半导体超常媒质矩形谐振腔(英文)

设计并研究了两个有不同各向异性参数的半导体超常媒质矩形谐振腔,其中填充了部分右手半导体超常媒质和部分左手半导体超常媒质。通过作图法研究了充满非色散的右手半导体超常媒质和色散的左手半导体超常媒质的谐振腔中谐振模式的解。结果显示,谐振腔的谐振模式取决于半导体超常媒质的色散关系。讨论了每种谐振腔中包含的六种情况,分别表示两个区域的传播常数为实数和虚数的不同的组合,并且揭示了构建具有无相差特性的谐振腔的几何参数要求。     

Subwavelength rectangular cavity partially filled with left-handed materials

In this paper, we present the electromagnetic analysis of a rectangular cavity partially filled with a left-handed material slab. Our theoretical investigation shows that there exist novel resonant modes in the cavity, and such a cavity becomes a subwavelength cavity. The eigenvalue equation of the cavity is derived and the resonant frequencies of the novel modes are calculated by using numerical simulation. We also discuss the stability of the novel resonant modes and show the best condition under which a useful rectangular cavity of subwavelength dimensions with tolerable stability is obtained.     

An ultra-small cavity resonator loaded with LHM and RHM layers

In this paper, an ultra-small cavity resonator (USCR) loaded with left-handed metamaterial (LHM) and right-handed material (RHM) layers is designed using a novel miniaturization approach. The resonant behavior is successfully observed, and the dimensions of the USCR are only 4.58 mm × 5.08 mm × 2.29 mm at the dominant resonance frequency of 10.3 GHz. Through the field distribution calculation, we confirmed that the miniaturization of the USCR arises from the left-handed property of the LHM. For a practical application, a miniaturized filter with overall length of 10.19 mm consisting of two USCRs is designed to confirm the frequency-selective characteristics. Results show that the filter has some narrow pass bands, which correspond to the resonant modes of the electromagnetic resonance in the USCR, and the insertion loss at the dominant resonance frequency of the USCR is as low as 0.65 dB. Moreover, the filtering characteristics of the filter can be controlled by changing its feeding loop positions in the USCR. PACS 78.70.Gq; 81.05.Zx; 84.40.Ba     

An anisotropic metamaterial-based rectangular resonant cavity

Resonance properties of a rectangular resonant cavity filled with an anisotropic metamaterial bilayer are investigated. Different from the isotropic case and the one-dimensional resonator, the resonance properties in such a cavity are closely related to the dispersion relation of the anisotropic medium. Three cases including six subcases of different combinations of metamaterials are discussed and it is found that subwavelength resonance modes may occur in all subcases. Particularly, the relation between resonance modes and the transverse cavity width is investigated, and calculated results show that there are infinite subwavelength resonance modes as the transverse cavity width approaches zero. Requirements of the material and geometry parameters to construct a subwavelength resonant cavity are revealed by theoretical analysis, which demonstrates that this kind of subwavelength resonator brings more design flexibility and tolerance. PACS 78.70.Gq; 81.05.Zx; 84.40.Ba     

面向谐振式微光学陀螺应用的球形谐振腔DQ乘积优化

基于谐振式光学陀螺高灵敏度、低成本与微型化的发展需求, 为了实现高灵敏度的谐振式微光机电陀螺, 提出了以集成光学微谐振腔领域里高Q值、大直径谐振腔的制作为目标, 应用方向为谐振式光学陀螺的球形光学微谐振腔核心敏感单元. 在实验中以氢火焰作为热源采用熔融法制备球形光学微谐振腔. 通过调节氢气的流量控制氢火焰热源面积, 制备了不同直径(300-2200 μm)的球形谐振腔, 分析了球形谐振腔Q 值、DQ乘积、陀螺灵敏度与谐振腔直径D的对应关系及其原因, 获得了最优参数的面向谐振式光学陀螺的球形谐振腔敏感单元. D=1260 μm时, 球腔品质因数 Q=7.18×10⁷, 得到的最优陀螺灵敏度约为10°/h, 满足商业级应用的需求, 为芯片级、高精度、低成本的新型谐振式光学微腔陀螺的研究奠定了实验基础.     

外腔谐振技术及其应用

本文叙述了连续单模染料激光在外腔谐振中增强的原理,外腔的构成,介绍了外谐振腔在无多普勒光谱测量中的应用,特别在单模连续染料激光倍频中,应用这种外谐振腔使倍频转换效率提高百余倍。     

A compact in-plane photonic crystal channel drop filter

This paper presents a novel in-plane photonic crystal channel drop filter.The device is composed of a resonant cavity sandwiched by two parallel waveguides.The cavity has two resonant modes with opposite symmetries.Tuning these two modes into degeneracy causes destructive interference in bus waveguide,which results in high forward drop efficiency at the resonant wavelength.From the result of numerical analysis by using two-dimensional finite-difference time-domain method,the channel drop filter has a drop efficiency of 96% and a Q value of over 3000,which can be used in dense wavelength division multiplexing systems.     

利用三原子W类纠缠态在腔量子电动力学体系中实现单原子态的远程制备

提出了两个利用三原子W类纠缠态作为量子通道.在腔量子电动力学(QED)体系中实现单原子态的远程制备方案:一个是接收者借助于原子与单模腔场之间的大失谐相互作用实现初始态重建,另一个则是接受者利用原子与单模腔场之间的共振相互作用完成远程态制备.两方案中都涉及到了一位发送者和两位接收者,发送者可以将被传送态远程制备到两位接收者中的任何一位的手中,而另一位接受者必须为其提供必要的协助.表明利用原子与腔场之间的大失谐相互作用的方法可以很好地克服腔场的消相干,降低对腔品质因子的要求;而利用共振相互作用的方法则无需引入辅助原子,操作简便.但不论采用何种方法,实现单原子远程态制备的总成功概率是相同的.     

基于双负介质与负介电常数介质交叠结构的谐振腔研究

通过探讨双负介质与负介电常数介质交叠结构的谐振特性,实现了一种能够同时缩小长度和宽度的改进的小型化谐振腔(IMCR). 对IMCR谐振特性进行了数值仿真,结果表明,IMCR能够在10.3GHz上稳定谐振,但其长度和宽度却分别只有4.58和5.08mm,相比于普通金属谐振腔的长度和宽度均缩短了一半. 这些结果对基于双负介质的小型化谐振腔的发展具有理论意义. 关键词： 双负介质 负介电常数介质 改进的小型化谐振腔 各向异性     

锥形光纤激发盘腔光学模式互易性研究

光学谐振腔由于其高Q值特性,作为谐振式陀螺的核心元件,有望实现谐振式陀螺的小型化、集成化,但是非互易性噪声成为制约其精度提高的不利因素. 介绍了采用传统半导体工艺制备的盘型腔与熔融法拉制的锥形光纤组成的耦合系统. 当盘型腔在光纤锥区的不同位置进行耦合谐振时,将输入输出正/反对调,观察到输出透射谱发生偏差,谐振频率、耦合效率以及Q值均发生变化,即存在非互易性现象. 用Rsoft软件对锥形光纤倏逝场分布特性进行仿真,理论分析了非互易性产生的原因. 以此可抑制谐振式光学陀螺应用中由锥形光纤与谐振腔组成的耦合系统产生的非互易性噪声. 关键词： 光学谐振腔 锥形光纤 非互易性 谐振式陀螺     

Generation of entangled coherent states for two cavity modes via resonant interaction with a V-type three-level atom

This paper proposes a scheme for the generation of entangled coherent states for two cavity modes. In the scheme a V-type three-level atom is sent through a two-mode cavity filled with a coherent field. After the atom cavity interaction and detection of the atomic state the cavity modes may evolve to a superposition of two-mode coherent states. As the scheme is based on resonant atom-cavity interaction, the required interaction time is short, which is important in view of the decoherence. Moreover, additional classical pulses are unnecessary before and after the atom-cavlty interaction.     

Compact cavity resonators using high impedance surfaces

This paper presents a miniaturization concept for cavity resonators. The idea is to create a λ/4 long cavity resonator by using a combination of Perfect Electric Conductor (PEC) and Perfect Magnetic Conductor (PMC) boundary conditions. Reducing by half the length and width of a metallic cavity resonator and placing PMC boundary conditions on two adjacent side walls allows the resonance of a λ/4 mode inside the hybrid cavity resonator, at the same frequency as the λ/2 long metallic one. The practical implementation of the PMC boundary condition is realized by using High Impedance Surfaces (HIS). The design of the surfaces is realized at the element level and is implemented on standard microwave substrate. Measurements demonstrate a cavity resonator operating at 4 GHz with half the length and width of a metallic cavity resonator, meanwhile its volume is divided by four.     

Surface waves guided by magnetic metamaterials

We consider electromagnetic waves guided by slabs of anisotropic resonant magnetic metamaterials in free space and in metal waveguides. It is shown that wave propagation is possible in a waveguide below cutoff with an insert of such a metamaterial. The dependence of the dispersion properties of waves on the geometric sizes of the insert and the waveguide are studied. The obtained results can be used for miniaturization of electrodynamic systems. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 49, No. 7, pp. 618–625, July 2006.     

基于宽度可调节的线缺陷平板型光子晶体的空气槽微腔

研究了一种空气槽光子晶体微腔,这种腔是由在平板型光子晶体上引入一条宽度可以调节的线缺陷空气槽形成的.腔模的电场被强烈局限在空气槽中,由于介电常量的不连续性,电场得到很大的提高,同时模体积被大大地降低.数值模拟与分析了微腔的能带结构和场分布,考虑到腔模的谐振频率和对称性,发现一阶偶膜同时具有较高的品质因子和较小的模体积;应用有限时域差分法,得到腔模的品质因子可以高达10⁶,模体积仅为0.02(λ/n)³.计算了一阶偶模谐振波长随空气槽宽度以及空气孔半径的变化,发现随着宽度的增加,波长越来越短.而随着空气孔半径的增加,波长近似线性地减小;当空气孔半径为170 nm时,可以获得最高的腔品质因子.     

电子注对谐振腔中TM模式谐振频率和电磁场分布的影响

将电子注视为等离子体柱,从填充等离子体柱的谐振腔的物理模型出发,推导了圆柱腔填充中心电子注时TM0m0模式的特征方程,并重点分析了填充电子注的圆柱腔中TM010模式和TM020模式的谐振频率和电磁场分布随等离子频率的变化情况。研究结果表明,随着电子注的等离子体频率不断增大,谐振频率也不断增大,谐振腔内电场和磁场的分布也随之发生改变。当电子注的等离子体频率超过谐振腔的谐振频率时,谐振腔内的电磁场分布将发生很大的变化,出现了电子注内外电场方向相反和趋肤效应等现象。     

极性晶体界面附近激子的性质

本文利用么正变换方法计算了极性晶体界面附近激子的基态能量,得到了激子基态能量及倒半径随激子质心距界面距离变化的曲线。发现当晶体在真空中时,表面会出现死层,晶体与金属相接触时,界面附近会出现相变。     

基于平面光波导谐振腔的可调谐光电振荡器

提出了一种基于平面光波导谐振腔的可调谐光电振荡器.该振荡器中,相位调制器串联光波导谐振腔,取代了传统系统中的强度调制器、长光纤和滤波器.由于光学谐振腔对光子频率和相位敏感,调节激光器改变输出光的波长,不仅可以调制光的强度,还可以对微波光子进行选频输出.当光子在波导腔中发生谐振时,产生很强的延时特性,可以取代传统系统中的长光纤.整个光电振荡器系统体积为长29.5cm、宽21cm、高7cm.实验中,改变0.1pm的光子波长,能够产生步长为12.535.5 MHz的调谐,调谐范围达2 GHz,且系统能够产生10 GHz的微波信号,在中心频率为10 GHz处其相位噪声为-109.7dBc/Hz@10kHz.该研究为光电振荡器的小型化和实用化提供了一种新的思路.     

充氦气对多波切伦柯夫振荡器工作特性的影响

采用PIC模拟方法,研究了具有谐振腔的多波切伦柯夫振荡器在充入不同密度的氦气下工作的物理过程,分析了等离子体产生物理机制及其对微波输出影响。结果表明,等离子体的产生是由于电子束对氦原子的碰撞电离及其雪崩效应引起的。由于电离产生的正离子有利于束的传输和群聚,当在一定范围内增加氦气密度时,可减小微波起振时间,提高束波能量转换效率,但并不改变微波频率;进一步增大气体密度,微波起振时间增大、效率下降,甚至出现脉冲缩短现象。     

Directive metamaterial-based subwavelength resonant cavity antennas – Applications for beam steering

This article presents the use of composite resonant metamaterials for the design of highly directive subwavelength cavity antennas. These metamaterials, composed of planar metallic patterns periodically organized on dielectric substrates, exhibit frequency dispersive phase characteristics. Different models of metamaterial-based surfaces (metasurfaces), introducing a zero degree reflection phase shift to incident waves, are firstly studied where the bandwidth and operation frequency are predicted. These surfaces are then applied in a resonant Fabry–Perot type cavity and a ray optics analysis is used to design different models of ultra-compact high-gain microstrip printed antennas. Another surface presenting a variable reflection phase by the use of a non-periodic metamaterial-based metallic strips array is designed for a passive low-profile steering beam antenna application. Finally, the incorporation of active electronic components on the metasurfaces, allowing an electronic control of the phase responses, is applied to an operation frequency reconfigurable cavity and a beam steering cavity. All these cavity antennas operate on subwavelength modes, the smallest cavity thickness being of the order of λ/60. To cite this article: A. Ourir et al., C. R. Physique 10 (2009).     

Probabilistic Teleportation of an Arbitrary Two-mode <Emphasis Type="Italic">N</Emphasis>-photon Entangled State in Cavity QED

We propose a scheme for teleportation of an arbitrary two-mode N-photon entangled states in cavity QED. The scheme is based on the resonant interaction between Λ-type atoms and two-mode cavity fields. In contrast to all the theoretical schemes proposed previously in cavity QED for teleportation of two-mode cavity field states, in the present scheme, the established entanglement for the quantum channel is the type of the multi-dimensional entanglement between the symmetric multi-atom Dicke states and two-mode N-photon states. Therefore, the scheme extends the scope of the theoretical study of the teleportation.