltd.     

Substituent effects on the 13C NMR chemical shifts of the imine carbon in N‐(4‐X–benzylidene)‐4‐(4‐Y–styryl) anilines

Long‐range electronic substituent effects were targeted using the substituent dependence of δ_C(C═N), and specific cross‐interactions were explored extendedly. A wide set of N‐(4‐X–benzylidene)‐4‐(4‐Y–styryl) anilines, p‐X–C₆H₄CH═NC₆H₄CH═CHC₆H₄–p‐Y (X = NMe₂, OMe, Me, H, Cl, F, CN, or NO₂; Y = NMe₂, OMe, Me, H, Cl, or CN) were prepared for this study, and their ¹³C NMR chemical shifts δ_C(C═N) of C═N bonds were measured. The results show that both the inductive and resonance effects of the substituents Y on the δ_C(C═N) of p‐X–C₆H₄CH═NC₆H₄CH═CHC₆H₄–p‐Y are less than those of the substituents Y in p‐X–C₆H₄CH═NC₆H₄–p‐Y. Moreover, the sensitivity of the electronic character of the C═N function to electron donation/electron withdrawal by the substituent X or Y attenuates as the length of the conjugated chain is elongated. It was confirmed that the substituent cross‐interaction is an important factor influencing δ_C(C═N), not only when both X and Y are varied but also when either X or Y is fixed. The long‐range transmission of the specific cross‐interaction effects on δ_C(C═N) decreases with increasing conjugated distance between X and Y. The results of this study suggest that there is a long‐range transmission of the substituent effects in p‐X–C₆H₄CH═NC₆H₄CH═CHC₆H₄–p‐Y. Copyright © 2012 John Wiley & Sons, Ltd.     

Gas‐phase Acidities of 2‐Aryl‐2‐chloro‐1,1,1‐trifluoroethanes and Related Compounds. Experimental and Computational Studies

The gas‐phase acidities (GA) of 2‐aryl‐2‐chloro‐1,1,1‐trifluoroethanes ( 1a ), 2‐aryl‐2‐fluoro‐1,1,1‐trifluoroethanes ( 2a ), and related compounds, XC₆H₄CH(Z)R where Z = Cl ( 1 ) or F ( 2 ) and R = C₂F₅ ( b ), t‐C₄F₉ ( c ), C(CF₃)₂C₂F₅ ( d ), C(CF₃)₂Me ( e ), Me ( f ), H ( g ), were investigated experimentally and computationally. On the basis of an excellent linear correlation (R² > 0.99) of acidities of 1c , 1d , 1e , 1f and 2c , 2d , 2e , 2f where there is no fluorine atom at β‐position to the deprotonation site with the corrected number of fluorine atoms contained in the fluorinated alkyl group, the extent of β‐fluorine negative hyperconjugation of the CF₃ and C₂F₅ groups (ΔG^o_β‐F) was evaluated. The GA_el values given by subtraction ΔG^o_β‐F from the apparent GA value were considered to represent the electronic effect of the substituent X. The substituent effects on the GA_el values and GA values for 1c , 1d , 1e , 1f and 2c , 2d , 2e , 2f were successfully analyzed in terms of the Yukawa–Tsuno equation. The variation of resonance demand parameter r^? with the R group observed for various XC₆H₄CH(Z)R was linearly related to the GA (GA_el) value of the respective phenyl‐substituted fluorinated alkanes. On the other hand, the corresponding correlation for the ρ values provided three lines for ArCH(Cl)R, ArCH(F)R and ArCH₂R, respectively. These results supported our previous conclusion that the r^? and ρ values are governed by the thermodynamic stability of the parent ion (ring substituent = H). Other factors arising from an atom bonded to the acidic center also influence the ρ value. Copyright © 2016 John Wiley & Sons, Ltd.     

Substituent effect study on 13Cβ SCS of styrene series. A Yukawa–Tsuno model and Reynolds dual substituent parameter model investigation

The Yukawa–Tsuno (Y–T) and Reynolds dual substituent parameter (DSP) models have been used to model ¹³C substituent chemical shift (SCS) of the C_β atom of 19 series of para‐substituted styrenes (X‐C₆H₄CR?CYW) with variable electronic and structural demands in the side‐chain. The best fit of the Y–T model was better than that of the Reynolds DSP model for most of the studied series. A high correlation was found between the ρ value of the Y–T model and ρ_F value of the Reynolds DSP model. The ρ value, which reflects the sensitivity of ¹³C_β SCS to the substituent field effect, was found to be influenced by the group W on the C_β atom. A W group that enhances the para‐substituent π‐polarization of the side‐chain has a higher ρ value than its counterpart W groups that induce counter π‐polarization in the side‐chain. The series with W in an E‐configuration to the aryl ring has higher ρ value than corresponding Z series. A lower ρ value is observed when W induces a counter π‐polarization of the side‐chain (as with NO₂ and COMe) or when the R substituent imposes a 65° dihedral angle between the side‐chain and the para‐substituted benzene ring (as with t‐Bu). When the W group is a heterocyclic ring, the closer the heteroatom is to C_β, the lower the ρ value is due to the greater counter π‐polarization. The two components of the substituent effect on ¹³C _β SCS, namely the field effect and resonance effect, behave inversely. The resonance demand (r⁺ value) increases, as the Y and/or W groups become more electron‐withdrawing (EW). The series with W as a hetrocyclic ring develop negative charge at the carbon atom of the hetrocyclic ring adjacent to C_β (and to which the styryl moiety is attached) and has a lower r⁺ value than those which fail to do so. The lowest r⁺ value was for those series with a 65° dihedral angle. Copyright © 2007 John Wiley & Sons, Ltd.