拉深新能源动力电池壳表面颈缩纹的研究

为了探明多道次拉深电池壳表面产生颈缩纹的原因及其对3003铝合金板料力学性能的影响,对3003铝合金多道次拉深进行了显微组织分析,并对其原材料3003铝合金进行力学性能、金相组织、化学成分以及原材料生产过程分析.研究结果表明:有颈缩纹缺陷的电池壳原材料的晶粒组织粗大且不均匀,其板料延伸率明显偏低.由于3003铝合金板料生产过程中退火温度过高、保温时间过长而形成的不均匀粗晶导致了多道次拉深时变形不均匀,最终表现为颈缩纹,而延伸率是影响颈缩纹形成和反映颈缩纹材料特征的参量之一.     

冲击加载下铝中孔洞长大的微观机理分析

 利用扫描电镜和透射电镜观测了冲击加载后高纯铝损伤状态孔洞的分布,发现在冲击波加载后,高纯铝中出现了大量的孔洞,孔洞大小多集中在百纳米尺度,分布不均匀,且呈现出带状形貌,局部区域的孔洞在冲击波作用下优先发展,孔洞长大,形成微米级的大孔洞。进一步的观测发现,在孔洞周围出现了大量的位错发射,发射方向位于{111}晶面上,是面心立方金属的密排面。运用分子动力学模拟进行了对比研究,验证了位错发射方向与观测结果是一致的。     

基于单孔洞近似的高纯铝部分层裂实验的数值模拟研究

基于单孔洞近似,对不同撞击速度下高纯铝的部分层裂实验进行了数值模拟研究,讨论了微孔洞长大对波传播的影响及其在自由面速度波剖面上的表现. 通过分析微孔洞周围的应力场变化,认识到实测自由面速度波剖面出现"回跳"特征并不能说明材料发生完全层裂,其直接原因是样品内部微孔洞长大所引起的局部卸载效应. 将计算得到的自由面速度波剖面和微孔洞相对体积与实验结果进行了对比分析,发现两者均符合很好,表明采用单孔洞增长来近似描述部分层裂样品中随机损伤发展及其对波传播的影响是可行的. 关键词： 层裂 孔洞增长 自由面速度波剖面 微孔洞相对体积     

一维应变层裂过程中孔洞聚集行为研究

延性金属的层裂行为包含孔洞成核、长大和聚集过程,其中孔洞聚集难以通过实验方法直接观测。采用有限元分析方法,研究了延性金属层裂过程中孔洞之间的聚集行为和竞争机制,讨论了孔洞间初始韧带距离、孔洞直径和孔洞位置分布对孔洞聚集的影响。通过实时统计孔洞长大过程中直径的变化,定量分析孔洞聚集的起始时刻。计算结果显示：当初始韧带距离由20μm增加至50μm时,相同孔径孔洞间聚集的起始时间不断延长,聚集时的直径增长加速度由1.717 Gm/s²降至0.602 Gm/s²;具有不同孔径比的孔洞之间发生聚集时,小孔优先向大孔靠拢;45°分布方式的孔洞在长大阶段的直径增长加速度最大,约为3.179 Gm/s²,且最早发生聚集。计算结果显示,在三孔聚集中,初始韧带距离和孔径相同的孔洞之间几乎同时发生聚集并贯通,且孔洞间聚集的起始时间随着初始韧带距离的增加而延长,大孔向附近小孔聚集的起始时刻较迟。计算结果揭示了层裂实验中难以观察到的孔洞长大和聚集的细观物理过程,对了解材料层裂的物理过程和本质具有重要的参考价值。     

强冲击载荷下含杂质的纯铝中微孔洞长大的动力学行为

采用LS-DYNA瞬态动力学有限元程序,对平板撞击加载下含初始杂质的纯铝样品中微孔洞的成核与长大进行了数值模拟。结果表明:微孔洞首先在杂质与基体的边界处成核,随后在局部严重塑性变形驱动下快速线性增长;微孔洞半径的增长速率与冲击加载强度两者之间近似成线性关系;材料屈服强度和初始杂质的大小对微孔洞相对的增长速率有明显的影响;当微孔洞长大阈值取屈服强度的3.5倍时,数值仿真结果与理论分析结果基本一致,这有助于进一步认识孔洞长大的动力学行为。     

冲击加载下铝中氦泡和孔洞的塑性变形特征研究

通过分子动力学模拟研究了在相同冲击加载强度下单晶铝中氦泡和孔洞的塑性变形特征,结果发现氦泡和孔洞的塌缩是由发射剪切型位错环引起的,而没有观测到棱锥型位错环发射. 氦泡和孔洞周围的位错优先成核位置基本一致,但是氦泡周围发射的位错环数目比孔洞多,位错环发射速度明显比孔洞快. 且氦泡和孔洞被冲击波先扫过部分比后扫过部分发射位错困难. 通过滑移面上的分解应力分析发现,氦泡和孔洞周围塑性特征的差别是由于氦泡内压引起最大分解应力分布改变造成的. 氦泡和孔洞被冲击波先后扫过部分塑性不对称是因为冲击波扫过时引起形状变化, 关键词： 分子动力学 冲击波 氦泡 孔洞     

冲击加载下孔洞贯通的微观机理研究

利用分子动力学方法计算模拟了沿〈100〉晶向冲击加载下单晶铜中双孔洞的贯通过程.发现孔洞周围发射剪切型位错环是孔洞塌缩和增长的原因.在拉伸阶段,孔洞首先分别独立增长,随后其周围塑性变形区开始交叠和相互作用,最后两个孔洞开始直接贯通.这种贯通模式和实验对延性材料中孔洞贯通过程的显微观察结果一致.对四种不同θ值（θ为两个孔洞中心连线与冲击加载方向之间的夹角）的模型分别进行了计算模拟,发现在相同的冲击加载强度下,θ＝0°和θ＝30°的孔洞之间没有相互贯通; 关键词： 纳米孔洞 分子动力学 冲击加载 贯通     

实现材料高应变率拉伸加载的爆炸膨胀环技术

一维的高应变率拉伸加载主要有3项实验技术——Hopkinson拉杆、电磁膨胀环和爆炸膨胀环。本课题组对传统的爆炸膨胀环实验技术进行改进,建立爆炸丝线起爆方式的新型爆炸膨胀环实验加载技术,并利用该技术开展了材料的高应变率拉伸实验,获得了较好的实验结果。     

非一维应变冲击加载下高纯铜初始层裂行为

提出了一种锥形靶层裂实验新方法,开展非一维应变冲击条件下高纯铜初始层裂行为实验研究,讨论了锥形靶内部损伤分布特征及其与自由面速度典型特征之间的内禀关系.结果显示:1)初始层裂的锥形靶内部出现了连续损伤区,损伤区扩展方向与锥面平行,从锥底到锥顶呈现了不同的损伤状态,从微孔洞独立长大到局部聚集,最后形成宏观裂纹,这种损伤状态分布特征归因于锥形靶内部拉伸应力幅值和持续时间的空间演化;2)通过锥形靶横截面损伤度定量统计分析,揭示损伤演化早期的微孔洞成核与早期长大过程是随机的,而损伤演化后期的微孔洞聚集过程具有显著的局域化特征;3)不同位置处实测的自由面法向粒子速度剖面呈现出典型的层裂Pull-back信号,但是通过与内部损伤分布特征对比,揭示基于Pull-back速度获得高纯铜层裂强度本质是微孔洞成核阈值应力,Pull-back回跳速度斜率反映了损伤演化速率,Pull-back回跳幅值与损伤度引起的应力松弛密切相关.     

钛合金低温拉伸中的多处颈缩

本报道了在国产新型超低间隙钛合金低温拉伸研究中发现的多处颈缩现象，通过多处颈缩的力学模型和透射电镜（ＴＥＭ），分析了这种金属力学现象发生的可能原因。     

Theory of dust voids in plasmas

Dusty plasmas in a gas discharge often feature a stable void, i.e., a dust-free region inside the dust cloud. This occurs under conditions relevant to both plasma processing discharges and plasma crystal experiments. The void results from a balance of the electrostatic and ion drag forces on a dust particle. The ion drag force is driven by a flow of ions outward from an ionization source and toward the surrounding dust cloud, which has a negative space charge. In equilibrium the force balance for dust particles requires that the boundary with the dust cloud be sharp, provided that the particles are cold and monodispersive. Numerical solutions of the one-dimensional nonlinear fluid equations are carried out including dust charging and dust-neutral collisions, but not ion-neutral collisions. The regions of parameter space that allow stable void equilibria are identified. There is a minimum ionization rate that can sustain a void. Spatial profiles of plasma parameters in the void are reported. In the absence of ion-neutral collisions, the ion flow enters the dust cloud's edge at Mach number M=1. Phase diagrams for expanding or contracting voids reveal a stationary point corresponding to a single stable equilibrium void size, provided the ionization rate is constant. Large voids contract and small voids expand until they attain this stationary void size. On the other hand, if the ionization rate is not constant, the void size can oscillate. Results are compared to recent laboratory and microgravity experiments.     

3D refractive index profile for the characterization of necking phenomenon along stretched polypropylene fibres

The phenomenon of neck formation in polymers has attracted considerable attention. During the cold-drawing process an initial undrawn material is transformed into anisotropic one across a narrow transition region called ‘neck’. The Video Opto-Mechanical (VOM) device attached with multiple-beam Fizeau fringes techniques are used to stretch polypropylene (PP) fibres. A iPP sample is stretched to have a neck at room temperature. The optical properties of the deformed material over the necking region are examined. Another PP sample is stretched (without necking deformation) at room temperature and the optical properties are also examined. The task of this study is to characterize and assess the necking phenomenon along cold-drawn polypropylene (iPP) fibre axis. The effect of necking on the optical properties of the fibre is confirmed by the determination of the 3D refractive index profile at different regions along the deformed PP fibre. Also the orientation function is calculated for the necked sample. The contour lines of microinterferograms are given for illustrations.     

Evolution of a dust void in a radio-frequency plasma sheath

The onset and growth of a dust void are investigated in a radio-frequency (rf) sheath of a capacitively coupled argon plasma. A circularly symmetric void emerges and grows with increasing rf power and pressure in the central region of the dust cloud levitating in the sheath. Experimental measurements of the void diameter are compared with the predictions of a simple phenomenological theory, based on a balance of forces on dust grains.     

Interaction and fragmentation of pulsed laser induced microbubbles in a narrow gap

We investigate the interaction dynamics of an existing stable microbubble B1 and another laser induced nearby expanding microbubble B2 in a thin ink sheet between two glass slices. The fast expanding B2 causes anistropic compression of B1 with a forward penetrating jet. In the subsequent expansion stage of B1, the gas associated with jet protrusion to the opposite edge of B1 and the nonuniform surrounding flow field induce necking with transverse inward jetting from the side lobes, which further interact with the axial jet and lead to the final fragmentation into smaller bubbles. At small interbubble distance, the backward interaction from B1 first leads to the pointed pole of the expanding B2 and then a backward jetting during its collapsing. The strong interaction can merge the two bubbles with complicated asymmetric intermediated patterns.     

沿〈111〉晶向冲击加载下铜中纳米孔洞增长的塑性机制研究

 用分子动力学方法计算模拟了沿〈111〉晶向冲击加载过程中，单晶铜中纳米孔洞（直径约1.3 nm）的演化及其周围区域发生塑性变形的过程。模拟结果表明，在沿〈111〉晶向冲击加载后，在面心立方（fcc）结构中的4族{111}晶面中有3族发生了滑移。伴随孔洞的增长，在所激活的3族{111}晶面上，观察到位错在孔洞表面附近区域成核，然后向外滑移，其中在剪切应力最大的〈112〉方向上，其位错速度超过横波声速，其它〈112〉方向的位错速度低于横波声速。模拟得到的位错阻尼系数范围与实验值基本符合。由于孔洞周围产生的滑移在空间比较对称，孔洞增长形貌接近球形。在恒定的冲击强度下，孔洞半径增长速率近似保持恒定，其速率随着冲击强度的增加而增大。     

A study of void size growth in nonequilibrium stochastic systems of point defects

We study properties of voids growth dynamics in a stochastic system of point defects insolids under nonequilibrium conditions (sustained irradiation). It is shown thatfluctuations of defect production rate (external noise) increase the critical void radiuscomparing to a deterministic system. An automodel regime of void size growth in astochastic system is studied in detail. Considering a homogeneous system, it is found thatexternal noise does not change the universality of the void size distribution function;the mean void size evolves according to classical nucleation theory. The noise increasesthe mean void size and spreads the void size distribution. Studying dynamics of spatiallyextended systems it was shown that vacancies remaining in a matrix phase are able toorganize into vacancy enriched domains due to an instability caused by an elastic latticedeformation. It is shown that dynamics of voids growth is defined by void sinks strengthwith void size growth exponent varying from 1/3 up to 1/2.