Sr3Bi（PO4）3：Eu^2＋ Luminescence,Concentration Quenching and Crystallographic Sites

A blue emitting phosphor Sr3Bi（PO4）3：Eu2＋ is synthesized luminescent property is investigated. Sr3Bi（PO4 ）3 ：Eu^2＋ can by a high-temperature solid state method, and its create blue emission under the 332 radiation excitation, and the prominent luminescence in blue （423nm） due to the 4fSd^1→4f^7 transition of the Eu^2＋ ion. The crystallographic sites of the Eu^2＋ ion in Sr3Bi（PO4）3 are analyzed, and the 420 and 440 nm emission peaks of the Eu^2＋ ion are assigned to the nine-coordination and eight-coordination, respectively. The emission intensity of Sr3Bi（PO4）3：Eu^2＋ is influenced by the Eu^2＋ doping content, and the concentration quenching effect is observed. The quenching mechanism is the dipole-dipole interaction, and the critical distance of energy transfer is calculated by the concentration quenching method to be approximately 1.72nm.     

Effect of Precursor Molar Ratio of [S^2-]/[Zn^2＋] on Particle Size and Photoluminescence of ZnS：Mn^2＋ Nanocrystals

We investigate the influence of precursor molar ratio of [S^2-]/[Zn^2＋] on particle size and photoluminescence （PL） of ZnS：Mn^2＋ nanocrystMs. By changing the [S^2-]/[Zn^2＋] ratio from 0.6 （Zn-rich） to 2.0 （S-rich）, the particle size increases from nearly 2. 7nm to about 4.Ohm. The increase in the ratio of [S^2-]/[Zn^2＋] cadses a decrease of PL emission intensity of ZnS host while a distinct increase of Mn^2＋ emission. The maximum intensity for the luminescence of Mn^2＋ emission is observed at the ratio of [S^2-]/[Zn^2＋] ≈ 1.5. The possible mechanism for the results is discussed by filling of S^2- vacancies and the increase of Mn^2＋ ions incorporated into ZnS lattices.     

Photoluminescence characteristics and energy transfer between Bi~（3＋） and Eu~（3＋） in Na_2O–CaO–GeO_2–SiO_2 glass

We report the photoluminescence（PL） of Eu^3＋-doped glass with Bi^3＋as a sensitizer. The specific glass system with the strong enhancement of the red emission of Eu3＋is obtained by adding a small number of Bi3＋ions instead of increasing the Eu^3＋ concentration. The emission band of Bi3＋overlaps with the excitation band of Eu^3＋ and the lifetime decay curves,resulting in a very efficient energy transfer from Bi^3＋ to Eu^3＋. The probability of energy transfer is strongly dependent on Bi^3＋ concentration. In addition, the intensity of 4f–4f transition is much stronger than that of a charge-transfer（CT） band in the excitation spectrum, which indicates that the Na2O–Ca O–Ge O2-Si O2 glass is a suitable red-emitting phosphor with high stability as a candidate for light-emitting diodes（LEDs）.     

Luminescence Spectra of YGG：RE^3＋, Bi^3＋ （RE = Eu and Tb） and Energy Transfer from Bi^3＋ to RE^3＋

We investigate the luminescence properties of Bi^3＋ and RE^3＋ （RE = Tb or Eu） in a Y3Ga5O12 （YGG） host system. The additional doping of Bi^3＋ can enhance the luminescence of Th^3＋ or Eu^3＋ in this host. Energy transfer from Bi^3＋ to Tb^3＋ and Eu^3＋ is observed and the mechanism of energy transfer is investigated. Mechanism of energy transfer can be explained as electric multipole interaction since the Bi^3＋ emission band and Tb^3＋ or Eu^3＋ excitation band overlaps and the Bi^3＋ emission intensity decreases while the intensity of Tb^3＋ or Eu^3＋ increases with the increase of Tb^3＋ or Eu^3＋ concentration. Therefore, Bi^3＋ ion is a kind of efficient sensitizer to the Tb^3＋ and Eu^3＋ activators in the Y3Ga5O12 host.     

Preparation and Luminescence Characteristics of Ca3Y2（BO3）4：Eu^3＋ Phosphor

Ca3Y2 （BO3）4：Eu^3＋ phosphor is synthesized by high temperature solid-state reaction method, and the Iuminescence characteristics are investigated. The emission spectrum exhibits two strong red emissions at 613 and 621 nm corresponding to the electric dipole ^5 Do- ^7F2 transition of Eu^3＋ under 365 nm excitation, the reason is that Eu^3＋ substituting for Y^3＋ occupies the non-centrosymmetric position in the crystal structure of Ca3 Y2 （BO3）4. The excitation spectrum for 613 nm indicates that the phosphor can be effectively excited by ultraviolet （UV） （254 nm, 365nm and 400nm） and blue （470nm） light. The effect of Eu^3＋ concentration on the emission intensity of Ca3 Y2 （BO3）4 ：Eu^3＋ phosphor is measured, the result shows that the emission intensities increase with increasing Eu^3＋ concentration, then decrease. The CIE colour coordinates of Ca3Y2 （BO3）4：Eu^3＋ phosphor is （0.639, 0.357） at 15mol% Eu^3＋.     

Luminescence Spectra of SrA112O19：Pr^3＋, Mn^2＋ under VUV-UV Excitation

Luminescence spectra of SrAl12O19：Pr^3＋,Mn^2＋ under VUV-UV excitation are investigated. The characteristic emissions between 4f levels and the excitation of 5d for Pr^3＋ are observed. The emission of Mn^3＋ peaks at 517nm and the excitations clue to the ground to multiplets are observed at 276, 360, 386 and 426nm. However, the spectral overlap between the emission of Pr^3＋ and excitation of Mn^2＋ is absent, suggesting that the quantum splitting cannot be achieved via a Pr^3＋ Mn^2＋ ion pair in the host SrAl12O19.     

Energy Transfer from Ce^3＋ to Eu^2＋ in LiSrBO3 and Its Potential Application in UV-LED-Based White LEDs

Ce3＋/Eu2＋ codoped LiSrBO3 phosphor is synthesized, and its luminescent characteristics are investigated. LiSrBO3：Ce3＋,Eu2＋ phosphor exhibits varied hues from blue to white and eventually to yellow by resonance-type energy transfer from Ce3＋ ion to Eu2＋ ion and tuning the relative proportion of Ce3＋/Eu2＋ properly. Energy transfer mechanism in LiSrBOa：Ce3＋, Eu2＋ phosphor is dominated by the dipole-dipole interaction, and the critical distance of the energy transfer is estimated to be about 2 nm by both spectral overlap and concentration quenching methods. Under UV radiation, white light is generated by coupling 436 and 565nm emission bands attributed to Ce3＋ and Eu2＋ radiations, respectively.     

A novel strong green phosphor： K3Gd（PO4）2：Ce^3＋, Tb^3＋ for a UV-excited white light-emitting-diode

A series of K3Gd1-x-y（PO4）2：xCe^3＋, yTb^3＋ phosphors are synthesized by the solid-sate reaction method. X-ray diffraction and photoluminescence spectra are utilized to characterize the structures and luminescence properties of the as-synthesized phosphors. Co-doping of Ce^3＋ enhances the emission intensity of Tb^3＋ greatly through an efficient energy transfer process from Ce^3＋ to Tb^3＋. The energy transfer is confirmed by photoluminescence spectra and decay time curves analysis. The efficiency and mechanism of energy transfer are investigated carefully. Moreover, due to the non- concentration quenching property of K3Tb（PO4）2, the photoluminescence spectra of K3Tb1-x（PO4）2：xCe^3＋ are studied and the results show that when x = 0.11 the strongest Tb^3＋ green emission can be realized.     

Energy transfer relation of a novel Ce3＋/Pr3＋/Eu3＋ co-doped Sr2.975-xLaxAIO4＋xF1-x solid solution phosphor

The photoluminescence properties and energy transfer of a new Ce3＋/pr3＋/Eu3＋ co-doped solid-solution composi- tion of Sr2.975-xLaxAlO4＋xF1-x （LSAF） phosphor are investigated. Upon doping Pr3＋ into lattices of LSAF：Ce host, a shoulder emission peak is observed at about 620 nm, owing to the transition of 1D2 →3H4. Addition of Eu3＋ to LSAF：Ce3＋, Pr3＋ phosphor results in a sharp emission peaked at 675 nm for the 5D0 →TF3 transition and an increase of the intensity of red emission for Pr3＋ with increasing Eu3＋ concentration. The pathways of energy transfer among Ce3＋, Pr3＋, and Eu3＋ are proposed to be responsible for color addition of a red component to the primary yellow emission, enabling a potential adjustable color for blue excitable warm white.     

Microwave-promoted pure host phase for red emission CaS：Eu2＋ phosphor from single CaSO4 precursor and the photoluminescence property

We report a novel approach to obtaining a classical blue-green excitable CaS：Eu2＋ phosphor with desired red emission by microwave （MW） firing procedure in the absence of adding elemental sulphur. The disturbing effect of MW electro- magnetic field on decomposition of CaSO4 into CaS activated by europium is distinctly observed to give pure host phase without adding any elemental sulphur and carbon. The host phase evolution is observed to be highly dependent on the variation of applied MW power from X-ray diffraction （XRD） patterns and the corresponding photoluminescence （PL）, and a maximum PL intensity at 1100 W of MW power is acquired for the obtained purer host phase. The non-thermal and non-equilibrium effects by MW are revealed to correlate with the interaction between polar structure of the host and applied electromagnetic field. The results demonstrate an optional procedure to prepare this red-emitting phosphor in an effective, environment-friendly and scalable approach for phosphor production in the application of bio-illumination for plant cultivation and artificial photosynthesis.     

Photoassociation Reactions H＋D^＋ and H^＋ ＋D in Ultrashort Pulse Laser Fields

The photoassociation reactions H＋D^＋ and H＋ ＋D induced by the one- and two-colour laser pulses are theoretically studied. The reactions occur through two channels： （i） H（1S）＋D^＋ →HD^＋, and （ii） H^＋ ＋D（1S）→HD^＋. The reaction probability through channel （ii） is higher than through channel （i）. The populations of the products H^＋ ＋D and HD＋ and the ratio of H^＋ ＋D to HD＋ can be controlled by laser pulses. The two-colour laser pulses can more efficiently lower the dissociation probability and therefore enhance the yield ratio of the product HD＋.     

Cooperative Quantum Cutting of Nano-Crystalline BaF2：Tb^3＋, Yb^3＋ in Oxyfluoride Glass Ceramics

We report on cooperative quantum cutting in Tb^3＋- Yb^3＋ codoped glass ceramics. Precipitation of BaF2 nanocrystals is confirmed by XRD and HRTEM analysis. Near-infrared emission due to transition of Yb^3＋ ions under 485 nm excitation indicates cooperative energy transfer from Tb^3＋ to Yb^3＋. The quantum efficiency of this process reaches 145%. The realization of quantum cutting in glass ceramics may have promising applications in solar cells.     

Relativistic Energies and Auger Widths of High-Lying Doubly-Excited States 1s^23lnl′ ^1De in Be-Like O^4＋ Ions

The saddle-point variational method and restricted variational method are used to calculate energies of doublyexcited singlet states 1s^23lnl′ （n =3-.） ^1 De in Be-like O^4＋ ions, including the mass polarization and relativistic corrections. The saddle-point complex-rotation method is used to compute the Auger widths and Auger transition rates. These results are compared with other theoretical and experimental data in the literature.     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

Ab Initio Calculations of Differential Cross Sections for Single Charge Transfer in ^3He^2＋ ＋ ^4He Collisions

The single charge transfer process in ^3He^2＋ ＋ ^4He collisions is investigated using the quantum-mechanical molecular- orbital close-coupling method, in which the adiabatic potentials and radial couplings are calculated by using the ab initio multireference single- and double-excitation configuration interaction methods. The differential cross sections for the single charge transfer are presented at the laboratorial energies E = 6 keV and lOkeV for the projectile ^3He^2＋. Comparison with the existing data shows that the present results are better in agreement with the experimental measurements than other calculations in the dominant small angle scattering, which is attributed to the accurate calculations of the adiabatic potentials and the radial couplings.     

Characteristics of Cladding-Pumped Short Er3+/Yb3+ Codoped Single Mode Phosphate Glass Fibre

We experimentally investigate the laser characteristics of a series of short pieces of newly-developed Er³⁺/Yb³⁺ codoped single mode phosphate glass fibres via the cladding pump of a 976nm multimode laser diode. A stablecontinuous-wave single transverse mode laser with over 85mW at 1553nm is generated from a 5.5-cm-long active fibre. Single mode laser output power per unit length is up to 15mW/cm. Moreover, the slope efficiency is 11.8% when the pump power is below 940mW and the 3dB linewidth is 0.06nm at the maximum pump power. The numerical simulation results show that the laser emission slope efficiency can exceed 20% by means of increasing the coupling efficiency of the pump to the fibre core further.     

Interaction of O3+ Ions with Al2O3 Nanocapillaries

We investigate angular distributions of the transmitted 60 keV and 120 keV O^3＋ ions through nanocapillaries with 50hm diameter and 10μm length. The experimental results are in agreement with the ＇guiding effect＇ found by Stolterfoht et al. For different tilted angles of the nanocapillary membrane with respect to the beam, the angular distributions of the transmitted ions are measured by a one-dimensional micro-channel plate （MCP） detector. Moreover, the dependence of this guiding effect on the projectile energy is studied.     

Effects of Yb^3＋ in Er^3＋/Yb^3＋ Codoped Fluorophosphate Glasses

For the Er^3＋ /Yb^3＋ codoped fluorophosphate glasses, Judd-Ofelt theory is used to analyse the influence of YbF3 as not a sensitizer but an average component on the spectroscopic properties around 1530nm emission. The double roles of Yb^3＋, as a sensitizer and as an average component, are discussed. It is found that Yb^3＋ as an average component contributes to the increase of fluorescence lifetime, and Yb^3＋ as a sensitizer has the best sensitization when its concentration is 2.4 mol%.