不同高光谱特征参数区分马铃薯品种的优劣势分析

对马铃薯关键生育期的高光谱遥感图像进行特征提取和分析,提出了一种快速区分不同马铃薯品种的方法。以两个早熟和中熟马铃薯品种为研究对象,采集其块茎形成期、块茎膨大期和淀粉积累期的冠层反射光谱曲线,对实测反射光谱曲线进行Savitzky-Golay滤波平滑和一阶微分处理,以高光谱位置参数、振幅参数、面积参数、宽度参数和反射率参数为研究指标,根据21个高光谱特征参数的贡献率大小,评价了其区分不同马铃薯品种的优劣。结果表明：(1)同一类高光谱特征参数在不同生育期区分马铃薯品种的能力不同: 高光谱位置参数、宽度参数和反射率参数在块茎膨大期区分不同马铃薯品种的能力最强,淀粉积累期次之;高光谱振幅参数和面积参数在淀粉积累期的区分能力最强,块茎膨大期次之,五类高光谱特征参数在块茎形成期的区分能力均最差。(2)同一生育期5类高光谱特征参数区分马铃薯品种的能力也存在差异。在块茎形成期,五类高光谱特征参数的区分能力从强到弱依次为：反射率参数>振幅参数>面积参数>宽度参数>位置参数;在块茎膨大期和淀粉积累期,从强到弱依次为：面积参数>振幅参数>反射率参数>宽度参数>位置参数。综合能力从强到弱依次为：面积参数>振幅参数>反射率参数>宽度参数>位置参数。     

一种迭代的锥束计算机层析成像系统几何全参数标定方法EI北大核心CSCD

计算机层析成像(CL)系统对于扁平状物体的检测具有独特的优势,几何参数标定是CL系统获得高质量图像的重要步骤。现有CL系统几何参数标定方法仅能标定部分几何参数,难以一次完成所有几何参数的标定。借鉴计算机断层成像(CT)系统几何参数标定方法,提出了一种高精度的迭代标定方法,利用简单体模快速标定CL系统的所有几何参数。对CT系统几何参数标定方法用于CL系统的有效性进行分析,确定对CT系统几何参数标定方法敏感的CL系统几何参数;根据CL系统投影几何关系,构建新的反映CL实际系统与理想系统间误差的非线性最小二乘目标函数,利用迭代法不断优化敏感参数和其他关键参数。实验结果表明,本文方法能够有效标定CL系统所有几何参数,敏感参数以及受敏感参数影响的其他几何参数标定精度均有明显提升。利用已标定的几何参数重建三维Shepp-Logan体模和印刷电路板体模,重建图像中没有几何伪影,验证了算法的有效性。     

生物组织光学参数与热物性参数的相关性研究

基于组织光学和人工神经网络理论,提出了一种全新的确定生物体热物性参数的方法.利用积分球系统测量介质组织光学特性参数,以该特性参数作为人工神经网络输入变量,以热物性参数为目标变量,利用神经网络的自学习系统,最终建立光学特性参数与热物性参数间的非线性映射一黑箱模型.为验证模型,测量了多种热物性参数已知物质的光学特性参数,然后由黑箱模型得到热物性参数计算值,计算值和已知真实值的相对误差均在5%以内.该方法可用于测量生物体的各种热物性参数.     

炸药爆轰产物Jones-Wilkins-Lee状态方程不确定参数

Jones-Wilkins-Lee (JWL)状态方程是一种不显含化学反应、由实验方法确定参数的半经验状态方程, 能比较精确地描述爆轰产物的膨胀驱动做功过程. 在JWL状态方程中有多个未知(不确定)参数需要确定. 传统的确定JWL状态方程参数的方法是“调参数”, 人为因素影响较大, 无法给出参数的不确定性信息. 本文利用贝叶斯分析方法研究了炸药的不确定参数, 该方法能够基于以往的认识、实验和模拟数据标定(calibration)不确定参数. 在本文结果中, 不确定参数的后验分布均值与文献结果相符合, 基于参数标定结果的数值模拟90%置信区间完全包含实验数据. 数值标定结果说明贝叶斯参数标定适用于确定样品炸药的JWL状态方程参数. 特别是, 在本文JWL状态方程参数标定过程中极大地减少了人为因素的影响.     

Hindmarsh-Rose混沌神经元自适应同步和参数识别的优化研究

以Hindmarsh-Rose混沌神经元模型为例,讨论了基于自适应同步识别混沌系统多个参数方法的优化问题.在构造的李亚普诺夫函数中引入可调节的增益系数来控制系统同步和参数观测器的暂态过程长短.在应用单个控制器和5个参数观测器来同步和识别Hindmarsh-Rose混沌神经元中5个未知参数时发现最小参数的识别结果出现了振荡而其他参数都能准确识别现象,分析其原因可能在于要识别的目标参数的巨大差异性.通过增加控制器的个数(选择两个控制器)可以克服这个困难.研究发现增益系数太小不能实现完全同步和参数的准确识别,当增益系数太大则延长了识别参数的暂态过程.在恰当的增益系数下可以在比较短的暂态过程下准确识别系统参数.进一步讨论了系统参数发生阶跃变化时系统参数的识别问题,数值计算结果验证了该方法的可靠性和有效性.     

CUSI网络与遗传算法结合计算油气储层物性参数

油气储层物性参数(简称储层参数)是储层描述的重要参数。考虑到地震数据求取储层参数的复杂性与BP网络非线性映射需要利用全体样本信息且学习效率低等不足,提出采用完全利用样本信息(CUSI)的网络与遗传算法结合计算储层参数的方法。     

基于高斯过程回归的距离选通成像系统工作参数的在线优化

通过调整模块的工作参数,提出了一种对距离选通成像系统性能进行在线优化的方法。将眼图参数视为一个随系统可调参数变化的随机变量,采用高斯过程回归方法拟合此变化关系,并在学习过程中引入参数优化步骤,从而在更快速地从高维参数空间中学习到随机过程变化特征的同时优化系统参数。实验结果表明:所提方法可在线优化系统参数配置,提高距离分辨能力,揭示模块参数配置对距离分辨能力的影响,可为成像系统的设计提供一定依据。     

汉语促化元音的声学分析

汉语入声音节中的元音多表现为短而促的特点,为分析这一现象,借鉴参数统计模型的思路,提出了声学参数的选取、参数作用的检验与参数分类的自动检测的一套方法。采用了概率分布的一般方法对声学参数进行描写以选取有效声学参数,采用了二元与多元逻辑回归模型的方法对参数的分类作用进行检验,采用了支持向量机模型对参数的分类结果进行自动检测。模型检验显示,对促化元音的外部分类,时长与DCT_1~3四维参数有显著性作用,对内部分类,DCT_0~3四维参数有显著性作用。自动检测结果显示,外部分类中四维参数的促化元音检测率约仅为43.6%,内部检测的总检测率约为96.1%,说明促化作为元音的附加性特征更为突出。      

基于参数切换算法的混沌系统吸引子近似及其电路设计

基于参数切换算法和离散混沌系统, 设计一种新的混沌系统参数切换算法, 给出了两算法的原理. 采用混沌吸引子相图观测法, 研究了不同算法下统一混沌系统和Rössler混沌系统参数切换结果, 最后引入方波发生器, 设计了Rössler混沌系统参数切换电路. 结果表明, 采用参数切换算法可以近似出指定参数下的系统, 其吸引子与该参数下吸引子一致; 基于离散系统的参数切换结果更为复杂, 当离散序列分布均匀时, 只可近似得到指定参数下的系统; 相比传统切换混沌电路, 参数切换电路不用修改原有系统电路结构, 设计更为简单, 输出结果受方波频率影响, 通过加入合适频率的方波发生器, 数值仿真与电路仿真结果一致.     

太阳电池单二极管模型中的参数提取方法

近年来,太阳电池参数提取方法获得了广泛关注.原因在于匹配的电池参数,可以有效减少内外因素对光伏阵列发电效率的影响.本文以太阳电池单二极管模型为讨论对象,对其五个参数的提取方法进行了详细介绍;对目前典型的四类太阳电池参数提取方法 (即解析提取参数方法,借助朗伯W函数函数提取参数方法,构建或利用特殊函数提取参数方法,利用智能算法提取参数方法)进行归纳与总结.阐述了这些方法的主要理论与实现途径,更重要的是对它们的优缺点进行了探讨.最后,对参数提取未来的研究动态进行了展望,以期对参数提取方法提供一些思路,为国内同行开展相关研究提供一些帮助.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.     

Direction-of-arrival estimation using matrix spatial prefiltering approach

An approach to direction-of-arrival （DOA） estimation for multiple narrowband farfield signals is proposed. The technique uses a novel matrix spatial prefiltering approach. Specifically, a matrix filter is designed to spatially filter the incoming data snapshots. The un-wanted components arriving from the stopband angular sectors are attenuated and the desired components from the angular sector of interest pass with minimal distortion. The matrix filter spatially filters the element-space data and the output reserves the element-space data property, which makes it very useful by passing sensor data through a spatial prefilter prior to applying many other array processors to attenuate interferences and improve system performance. Several examples of DOA estimation problem are presented to illustrate the performance of the proposed spatial prefiltering approach. Results of simulation and real data show that the pre-filter can efficiently attenuate the spatial interferences and significantly improve the estimation and resolution capability of DOA estimators at low signal-to-noise ratios for the sources located inside the passband sector. In addition, the use of spatial prefilter makes it possible to estimate DOAs for multiple sources more than the number of the elements of an array.     

Quantum efficiency calibration of opto-electronic detector by means of correlated photons method

A new calibration method of detectors can be realized by using correlated photons generated in spontaneous parametric down-conversion (SPDC) effect of nonlinear crystal.An absolute calibration system of detector quantum efficiency is performed.And its principle and experimental setup are introduced.A continuouswave (CW) ultraviolet (351 nm),diode-pumped,frequency-doubled,and solid-state laser is used to pump BBO crystal.The quantum efficiencies of the photomultiplier at 633,702,and 789 nm are measured respectively.The coincidence peaks are observed using coincidence circuit.Some measurement factors including the filter bandwidth of trigger channel,the detector position alignment and polarization of the pump light are analyzed.The uncertainties of this calibration method are also analyzed,and the relative uncertainties of total calibration are less than 5.8%.The accuracy of this method could be improved in the future.