大变形对称弹性理论的广义变分原理

本文以陈至达提出的变形几何非线性理论￣［１］为基础，应用Ｌａｇｒａｎｇｅ乘子法，对大变形对称弹性力学问题进行了研究，给出了相应的位能广义变分原理、余能广义变分原理，以及动力学问题的广义变分原理；同时，文中还证明了位能广义变分原理和余能广义变分原理的等价性。     

电动力学电磁场边值问题的广义变分原理

给出了线性各项异性电磁场边值问题的广义虚功原理表达式,运用钱伟长教授提出的方法建立了该问题的广义变分原理,可直接反映该问题的全部特征,即4个Maxwell方程、2个场强-位势方程、2个本构方程和8个边界条件．继而导出了一族有先决条件的广义变分原理．作为例证,导出了两个退化形式的广义变分原理,和已知的广义变分原理等价．此外还导出了两个修正的广义变分原理,可为该问题提供杂交有限元模型．建立的各广义变分原理可为电磁场边值问题的有限元应用提供更为完善的理论基础．     

建立广义变分原理的一种方法

本文建议了一种根据问题的力学意义来建立广义变分原理的方法,本方法对于那些尚未建立起与之相应的变分原理的问题建立其相应的变分原理是有用的.文中不从最小势能原理的推广出发而从力学意义出发导出了弹性力学中的Hu-Washizu广义变分原理和胡海昌广义余能原理,给出了这两个广义变分原理的正确证明.本文并证明了,如果根据Hu-Washizu广义变分原理及胡海昌广义余能原理中含有σ_ij,e_ij和u_i三类变量,就认为这三类变量相互独立,就会导致错误.文中并阐明了这两个广义变分原理正确运用的条件.     

凑合反推法和弹性理论中的多变量广义变分原理

详细介绍了如何应用凑合反推法(semi-inverse method)构造弹性理论中的两类独立变量的广义变分原理(包括熟知的Hellinger-Reissner变分原理,Hu-Washizu变分原理)及三类独立变量的广义变分原理(钱伟长广义变分原理) 。应用凑合反推法还可以清楚地看出各变量之间的约束关系,从而再一次证明了Hu-Washizu变分原理实际上是两类独立变量的广义变分原理。     

粘性流体力学的变分原理和广义变分原理

本文建立了不可压缩和可压缩粘性流体力学问题的变分原理,即最大功率消耗原理和它们的广义变分原理.     

非线性弹性体的弹性动力学变分原理

本文根据文献[1],对非线性应力应变关系的弹性体,导出了弹性动力学问题的变分原理和广义变分原理,提出了混合位移协调元和混合应力协调元的瞬时广义变分原理.     

一般力学中三类变量的广义变分原理

应用对合变换,将两类变量的广义变分原理的驻值条件变换为三类变量的基本方程.按照广义力和广义位移之间的对应关系,将各基本方程乘上相应的虚量,代数相加,然后积分,进而建立了完整系统的三类变量的广义变分原理.应用这种凑合法,建立了非完整系统的三类变量的广义变分原理.作为例子,将一般力学中的三类变量的广义变分原理和两类变量的广义变分原理推广应用于弹性动力学中.最后,讨论了有关的问题.     

再论Hellinger-Reissner原理与Hu-Washizu原理之等价性

阐述了Hu-Washizu变分原理实际上是一个赝广义变分原理,即虽然其驻值条件满足所有的场方程及边界条件,但它存在某种约束.为了清楚说明问题,本文构造一些新的赝广义变分原理,用逆拉氏乘子法可以清楚地看出其约束关系,并进一步证明了Hu-Washizu变分原理和Helinger-Reisner变分原理之等价定理.     

更一般的杂交广义变分原理及有限元模型

本文根据钱伟长教授提出的更一般的广义变分原理,给出了适用于有限元法中的更广义杂交变分原理,并由此建立了新的广义杂交模理. 进一步以变厚度薄板弯曲单元为例,对基于各种不同的广义变分原理建立的各种杂交元做了比较.     

应用Lagrange乘子法推导一般力学中的广义变分原理 *

应用对合变换建立了两类变量的经典变分原理———Hamilton原理 .灵活应用Lagrange乘子法 ,建立了完整系统和非完整系统的两类变量的广义变分原理和带有附加条件的广义变分原理 .推导了各类变分原理的驻值条件.     

扩散速度与组元的质量守恒方程*

在混合物流动中,某组元i的质量迁移速度(绝对速度)等于对流速度(牵连速度)与扩散速度(相对速度)之和.扩散速度——以及扩散系数——依对流速度取法之不同而不同.     

Fully-developed free-convective flow of micropolar and viscous fluids in a vertical channel

The problem of fully-developed laminar free-convection flow in a vertical channel is studied analytically with one region filled with micropolar fluid and the other region with a viscous fluid. Using the boundary and interface conditions proposed by previous investigators, analytical expressions for linear velocity, micro-rotation velocity and temperature have been obtained. Numerical results are presented graphically for the distribution of velocity, micro-rotation velocity and temperature fields for varying physical parameters such as the ratio of Grashof number to Reynolds number, viscosity ratio, width ratio, conductivity ratio and micropolar fluid material parameter. It is found that the effect of the micropolar fluid material parameter suppress the velocity whereas it enhances the micro-rotation velocity. The effect of the ratio of Grashof number to Reynolds number is found to enhance both the linear velocity and the micro-rotation velocity. The effects of the width ratio and the conductivity ratio are found to enhance the temperature distribution.     

Analytical solutions of laminar swirl decay in a straight pipe

In this work, the laminar swirl flow in a straight pipe is revisited and solved analytically by using prescribed axial flow velocity profiles. Based on two axial velocity profiles, namely a slug flow and a developed parabolic velocity profiles, the swirl velocity equation is solved by the separation of variable technique for a rather general inlet swirl velocity distribution, which includes a forced vortex in the core and a free vortex near the wall. The solutions are expressed by the Bessel function for the slug flow and by the generalized Laguerre function for the developed parabolic velocity. Numerical examples are calculated and plotted for different combinations of influential parameters. The effects of the Reynolds number, the pipe axial distance, and the inlet swirl profiles on the swirl velocity distribution and the swirl decay are analyzed. The current results offer analytical equations to estimate the decay rate and the outlet swirl intensity and velocity distribution for the design of swirl flow devices.     

基于离散速度的层控地震速度模型分析

地波速度大小主要取决于通过介质,在构造起伏严重的地区,通过井点准确时深标定确定离散速度,基于井点准确的速度资料由地震反射层位控制空间速度模型,通过实例分析确定了此种时深转化方法的可行性.     

粘弹性运动带动力响应分析

基于Kelvin粘弹性材料本构模型及带运动方程,建立了运动带非线性动力学分析模型.基于该模型和Lie群分析方法推导了匀速运动及简谐运动带线性问题的解析解;基于该非线性模型的数值仿真讨论了运动带材料参数、带稳态运动速度、扰动速度对系统动态响应的影响.结果表明:1)当带匀速运动时,无论系统是线性还是非线性,运动带横向振动"频率"都随着带运动稳态速度增加而减小.2)随着材料粘性增加,系统耗散能力逐渐增强,动态响应逐渐减小.3)当带运动速度简谐波动时,系统动态响应随扰动速度增大而增大.扰动频率对带横向振动影响较大.     

Flocking dynamics for a multiagent system involving task strategy

Collective behavior sometimes requires forming a particular formation or reaching a certain velocity to accomplish a specific task, such as bird migration. In this paper, we investigate the collective migration model, which consists of two parts: Cucker–Smale type interaction and target velocity. Each agent has a strategy to allocate limited energy to group interaction and velocity tracking. In this case, if the system achieves monocluster flocking then the final velocity is equal to target velocity. When the strategy is invariant, we show that 1/2 is a critical threshold which is consistent with the classical Cucker–Smale model. When the strategy is time varying, we provide a time-varying strategy named threshold strategy to ensure that for any initial state the system achieves monocluster flocking and the final velocity reaches target velocity. In addition, the case of multiple target velocities is considered. According to the theory of bicluster flocking, we obtain a sufficient framework to guarantee that the system achieves bicluster flocking and two groups would reach their target velocities, respectively.     

Effect of sliding velocity on area of real contact and on force of friction in high-elastic materials

The velocity dependence of the force of friction and the area of real contact of SKN-18, SKN-26, and SKN-40 rubbers has been simultaneously determined on an optical instrument. In the region of small sliding velocities the area of real contact is virtually independent of the sliding velocity, while the force of friction increases in proportion to the logarithm of the sliding velocity, in accordance with the molecular-kinetic theory of friction. At high sliding velocities a deviation in the velocity dependences of both quantities is observed. The constant of friction has been determined over the entire velocity range and the resulting velocity dependence is examined in molecular terms.Mekhanika Polimerov, Vol. 3, No. 2, pp. 309–311, 1967     

通过有漏孔管道时的层流解析解

研究了通过有漏孔管道时的层流,并解析地求解了动量方程和能量守恒方程．由Hagen-Poiseuille的速度分布,同时定义轴向和径向速度分量的未知函数,得到了压力和质量输运方程,并根据不同的参数,画出其分布图．结果表明,管道中的轴向速度、径向速度、质量输运参数和压力,随着流体沿管道的流动而减小．     

Unsteady flow past a flat plate with suction

A solution is given for the transient response for laminar boundary layer flow past a flat plate to a step-function change in suction velocity. An arbitrary but constant suction velocity normal to the plate is allowed prior to step-change. Using the Laplace transform technique the solutions for the unsteady velocity profile and shear stress are obtained and are graphically sketched when the suction velocity doubles in the stepchange. The results show clear evidence of boundary-layer contraction when suction velocity is increased.     

川渝裂缝性地层自动压井环空多相压力波速特性研究北大核心CSCD

考虑虚拟质量力、环空沿程压力、气液相间阻力、气体滑脱、环空空隙率等因素,基于小扰动理论,提出了裂缝性地层自动压井环空多相压力波速数学模型,结合半显式差分方法,以彭州PZ-5-3D井(垂深5827 m)为实例,对模型编程求解.结果表明:裂缝性地层出气具有段塞流特点,随空隙率增大,压力波速呈现先减小后增大趋势;空隙率在0%至16%区间,压力波速以液弹为主,压力波速呈急剧下降趋势;空隙率在16%至40%区间,压力波速趋于平缓恒定值;空隙率在42%至100%区间,压力波速呈现增大趋势,压力波速以气弹为主;随环空井深减小,环空空隙率减小,压力波速整体呈现减小趋势;随压井循环排气井口回压增大,压力波速整体呈现增大趋势;环空空隙率在0%至13%区间内,气体滑脱速度对压力波速影响不大;环空空隙率在13%至85%区间内,随气体滑脱速度增大,压力波速呈现减小趋势;节流阀调阀时间间隔与井底压力响应时间具有跟随性,随井底压力响应时间增大,调阀时间间隔增大.