Blue light generation in a ridge waveguide MgO:LiNbO3 crystal pumped by a fiber Bragg grating stabilized laser diode

We report cw blue light generation by using a periodically poled MgO:LiNbO(3) crystal with a ridge waveguide pumped by a fiber Bragg grating stabilized laser diode with 0.25 nm spectrum width in the coherent collapse regime. Blue light generation of 73 mW with 27% conversion efficiency and a wide temperature tolerance of 5.7 degrees C were attained.     

Slow and fast light using fiber Bragg grating F-P cavity

In this paper, we analyzed the properties of fiber Bragg grating F-P cavity with different grating parameters at two ends. The features of transmission spectra and group velocity were investigated under different parameters including slight increase for the differences of the lengths of the two gratings, the periods of the two gratings, the refractive index modulation depths of the two gratings. The characteristics of the slow light in fiber Bragg grating and fiber Bragg grating F-P cavity were also compared. The results of this study can be useful for actual experiments and applications in using the fiber Bragg grating F-P cavity in the slow light.     

Highly reliable strain-tuning of an Erbium-doped fiber laser for the interrogation of multiplexed Bragg grating sensors

The authors implemented a tunable linear cavity Erbium-doped fiber (EDF) laser for the interrogation of multiplexed fiber Bragg grating sensors (BGS). A high-strength single-pulse draw-tower fiber Bragg grating (FBG) was used as the mechanically tunable element enabling the rapid wavelength sweeping of the laser center wavelength. A simple algorithm to process the noisy acquired data and identify the peak of the BGS spectra was employed. For the first time, this type of configuration was used to reliably interrogate at least three fiber Bragg grating sensors with a standard wavelength spacing between the Bragg wavelengths of 3 nm, without risk of breaking the stretched fiber, using an FBG with a simple PZT driven mount as the tuning elements.     

侧面抛磨极化光纤的传输特性分析

针对侧面抛磨极化光纤的物理结构，提出了极化光纤的双金属包覆六层波导模型，并对其传输特性进行了分析。分析指出，由于金属电极镀在极化光纤的侧面抛磨平面上，极化光纤中传播的光具有偏振消光特性。对极化光纤的传输特性影响较大的器件结构参量为被抛磨侧面与纤芯的距离，以及紧邻阳极的绝缘胶厚度。     

Performance characteristics of narrow linewidth fiber laser pumped mid-IR difference frequency mixing light source for methane detection.

A high-power, narrow-linewidth Yb fiber laser with a fiber Bragg grating (FBG) pumped difference frequency generation (DFG) in a periodically poled lithium niobate (PPLN) crystal was investigated in detail. A mid-IR power of approximately 2.3 microW at 3.3 micrometers with a slope efficiency of 0.85 mW/W2 was achieved. A Doppler-broadened absorption spectrum of CH4 at 3038.497 cm-1 (3.2911 micrometers) was obtained with a 0.1-m long-gas cell at a pressure of 133 Pa. The linewidth of the DFG source was evaluated to be less than 96 MHz from the observed spectral linewidth. Real-time monitoring of CH4 (approximately 1.78 ppm) in ambient air in a multipass cell which has an optical path length of 10 m was also demonstrated.     

Transmission system over 3000 km with dispersion compensated by chirped fiber Bragg gratings

The limitation of the system with dispersion compensation by chirped fiber Bragg gratings is investigated in this paper. The transmission distance of the system based on chirped fiber Bragg gratings surpasses 3000 km. The bit error rate (BER) of the system is below 10⁻⁹ for as long as 2000 km. The BER is about 10⁻⁷ at 3000 km and, when forward error correction (FEC) is added, zero BER can be achieved. It is the longest transmission system with dispersion compensation by chirped fiber Bragg gratings.     

Generation of millimeter-wave in optical pulse carrier by using an apodized Moiré fiber grating

A novel scheme is proposed to transform a Gaussian pulse to a millimeter-wave frequency modulation pulse by using an apodized Moiré fiber Bragg grating in radio-over-fiber system. The relation between the input and output pulses is analyzed theoretically by Fourier transformation method and the requirements for the proposed fiber grating are presented. An apodized Moiré fiber Bragg grating is designed and its characteristics are studied. It is shown that the proposed device is feasible, and the new scheme is believed to be an effective solution for the generation of millimeter-wave sub-carrier in future radio-over-fiber systems.     

聚合物封装的高灵敏度光纤光栅温度传感器及其低温特性

介绍了一种新型的光纤光栅温度传感器。这种光纤光栅温度传感器使用了特殊的工艺将光纤布拉格光栅封装于一种热膨胀系数较大的有机聚合物基底中 ,使得传感器的温度灵敏性比裸光纤光栅提高了 12 .3倍 ,其温度灵敏度系数KT 达到 82 .6 9× 10 -6/℃。在 - 80～ 0℃的低温度范围内 ,对这种新型光纤光栅温度传感器的反射谱进行了测量。研究了这种新型光纤光栅温度传感器的低温特性 ,并与裸光纤光栅和铝基封装的光纤光栅进行了比较 ,结果表明这种新型的光纤光栅温度传感器具有很好的低温响应特性。     

Integrated fiber Michelson interferometer based on poled hollow twin-core fiber

We propose an integrated fiber Michelson interferometer based on a poled hollow twin-core fiber. The Michelson interferometer can be used as an electro-optic modulator by thermal poling one core of the twin-core fiber and introducing second-order nonlinearity in the fiber. The proposed fiber Michelson interferometer is experimentally demonstrated under driving voltages at the frequency range of 149 to 1000 Hz. The half-wave voltage of the poled fiber is 135 V, and the effective second-order nonlinear coefficient χ2 is 1.23 pm/V.     

Variable Wavelengths Fiber Bragg Gratings Written with A Phase Mask and Four Prisms

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｓｉｎｃｅｔｈｅｆｉｂｅｒｗａｓｐｌａｃｅｄｄｉｒｅｃｔｌｙｂｅｈｉｎｄｔｈｅ ｐｈａｓｅｍａｓｋ ,ｗｈｉｃｈｗａｓｏｒｉｇｉｎａｌｌｙｄｅｍｏｎｓｔｒａｔｅｄｂｙＫ .Ｏ .Ｈｉｌｌｅｔａｌ.ｉｎ 1 993[1] ,ｔｈｉｓｍｅｔｈｏｄｈａｓｂｅｅｎｕｓｅｄｗｉｄｅｌｙｆｏｒｗｒｉｔｉｎｇｆｉｂｅｒＢｒａｇｇ ｇｒａｔｉｎｇ .Ｈｏｗｅｖｅｒ ,ｔｈｅｃｏｎｔａｃｔｔｅｃｈｎｉｑｕｅｏｆｐｈａｓｅｍａｓｋｃａｎｏｎｌｙｉｎｓｃｒｉｂｅｔｈｅｆｉｂｅｒＢｒａｇｇ ｇｒａｔｉｎｇｗｉｔｈ…     

臂内含光纤光栅的方向耦合器的理论研究

提出了臂内含有光纤光栅的方向耦合器的一般原理，推导了任意端口输入任意一端口的输出表达式，作为特例，研究了两类法布里－珀罗干谐振腔，发现它们之间存在一种交换等价关系，第一次阐述光纤光栅法布里－珀罗腔中调幅和调频的概念。     

Millimeter-wave pulse generation based on pulse reshaping using superstructure fiber Bragg grating

A novel optical approach is proposed to generate millimeter wave (MMW) pulse signal based on the pulse reshaping of superstructure fiber Bragg grating (SSFBG). In our scheme, one input pico-second Gaussian pulse is transformed into n Gaussian pulses by the SSFBG reshaping firstly, and then the pulse train is replicated to form a required frequency modulation MMW optical pulse envelope by the linear chirped fiber Bragg grating (LCFBG) or other highly dispersive element. The high-speed photodetector (PD) and band-pass filter can transform the MMW optical pulse into an MMW pulse signal ultimately. Depending on this scheme, MMW signals with frequency up to 10 GHz can be easily generated by the completed fiber components.     

高双折射光子晶体光纤中均匀布拉格光栅的特性

研究了具有高双折射的光子晶体光纤(HB PCF)中均匀布拉格光栅(FBG)的光谱特性。利用紧凑的超格子模型,对光子晶体光纤的传输特性进行分析,研究正向传输和反向传输的模式之间的耦合规律,从而研究写入光子晶体光纤中的均匀布拉格光栅的特性。首先给出具有C6v对称性的零双折射光子晶体光纤中光纤布拉格光栅的布拉格波长λB随光纤结构参量的变化规律;然后分析一种高双折射光子晶体光纤中的光纤布拉格光栅的光谱特性,高双折射使两个不同偏振态的反射峰分开较大;最后分析了一种常用的双模双折射光子晶体光纤中光纤布拉格光栅的光谱特性,LP01模和LPe11模的两个偏振态对应的反射谱都由于高双折射而分开。     

All-fiber actively Q-switched Yb-doped laser

An all-fiber actively Q-switched Yb-doped laser is presented. Q-switching is performed by modulating a fiber Bragg grating via a magnetostrictive rod which is fixed to the fiber at the position of the grating. By exposing the rod to a changing magnetic field, the rod is stretched and relaxed causing the Bragg wavelength of the grating to shift and thereby changes the Q-factor of the cavity. Using Yb-doped fiber, pulses at 1052 nm are obtained at repetition rates from 1 to 200 kHz. At 75 kHz, 0.5 μJ pulses with peak powers of 3 W can be produced when 180 mW of pump power is applied. To the knowledge of the authors, this is the first all-fiber actively Q-switched Yb-doped laser presented to date.     

Research on the air core Bragg fiber with defect state

A new method based on the Transfer Matrix Theory of Bragg fiber to research a Bragg fiber with defect state has been developed in this paper. The distribution of the electromagnetic field in the Bragg fiber is analyzed, and the loss and efficiency of the Bragg fiber are also estimated based on optical power confinement factor Γ. Thereby, the influence of the defect for transmitting characteristics in Bragg fiber has been researched.     

High frequency pulse trains from a self-starting additive pulse mode-locked all-fiber laser

In this paper, a coupled-cavity Er-doped fiber laser is experimentally developed and analyzed. The proposed scheme has the advantage of an all-fiber configuration. Two similar fiber Bragg gratings are employed as reflective components of the main cavity containing the gain medium. The second cavity is generated, in one side, by the reflective flat end of a standard fiber optic pigtail of variable length and, in the other, by one of the Bragg gratings belonging to the main cavity. Depending on the ratio between the lengths of both cavities, trains of stable and short pulses were obtained with a repetition frequency larger than the frequency of the main cavity. The repetition rate of the pulse trains experimentally obtained was as high as 780 MHz (15 times the main cavity frequency) and the pulse width was ∼110 ps. Prediction of the possible repetition rates for each cavities lengths ratio and the upgrading possibilities of this laser system are analyzed.     

Electro-optic periodically poled lithium niobate Bragg modulator as a laser Q-switch

We report an electro-optic Bragg modulator using a periodically poled lithium niobate (PPLN) crystal. We measured a half-wave voltage of 160 V when transmitting a 1064 nm laser through a 14.2 mm long, 780 microm thick, 20.13 microm period PPLN crystal at the Bragg angle. We also demonstrated a Q-switched Nd:YVO(4) laser using such a PPLN Bragg modulator as its Q-switch, producing 7.8 ns, 201 microJ pulses at a 10 kHz repetition rate when pumped by a 19.35 W diode laser at 808 nm.     

New approaches for the fabrication of photonic structures of nonlinear optical materials

We revisited two different strategies to fabricate 1D photonic crystals of nonlinear optical dielectric materials based on ultrafast laser ablation of the surface of an RbTiOPO₄ crystal, and selective etching of ferroelectric domains of the surface of a periodically poled LiNbO₄ crystal. We evaluated their behaviour as Bragg diffraction gratings. We also presented the recent advances we developed in a new procedure of fabrication of 2D and 3D photonic crystals of KTiOPO₄ (KTP) grown on the surface of a KTP substrate by liquid phase epitaxial means within the pores of a silicon macroporous template. Optical, structural, morphological, and compositional characterization for the photonic crystals produced through this technique are presented.     

用于光纤布拉格光栅法布里-珀罗腔的改进的Rouard算法

比较了光纤布拉格光栅法布里一珀罗腔的极限法、平衡法及传输矩阵法3种算法,证明了它们是一致的,指出了光纤布拉格光栅复振幅传输矩阵的相移特性对法布里一珀罗腔透射率的影响.对计算任意折射率调制的光纤布拉格光栅的Rouard算法进行了改进,在分层方法中考虑了折射率分布初始相位的影响,获得了更为准确的反射复振幅相位特性,将该结果应用于计算光纤布拉格光栅法布里一珀罗腔,得到了光纤布拉格光栅法布里一珀罗腔具有多峰结构的透射谱,并经过实验验证了该理论的正确性.     

基于悬臂梁的光纤光栅无啁啾线性调谐

设计了一种均质,等厚,等腰三角状悬臂梁,调节该梁自由端的挠度,实现了光纤光栅布拉格反射中心波长的线性无啁啾调谐（调谐范围４．５０ｎｍ）引入修正因子η＝０．７１后,理论值与实验结果基本一致,光栅与梁间刚性粘贴的质量影响反射谱形状。