奥氏体不锈钢窄间隙焊缝侧壁未熔合相控阵超声检测*

针对核电站主管道奥氏体不锈钢窄间隙焊缝侧壁未熔合超声检测困难的问题,该文开展基于电子背散射衍射技术的相控阵超声检测研究,并结合全聚焦方法和相位相干成像方法抑制结构噪声。利用电子背散射衍射技术建立壁厚69.5 mm,且同时包含母材和焊缝的奥氏体不锈钢窄间隙焊缝模型。沿焊缝熔合线设置深度26.5 mm、高度3.0 mm的侧壁未熔合,经过仿真优化确定了中心频率2.25 MHz、32阵元以及45°纵波楔块的相控阵超声检测参数。仿真和实验检测结果显示,侧壁未熔合检测信噪比相差不超过0.6 dB,验证了所建模型的有效性。在此基础上,利用全聚焦方法和相位相干成像方法削弱结构噪声,检测信噪比较相控阵扇扫描图像分别提升2.3 dB和4.7 dB,且侧壁未熔合深度与高度定量误差均不超过6.7%。     

扩散场扇扫重建格林函数实现近表盲区缺陷检测

2020年5月12日定稿摘要针对结构近表盲区缺陷检测难题,发展了一种扩散声场扇扫重建格林函数的超声检测方法。在对扩散场扇扫重建格林函数理论分析的基础上,通过5 MHz超声相控阵探头对铝块近表盲区缺陷进行了检测实验并对影响成像结果的延时时间、时间窗宽和扫查方式进行了分析。结果显示,该方法可以有效检测铝块近表1.5~3 mm的盲区缺陷;扇形扫查方式的有效扩散时间较全矩阵捕获方式延长0.5 ms以上;在有效扩散时间内,随着延时接收时间和时间窗宽的增加,成像质量得到提高。本研究工作为超声检测近表盲区缺陷提供了一种有效可行的新方法。      

基于幅度调制的非线性超声相控阵成像方法*

超声相控阵是超声检测领域常用的材料缺陷定位和成像技术,可便捷快速地对裂纹、孔洞等缺陷进行成像。但是,传统超声相控阵方法对较小缺陷如闭合裂纹不太敏感。非线性超声信号因对材料性能退化以及微小缺陷敏感而广受关注。本文针对疲劳闭合裂纹检测,提出一种基于幅度调制的非线性超声相控阵成像方法,通过测量物理聚焦和虚拟聚焦两种聚焦模式下超声扩散场中的声能差,并将其作为非线性参量,实现疲劳裂纹闭合部分的定位成像和定量表征。将该法应用于7075铝合金试样疲劳裂纹的实验测量,并研究了扩散场信号延迟时间对非线性超声相控阵成像结果的影响。结果表明：相较于传统超声相控阵全聚焦法,基于幅度调制的非线性超声相控阵成像方法能够更准确地定位和成像疲劳裂纹闭合部分;延迟时间的选择对疲劳裂纹长度的表征精度影响较大,本文研究了该延迟时间的选择方法并实现了检测结果的优化。     

基于分布式超声无损检测方法的零件内部缺陷检测

超声检测广泛应用于工业检测,比如超声相控阵检测法和超声A扫应用于零件内部缺陷检测。然而,这些方法可以检测出缺陷位置却很难精确地检测缺陷尺寸,缺陷定量成了急需解决并且很有意义的问题。本文提出了一种分布式超声无损检测方法,将超声探头均匀布置在检测表面,每一个超声探头可以同时发射和接收超声信号,通过对接收到的信号进行处理来重构缺陷轮廓。基于分布式超声无损检测方法,重构零件的人造缺陷并建立相应的声学仿真模型。通过多项式拟合法和聚类法分别处理实验和仿真所获得的数据并重构缺陷轮廓。实验结果和仿真结果显示重构的椭圆形缺陷和正方形缺陷具有一定的精度。结果表明分布式超声无损检测方法有潜在的应用价值和理论意义。     

超声相控阵距离幅度曲线计算方法

超声相控阵偏转聚焦声场能量分布不均匀,造成不同位置的缺陷回波幅度差异,针对该缺陷量化问题,提出超声相控阵系统距离幅度曲线理论计算方法。在非近轴近似声场模型的基础上,结合缺陷散射模型来建立相控阵系统测量模型,再利用该方法来预测不同位置横通孔缺陷的回波信号,进而获得信号幅度随位置的变化曲线。分析对比了不同偏转聚焦声束理论计算结果与实验测量结果,两者幅度在焦点附近具有较好的一致性,偏差在5%以内,验证了超声测量模型计算方法的有效性。      

相控阵测量雷达扫描特性及误差补偿方法研究

本文基于相控阵雷达波束扫描原理,分析了在扫描及跟踪状态下波束展宽对天线增益和测角精度的影响,提出了扫描跟踪角度误差补偿方法,提高相控阵雷达测量精度。     

经颅超声聚焦方法和声场特性研究

基于高分辨的CT数据建立了非均匀颅骨仿真模型,该模型引入了颅骨的声衰减系数,深入研究和分析了声波时间反转法和超声相控阵法在颅脑中的聚焦方法及效果。颅骨具有较强的声波衰减特性,使用时间反转聚焦时需要进行幅度补偿,对于0.7MHz的频率信号,幅度补偿后的时间反转聚焦声场主瓣宽度窄、旁瓣低,焦点处声场比无幅度补偿的时间反转法提高8.86dB,比超声相控阵聚焦法提高7.89dB,具有很好的空间聚焦精度和聚焦效率。研究了颅骨衰减系数、声场焦点位置、声波频率、换能器阵列位置和方位等参数对聚焦声场的影响,结果表明,幅度补偿时间反转法比相控阵法具有更低的旁瓣,且高频时的聚焦效果比相控阵好,相控阵聚焦对换能器阵列的位置和方位比较敏感,而时间反转经颅超声聚焦对声传播路径和入射角具有更高的鲁棒性。      

焊缝超声相控阵检测数据深度学习降噪方法

超声相控阵检测技术在焊缝检测中具有广泛的应用.超声相控阵检测技术检测信号中常混入噪声导致检测成像时难以分辨真实的缺陷特征.这些噪声主要为无关的反射信号和局部相关的结构噪声,传统的超声图像降噪方法难以有效滤除这些噪声,且存在计算效率低、参数优化复杂等问题.该文提出了一种基于深度学习的焊缝超声相控阵检测技术检测S扫图像的降...     

基于联合变换相关的机载航空相机像移测量

为了提高像移测量精度,针对机载航空摆扫相机提出一种坐标变换法和图像相关法相结合的像移测量方法。利用坐标变换法得到初始像移速度,利用图像联合变换相关法对像移速度残差进行补偿。联合图像通过一个面阵CCD获得,该面阵CCD放置在相机焦平面上并与成像线阵TDI CCD平行,其输出的当前图像与参考图像合并构成联合图像进行二维空间联合变换相关运算,得到像移修正矢量。对该矢量分别在相机摆扫方向和载机飞行方向进行分解,从而得到摆扫像移和前向像移的修正量。仿真实验结果表明,在输入图像信噪比为4 dB时,像移测量误差在0.1 pixel以内。     

提高基于CCD测量精度的新方法

为了提高基于CCD测量系统的测量精度,对传统的基于CCD的测量方法和测量精度进行了研究。当CCD成像平面与被测物体成一夹角α时,导出空间距离与图像像素之间的非线性关系。提出了通过标定和校准来提高基于CCD测量精度的新方法。实际结果表明,该方法可满足对大尺寸物体的高精度测量。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.