带有可变库存费的变质性物品的部分延期供给的库存控制模型

传统的库存控制模型都视需求率为常数,在这篇文章中,放松了这个假定,研究了库存费的两种可能的变化:(i)库存费的变化率为存储时间的函数;(ii)库存费的变化率为库存量的函数.在模型中允许短缺发生且假定短缺部分延期供给,且在需求率线性依赖于库存水平的情形下,发展了两个变库存费的库存控制模型.     

需求率依赖于库存水平的离散性库存费的库存模型

传统的库存控制模型都视需求率为固定不变的,放松了这个假定,通过考虑库存费为存储时间的阶梯函数的情形:(1)全单位库存费用,(2)增量库存费用,并且在需求率依赖于库存水平,当库存水平下降到一定程度时,需求率变为常数的形式下,把变化的订购费引入,发展了两个离散性库存费的变质物品的库存控制模型。在模型中允许周期末库存水平不为零,并且提出了最优解的算法。     

变库存费的变质性物品的最优订货策略

经典的 EOQ模型所解决的问题都是视库存费为常数 ,在这篇文章中 ,我们研究了库存费的二种可能的变化 :(A)库存费的变化率为存贮时间的函数 ;(B)库存费的变化率为库存量的函数 .揭示了变库存费对库存系统最优订货策略的影响     

存货影响销售率的无形变质物品库存控制模型

为解决存储过程中价值易发生贬值的一类无形变质物品最优订货问题,建立了一种存货影响销售率的无形变质物品库存控制模型.针对零售商期初订货批量的不同水平,以库存总成本最小为优化目标,分别求得了无形变质物品库存总成本函数.鉴于这些函数中的主要部分属于超越函数,函数性质不易探明,最优解难以直接求得.为此,从严格的数学证明出发,深入探讨了函数最优解的存在性和惟一性,为进一步研究提供了理论基础.最后,通过数值算例,系统分析了模型参数对库存总成本、期初订货批量和库存更新周期的影响,并结合实际对其结果的合理性进行了解释说明.     

一类最优EOQ模型的进一步扩展

对一类经济批量订购模型作如下进一步扩展:第一,允许短缺,短缺量部分拖后供给,且短缺期间损失率与实际缺货量成正比;第二,订购费用是可变的,且线性依赖于订购量.在此假定下,研究了有限计划时间水平及常数变质率下,部分短缺量拖后的变质性物品多阶段库存问题,给出了寻找最优订购策略的算法,证明了所给最优策略的存在唯一性及在该策略下费用函数取得最小值.最后给出应用实例.     

考虑事故风险损失的爆炸物品经济订货批量模型研究

爆炸物品在储存过程中存在发生爆炸事故,从而给人类和环境带来伤害的可能,因此在对爆炸物品进行采购决策时必需考虑由此带来的风险损失.在给出爆炸物品事故风险损失度量方法的基础上,建立了爆炸物品的经济订货批量模型,证明了模型存在唯一最优解,并给出了模型的求解步骤,为相关企业合理制定采购决策提供了理论依据.数字算例分析了事故概率、赔偿标准、单位库存费、单次采购费对最优批量的影响,比较了考虑事故风险损失与否时的最优批量,结果表明,当事故概率或赔偿标准较高时,两者对应的最优批量差异明显.这也说明,当事故概率或赔偿标准达到一定程度时,考虑事故风险损失是十分必要的.     

折扣支付部分拖后供给量的易变质物品经济批量模型

在假定备运期间费用函数为备运时间一般函数的前提下,将备运期和折扣率作为决策变量,建立了折扣支付部分拖后供给量的易变质物品经济批量模型,给出了寻求最优备运期、最优折扣率及最优订购周期的简单方法,并给出了参数的灵敏度分析和应用实例.     

库存理论(二)

2.5有常数损耗率的库存模型 许多库存物品会有损耗,本模型讨论最简单的有常数损耗率的情形,这里在基本模型的假定下还假定 h)存货有常数损耗率μ。 用I(t)记订货后时刻t的未损耗的库存水平,0≤t相似文献   

医院医疗器械—麻醉包库存策略

麻醉包对于医院来说是一种重要的医疗物品,具有需求量大,一旦缺货则损失严重等特点,为此研究了黑龙江省某医院麻醉包的库存问题.以存储费用为标准来评价和优选库存策略,共建立了四大库存模型,分别是经济批量EOQ库存模型;需求离散条件下多周期有准备成本库存模型;需求服从正态分布条件下多周期有准备成本库存模型和蒙特卡罗仿真库存控制模型.其中,三个模型得出了结果,通过证明,一个模型不符合医院实际情况.通过比较上述三个模型求得的最优化库存策略与医院实际使用的库存策略,建议采取蒙特卡罗仿真库存控制模型求解得出的结果作为医院方最优库存策略.     

带短期价格折扣和允许两次特殊补货的库存决策模型

针对供应商提供短期价格折扣且允许零售商两次特殊补货的库存系统, 建立了以零售商库存效益最大化为目标的库存决策模型, 分析了模型的性质, 根据经济订单批量补货决策下补货时间点与折扣时段的关系, 确定了零售商在不同补货策略下的库存效益增值函数. 据此给出零售商相应的最优补货策略函数表达式, 提出了该模型的一个全局优化算法, 并通过数值算例验证了模型和算法的有效性与可行性.     

Profitability ratio maximization in an inventory model with stock-dependent demand rate and non-linear holding cost

This paper studies a deterministic inventory model with a stock-dependent demand pattern where the cumulative holding cost is a non-linear function of both time and stock level. When the monetary resources are limited and the inventory manager can invest his/her money in buying different products, it seems reasonable to select the ones that provide a higher profitability. Thus, a new approach with the aim of maximizing the profitability ratio (defined as the profit/cost quotient) is considered in this paper. We prove that the profitability ratio maximization is equivalent to minimizing the inventory cost per unit of an item. The optimal policy is obtained in a closed form, whose general expression is a generalization of the classical EOQ formula for inventory models with a stock-dependent demand rate and a non-linear holding cost. This optimal solution is different from the other policies proposed for the problems of minimum cost or maximum profit per unit time. A complete sensitivity analysis of the optimal solution with respect to all the parameters of the model is developed. Finally, numerical examples are solved to illustrate the theoretical results and the solution methodology.     

Partial backlogging inventory lot-size models for deteriorating items with fluctuating demand under inflation

In this paper, the traditional inventory lot-size model is extended to allow not only for general partial backlogging rate but also for inflation. The assumptions of equal cycle length and constant shortage length imposed in the model developed by Moon et al. [Moon, I., Giri, B.C., Ko, B., 2005. Economic order quantity models for ameliorating/deteriorating items under inflation and time discounting, European Journal of Operational Research 162(3), 773–785] are also relaxed. For any given number of replenishment cycles the existence of a unique optimal replenishment schedule is proved and further the convexity of the total cost function of the inventory system in the number of replenishments is established. The theoretical results here amend those in Yang et al. [Yang, H.L., Teng, J.T., Chern, M.S., 2001. Deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand, Naval Research Logistics 48(2), 144–158] and provide the solution to those two counterexamples by Skouri and Papachristos [Skouri, K., Papachristos, S., 2002. Note on “deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand” by Yang et al. Naval Research Logistics 49(5), 527–529.]. Finally we propose an algorithm to find the solution, and obtain some managerial results by using sensitivity analyses.     

An integrated inventory model under conditions of order processing cost reduction and permissible delay in payments

This article develops an integrated inventory model to determine the optimal policy under conditions of order processing cost reduction and permissible delay in payments. Both the vendor and the buyer participate in order processing cost reduction by applying information technologies. The order processing cost can be reduced by certain expenditures and will affect lot-size decisions. Simultaneously, the existence of the credit period serves to reduce the cost of holding stock to the buyer, because it reduces the amount of capital invested in stock for the duration of the credit period. The article derives the total cost function and shows that the function possesses some kinds of convexities. A solution procedure is provided to determine the optimal order policy. Finally, numerical examples are presented to illustrate the solution procedure.     

Joint replenishment model with substitution

When products are coupled to the same cycle, the joint replenishment model (JRM) is used to determine optimal inventory levels, where the amount to order (for each item) is designed to minimize the joint holding and ordering costs based on a given demand. JRM studies assume that there is no substitution between items. However, this assumption is unrealistic in some settings where substitution cannot be ignored. This paper combines the separate works on substitution and joint replenishment and proposes a solution procedure for solving the joint replenishment model with substitution (JRMS) for two products within the framework of the classical economic order quantity model. We determine the optimal order quantities for each product taking into consideration substitution between them so that demand is partially met and the total cost associated with the delivery, holding, and shortage of the products is minimized. We also provide an extensive scenario analysis and draw insights. In particular, we shed some light on the role of substitution in reducing the fixed cost. We show that JRMS can result in substantial cost savings compared to the ordinary JRM.     

An inventory model of deteriorating items with lot-size dependent replenishment cost and a linear trend in demand

This paper presents an inventory model for deteriorating items over a finite time horizon where the demand increases linearly with time. The method is developed by assuming that the successive replenishment cycle lengths are the same. Many O.R. scientists/researchers obtained an optimal replenishment schedule where the replenishment cost is constant in each cycle length over the finite time horizon. In this paper, we relax the assumption of fixed replenishment cost. The replenishment cost per replenishment is taken to be linearly dependent on the lot-size of that replenishment. Shortages are allowed and are fully backlogged. As a special case, the results for the model without shortages are derived. Finally, two numerical examples are presented to illustrate the model.     

带有可变备运期和有限服务率的经济批量模型

本文将备运期（Lead time)作为决定变量，在指数备运时间－费用函数的假定下，建立了服务率为有限的库存系统的最优经济批量模型，提供了寻求最佳备运期、最优订货周期及最优订货批量的简单方法，并给出了参数的灵敏度分析和应用实例。