一种用于塑料光纤接入网的多优先级控制协议设计

提出一种基于光码分多址(OCDMA)技术的塑料光纤接入网的多优先级控制协议.由于受传输误码率的限制,常规的光码分多址系统只允许有限个用户传输数据或接入网络,为了解决用有限的码字来实现多于码字数目的多媒体工作站间的信息通信,这种多优先级的控制协议通过使用预约和随机分配算法可以有效地解决信道冲突和目的地址的冲突问题, 该协议可以支持多媒体信息传输中各类信息不同的时间延迟要求.另外,在该接入网中,每个光网络单元均设有两套光编码器和光解码器,一套用于控制信道,另一套用于各个数据信道.利用本文提出的协议对塑料光纤接入网的网络吞吐量和平均延时时间进行了数值分析和仿真实验,结果证明了这种多优先级控制协议的有效性和高效性.     

基于光码分多址技术的塑料光纤接入网探讨

本文通过对多信道光接入网复用和多址接入方式的分析,提出一种基于光码分多址(OCDMA)技术的塑料光纤接入网结构,同时给出了适合于多媒体信息业务传输的控制协议以及低成本的硬件实现方案,为实现光接入网的最终目标即光纤到办公室(FTTO)或光纤到家庭(FTTH)提供了一条有效的途径.     

用于塑料光纤接入网的三优先级控制协议设计

为了解决用有限的码字来实现多于码字数目的多媒体工作站间的信息通信,提出一种基于光码分多址(Optical Code Division Multiple Access,OCDMA)技术的塑料光纤接入网的多优先级控制协议. 该协议通过使用预约方案和仲裁算法可以有效地解决信道冲突和目的地址的冲突问题,可以支持多媒体信息传输中各类信息不同的时间延迟要求.通过建立一个离散马尔科夫链模型对塑料光纤接入网的网络吞吐量和平均延时时间进行了数值分析和仿真实验,结果证明,这种多优先级控制协议能够适应多媒体网络中各类业务对信号时延要求的不同进行信道的优先级分配.     

基于光码分多址技术的塑料光纤局域网动态控制协议设计与仿真

本文提出一种基于光码分多址(OCDMA)技术的塑料光纤局域网的动态控制协议,用有限的码字来实现多于码字数目的多媒体工作站间的信息通信,而且当工作站数目增加时无需重新对网络进行初始化,工作站可随时加入网络.该协议特别适合可变信息长度的多媒体通信网络,通过数值分析和仿真实验,证明该动态控制协议的有效性和高效性.     

基于光纤布拉格光栅编解码器的直接序列扩频跳频光码分多址系统

提出了一种混合直扩跳频光纤码分多址（DS／FH－OCDMA）系统的实现方法，该系统采用跳频素数码作为扩频码，运用了光纤布拉格光栅序列作为编解码器，并在解码器两端安置了双硬限幅器以提高系统的性能，理论分析和仿真结果表明，该系统具有大用户容量，高功率效率和低误码率等方面的优点。     

基于超结构光纤光栅的正交四相光码分多址编/解码器

正交四相序列编码相比于二相序列具有更大的码字容量和更好的互相关特性,因此更适用于光码分多址(OCDMA)无源光接入网.提出并实现了一种基于超结构光纤光栅的正交四相光码分多址编/解码器.该编/解码器采用A族四相序列作为地址码,在制作的过程中仅需一个均匀相位掩模板即可实现编码功能,并且在性能上与传统工艺制作的编码器相当.为了与不同波长信道相匹配,提出了变信道编码技术,仿真结果表明采用该技术的编码器具有更高频谱效率,因此得到更好的编/解码性能.对一个码长63,长度4.1 cm的正交四相编/解码器进行了信息速率为2.5 Gb/s.码片速率为156 Gchip/s的编/解码实验,取得了较好的编/解码效果.     

基于步进啁啾光纤光栅的编解码器的OCDMA系统性能分析

对基于步进啁啾光纤光栅编解码器的OCDMA系统性能进行了分析,通过数值模拟得到系统性能与系统参数满足的关系,为改善系统性能提供可靠的依据.本文是对基于步进啁啾光纤光栅的OCDMA频阈相位编码一文的深化.     

DS-OCDMA系统中FBG编解码器的研究

详细阐述了平行结构和串联结构光纤布喇格光栅编解码器的设计思想,探讨了它们在直接序列扩频光纤码分多址系统中的应用,并推导了各自的编解码原理.通过分析相应系统在功率效率和误码率等方面的性能,得出了最佳的设计参量.结果表明,该编解码器除具有与同一结构类型的光纤延迟线编解码器相似的性能外,还具有相位编解码能力.     

用于步进啁啾光纤光栅的掩模板原理和设计

本文提出了用于步进啁啾光纤光栅制作的相位掩模板的原理和设计;最后,作为在OCDMA编/解码器中的应用,阐述了对步进啁啾光纤光栅进行强度调制地址码编码的实现方法.     

Stepped chirped fiber Bragg grating encoder/decoder for spectral OCDMA

Based on the coupled-mode theory of fiber grating and codes theory, the design of an optical code division multiple access (OCDMA) encoder/decoder with stepped chirped fiber Bragg grating (SCFBG) has been proposed. The length of each uniform subgrating, the realization of encoding and decoding are provided. Numerical result is also presented and discussed.     

Performance analysis of wavelength/spatial coding system with fixed in-phase code matrices in OCDMA network

This paper proposes a wavelength/spatial (W/S) coding system with fixed in-phase code (FIPC) matrix in the optical code-division multiple-access (OCDMA) network. A scheme is presented to form the FIPC matrix which is applied to construct the W/S OCDMA network. The encoder/decoder in the W/S OCDMA network is fully able to eliminate the multiple-access-interference (MAI) at the balanced photo-detectors (PD), according to fixed in-phase cross correlation. The phase-induced intensity noise (PIIN) related to the power square is markedly suppressed in the receiver by spreading the received power into each PD while the net signal power is kept the same. Simulation results show that the W/S OCDMA network based on the FIPC matrices cannot only completely remove the MAI but effectively suppress the PIIN to upgrade the network performance.     

Spectral coherent-state quantum cryptography

A novel implementation of quantum-noise optical cryptography is proposed, which is based on a simplified architecture that allows long-haul, high-speed transmission in a fiber optical network. By using a single multiport encoder/decoder and 16 phase shifters, this new approach can provide the same confidentiality as other implementations of Yuen's encryption protocol, which use a larger number of phase or polarization coherent states. Data confidentiality and error probability for authorized and unauthorized receivers are carefully analyzed.     

Complementary Walsh–Hadamard coded optical CDMA coder/decoders structured over arrayed-waveguide grating routers

In this paper, an optical code-division multiple-access (OCDMA) system with complementary Walsh–Hadamard coded optical encoder/decoder configuration structured over arrayed-waveguide grating (AWG) routers is examined. In the proposed system, each network user requires only two AWG routers to accomplish spectral encoding and decoding for complementary keying, thus, resulting a simpler and low cost system. Performance of the proposed system is analyzed by taking the effect of phase-induced intensity noise into account. The result indicates that the established system not only preserves the capability of suppressing multiple-access interference (MAI), but also improves bit-error-rate performance as compared to the conventional coders employing simple on-off keying.     

Tunable 2D time-wavelength optical CDMA encoder for differentiated service provisioning

We propose and demonstrate a reconfigurable tunable encoder for two-dimensional time-wavelength optical code division multiple access (OCDMA). This encoder is capable of creating 2D codes with variable code weight, enabling differentiated service provisioning. The demonstrated novel scheme uses ultra-fast optical delay lines and all-optical sampling while operating at 115 Gchip/s. Our proposed architecture provides an all-optical method of varying the code weight on a bit-per-bit basis, while maintaining the core architecture of a tunable OCDMA encoder.     

OMNI: An optoelectronic multichannel network interface based on hybrid CMOS-SEED technology

This paper presents a hybrid CMOS-SEED multiprocessor network interface smart pixel design that implements a reservation-based channel control protocol for collisionless concurrent access to multiple optical interprocessor communication channels. An asynchronous optical token is used as the arbitration mechanism for reservation control instead of slotted access. This work demonstrates that complex network protocol functions can be implemented using optoelectronic smart pixel technology.     

Hybrid WDMA/OCDM system with the capability of encoding multiple wavelength channels by employing one encoder and one corresponding optical code

<正>A hybrid wavelength division multiple access(WDMA)/optical code division multiplexing(OCDM) system is proposed,where the optical code is not the same as the address of every optical network unit(ONU); rather,the code is a virtual fiber of hybrid passive optical network(PON).To our knowledge,this is the first report analyzing a single encoder/decoder with a single corresponding optical code being exploited to encode/decode multiple wavelength signals simultaneously.This system enables OCDM to become transparent to ONU so that the existing wavelength division multiplexing(WDM) PON can be upgraded. Thus,redesigning the optical line terminal and ONU can be easily accomplished,and greatly decreasing the number of encoder/decoder becomes possible.In experiment,we only employ two encoder/decoder pairs to combine two WDM-PONs in one fiber.Simulation results confirm the feasibility of the proposed system.     

结构参数对串联微环谐振腔编解码器性能的影响

光码分多址系统中, 光编解码器是影响系统性能的关键因素之一.自相关峰值旁瓣比(P/W)、自互相关峰值比(P/C)是衡量编解码器性能的两个重要指标.以硅基SOI微环谐振腔为载体, 提出了一种串联三环阵列的二维相干OCDMA编解码器模型.详细研究了耦合系数、损耗系数、阵列间距以及通道间隔对微环谐振腔编解码器性能的影响.结果表明, 半径为50 μm的微环, 环与直波导间耦合系数在0.6–0.7之间, 环与环间耦合系数在0.1–0.2之间, 损耗系数 < 2 dB/cm, 阵列间距大于3 mm, 通道间隔在25–36 GHz间时, 编解码器能够获得良好的性能.     

基于超结构光纤光栅的全光编解码性能分析

分析了光码分多址(OCDMA)系统中超结构光纤光栅(SSFBG)编解码器的相关特性, 考虑了输入脉冲宽度、SSFBG编解码光栅之间的波长偏移以及光栅的折射率调制振幅对全光编解码性能的影响。结果表明, 随着输入脉冲宽度和编解码光栅之间的波长偏移量的增加, 自相关峰值旁瓣比和自互相关峰值比下降, 即编解码性能出现下降; 编解码器的插入损耗和相关性能间存在矛盾, 需要折中考虑SSFBG折射率调制振幅的选取。建立了基于SSFBG编解码器的时域相位编码OCDMA系统的数学模型, 考虑了差拍噪声、多址干扰、接收机噪声以及接收机的带宽限制对系统性能的影响, 采用全光阈值技术和turbo编码来提高相干扩时OCDMA的系统性能。     

适用于同步光码分多址通信系统的同步光码及其全光可调编/解码器

异步光码分多址通信系统,要求用户地址码具有好的循环自相关和互相关特性,因此,系统中的用户数受到很大的限制;而对同步光码分多址通信系统,只要求光地址码是非循环相关意义下的准正交,从而可实现较大的用户数,因此具有广阔的应用前景.实现同步光码分多址的关键之一是同步光码的设计和可调光编/解码器的实现.本文介绍了同步光码的构造方法,给出了同步光码的构造过程,分析了码的容量,提出了全光可调同步光码编/解码器的实现方法.     

Variable cross-correlation code construction for spectral amplitude coding optical CDMA networks

We present, for the first time, several aspects of incoherent optical code-division multiple access (OCDMA) codes, focusing on the flexible variable cross-correlation code allocation and its potential for future optical networks. We briefly present a new version of the Random Diagonal (RD) codes for Spectral-Amplitude Coding (SAC) OCDMA approaches. We then concentrate on the properties specific to such schemes allowing for its increased scalability and flexibility. The main coding properties are reviewed. The RD codes provide simple matrix constructions compared to the other SAC-OCDMA codes such as Hadamard, MQC and MFH codes. This code possesses such a numerous advantages, including the efficient and easy code construction, simple encoder/decoder design, existence for every natural number n, and variable in-phase cross-correlation and easy to implement using Fiber Bragg Gratings (FBGs). Finally, a new detection scheme called “NAND” detection is developed for the variable cross-correlation RD code.