La0.5Sr0.5CoO3薄膜的外延生长及其机理研究

利用脉冲激光制膜法,在多种衬底和温度条件下,系统研究了La_0.5Sr_0.5CoO₃(LSCO)薄膜的结构和外延生长特性,在LaAlO₃,SrTiO₃和MgO衬底上实现了LSCO薄膜的外延生长.外延生长的薄膜具有低的电阻率和金属性导电特征.研究表明,外延生长的最佳温度范围为700—800℃,最佳衬底为LaAlO₃.并着重探讨了衬底材料和淀积温度等多种因素对LSCO薄膜的生长与性 关键词：     

利用脉冲激光沉积技术在双轴织构的Ni基带上外延CeO2薄膜

利用脉冲激光沉积技术在氢还原气氛下成功地在双轴织构的Ni基带上外延了高质量的CeO₂薄膜. x射线衍射θ—２θ扫描和ω扫描结果表明，CeO₂薄膜在Ni基带上呈c轴方向生长，存在很强的平面外织构；极图和φ扫描显示它具有良好的平面内织构. Ni基片上织构的CeO₂薄膜为进一步在其上外延高质量的YBa₂Cu₃O_7-x超导薄膜提供了很好的模板. 关键词： 双轴织构的Ni基带 2薄膜')" href="#">CeO₂薄膜 脉冲激光沉积     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

Pulsed laser deposition of BaGa<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper reports the first results obtained on monobarium gallate thin films grown on silicon and platinum coated substrates by pulsed laser deposition. The influence of oxygen background pressure and substrate (or post-annealing) temperature on the film properties was studied. The films were characterized by XRD, RHEED, AFM, photoelectron and electrical impedance spectroscopy. The structure analysis showed that the films crystallized into a hexagonal phase, most probably into (metastable) α-BaGa₂O₄. Depending on deposition conditions, films with different (from nearly epitaxial to polycrystalline) textures were obtained.     

Ferroelectric domain structures and polarization switching characteristics of polycrystalline BiFeO3 thin films on glass substrates

We investigated ferroelectric characteristics of BiFeO₃ (BFO) thin films on SrRuO₃ (SRO)/yttria-stabilized zirconia (YSZ)/glass substrates grown by pulsed laser deposition. YSZ buffer layers were employed to grow highly crystallized BFO thin films as well as SRO bottom electrodes on glass substrates. The BFO thin films exhibited good ferroelectric properties with a remanent polarization of 2P_r = 59.6 μC/cm² and fast switching behavior within about 125 ns. Piezoelectric force microscopy (PFM) study revealed that the BFO thin films have much smaller mosaic ferroelectric domain patterns than epitaxial BFO thin films on Nb:SrTiO₃ substrates. Presumably these small domain widths which originated from smaller domain energy give rise to the faster electrical switching behavior in comparison with the epitaxial BFO thin films on Nb:SrTiO₃ substrates.     

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

We have grown lead iron niobate thin films with composition Pb(Fe_1/2Nb_1/2)O₃ (PFN) on (0 0 1) SrTiO₃ substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM?0.09°). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness.     

Effect of substrate annealing on the quality of pulsed laser deposited Zn1−xMgxO thin films

The annealing effects of sapphire substrate before deposition on the quality of epitaxial Zn_1−xMg_xO thin films grown by pulsed laser deposition are reported. Our Experimental results indicate that the surface quality of Zn_1−xMg_xO thin films and hexagonal columnar growth is improved on the annealed sapphire substrate at high temperatures due to formation of atomic terraces on the substrate surface. The photoluminescence signals also increases with the increasing annealing temperature of the substrate.     

Laser applications in thin-film photovoltaics

We review laser applications in thin-film photovoltaics (thin-film Si, CdTe, and Cu(In,Ga)Se₂ solar cells). Lasers are applied in this growing field to manufacture modules, to monitor Si deposition processes, and to characterize opto-electrical properties of thin films. Unlike traditional panels based on crystalline silicon wafers, the individual cells of a thin-film photovoltaic module can be serially interconnected by laser scribing during fabrication. Laser scribing applications are described in detail, while other laser-based fabrication processes, such as laser-induced crystallization and pulsed laser deposition, are briefly reviewed. Lasers are also integrated into various diagnostic tools to analyze the composition of chemical vapors during deposition of Si thin films. Silane (SiH₄), silane radicals (SiH₃, SiH₂, SiH, Si), and Si nanoparticles have all been monitored inside chemical vapor deposition systems. Finally, we review various thin-film characterization methods, in which lasers are implemented.     

La0.7Ce0.3MnO3 epitaxial films fabricated by a pulsed laser deposition method

La_0.7Ce_0.3MnO₃ epitaxial films were successfully fabricated via a pulsed laser deposition method by controlling the experimental conditions. A series of experiments with varying the oxygen pressure and the substrate temperature demonstrated that the use of appropriate conditions is crucial for fabricating the epitaxial thin films. The existence of such suitable conditions was thermodynamically interpreted in terms of the stability of Mn²⁺ ion. Both XRD and EPMA measurements indicated that La_0.7Ce_0.3MnO₃ thin films fabricated herein form single phases, although it was difficult to present the direct experimental evidence to prove that Ce ion can really exist within the perovskite structure. The resultant films with oxygen annealing showed a metal-insulator transition and ferromagnetic property with Curie temperature of 275 K.     

Stress dependence of growth mode change of epitaxial layered cobaltite γ-Na0.7CoO2

We report stress dependence of growth characteristics of epitaxial γ-Na_0.7CoO₂ films on various substrates deposited by pulsed laser deposition method. On the sapphire substrate, the γ-Na_0.7CoO₂ thin film exhibits spiral surface growth with multi-terraces and highly crystallized texture. For the γ-Na_0.7CoO₂ thin film grown on the (1 1 1) SrTiO₃ substrate, the nano-islands of ∼30 nm diameter on the hexagonal grains are observed. These islands indicate that the growth mode changes from step-flow growth mode to Stranski-Krastanow (SK) growth mode. On the (1 1 1) MgO substrate, the large grains formed by excess adatoms covering an aperture between hexagonal grains are observed. These experimental demonstrations and controllability could provide opportunities of strain effects of Na_xCoO₂, physical properties of thin films, and growth dynamics of heterogeneous epitaxial thin films.     

Fermi surface topology effect on interlayer magnetoresistance with in-plane magnetic field in layered multiband system: Application to FeAs-based superconductors

We propose interlayer magnetoresistance experiments which provide information about Fermi surface topology in layered multi-band systems. The interlayer magnetoresistance shows an oscillating behavior with respect to the azimuthal angle of the applied in-plane magnetic field if the Fermi surface is anisotropic. We discuss applications to LaFeAsO, a parent compound of FeAs-based superconductors. We show the results on the paramagnetic state and the antiferromagnetic state based on a mean field calculation.     

Thickness-dependent transport properties of Sr4Fe6O13 epitaxial thin films

High-quality epitaxial thin films of Sr₄Fe₆O₁₃ have been deposited on NdGaO₃(001) substrates by pulsed laser deposition. The transport properties have been characterized by impedance spectroscopy. The temperature dependence of conductivity suggests a mechanism of adiabatic hopping by small polarons, in agreement with previous results in bulk samples. The transport properties show a clear dependence on the film thickness with the thinner films (10 nm) presenting conductivity values in oxygen one order of magnitude higher than the thicker ones (313 nm). We correlate this behaviour with the thickness dependence of the epitaxial strain.     

Phase growth control in low temperature PLD Co: TiO2 films by pressure

This paper reports on the structural and optical properties of Co-doped TiO₂ thin films grown onto (0001)Al₂O₃ substrates by non-reactive pulsed laser deposition (PLD) using argon as buffer gas. It is shown that by keeping constant the substrate temperature at as low as 310 °C and varying only the background gas pressure between 7 Pa and 70 Pa, it is possible to grow either epitaxial rutile or pure anatase thin films, as well as films with a mixture of both polymorphs. The optical band gaps of the films are red shifted in comparison with the values usually reported for undoped TiO₂, which is consistent with n-type doping of the TiO₂ matrix. Such band gap red shift brings the absorption edge of the Co-doped TiO₂ films into the visible region, which might favour their photocatalytic activity. Furthermore, the band gap red shift depends on the films’ phase composition, increasing with the increase of the Urbach energy for increasing rutile content.     

Effect of CO2 laser irradiation on the transport properties of La0.67Ba0.33MnO3 thin film

The effect of CO₂ laser irradiation on La_0.67Ba_0.33MnO₃ epitaxial thin film was investigated. Epitaxial thin films grown by pulsed laser deposition were irradiated by a CO₂ laser in air for 10-60 s. It is shown that after CO₂ laser irradiation treatment, the crystallinity of the film is strongly enhanced. It is found that a dramatic decrease in the resistivity of the CO₂-laser-irradiated film is accompanied by a remarkable increase in its insulator-metal transition temperature and the temperature coefficient of resistance. This significant improvement of its structure and properties is achieved in several dozens of seconds and surpasses that observed in films annealed in an oxygen atmosphere at 900 ^°C for 12 h, suggesting that CO₂ laser irradiation is a new and effective tool to optimize CMR manganites for bolometric applications.     

Adsorption properties of Mg–Al layered double hydroxides thin films grown by laser based techniques

Powdered layered double hydroxides (LDHs) have been widely studied due to their applications as catalysts, anionic exchangers or host materials for inorganic and/or organic molecules. Assembling nano-sized LDHs onto flat solid substrates forming thin films is an expanding area of research due to the prospects of novel applications as sensors, corrosion-resistant coatings, components in optical and magnetic devices.Continuous and adherent thin films were grown by laser techniques (pulsed laser deposition – PLD and matrix assisted pulsed laser evaporation – MAPLE) starting from targets of Mg–Al LDHs. The capacity of the grown thin films to retain a metal (Ni) from contaminated water has been also explored. The thin films were immersed in an Ni(NO₃)₂ aqueous solutions with Ni concentrations of 10^?3% (w/w) (1 g/L) and 10^?4% (w/w) (0.1 g/L), respectively. X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX) were the techniques used to characterize the prepared materials.     

Pulsed laser deposition of a PBN:65 morphotropic phase boundary thin film with large electrostriction

We deposited epitaxial thin films of Morphotropic Phase Boundary (MPB) Pb_0.65Ba_0.35Nb₂O₆ (PBN:65) on MgO substrates using pulsed laser deposition. Afterwards, a novel transmission optical experiment was developed to measure the electric field-induced bending angle of the thin film sample using a divergent incident light. From which the electric field-induced strain was obtained, and it was used to calculate the electrostrictive constant of the PBN thin film. The result is 0.000875 μm²/V², and it is consistent with what we measured in the reflection experiment     

Electrical properties of Sb-doped epitaxial SnO2 thin films prepared using excimer-laser-assisted metal–organic deposition

Excimer-laser-assisted metal–organic deposition (ELAMOD) was used to prepare Sb-doped epitaxial (001) SnO₂ thin films on (001) TiO₂ substrates at room temperature. The effects of laser fluence, the number of shots with the laser, and Sb content on the electrical properties such as resistivity, carrier concentration, and carrier mobility of the films were investigated. The resistivity of the Sb-doped epitaxial (001) SnO₂ thin film prepared using an ArF laser was lower than that of the film prepared using a KrF laser. The van der Pauw method was used to measure the resistivity, carrier concentration, and carrier mobility of the Sb-doped epitaxial (001) SnO₂ thin films in order to determine the effect of Sb content on the electrical resistivity of the films. The lowest resistivity obtained for the Sb-doped epitaxial (001) SnO₂ thin films prepared using ELAMOD with the ArF laser and 2 % Sb content was 2.5 × 10^?3 Ω cm. The difference between the optimal Sb concentrations and resistivities of the films produced using either ELAMOD or conventional thermal MOD was discussed.     

Control of p-type conductivity in Sr doped LaTiO3 thin films

We report on in situ growth by pulsed laser deposition of Sr-doped LaTiO₃ (Sr, 0<x<0.1) thin films, with epitaxial c-axis perovskite structure. According to the increase of Sr doping, resistivity of samples decreases and films reveal metallic behaviour. We found that both crystallographic and electrical properties are very sensitive to oxygen pressure during the deposition. The charge carrier was found to be p-type for Sr doping from 0 to 10% and mobility is much higher than previously reported.     

Effect of Mg doping and substrate temperature on the properties of pulsed laser deposited epitaxial Zn1?xMgxO thin films

In this paper, we report on the pulsed laser deposition of epitaxial (0002) oriented Zn_1−x Mg _x O thin films onto (0001) sapphire substrate in O₂ ambient at different deposition temperatures. Pulsed laser deposited Zn_1−x Mg _x O films showed (0002) oriented hexagonal wurtzite structure up to 34% of Mg concentration. The bandgap of Zn_1−x Mg _x O thin films is successfully tuned from 3.3 to 4.2 eV by adjusting the Mg concentration x=0.0 to x=0.34. Pulsed laser deposited Zn_1−x Mg _x O thin films were characterized by XRD, AFM, SEM, PL and UV–VIS spectrometer. We have also studied the effect of deposition temperature on to the structure, surface morphology and optical properties of Zn_1−x Mg _x O thin films.     

Multiferroic properties of Bi0.8La0.2FeO3/CoFe2O4 multilayer thin films

Bi_0.8La_0.2FeO₃/CoFe₂O₄ (BLFO/CFO) multilayer thin films (totally 20 layers BLFO and 19 layers CFO) were prepared on Pt/Ti/SiO₂/Si substrates by pulsed laser deposition. X-ray diffraction and transmission electron microscope measurements show that the films are polycrystalline and consisted of multilayered structure. Ferroelectric hysteresis loops with remnant polarization and saturated polarization of 4.2 and 13.3 μC/cm², respectively, were observed. On the other hand, the films show well-shaped magnetization hysteresis loops with saturated and remnant magnetization of 34.7 and 11.4 emu/cm³, respectively, which are significantly larger than pure BLFO thin films deposited under the same conditions. These results indicate that constructing epitaxial superlattice might be a promising way to fabricate multiferroics with improved properties.