顾客搜索强度影响下短生命周期产品订货决策

根据短生命周期产品的特点,考虑与需求相关的顾客搜索强度,在假设溢出需求为顾客搜索强度函数的情况下,建立了考虑顾客搜索强度因素的斜坡型需求模型,分两种情形对模型最优解进行了存在性证明和求解.然后通过数值算例分析了主要参数变化对缺货时间、订货量、库存成本的影响,发现订货量与顾客搜索强度同方向变动,缺货时间与需求变化临界点出现先后的不同,缺货成本、持有成本和变质成本对库存总成本的影响不同.     

需求离散的变质性物品库存补充策略优化研究

研究了在不允许缺货情况下需求为离散的变质性物品的库存补充策略问题.在假定变质率为常数的情况下,建立了有限时域内变质性物品的补充策略模型,并给出了求最优补充策略的方法.     

库存系统中的时滞变质物品的EOQ模型

本文考虑时段性变质物品的库存问题 .给出了一订货就交货 ,不允许缺货的时滞变质物品的库存模型与最优库存策略 ,并证明了该模型不是那物品自始至终有变质性质的 EOQ模型的简单叠加 .     

库存系统中的时滞变质物品的EOQ模型

本考虑时段性变质物品的库存问题。给出了一订货就交货,不允许缺货的时滞变质物品的库存模型与最优库存策略,并证明了该模型不是那物品自始至终有变质性质的EOQ模型的简单叠加。     

存货影响销售率的无形变质物品库存控制模型

为解决存储过程中价值易发生贬值的一类无形变质物品最优订货问题,建立了一种存货影响销售率的无形变质物品库存控制模型.针对零售商期初订货批量的不同水平,以库存总成本最小为优化目标,分别求得了无形变质物品库存总成本函数.鉴于这些函数中的主要部分属于超越函数,函数性质不易探明,最优解难以直接求得.为此,从严格的数学证明出发,深入探讨了函数最优解的存在性和惟一性,为进一步研究提供了理论基础.最后,通过数值算例,系统分析了模型参数对库存总成本、期初订货批量和库存更新周期的影响,并结合实际对其结果的合理性进行了解释说明.     

销售率线性依赖瞬时库存水平的两货栈决策模型

在成熟期的存货影响销售环境下,考虑销售率线性依赖瞬时库存水平,不允许缺货,研究了一类非变质性物品的两货栈库存决策问题.建立了以系统平均总利润最大为目标的决策模型,分析了系统最优库存策略的存在性和唯一性,并给出了求解模型的有效方法.分析结果表明,库存管理者利用租用货栈进行订货决策时,除了要充分考虑企业自身的库存容量外,还取决于自有货栈产品相关参数对库存系统绩效的边际贡献率.     

需求率基于库存的变质物品的两货栈模型

针对需求受库存水平影响的变质品的两货栈系统,本文首先考虑了允许缺货但缺货要补情形下,分别给出了L₁系统(库存系统只用自己的货栈存放物品)和L₂系统(库存系统使用自己货栈和租用货栈存放物品)时,销售商的库存和运输策略模型。其次给出了允许缺货但缺货不补L₁系统和L₂系统时,销售商的库存和运输策略,并对模型最优解作了相关分析,最后给出算例,给销售商实际的库存管理提供了理论依据。     

需求率依赖于库存水平的离散性库存费的库存模型

传统的库存控制模型都视需求率为固定不变的,放松了这个假定,通过考虑库存费为存储时间的阶梯函数的情形:(1)全单位库存费用,(2)增量库存费用,并且在需求率依赖于库存水平,当库存水平下降到一定程度时,需求率变为常数的形式下,把变化的订购费引入,发展了两个离散性库存费的变质物品的库存控制模型。在模型中允许周期末库存水平不为零,并且提出了最优解的算法。     

随机需求下具有有效期的易变质物品的库存管理

本本文研究了无限时间具有有效期的易变质物品的(T,r,Q)的库存补货策略.在市场需求率随机,允许缺货且设定最大缺货量的条件下,建立了一个确定易变质物品最优补货策略的优化模型,并采用缺货回补的办法,利用多元极值和隐函数定理的思想得到了最优补货批量和订货点.在最后的算例中,通过Matlab软件模拟出最优补货批量和最优缺货量,并对模型的参数作了灵敏性分析.     

带有可变库存费用和短缺的变质性物品的经济批量模型

传统的经济批量模型通常都假定物品的库存费用是固定不变的.放松了这个假定,通过考虑库存费用的两种可能变化情形即(A)库存费的变化率为存储时间的函数;(B)库存费的变化率为库存量的函数,并在需求线性依赖于库存水平的形式下,发展了两个变库存费的变质性物品的经济批量模型.在模型中允许短缺发生且假定短缺完全拖后,理论上证明了模型具有唯一的整体最优解,揭示了库存费的变化对库存系统最优订货策略的影响.     

A collaborative inventory system with permissible delay in payment for deteriorating items

A collaborative inventory system of single vendor and single buyer is developed to maximize the total profit of the whole system. However, the optimal solution for the whole system is not always beneficial to both players. To ensure mutual benefit, a negotiation factor is incorporated to share the profit between the two players according to their contributions. The permissible delay in payment is a win–win strategy for sharing profit in the collaborative system. A deteriorating inventory model with finite replenishment rate and price sensitive demand is assumed to occur in a high-tech, short life cycle and perishable electronic product. A numerical example is provided to illustrate our models. The sensitivity analysis of the demand rate, replenishment rate, deterioration factor, and other related parameters shows that the percentage extra total profit is significant when both the collaboration strategy and the deterioration factor are considered.     

On an EOQ model for deteriorating items with time-varying demand and partial backlogging

For seasonal products, fashionable commodities and high-tech products with a short product life cycle, the willingness of a customer to wait for backlogging during a shortage period is diminishing with the length of waiting time. Recently, Chang and Dye developed an inventory model in which the backlogging rate declines as the waiting time increases. In this paper, we complement the shortcoming of their model by adding the non-constant purchase cost into the model. In addition, we show that the total cost is a convex function of the number of replenishments. We further simplify the search process by providing an intuitively good starting value, which reduces the computational complexity significantly. Finally, we characterize the influences of the demand patterns over the replenishment cycles and others.     

Optimal selling price and lotsize with time varying deterioration and partial backlogging

The article deals with an EOQ (economic order quantity) model over an infinite time horizon for perishable items where demand is price dependent and partial backorder is permitted. The rate of deterioration is taken to be time proportional and it is assumed that shortage occurs at starting of the inventory cycle. Based on the partial backlogging and lost sale cases, the author develops the criterion for the optimal solution for the replenishment schedule, and proves the optimal ordering policy is unique. Moreover, the article suggests to new functions regarding price-dependent demand and time varying deterioration rate. Finally, numerical examples are illustrated to test the model in various issues.     

Determining a common production cycle time for an economic lot scheduling problem with deteriorating items

This paper considers the economic lot scheduling problem (ELSP) for a production-inventory system where items produced are subject to continuous deterioration. The problem is to schedule multiple products to be manufactured on a single machine repetitively over an infinite planning horizon. Each product is assumed to have a significant rate of deterioration. Only one product can be manufactured at a time. The demand rate for each product is constant, but an exponential distribution is used to represent the distribution of the time to deterioration. A common cycle time policy is assumed in the production process. A near optimal production cycle time is derived under conditions of continuous review, deterministic demand, and no shortage.     

回收率依赖回收产品质量的再制造EOQ模型

研究回收率依赖回收产品质量情况下制造/再制造混合系统的EOQ模型.该模型假设顾客的需求可通过新产品的制造和回收产品的再制造两种方式满足,且这两种产品无质量差异;需求率是确定的、连续的;总成本包括制造和再制造的固定启动成本,可销售产品和回收品的库存成本,以及缺货成本.当假设缺货成本无限大时给出不允许缺货情况下的模型.给出算例验证模型的有效性.     

Optimal production stopping and restarting times for an EOQ model with deteriorating items

A perishable single item production-inventory system is studied in this paper. The objective is to describe a general model in which the production rate, the product demand rate, and the item deterioration rate are all considered as functions of time, and to discuss the optimal production stopping and restarting times which minimise the total relevant cost per unit time. In the general model, demand shortage is allowed, where some of the demand is lost and the rest is backlogged. Popular models, such as the pure inventory system and the zero shortage system, are shown to be special cases of our model. The conditions for a feasible stationary point to be optimal are given. The simplest cases with constant rates of production, demand and deterioration are discussed and shown as illustrative examples.     

An economic production quantity inventory model involving fuzzy demand rate and fuzzy deterioration rate

Generally, in deriving the solution of economic production quantity (EPQ) inventory model, we consider the demand rate and deterioration rate as constant quantity. But in case of real life problems, the demand rate and deterioration rate are not actually constant but slightly disturbed from their original crisp value. The motivation of this paper is to consider a more realistic EPQ inventory model with finite production rate, fuzzy demand rate and fuzzy deterioration rate. The effect of the loss in production quantity due to faulty/old machine have also been taken into consideration. The methodology to obtain the optimum value of the fuzzy total cost is derived and a numerical example is used to illustrate the computation procedure. A sensitivity analysis is also carried out to get the sensitiveness of the tolarance of different input parameters.     

Optimal replenishment policy for product with season pattern demand

This paper investigates a deterministic inventory model in which demand follows a seasonal pattern that repeats itself after a short time interval. An algorithm is developed for determining an optimal replenishment cycle, a shortage length and an order quantity such that the total profit per unit time is maximized.     

周期与季节性因素影响下的短生命周期产品预测优化模型

短生命周期产品因为需求的随机性和产品价值的瞬间变化性,对预测准确性提出了更高的要求.然而许多企业在使用多种预测模型后发现其预测准确率并没有得到显著提升.以短生命周期产品需求特点为背景,在需求预测影响的BASS模型基础上,建立受生命周期和季节性因素影响的需求预测优化模型,最后通过一个产品的实例证实了验证了模型的合理性.     

Partial backlogging inventory lot-size models for deteriorating items with fluctuating demand under inflation

In this paper, the traditional inventory lot-size model is extended to allow not only for general partial backlogging rate but also for inflation. The assumptions of equal cycle length and constant shortage length imposed in the model developed by Moon et al. [Moon, I., Giri, B.C., Ko, B., 2005. Economic order quantity models for ameliorating/deteriorating items under inflation and time discounting, European Journal of Operational Research 162(3), 773–785] are also relaxed. For any given number of replenishment cycles the existence of a unique optimal replenishment schedule is proved and further the convexity of the total cost function of the inventory system in the number of replenishments is established. The theoretical results here amend those in Yang et al. [Yang, H.L., Teng, J.T., Chern, M.S., 2001. Deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand, Naval Research Logistics 48(2), 144–158] and provide the solution to those two counterexamples by Skouri and Papachristos [Skouri, K., Papachristos, S., 2002. Note on “deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand” by Yang et al. Naval Research Logistics 49(5), 527–529.]. Finally we propose an algorithm to find the solution, and obtain some managerial results by using sensitivity analyses.