被孔隙介质约束的弹性杆中的导波*

为了研究导波在被孔隙介质约束的弹性杆结构中的传播规律,分析孔隙参数对导波传播特性的影响,本文建立了无限大孔隙介质包裹圆柱体的理论模型,利用孔隙介质弹性波动理论,分析了导波的频散曲线,以及圆柱半径和孔隙参数对于导波传播特性的影响。结果表明,在该结构中传播的纵向导波存在频散特性。内部圆柱半径的改变影响波导结构,从而影响导波传播。外部孔隙介质的渗透率对于导波频散的影响较小,孔隙度的改变影响孔隙介质体波波速,从而影响导波频散曲线的截止频率。同时,导波存在较小的衰减,且衰减随孔隙度增大而增大。这些结果对于后续开展无限大介质包裹弹性杆结构的超声无损评价提供了一定的理论参考。     

孔隙介质包裹的充液管道结构中导波传播特性

研究孔隙介质包裹的充液管道中纵向导波传播特性,分析孔隙介质参数对频散曲线的影响。建立了孔隙介质包裹充液管道的结构模型,利用孔隙介质弹性波动理论,建立对应的频散方程,数值模拟计算得到该模型的频散曲线和时域波形,并分析了孔隙介质参数以及管壁厚度对频散曲线的影响。结果表明孔隙介质的渗透率对于导波频散的影响较小,孔隙度的改变对时域波形的位移幅度影响较大。同时,导波存在衰减,且衰减随孔隙度增大而增大。所得结论为埋地管道无损检测方面提供一定理论参考。      

无限流体中孔隙介质圆柱周向导波的传播特性

为研究无限大流体约束的孔隙圆柱中周向导波的传播规律,分析孔隙参数对导波传播特性的影响,建立了无限流体中孔隙介质圆柱的理论模型,利用孔隙介质弹性波动理论,建立了周向导波频散方程,通过数值模拟计算得到无限流体中孔隙介质圆柱的频散曲线,探讨了圆柱半径和孔隙参数对导波传播特性的影响,并对导波的衰减特性进行了分析;通过数值计算,得到了周向导波的时域波形,讨论了孔隙参数对波形的影响.结果表明,孔隙介质圆柱半径的改变影响圆柱尺度,孔隙度的改变影响孔隙介质中体声波的波速,都对周向导波频散曲线产生一定的影响,所得到的频散曲线特征及衰减曲线与时域波形吻合.研究结果对开展无限流体中孔隙介质圆柱的超声无损评价提供了一定的理论参考.     

小波时-频变换的高强钢丝弹性波传播模态分析

超声导波是近年来桥梁拉索无损检测研究的重要方法之一。针对弹性波在高强钢丝介质中传播的多模态频散问题,采用单点时域波形的小波时频变换进行混叠信号的模态识别分离。通过数值求解Pochhammer频率超越方程,计算得到0~1.5 MHz范围内纵向导波模态理论频散曲线;采用有限元模拟半波正弦脉冲激励导波在钢丝中传播过程,由小波时-频变换得到导波模态分布,并进行了不同腐蚀程度钢丝实验对比分析。结果表明,经小波时-频变换得到的第1、2、3阶纵向导波模态与理论值对应吻合,单点时域波形的小波时-频变换结果能够有效识别高强钢丝中的导波模态;钢丝在无腐蚀状态下,一阶纵向导波模态能量占比达57.74%,随腐蚀程度增加,能量更为集中到一阶纵波模态,二阶模态能量逐渐减小。     

管道弯头对低频纵向导波传播特性影响分析

管道弯头显著改变了导波传播特性,影响了对检测信号的解读,研究弯头对导波传播特性的影响是实现复杂管道系统导波检测的基础。采用半解析有限元法计算弯管导波频散曲线,分析了弯管导波频散曲线所呈现的不同特征,并基于弯管导波频散曲线,以低频L(0,1)模态导波为研究对象,实验研究了低频L(0,1)模态导波通过管道弯头时的模态变换特征。研究结果发现,当L(0,1)模态导波通过管道弯头时,不仅会发生L(0,1)到F(1,1)的模态变换,还会模态变换出反向L(0,1)模态导波,即弯头反射现象,且随着激励频率的降低和弯头弯曲半径的减小,弯头反射现象愈发明显。研究结果将深化对弯管导波传播特性的认识,推动导波检测技术在复杂管道系统检测中的应用。      

含孔隙分层半空间中瑞利波的传播特性研究

为了研究含孔隙介质分层半空间中瑞利波的传播规律,分析孔隙介质参数对瑞利波频散曲线的影响,本文进行了数值模拟研究。采用传递矩阵算法,计算了含孔隙分层半空间中一定频率范围内瑞利波所有模式的频散及激发强度曲线,并与均匀弹性固体分层半空间情况作了类比分析,在含孔隙覆盖层的两层模型和含低速孔隙夹层的三层模型下,详细研究了孔隙度、渗透率、层厚度等参数对瑞利波各模式的影响,发现孔隙度及层厚度的变化对频散曲线影响较大,而渗透率的变化对频散曲线影响较小。      

液态金属快堆主管道中超声导波传播特性研究

讨论了钠冷快堆(Sodium-cooled Fast Reactor,SFR)主管道的整体温度和内部液态金属钠流动速度的变化对管道导波传播特性的影响。推导了充液管道中导波频散方程的一般形式,并给出了管道内液态金属钠处于流动状态下的导波频散方程。采用数值计算方法获得了管内液态金属钠处于不同温度和不同流速时的导波纵向模式频散曲线和导波时域波形。结果表明,温度变化对基阶纵向模式的影响较小,但对高阶纵向模式的影响较大;液态钠流速增大会使导波频散曲线向高频轻微移动,但在实际检测中可以忽路管内液体流动速度的影响。通过对时域接收波形的模拟计算,进一步考察了液态金属钠的温度及流动速度变化对导波传播的影响,并通过对比不同模态的激发特点和不同频段的导波时域波形特点,结合导波频散曲线,给出了适用于SFR管道超声无损检测的导波模态和声源激发频段选择方案。      

带粘弹性包覆层充液管道中的超声导波纵向模态

理论分析和实验研究了超声导波纵向模态在带粘弹性包覆层充液管道中的传播特性。得到了纵向模态的频散曲线。以此确定了适合带粘弹性包覆层充液管道缺陷检测的一定频带的纵向模态。经分析认为,频散小,衰减低的频带0～50 kHz的L(0,1)模态和未受干扰的L(0,2)模态分支部分,如频带170～210 kHz的L(0,4)模态,适合检测外直径25 mm,壁厚1．2 mm,外壁涂覆0．35 mm厚环氧树脂的充水钢管中的缺陷。而频散和衰减大,能量主要在水或环氧树脂粘弹性层中传播的纵向模态则不适合检测该类管道中的缺陷。     

流体-孔隙介质圆柱界面波传播特性

研究流体-孔隙介质圆柱界面波传播特性,分析孔隙介质孔隙率等参数对频散曲线的影响。理论上建立了无限大流体包裹孔隙介质圆柱界面波的模型,利用孔隙介质弹性波动理论,通过数值模拟计算得到流体-孔隙介质圆柱的频散曲线及时域波形,并分析了孔隙介质为开孔和闭孔状态下孔隙介质圆柱半径、孔隙率及渗透率对频散曲线的影响。结果表明,时域上斯通利波可以被明显区分开,孔隙介质圆柱半径的变化改变了圆柱尺度,孔隙率的变化改变了孔隙介质的纵、横波波速,因此对于斯通利波频散曲线的影响较大。而渗透率的变化既不改变圆柱的尺度也不改变孔隙层的纵、横波速度,因此对斯通利波频散曲线影响较小。      

充水粘弹性管道的频散曲线计算分析*

针对谱方法分析计算充水粘弹性管道的广义特征值问题,根据Chebyshev多项式及微分矩阵、位移和应力连续条件,将波动方程离散为相应的线性方程。利用MATLAB数值编程计算充水弹性和粘弹性管道对应频率下的轴对称纵向导波频散曲线和衰减曲线。分析表明,波传播在粘弹性管道中不仅具有衰减特性,而且由于水和粘弹性壳体交叉耦合作用,在一定频率范围内产生两种截断模态。     

Propagation characteristics of guided waves in a liquid filled pipe embedded in a porous medium

A model of a liquid-filled pipe embedded in a porous medium is built to research its wave propagation characteristics,and to analyze the effect of the parameters of porous media on the dispersion.The dispersion equations are established on the basis of the elastic-dynamic theory of the liquid-saturated porous solid.The characteristic of dispersion and the time domain waveform in pipes of different thicknesses and with different porous-medium parameters are discussed theoretically and numerically.Results reveal that the porosity has little impact on dispersion,and the attenuation of guided wave increases with porosity,whilst the porosity influences the displacement amplitude of the time domain waveform.It is hard to detect the permeability variation of the media by the dispersion.The drawn conclusion can provide some theoretical instruction and guidance for the nondestructive testing of buried pipe.     

分层固体板中导波的激发与频散特性

针对无限大弹性分层固体板,研究了结构中导波的频散和激发特性。首先使用传递矩阵法推导分层板模型中导波的频散方程,然后用二分法求取导波各模式的频散曲线,进而分析结构中导波的频散特性。结果表明:在速度递增或递减的分层板中,基阶模式和高阶模式的高频极限分别等于低速层的瑞利波速和横波波速。对于含低速夹层的分层板,所有模式的高频极限都等于低速层的横波速度。在导波激发特性方面,研究了在具有一定宽度的法向力源作用下的分层板中导波各模式在结构中的法向位移谱。发现在速度递增的分层板结构中基阶模式是主导模式,而对于速度递减和含低速夹层模型,主导模式在不同的频段范围内对应不同的导波模式。      

Dispersion characteristics of surface magnetostatic waves with dissipation

It is shown that unlike undamped waves, the dispersion characteristics of spin surface waves with dissipation have a maximum wave number at which there is a downward reversal in the dispersion curve of a wave number. This forms the upper branch of a dispersion curve with inverse dispersion and high attenuation, leading to an unclear frequency dependence of the wave vector. The lower primary dispersion branch corresponds to waves with forward dispersion, and attenuation is proportional to the small parameter of dissipation. However, the coefficient of wave attenuation grows sharply near the maximum wave number. Some angular and frequency limits of surface wave propagation change as well.     

Analysis of surface and guided wave plasmon polariton modes in insulator–metal–insulator planar plasmonic waveguides

Theoretical and experimental study of the surface plasmon–polariton and guided wave plasmon polariton modes is presented for the Sapphire/Ag/Polycarbonate/Air structure. Theoretical results are obtained by solving complex multilayer eigenvalue equations as well as the reflectivity equation for this structure. It is proposed that the mode attenuation can be significantly reduced by inserting a low index dielectric buffer between the metal and the guiding dielectric layer. The dispersion and attenuation curves are generated. Both the surface plasmon and guided wave plasmon polariton modes are studied experimentally. The experimental values of the effective refractive indices agree well with the theoretical values. The electric field profiles are generated and used to examine the nature of modes. After optimization of various parameters the condition for low loss single mode guiding is obtained for the proposed structure. Effect of metal thickness on surface plasmon mode is also discussed. It is inferred that in a properly optimized plasmonic waveguide, the losses can be reduced by a factor of 4.     

Effect of porous surface layer on wave propagation in elastic cylinder immersed in fluid

To study the damage to an elastic cylinder immersed in fluid, a model of an elastic cylinder wrapped with a porous medium immersed in fluid is designed. This structure can both identify the properties of guided waves in a more practical model and address the relationship between the cylinder damage degree and the surface and surrounding medium. The principal motivation is to perform a detailed quantitative analysis of the longitudinal mode and flexural mode in an elastic cylinder wrapped with a porous medium immersed in fluid. The frequency equations for the propagation of waves are derived each for a pervious surface and an impervious surface by employing Biot theory. The influences of the various parameters of the porous medium wrapping layer on the phase velocity and attenuation are discussed. The results show that the influences of porosity on the dispersion curves of guided waves are much more significant than those of thickness, whereas the phase velocity is independent of the static permeability. There is an apparent "mode switching" between the two low-order modes. The characteristics of attenuation are in good agreement with the results from the dispersion curves. This work can support future studies for optimizing the theory on detecting the damage to cylinder or pipeline.     

Guided waves in a stratified half-space

The dispersion and excitation mechanisms and the energy distribution of guided waves in a stratified half-space are studied. All possible guided waves excited by a symmetric point source in two or three-layer medium models and their relation to the medium parameters are analyzed in detail. The excitation and propagation characteristics, as well as the energy distribution along the depth direction, of all modes of the surface waves and trapped waves are numerically investigated and analyzed thoroughly not only in the case when the shear wave velocity increases from up to down layers but also when a low-velocity layer is contained in halfspace, especially when the shear wave velocity decreases from up to down layers. It is found that there exist many guided wave modes in the case where the shear wave velocity of each layer increases from up to down layers. However, there is less than one guided wave mode in the case where the shear wave velocity of each layer decreases from up to down layers. The trapped waves exist and propagate along the low-velocity structure in the stratified half-space. It is also found that the characteristic of a mode is related to the source frequency. It is possible that a surface wave at one value of frequency is like a trapped wave at another value of frequency. Finally, the relation of the characteristics of all guided waves (surface waves and trapped waves) to the parameters of media is studied.     

The effect of pipe bend on low-frequency longitudinal mode guided wave propagation

The pipe bend significantly changes the propagation characteristics of guided wave,and makes the interpretation of the received signals difficult.Therefore,better understanding of guided wave propagating in bended pipe is essential for the inspection of pipeline comprising bends.First of all,the different features of dispersion curves derived with the semi-analytical finite element method for guided wave in bended pipes are summarized.Secondly,based on the dispersion curves for guided wave in bended pipes,experiments are performed to investigate the mode conversions of L(0,1) mode guided wave traveling through pipe bends.It is found that,except for the mode conversion from L(0,1) to F(1,1),the L(0,1) reflections of bends are also observed in some cases,which are proven to be the mode converted negative L(0,1)mode guided wave,and the negative L(0,1) mode guided wave becomes more obvious with the decrease of excitation frequency and bending radius.The findings of this paper will provide some insight for guided wave behavior in bended pipe,and generalize the application of guided wave inspection in practical pipelines.