Fully room‐temperature‐fabricated TiN/TaOx/Pt nonvolatile memory devices

The reliable resistive switching properties of TiN/TaO_x/Pt structures fabricated with a fully room‐temperature process are demonstrated in this letter. The devices exhibited a low operation voltage of 0.6 V as well as good endurance up to 10⁵ cycles. No data loss was reported upon continuous readout for more than 10⁴ s at 125 °C. Multilevel storage is feasible due to the dependence of the low resistance state (LRS) on the initial “SET” (switch from high to low RS) compliance current. The values of LRS showed no dependence on the size of the device, which correlated with the localized conductive filament mechanism. This nonvolatile multilevel memory effect and the fully room‐temperature fabrication process make the TiN/TaO_x/Pt memory devices promising for future nonvolatile memory application. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation of resistive switching behaviours in WO3-based RRAM devices

In this paper, a WO₃-based resistive random access memory device composed of a thin film of WO₃ sandwiched between a copper top and a platinum bottom electrodes is fabricated by electron beam evaporation at room temperature. The reproducible resistive switching, low power consumption, multilevel storage possibility, and good data retention characteristics demonstrate that the Cu/WO₃/Pt memory device is very promising for future nonvolatile memory applications. The formation and rupture of localised conductive filaments is suggested to be responsible for the observed resistive switching behaviours.     

Resistive switching mechanism of Ag/ZrO2:Cu/Pt memory cell

Resistive switching mechanism of zirconium oxide-based resistive random access memory (RRAM) devices composed of Cu-doped ZrO₂ film sandwiched between an oxidizable electrode and an inert electrode was investigated. The Ag/ZrO₂:Cu/Pt RRAM devices with crosspoint structure fabricated by e-beam evaporation and e-beam lithography show reproducible bipolar resistive switching. The linear I?CV relationship of low resistance state (LRS) and the dependence of LRS resistance (R _ON) and reset current (I _reset) on the set current compliance (I _comp) indicate that the observed resistive switching characteristics of the Ag/ZrO₂:Cu/Pt device should be ascribed to the formation and annihilation of localized conductive filaments (CFs). The physical origin of CF was further analyzed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). CFs were directly observed by cross-sectional TEM. According to EDS and elemental mapping analysis, the main chemical composition of CF is determined by Ag atoms, coming from the Ag top electrode. On the basis of these experiments, we propose that the set and reset process of the device stem from the electrochemical reactions in the zirconium oxide under different external electrical stimuli.     

Highly improved resistive switching performances of the self-doped Pt/HfO2:Cu/Cu devices by atomic layer deposition

Metal-oxide electrochemical metallization (ECM) memory is a promising candidate for the next generation nonvolatile memory. But this memory suffers from large dispersion of resistive switching parameters due to the intrinsic randomness of the conductive filament. In this work, we have proposed a self-doping approach to improve the resistive switching characteristics. The fabricated Pt/HfO₂:Cu/Cu device shows outstanding nonvolatile memory properties, including high uniformity, good endurance, long retention and fast switching speed. The results demonstrate that the self-doping approach is an effective method to improve the metal-oxide ECM memory performances and the self-doped Pt/HfO₂:Cu/Cu device has high potentiality for the nonvolatile memory applications in the future.     

Analysis of resistive switching behaviors of vanadium oxide thin film

We demonstrated the polarization of resistive switching for Cu/VO_x/Cu memory cell. Switching behaviors of Cu/VO_x/Cu cell were tested by semiconductor device analyzer (Agilent B1500A), and the relative micro-analysis of I-V characteristics of VO_x/Cu was characterized by conductive atomic force microscope (CAFM). The I-V test results indicated that both forming and the reversible resistive switching between low resistance state (LRS) and high resistance state (HRS) can be observed under either positive or negative sweep. The CAFM images for LRS and HRS directly exhibited evidences of the formation and rupture of filaments based on positive or negative voltage. Cu/VO_x/Cu sandwiched structure exhibits a reversible resistive switching behavior and shows potential applications in the next generation nonvolatile memory field.     

Effect of AlN layer on the resistive switching properties of TiO2 based ReRAM memory devices

The present study reports the resistive switching behaviour in Titanium Dioxide (TiO₂) material, with possible implementations in non volatile memory device. The Cu/TiO₂/Pt memory device exhibit uniform and stable bipolar resistive switching behaviour. The current-voltage (I-V) analysis shows two discrete resistance states, the High Resistance State (HRS) and the Low Resistance State (LRS). The effect of an additional AlN layer in the resistive memory cell is also investigated. The Cu/TiO₂/AlN/Pt device shows a multilevel (tri-state) resistive switching. Multilevel switching is facilitated by ionic and metallic filament formation, and the nature of the formed filaments is confirmed by performing a resistance vs. temperature measurement. The bilayer device shows improved reliability over the single layer device. The formation of high thermal conductive interfacial oxy-nitride (AlON) layer is the main reasons for the enhancement of resistive switching properties in Cu/TiO₂/AlN/Pt cell. The performance of device was measured in terms of endurance and retention, which exhibits good endurance over 10⁵ cycles and long retention time of 10⁵ s at 125 °C. The above result suggests the feasibility of Cu/TiO₂/AlN/Pt devices for multilevel non volatile ReRAM application.     

Enhanced bipolar resistive switching of HfO2 with a Ti interlayer

The characteristics of resistive switching of TiN/HfO₂/Ti/HfO₂/Pt/Ti stacks on SiO₂/Si substrates were investigated and compared to TiN/HfO₂/Pt/Ti stacks in order to study Ti interlayer effects on resistive switching. The Ti interlayers were deposited in situ during the reactive sputtering of HfO₂ films. The current–voltage measurements showed that the Ti interlayers enhanced the memory window but reduced the endurance of SET/RESET operations. The energy filtered images by TEM showed asymmetric oxygen accumulation at the Ti/HfO _x interfaces. Subsequent heat treatment improved the endurance of SET/RESET operation of TiN/HfO₂/Ti/HfO₂/Pt/Ti stacks.     

Understanding the conduction and switching mechanism of Ti/AlOx/TaOx/Pt analog memristor

In this letter, the conduction and bipolar switching mechanism of the ultrathin AlO_x(3 nm)/TaO_x(5 nm) memristor are investigated through the electrical characterization and elemental analysis. The AlO_x/TaO_x memristor exhibits high uniformity and excellent analog property after initial reset process. The following experiments and analyses demonstrate that the switching behavior could take place over the whole area of TaO_x/Pt interface and is dominated by the tunneling barrier modulation induced by oxygen ions migration.     

Charge transport and bipolar switching mechanism in a Cu/HfO_2/Pt resistive switching cell

Bipolar resistance switching characteristics are investigated in Cu/sputtered-HfO_2/Pt structure in the application of resistive random access memory(RRAM).The conduction mechanism of the structure is characterized to be SCLC conduction.The dependence of resistances in both high resistance state(HRS) and low resistance state(LRS) on the temperature and device area are studied.Then,the composition and chemical bonding state of Cu and Hf at Cu/HfO_2 interface region are analyzed by x-ray photoelectron spectroscopy(XPS).Combining the electrical characteristics and the chemical structure at the interface,a model for the resistive switching effect in Cu/HfO_2/Pt stack is proposed.According to this model,the generation and recovery of oxygen vacancies in the HfO_2 film are responsible for the resistance change.     

Mechanism analysis of switching direction transformation in an Er2O3 based RRAM device

The resistive random access memory (RRAM) based on resistive switching effect has considered to be the most advanced next generation memory, in which the switching direction determines the order of reading-writing. In this work, the rare-earth metal Er₂O₃ was used as functional layer, and Ag and indium-tin-oxide (ITO) are selected as top and bottom electrode to fabricate resistive switching device. Further, it is observed that the switching direction and memory window of resistive switching device can be regulated by exchanging top and bottom electrode. Moreover, the complementary switching memory behavior in Ag/Er₂O₃/ITO/Er₂O₃/Ag structure was also observed. Through mechanism analysis, it is expected that the barrier changes and metal-ions oxidation-reduction should be responsible for the conversion of switching direction and regulation of memory window. This work opens up a way to the development of next generation new concept memory.     

Platinum–aluminum alloy electrode for retention improvement of gadolinium oxide resistive switching memory

Platinum–aluminum (Pt–Al) alloy top electrode on the retention improvement of gadolinium oxide (Gd _x O _y ) resistive switching memory was investigated. The aluminum oxide (Al _x O _y ) formation at the Pt–Al alloy top electrode and Gd _x O _y interface will lead to the high Schottky barrier height. Further, the more aluminum incorporation can suppress the crystallization of platinum electrode after the post-metallization annealing. Both the crystallization suppression of Pt top electrode and the interfacial aluminum oxide formation will prevent the oxygen ions from out-diffusion through Pt grain boundaries, responsible for the retention enhancement of the Gd _x O _y resistive switching memory.     

Solution-processed high-k thin films as a resistive switching for ReRAM applications

Resistive switching characteristics of solution-processed high-k thin films (HfO_x and TaO_x) were investigated for ReRAM applications. The thickness of solution-processed high-k thin films can be easily controlled by simple spin coating. We optimized the critical thickness of solution-processed HfO_x and TaO_x thin films, for reliable ReRAM operations. A similar bipolar resistive switching behavior was observed from both solution-processed and sputter-processed HfO_x films. Furthermore, it was found that the solution-processed HfO_x and TaO_x films have a uniform resistive switching characteristic. The dominant conduction of these solution-processed films is described by Ohmic conduction in the low-resistance state. On the other hand, Ohmic conduction at low voltage and Poole–Frenkel emission at high voltage dominate in the high-resistance state. It was verified that the solution-processed HfO_x and TaO_x films have superior endurance and retention characteristics. Therefore, ReRAM devices based on solution-processed high-k materials are expected to be a promising candidate, for usage of resistive memory in glass substrate or flexible substrate based electronic devices.     

Resistive switching behaviour of a tantalum oxide nanolayer fabricated by plasma oxidation

We investigate the resistive switching behaviour of a tantalum oxide nanolayer‐based nonvolatile memory with Pt/TaO_5–x/TaN structure, which was prepared at room temperature through a processing compatible with CMOS technology. The tantalum oxide nanolayer with thickness of about 5 nm was fabricated by plasma oxidation of TaN films. The switching mechanism can be explained by the modulation of the local oxygen‐deficient conduction channel resulting from oxygen ions drift. This Letter represents a cost‐efficient method for developing nanoscale restive switching nonvolatile memories. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low power resistive random access memory using interface-engineered dielectric stack of SiOx/a-Si/TiOy with 1D1R-like structure

In this study, we report a resistive random access memory (RRAM) using trilayer SiO_x/a-Si/TiO_y film structure. The low switching energy of <10 pJ, highly uniform current distribution (<13% variation), fast 50-ns speed and stable cycling endurance for 10⁶ cycles are simultaneously achieved in this RRAM device. Such good performance can be ascribed to the use of interface-engineered dielectric stack with 1D1R-like structure. The SiO_x tunnel barrier in contact with top Ni electrode to form diode-like rectifying element not only lowers self-compliance switching currents, but also improves cycling endurance, which is favorable for the application of high-density 3D memory.     

点接触金属/Pr$lt;sub$gt;0.7$lt;/sub$gt;Ca$lt;sub$gt;0.3$lt;/sub$gt;MnO$lt;sub$gt;3$lt;/sub$gt;/Pt结构稳定的低电流电阻开关特性

利用自主开发的导电原子力显微镜控制Pt,W探针构成点接触金属/Pr_0.7Ca_0.3MnO₃（PCMO）/Pt三明治结构,对其电流-电压（I-V）及脉冲诱导电阻开关（EPIR）特性进行了研究.研究发现,在10 nA限流下两种电极对应结构的I-V都表现出相当稳定的双极性电阻开关特性,以及大于100的电阻开关比.进一步测试发现,点接触W/PCMO/Pt器件具有在10 nA限流下稳定的EPIR特性以及100 pA限流下重复的双极性电阻开关特性.此电流比已报道的电流低3个数量级,表明此结构在低功耗存储器件方面的潜在应用.通过对比样品不同位置、不同限流、不同接触面积点接触Pt/PCMO/Pt的I-V回滞特性,把点接触器件在低电流下稳定、显著的电阻开关效应归结于小的器件面积导致强的局域电场加强了O离子迁移效应. 关键词： 脉冲诱导电阻开关 电场下氧离子迁移 电阻开关     

Ni/HfO_2/Pt阻变单元特性与机理的研究

研究了Ni/HfO2(10 nm)/Pt存储单元的阻变特性和机理.该器件具有forming-free的性质,还表现出与以往HfO2(3 nm)基器件不同的复杂的非极性阻变特性,并且具有较大的存储窗口值(105).存储单元的低阻态阻值不随单元面积改变,符合导电细丝阻变机理的特征.采用X射线光电子能谱仪分析器件处于低阻态时的阻变层HfO2薄膜的化学组分以及元素的化学态,结果表明,Ni/HfO2/Pt阻变存储器件处于低阻态时的导电细丝是由金属Ni导电细丝和氧空位导电细丝共同形成的.     

Dynamic moderation of an electric field using a SiO2 switching layer in TaOx ‐based ReRAM

ReRAMs using oxygen vacancy drift in their resistive switching are promising candidates as next generation memory devices. One remaining issue is degradation of the on/off ratio down to 10² or less with an increased number of switching cycles. Such degradation is caused by a local hard breakdown in a set process due to a very high electric field formed just before the completion of a conductive filament formation. We found that introducing an ultra‐thin SiO₂ layer prevents the hard breakdown by dynamical moderation of the electric field formed in the TaO_x matrix, resulting in repeated switching while retaining a higher on/off ratio of about 10⁵. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Resistive switching effect in metal–oxide–metal structures with ZnO:Li oxide layer

The resistive switching effect in metal–oxide–metal (MOM) structures has been investigated, where the 10% Li-doped ZnO layer was used as an oxide layer, as well as Pt and 20% fluorine doped SnO₂ (SnO₂:F) were used as a bottom electrodes. The current–voltage (I–V) and switching (I–t) characteristics of Ag/ZnO:Li/Pt and Ag/ZnO:Li/SnO₂:F structures were investigated. The unipolar resistive switching is detected in the structures with the Pt, while the use of transparent conductive SnO₂:F electrode instead of Pt, results to the bipolar memory effect.     

Metal-substitution strategy to control the conductive path in titanium dioxide: ab initio calculations

Revealing the atomic-nature of the conductive path in TiO₂ layer based resistive-switching devices still remains a critical challenge. Metal atoms doping in TiO₂ layer are always considered as an effective way to improve the electronic properties in resistive random access memory. Efforts to clarify the effects of metal atom substitution on the conductive path in rutile TiO₂ have been done by using first-principles calculation. The dependence of the conductive path on the substitution of Ag/Cu/Al/Hf/Ta/V adjacent to the ordering oxygen vacancies or away from them has been studied in detail to elucidate the formation mechanism of conductive path. Theoretical investigation demonstrates that Hf or V substitution where it occurs adjacent to the oxygen vacancies benefits electrons aggregation among Ti-ions. Such electrons aggregation, which is one type of the conductive path in TiO₂, will be prompted by Ti-t2g orbital electron. The dependent relation of the conductive path on the substitution of Ag/Cu/Al/Hf/Ta/V will be an important factor to optimize future resistive random access memory.     

Composition dependence of unipolar resistance switching in TaOx thin films

Amorphous TaO_x thin films were deposited at different temperatures, and the resistance switching properties of the Pt/TaO_x/Pt structure were investigated. X‐ray photoelectron spectroscopy showed that the amount of Ta₂O₅ in the film decreased and the content of Ta suboxides increased substantially when the growth temperature was increased. Unipolar resistance switching near the anode was stable only for TaO_x film grown at room temperature. The experimental results revealed the critical effect of the film composition on the resistance switching behavior of TaO_x films. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)