哌啶分子在两种不同银电极上吸附行为的实验和理论研究

分别在粗糙银电极和银纳米颗粒修饰银电极上得到了哌啶分子的表面增强拉曼（SERS）光谱。哌啶在银电极与银纳米颗粒修饰的银电极上的SERS谱有很大的区别,分析认为是由于哌啶在不同基底上的吸附方式不同所引起的,据此建立了哌啶吸附在银颗粒表面的两种模型,用DFT-B3PW91-lanl2dz方法计算了两种模型的拉曼频移,通过与实验结果比较说明了哌啶分子主要通过N原子的孤对电子竖直吸附在粗糙银电极表面,而在银纳米颗粒修饰的银电极上则以平行吸附方式为主。     

纳米银组装结构上罗丹明B的表面增强荧光效应

采用表面自组装技术,在玻璃表面构筑银纳米粒子的二维组装结构。银纳米粒子组装结构的表面等离子共振光谱中偶极子表面等离子体共振对组装结构更为敏感而表现出较大位移。组装银纳米粒子可极大增强罗丹明B的荧光。荧光的表面增强效应主要来自银纳米粒子对荧光分子所处区域的局部电磁场增强,银纳米粒子的表面分子修饰对其表面增强效应有较大的影响。     

二维自组装结构中银纳米粒子的吸收光谱特征

通过静电相互作用在聚乙烯吡啶修饰的玻璃表面组装了银纳米粒子的二维结构。吸收光谱结果表明,组装银粒子间的相互作用导致银粒子的偶极子表面等离子体共振发生较大的位移,但基本不改变四极子表面等离子体共振。银粒子表面吸附分子及周围介质直接影响其表面等离子体共振。     

Piperidine adsorption on two different silver electrodes: A combined surface enhanced Raman spectroscopy and density functional theory study

The surface enhanced Raman scattering (SERS) spectra of piperidine in silver colloid solution, on roughened silver electrode and on roughened silver electrode modified with silver nanoparticles were studied, and the high-quality SERS spectra of piperidine on roughened silver electrode modified with silver nanoparticles were obtained for the first time. Surface selection rules derived from the EM enhancement model were employed to deduce piperidine orientations on the different surfaces. On the basis of this, two models of piperidine adsorbed on the surface of the silver nanoparticles were built, and DFT-B3PW91/LanL2dz was applied to calculate the Raman frequencies. It proves that, at higher potential values, the piperidine is perpendicularly standing on the roughened silver electrode surface though its lone-electron pair, but in silver colloid solution and on the silver nanoparticles modified silver electrode the piperidine molecular lies flat on the silver surface. In the meantime, the potential dependent SERS of piperidine on the modified electrode were studied.     

纳米银组装结构的表面增强荧光效应

采用表面自组装技术,在玻片表面构筑银纳米粒子二维组装结构.银纳米粒子组装结构的吸收光谱表明银粒子表面等离子体共振与粒子间电磁偶合密切相关,偶极子表面等离子体共振更为敏感而发生较大位移.在银纳米粒子组装结构上,荧光素分子的荧光得到极大增强,其表面增强效应强烈依赖于组装金属粒子的表面等离子体共振.     

银溶胶的合成、表征及其表面增强拉曼散射特性研究

报道了一种简单的合成均匀、稳定的银溶胶的方法,通过透射电子显微镜(TEM)观察其形貌,并利用UV-Vis谱、XPS等手段对其进行表征,以罗丹明6G(R6G)作为探针分子研究在银溶胶纳米粒子上的表面增强拉曼效果,结果表明所合成的银溶胶具有较强的表面增强拉曼散射效果。     

银纳米粒子对组装阵列中耦联分子拉曼散射的影响

分别用硼氢化钠和氢气还原法制备了两种不同的银溶胶(I和II),并采用自组装技术将银纳米粒子组装到对巯基苯胺(PATP)修饰的光滑银基底表面,形成银纳米粒子亚单层二维阵列。比较两种阵列中PATP的表面增强拉曼光谱发现,溶胶II所得阵列中的PATP的b2振动得到了较大的增强,即存在较大程度的电荷转移,说明银纳米粒子的性质直接影响了耦联分子的光谱特征。对溶胶Ⅰ进行离心处理,组装,得到的拉曼特征与阵列II类似。就溶胶II的银纳米粒子而言,组装结构中可能形成Ag-N化学键,从而导致更强的氨基与银粒子的相互作用。     

微乳液法制备纳米银粒子的结构及其荧光现象研究

采用微乳液法合成了不同粒径的纳米银粒子,考察了环己烷和甲苯作为油相对制备纳米银的影响.对纳米银粒子的尺寸与结构进行了表征,观察到近球形多晶粒子,并有孪晶结构存在,对晶体结构的分析表明银粒子存在不同程度的点阵畸变,晶面间距增大.不同粒径的纳米银粒子氯仿体系可呈现荧光光谱,而纳米银甲苯体系则无荧光发射.结合紫外—可见吸收光谱和电子自旋共振谱对该体系的荧光发射机理进行了分析 关键词： 微乳液 纳米银粒子 纳米晶结构 荧光     

纳米增强激光诱导击穿光谱的苹果表面农药残留检测

水果表面的农药残留严重危害身体健康,而常规检测方法需要采样处理,耗时、费力。激光诱导击穿光谱技术具有多元素分析和原位测量的能力,在水果表面农药残留检测方面潜力巨大。但是较差的检测灵敏度,限制了此技术在水果表面微量有害元素检测方面的应用。提高激光诱导击穿光谱系统的检测能力是目前的研究热点领域,研究了纳米粒子表面增强技术对苹果表面残留的毒死蜱农药的激光诱导击穿光谱信号的增强效果。通过在被测样品表面涂抹币族金属纳米粒子,然后利用激光诱导击穿光谱激发样品表面,对诱导出的原子发射光谱信号进行测量,实验结果表明,苹果表面涂抹金属纳米粒子后毒死蜱农药中磷元素的特征峰有4倍的增强。此方法的应用对提高果蔬表面微量有害元素的检测能力具有重要意义。然后我们对币族金属纳米粒子的增强效果进行了优化。研究了金纳米粒子和银纳米粒子的增强能力,同时对纳米粒子的粒径的增强效果进行了比较,通过对20 nm的金纳米粒子、20 nm的银纳米粒子和80 nm的银纳米粒子的增强效果比较,发现80 nm的银纳米粒子对苹果表面毒死蜱农药光谱的增强效果最好。研究了信号采集延时时间对光谱信噪比的影响,确定了0.2 μs的延时时间可以获得较为理想的信噪比。在以上研究的基础上,采用最优的实验参数(80 nm银粒子增强、0.2 μs的延时时间),以毒死蜱中磷元素在213.62,214.91,253.56和255.33 nm处的特征峰峰强作为依据,对苹果表面残留的毒死蜱农药进行了定量化分析。分别采集了毒死蜱残留浓度分别为30,20,15,12,10和6 μg·cm-2的苹果表面的LIBS光谱,然后分别利用磷元素的四个特征峰峰强进行了定量化曲线拟合,结果发现LIBS对残留的毒死蜱具有很好的定量化预测能力,R2在0.89以上。根据定量化拟合曲线,探讨了纳米增强LIBS的检测限,计算得到,利用纳米增强LIBS技术测量苹果表面的毒死蜱农药最低可以做到1.61 μg·cm-2的检测限。研究证明了金属纳米粒显著提高了LIBS对苹果表面农药残留的检测灵敏度。     

Spectral manifestation of surface plasmon resonance of silver nanoparticles upon interaction with water-soluble metalloporphyrins

Absorption and resonant light-scattering spectra of nanoparticles (NPs) of silver, and their complexes with water-soluble Cu(II)-5,10,15,20-tetrakis(4-N-methylpyridinium)-porphyrin (CuTMpyP4) and Fe(II)-5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin (FeTSPP) have been compared. It is shown that in the presence of cationic CuTMpyP4, the band of surface plasmon resonance in the absorption and resonant scattering spectra of silver NPs is shifted to the long-wavelength region that is associated with the agglomeration of the particles caused by the Coulomb attraction between the silver particles and the porphyrin molecules. Addition of anionic FeTSPP to the silver NP solution does not lead to any spectral changes. The observed effect of silver-NP association induced by the cationic porphyrin can be used to develop an optical method for the detection of nanoparticles in solutions.     

Surface Plasmon Resonance and Aggregate Stability of Silver Nanoparticle Complexes with Chemotripsin

Extinction spectra, effective sizes, and aggregate stability of silver nanoparticles and nanocomplexes of silver nanoparticles with chymotrypsin obtained by the reactions of chemical reduction of silver nitrate using sodium borohydride as a reducing agent are studied. It is shown that silver nanoparticles obtained in the absence of chymotrypsin are aggregatively stable only at pH values immediately after synthesis. The placement of the synthesized silver nanoparticles in buffer solutions with pH values from 3.0 to 12.0 resulted in the appearance of a wide absorption band in the visible region of the spectrum, which is due to the agglomeration of silver nanoparticles, which appears to be the result of the destruction of the double electric layer formed by the ions making up sodium borohydride. The presence of chymotrypsin in the reaction medium resulted in significant spectral changes. Unlike silver nanoparticles synthesized in the absence of chymotrypsin, for nanocomplexes of silver nanoparticles with chymotrypsin with a change in pH, the shape of the extinction spectra and the position of the surface plasmon resonance band were preserved, while nanocomplexes of silver nanoparticles with chymotrypsin retained the aggregative stability in solutions in the pH range from 3.0 to 12.0 within a month. The observed stabilization effect of silver nanoparticles over a wide pH range induced by the presence of chymotrypsin in the reaction medium can be used further to develop methods for immobilizing enzymes on nanoparticles of biogenic elements and for creating polyfunctional pharmaceuticals, in which the components of nanocomplexes have different biological activity.     

Magnetic lipid nanoparticles loading doxorubicin for intracellular delivery: Preparation and characteristics

Tumor intracellular delivery is an effective route for targeting chemotherapy to enhance the curative effect and minimize the side effect of a drug. In this study, the magnetic lipid nanoparticles with an uptake ability by tumor cells were prepared dispersing ferroso-ferric oxide nanoparticles in aqueous phase using oleic acid (OA) as a dispersant, and following the solvent dispersion of lipid organic solution. The obtained nanoparticles with 200 nm volume average diameter and −30 mV surface zeta potential could be completely removed by external magnetic field from aqueous solution. Using doxorubicin (DOX) as a model drug, the drug-loaded magnetic lipid nanoparticles were investigated in detail, such as the effects of OA, drug and lipid content on volume average diameter, zeta potential, drug encapsulation efficiency, drug loading, and in vitro drug release. The drug loading capacity and encapsulation efficiency were enhanced with increasing drug or lipid content, reduced with increasing OA content. The in vitro drug release could be controlled by changing drug or lipid content. Cellular uptake by MCF-7 cells experiment presented the excellent internalization ability of the prepared magnetic lipid nanoparticles. These results evidenced that the present magnetic lipid nanoparticles have potential for targeting therapy of antitumor drugs.     

自组装银纳米粒子及其SERS增强效应

采用柠檬酸三钠还原硝酸银方法制备出银纳米粒子, 并通过在玻璃表面修饰3-氨基丙基-三乙氧基硅烷( APTES)对银纳米粒子进行自组装。利用紫外-可见(UV-Vis)吸收光谱和扫描电子显微镜(SEM)测试手段对样品进行分析和表征。由测试结果可知银纳米粒子的尺寸比较均匀, 组装致密度较高, 基本以亚单层的形式分布于基底表面。进一步研究了以结晶紫(CV)为探针分子的自组装基底的表面增强拉曼光谱(SERS), 计算发现该基底的拉曼增强因子数量级达106。结果表明: 银纳米粒子自组装基底具有良好的SERS增强效应, 为痕量CV的检测提供了有效的方法。     

Surface‐enhanced Raman scattering and density functional theory studies of bis(4‐aminophenyl)sulfone

Raman and surface‐enhanced Raman scattering (SERS) spectra of dapsone by using colloidal silver nanoparticles have been recorded. Density functional theory was used for the optimization of ground state geometries and simulation of the vibrational spectrum of this molecule. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman as well as the SERS normal modes and the corresponding assignments, along with the modeling of the free dapsone and the one in the presence of the colloidal silver nanoparticles, the importance of the sulfone group on the SERS effect in dapsone was inferred. Copyright © 2009 John Wiley & Sons, Ltd.     

银纳米粒子的SERS效应和SEF效应在微流控芯片光学检测中的应用

银纳米离子的SERS技术和SEF技术的信号检测灵敏度非常高,可以用在微流控芯片的定量分析中。为了提高微流控芯片光学检测技术的检测精度,提出一种在微通道中添加银纳米粒子来增强SYBR GreenⅠ拉曼和荧光信号的方法,并对该方法的原理和增强效果进行了研究。首先,利用准分子激光器在PMMA基板上直写刻蚀出宽200 μm、深68 μm的微通道,接着将制备的银前体溶液加入微通道,通过加热制备出表面增强拉曼（SERS）和表面增强荧光（SEF）基板,接下来对添加银纳米粒子前后的拉曼和荧光信号分别进行对比,进一步研究了微通道中不同浓度银纳米粒子对SYBR GREEN I的拉曼和荧光信号增强效果。添加银纳米粒子后,表面增强拉曼（SERS）实验的增强因子为3.5×10³,添加银纳米粒子的样品的荧光信号强度与不含银纳米粒子样品的荧光信号强度相比,约增加了1倍。结果表明,在微通道中检测SYBR Green I时通过增加银纳米粒子显著地增强了拉曼和荧光信号,这种方法可以用在以SYBR GreenⅠ做染料的微流控芯片检测技术中。     

巯基苯甲酸在电化学沉积的金/银薄膜表面的吸附行为

通过表面增强拉曼散射(SERS)技术和密度泛函理论(DFT)研究对巯基苯甲酸自组装在电化学沉积的金和银薄膜表面的吸附行为.结果表明电化学沉积的金和银薄膜是良好的SERS活性基底. 通过对巯基苯甲酸的SERS光谱分析和DFT理论计算,以及表面选择定则,得到了对巯基苯甲酸主要通过羧基自组装在电化学沉积银膜表面,并且苯环表面可能和银表面有一倾角,对巯基苯甲酸主要通过硫原子和金表面相互作用,并且苯环平面可能和金膜表面有一个倾角     

纳米结构表面形貌成型机理及其对石墨烯拉曼光谱的影响

通过真空热蒸镀和高温退火法制备的金属纳米复结构SERS基底因其具有良好的灵敏度,稳定性和均匀性而广泛应用于各种检测领域。石墨烯具有优良的光学特性,化学惰性以及荧光猝灭效应,自被发现以后一直是光学微纳器件中的一大热门材料。石墨烯还可以有效分离探针分子与基底,优化拉曼光谱质量,因此广泛应用于SERS研究领域。同时石墨烯可以有效隔绝金属纳米结构与空气的直接接触防止金属纳米结构被氧化而失效,也可以催化氧化银的脱氧反应提升SERS基底的稳定性。在石墨烯/金属纳米复合结构SERS基底在制备过程中,受到金属膜的种类、厚度参数、气体种类、退火时间、温度和气压等因素的影响,制备的金属纳米结构形貌存在很大差异。石墨烯的拉曼光谱会因为应力和掺杂导致其拉曼特征峰出现不同程度的增强,移动以及展宽。（1）采用真空热蒸镀法和高温退火法制备石墨烯/银纳米复合结构SERS基底,建立了金属纳米颗粒成型机理的模型,从孔洞形成、孔洞生长、金属纳米岛形成三个阶段分析了金属纳米粒子的成型过程,实验沉积5,10,15以及20 nm的银薄膜,退火后银纳米结构的覆盖率分别为~35.1%,~24.4%,~30%以及~96.0%,在沉积银薄膜样品上使用湿法转移石墨烯,退火处理后发现石墨烯阻止了银纳米岛的形成过程;（2）理论分析了银薄膜厚度、石墨烯覆盖对复合结构的几何形貌、拉曼增强特性的影响,石墨烯由于其具有较高的杨氏模量和表面张力,可以有效抑制退火过程中银薄膜向纳米粒子转变的过程,从而实现对复合结构表面形貌的调控;（3）实验研究了银纳米粒结构形貌对石墨烯拉曼光谱的影响,并理论分析了蒸镀不同银薄膜厚度的样品对石墨烯的拉曼光谱增强,移动以及展宽影响的具体原因。     

憎水性金属纳米粒子及其LB膜的制备与光谱表征

用油酸钠和十四烷基硫醇作为稳定剂,制备了高度单分散的疏水性银和金纳米溶胶。考察了单粒子层的π－Ａ曲线并建造了纳米粒子的ＬＢ膜。通过紫外可见光谱讨论了纳米粒子的分散状态,由红外光谱结果讨论了纳米粒子表面有机吸附层的状态。     

表面分子功能化银纳米粒子的光谱特征

通过玻片表面构筑银纳米粒子二维组装结构研究吸附分子对银粒子表面等离子体共振的影响.吸收光谱结果表明银纳米粒子表面吸附二硫代乙二酰胺分子可导致金属粒子的表面等离子体共振吸收红移,主要与金属粒子的微环境改变以及吸附分子与金属间电荷转移而导致的金属粒子内部电子密度改变有关.二硫代乙二酰胺分子通过其氨基和巯基共同吸附于金属表面.     

用于蓝光(405nm)激光直写的聚乙烯醇/银纳米复合材料薄膜的制备

利用紫外光诱导还原金属前躯体硝酸银(AgNO3),直接在聚乙烯醇(PVA)薄膜中生长银纳米颗粒,成功制备出PVA/Ag纳米复合材料薄膜。利用紫外-可见吸收光谱分析了银离子浓度、紫外光辐照功率和辐照时间对薄膜光谱的影响趋势。通过优化硝酸银浓度、辐照条件来调节薄膜中银纳米颗粒的尺寸和空间分布密度,成功地将此复合薄膜的等离子共振吸收峰位调节为406nm,并用于蓝光(405nm)激光直写光刻。扫描电子显微镜(SEM)观察表明,该材料中纳米颗粒分布均匀,粒径分布较窄;X射线光电子谱(XPS)证实了合成的纳米颗粒为单质银;原子力显微镜(AFM)分析显示薄膜光刻后获得了表面清晰、光滑、规整的图形。