光纤熔锥耦合器的声光调制特性

对光纤熔锥方向耦合器的声光强度调特性进行了实验研究,得到了工作波长为1310nm、声波频率为20.19kHz,电驱动功率为2.6mW,插入损耗为0.5dB,调制深度为64％的声光强度调制特性。     

光纤Fizeau干涉仪的声发射检测研究

验证了一种基于光纤Fizeau干涉仪的声发射传感器,可用于固体表面传播的超声波的检测.这种传感器的特点是能够精确地检测由固体表面传播的超声波产生的微弱振动.当超声波信号通过光纤传感器到达探测器时,干涉仪的输出光强度受到了超声信号的调制.通过检测干涉仪的输出光强度并利用Fourier变换,测得了超声信号的振幅和频率.对传感系统的相位调制特性进行了仿真,并对实验结果进行了分析.     

光纤声传感器研究

基于光纤的弯曲损耗原理，设计了一种新颖的光强度调制型声波传感器。与同类光纤声传感器相比，有更高的声光转换效率。     

细菌视紫红质用于光子逻辑门的研究

本文对基于细菌视紫红质变种材料D96N的三种基本光逻辑操作进行了研究.随着入射黄光强度的增加,菌紫质对黄光的吸收呈饱和吸收特性,此时紫光的照射将会使此饱和吸收阈值增加.在黄光和紫光对样品的共同作用下,透射光强度会被调制,调制的程度取决于这两束光的相对强度以及被调制光波长.通过观测被调制的525nm检测光强度,我们模拟了几种基本的光子逻辑运算:“非”、“或”和“与”运算.     

布里渊增强四波混频时域特性的理论研究

通过对布里渊增强四波混频(BEFWM)瞬态耦合波方程的数值求解，描述了共轭输出光的时域调制行为.同时，对能量耦合过程中起决定性作用的声学波的时空演化特征进行了模拟与分析，由此给出BEFWM时域特性物理机理的解释.研究表明，共轭光输出强度的波动与介质内声波场的分布和起伏相关联，共轭光波形调制现象的强弱取决于介质声子寿命、信号及抽运光强度、有效作用长度等诸多参数.     

利用石英晶体的线性电光和电致旋光强度调制

提出并实验研究了利用石英晶体自身特性产生光学偏置的线性电光调制器。利用某些电光晶体的自然旋光性和自然双折射,并合理设计晶体尺寸及其晶轴与光传播方向之间的夹角,可以提供所需要的光学偏置以实现大动态范围的线性电光调制。对于兼有电光和电致旋光效应的晶体,例如石英晶体,应考虑综合利用这两种效应对电光调制的贡献。实验研究了一块石英晶体的电光强度调制特性,在27V～4.5kV工频调制电压范围内,调制输出信号与调制电压之间的线性相关系数大于0.9999。     

振动声调制技术下微裂纹的非线性响应分析

采用非线性弹簧模型对振动声调制技术下微裂纹产生的非线性调制效应进行解释。从理论上分析了振动声调制技术下微裂纹产生非线性调制现象的原理,将微裂纹的开合状态等效为非线性弹簧。利用有限元软件构建并仿真微裂纹非线性弹簧模型,分别观察不同激励下裂纹界面的开合状态及混合声波的传播特性。结果表明,微裂纹界面随低频声波呈周期性开合,使得通过裂纹界面的高频声波与低频声波相互调制而产生非线性现象。在以上研究基础上,开展振动声调制实验研究。对比仿真结果,非线性调制系数R在实验条件下和仿真随低频激励幅值的变化趋势相同,证明了该模型的正确性。该模型为振动声调制技术应用于微裂纹的超声非线性检测提供了理论依据。      

电光与磁光效应的互补特性及其传感应用

研究了兼有电光效应和磁光效应的晶体内电光与磁光效应的互补特性及其传感应用. 在光强度调制条件下, 晶体中偏振光波的电光调制与磁光调制具有互相补偿的效果, 从而能够使输出光强度保持为一个固定值. 基于这种互补特性, 提出了一种利用单块闪烁锗酸铋(Bi₄Ge₃O₁₂, BGO)晶体的电光补偿型光学电流(磁场)传感器, 其光学传感单元由两个偏振器和一块平行四边形BGO晶体组成. 该晶体自身能够产生π/2的光学相位偏置, 同时兼用作电流传感和电光补偿元件, 通过控制BGO晶体的外加电压, 能够实时补偿被测电流(磁场)变化引起的磁光旋转角和输出光强度的变化, 从而实现电流(磁场)的闭环光学测量. 实验测量了5.0 A范围内的工频交流电流, 所需要的电光补偿电压约为21.2 V/A, 补偿电压与被测电流之间具有良好的线性关系, 其非线性误差低于1.7%.     

水下低频振荡涡流场声散射调制机理与特性研究

水下涡流场对声波的散射问题是声波在复杂流场中传播的基本问题,在水下目标探测和流场声成像领域具有重要意义.针对水下低频振荡涡流场声散射调制问题建立了理论分析模型与数值计算方法,探究了其声散射调制声场的产生机理与时空频特性.首先,基于运动介质的波动方程,通过引入势函数将波动方程分解为流声耦合项和非耦合项,并对流声耦合项进行频域分析处理,揭示了水下振荡涡流场的声散射调制机理;其次,采用间断伽辽金数值方法对水下低频振荡涡流场中声传播过程进行了数值模拟,分析了低马赫数条件下,不同入射声波频率、涡流场的振荡频率和涡核尺度对涡流场声散射调制声场时空频特性的影响规律,并结合理论分析模型对其特性进行了解释.研究表明:低马赫数下,振荡涡流场对声波的散射可产生包含涡流场振荡频率双边带调制谐波的散射调制声场,且随着入射声波频率、涡核尺度的增大,散射调制声场强度增强,总散射声场空间分布具有对称性和明显主瓣,且主瓣方位角趋近于入射波传播方向;在频率比远大于1条件下,涡流场振荡频率对散射调制声场强度影响较小.     

机械抖动棱镜式激光陀螺出射光强度特性

针对棱镜式激光陀螺在抖动状态下出射光强度被调制的现象, 系统地研究了机械抖动对棱镜式激光陀螺中光传输轨迹和光电探测器的影响机理. 在对现有棱镜式激光陀螺性能进行分析的基础上, 应用数值模拟和有限元分析方法, 将对称型全反射棱镜纳入四棱镜陀螺的结构设计方案, 并给出了由机械抖动引起的应力双折射和光电探测器位置偏移与出射光强度的一般关系. 结果表明, 机械抖动会使棱镜产生应力双折射, 使激光光路发生改变, 同时造成光电探测器与出射光束产生相对位移, 导致出射光强度幅值产生调制. 使用全对称型的陀螺结构, 选取具有合适折射率的对称型棱镜, 减小探测器与出射光斑中心的相对位移, 可以将出射光强度调制幅值相比原先减小52.63%以上, 显著地改善出射光强度被调制的现象. 此分析结果为提高激光陀螺的可靠性提供了重要参考.     

带有布喇格光栅的光纤失配耦合器的传输特性分析(英文 )

本文利用模式耦合理论,分析了光纤失配耦合器在耦合区带有一个布喇格光栅后两光纤中基模场的传输特性,得到基模场发生耦合现象的条件及满足的方程． 采用数值分析方法模拟耦合现象,并得出了带有布喇格光栅的光纤耦合器用于波分复用／解复用的最优化设计方案．     

带有布喇格光栅的光纤失配耦合器的传输特性分析

本文利用模式耦合理论,分析了光纤失配耦合器在耦合区带有一个布喇格光栅后两光纤中基模场的传输特性,得到基模场发生耦合现象的条件及满足的方程。采用数值分析方法模拟耦合现象,并得出了带有布喇格光栅的光纤耦合器用于波分复用/解复用的最优化设计方案。     

一种新型SOI Mach-Zehnder干涉型电光调制器的设计

在超紧缩双曲锥形3dB多模干涉耦合器的基础上,设计了一种新的Silicon-on-insulator (SOI) Mach-Zehnder干涉型电光调制器.与传统的Y分支器相比,双曲锥形3dB耦合器的制作容差大,而长度缩短了近30%,使得整个器件的尺寸大幅减小.调制区采用横向注入的PIN结构,模拟结果表明:当外加偏压为0.86V时,器件的调制深度最大,此时注入电流为13.2mA,对应的器件功耗为11.4mW.     

A method for the construction of hierarchical generalized space shift keying (GSSK) modulation for unequal error protection

In this paper, we propose a systematic method to achieve two-level unequal error protection (UEP) with generalized space shift keying (GSSK) modulation for multiple-input multiple-output (MIMO) systems. GSSK is a modulation scheme that encodes the source information in the antenna indices. To enable the nonuniform arrangement of the spatial constellation of GSSK modulation, new techniques are needed as new features of GSSK modulation are observed. The proposed method is based on first partitioning the GSSK constellation into subsets and then choosing constellation points inside a subset. The high-priority (HP) bits select the subset and the low-priority (LP) bits select constellation points inside a subset. The proposed subset partitioning procedure developed based on a theoretical study on set partitioning in the multidimensional space guarantees optimal or near-optimal HP protection, enables simple and systematic designs for LP protection, and increases the LP capacity. The proposed systematic design approach applies to systems with any numbers of transmit antennas and can create various hierarchical GSSK schemes with different HP/LP protection capabilities.     

High-performance unidirectional electrooptic modulator based on polymeric highly multi-mode waveguides

A unidirectional electrooptic modulator based on an asymmetrical highly multi-mode waveguide coupler is proposed. Firstly, the energy distributions of all the modes within two highly multi-mode waveguides are analyzed with eigenstate theory. Then, to achieve high switching performance in a guided-wave coupler, a dumping wall is placed on the larger waveguide of an asymmetric pair of waveguides, so that the larger waveguide has a dumping effect. This dumping effect makes the asymmetric highly multi-mode waveguide coupler possess a highly efficient unidirectional coupling process. Due to the large cross-section of the waveguide, a new modulation electrode structure is built. Based on this dumping effect, the unidirectional coupling process is theoretically modeled. Furthermore, in both scenarios, i.e., the unmodulated state and the electrooptically modulated state, the unidirectional coupling efficiencies are studied. As a result, not only can a high unidirectional coupling efficiency of 100% be achieved, but a high electrooptic modulation depth more than 90% can also be implemented in theory, and a high thermooptic modulation depth more than 90% under a low modulation voltage of 30 volts is also experimentally achieved. This device can be used for multi-mode optical interconnection systems such as data communication and fiber sensor networks.     

Generation of cylindrical vector beams in a mode-locked fiber laser using a mode-selective coupler

We experimentally obtain cylindrical vector beams(CVBs) in a passively mode-locked fiber laser based on nonlinear polarization rotation. A mode-selective coupler composed of both a single-mode fiber(SMF) and a twomode fiber(TMF) is incorporated into the cavity to act as a mode converter from LP01 mode to LP11 mode with broad spectral bandwidth. CVBs in different mode-locked states including single-pulse, multi-pulse, and bound pulse are obtained, for the first time to our best knowledge. The ultrafast CVBs with different operation states have potential applications in many fields such as laser beam machining, nanoparticle manipulation, and so on.     

自陡对光纤耦合器调制不稳定性的影响

当考虑自陡效应时,从光纤耦合器的耦合模方程出发,用偶奇超模对其进行了重写。讨论了当输入条件使奇偶超模的其中之一被单独激发时光纤耦合器中的自陡效应对调制不稳定性的影响。结果表明:在光纤耦合器中不论是正常色散区还是反常色散区,当输入功率一定时,随着自陡参数的增大,调制不稳定性增益谱较多地显示出了强度变弱和宽度变窄,最终导致光纤耦合器的超模发生畸变。     

All-fiber wavelength- and mode-selective coupler for optical interconnections

We experimentally demonstrate a new wavelength- and mode-selective coupler utilizing intermodal coupling between a standard single-mode fiber (SMF) and a hollow optical fiber (HOF). The fabricated device routes optical signals such that a 1.3-microm signal is directed to the HOF port, adiabatically converting the LP(01) mode into a ring-shaped mode, which can be further connected to a gigabit ethernet link, reducing the differential mode-dispersion penalty. Optical signals near 1.5microm , meanwhile, stay in the LP(01) mode of the SMF arm for further connection to conventional wavelength-division multiplexing links based on erbium-doped fiber amplifiers. The performance of the device is characterized in terms of insertion loss, channel isolation, and mode-conversion efficiency.     

双信道偏振复用保密通信系统的完全混沌同步的操控性研究

针对双信道偏振复用保密通信系统,利用线性电光效应,提出了一种新的完全混沌同步的控制方案.在该方案中,每一个线性偏振模的完全混沌同步质量随外加电场成准周期性变化.其变化规律:完全混沌同步?剧烈振荡;固定一定的外加电场,电光调制促使其完全混沌同步质量对偏置电流和反馈强度的稳健性获得极大的加强.在较大的偏置电流和反馈强度范围内,每一个线性偏振模能够实现完全混沌同步,并且调制到每一个线性偏振模的加密信号基本上能够恢复.