Numerical study of the transverse supersonic flow of a diatomic rarefied gas past a plate

The two-dimensional supersonic rarefied gas flow past an infinite plate placed normally to the flow is analyzed. The gas possesses rotational degrees of freedom. The problem is stated for a model kinetic equation and is solved by applying a second-order accurate implicit conservative finite-difference method. The gas parameters correspond to nitrogen. The results are compared with those obtained for a monatomic gas. The influence exerted by the rotational degrees of freedom and the boundary conditions at the plate’s surface on the aerodynamic characteristics of the plate and the flow pattern is illustrated.     

Comparing branch-and-price algorithms for the Multi-Commodity k-splittable Maximum Flow Problem

The Multi-Commodity k-splittable Maximum Flow Problem consists in routing as much flow as possible through a capacitated network such that each commodity uses at most k paths and the capacities are satisfied. The problem appears in telecommunications, specifically when considering Multi-Protocol Label Switching. The problem has previously been solved to optimality through branch-and-price. In this paper we propose two exact solution methods both based on an alternative decomposition. The two methods differ in their branching strategy. The first method, which branches on forbidden edge sequences, shows some performance difficulty due to large search trees. The second method, which branches on forbidden and forced edge sequences, demonstrates much better performance. The latter also outperforms a leading exact solution method from the literature. Furthermore, a heuristic algorithm is presented. The heuristic is fast and yields good solution values.     

谐和与有界噪声联合参激作用下的Visco-Elastic系统

研究了带visco-elastic项的非线性系统,在谐和与有界噪声联合参激作用下的响应和稳定性问题。用多尺度法分离了系统的快变项,并求出了系统的最大Liapunov指数和稳态概率密度函数,根据最大Liapunov指数可得系统解稳定的充分必要条件。讨论了系统的visco-elastic项对系统阻尼项和刚度项的贡献,给出了随机项和确定性参激强度等参数对系统响应影响的讨论。数值模拟表明该方法是有效的。     

线性分布载荷作用下功能梯度各向异性悬臂梁的解析解

对功能梯度各向异性弹性悬臂梁在线性分布载荷作用下的弯曲问题进行了研究．从平面应力问题的基本方程出发,假定应力函数为梁长度方向的多项式形式,由应力函数求导给出应力,利用协调方程和边界条件可完全确定应力函数．将解析解与有限元数值方法的结果进行了对比,两者吻合良好．     

无形资源投入差距与经济发展水平差距关系的研究——基于江苏省的实证

投入要素可以分为有形资源、无形资源和人力资源,进一步可以将无形资源分为信息资源、技术进步、制度与管理因素.文章以江苏省为例,采用鸿沟系数及面板数据分析了要素投入差距与经济发展水平差距之间的关系,认为江苏省经济发展水平的地区差距正在缓慢拉大,资本投入的地区差距拉大是主要原因,技术进步的地区差距轻微拉大对经济发展水平差距拉大的作用较小,劳动力投入的地区差距对经济发展水平差距没有影响,而信息资源投入的地区差距缩小对经济发展水平地区差距缩小有显著的贡献.     

Exact solution of thermal stress problem of an inhomogeneous hygrothermal piezoelectric hollow cylinder

The closed-form exact solution for the hygrothermal response of inhomogeneous piezoelectric hollow cylinders is obtained. The interaction of electric potentials, electric displacement and elastic deformations is presented. The present cylinder is subjected to both a mechanical load and an electric potential. The material properties coefficients of the present cylinder are assumed to be changed in the radial direction by different distribution forms. The field quantities like displacement, stresses and electric potentials in the inhomogeneous piezoelectric cylinders are determined. The significant of influences of material inhomogeneity, initial temperature, final moisture, and the load and electric ratios in the field quantities are investigated. The concluding remarks and suitable discussions are made.     

Laplace方程有孔椭圆区域边值问题的解析解

本文利用相似流动替换方法 ,解决了中心有圆孔的椭园形区域上 Laplace方程第一类边值问题 ;采用分区域解法 ,给出了中心有椭园孔的椭园形区域上 Laplace方程第一类边值问题的解析通解 .这一结果在许多工程领域有重要应用 ,本文给出了油藏工程实例     

Analysis of Elastomeric Composites Based on Fiber Systems. 4. 3D Composites

The elastic properties of 3D elastomeric composite materials under large deformations are considered. The investigation is based on the structural macroscopic theory of stiff and soft composites. The results of micro- and macromechanical analyses of composite materials with compressible and poorly compressible matrices are presented. The character of interaction between the fibers of various reinforcing systems in these matrices is revealed. The deformation characteristics of the composites in tension and shear are presented as functions of their orientation and loading parameters. The evolution of the configuration of a composite material with a compressible matrix during loading is traced.     

Maximum Likelihood Estimation of Hidden Markov Multivariate Normal Distribution Parameters

Hidden Markov model is widely used in statistical modeling of time, space and state transition data. The definition of hidden Markov multivariate normal distribution is given. The principle of using cluster analysis to determine the hidden state of observed variables is introduced. The maximum likelihood estimator of the unknown parameters in the model is derived. The simulated observation data set is used to test the estimation effect and stability of the method. The characteristic is simple classical statistical inference such as cluster analysis and maximum likelihood estimation. The method solves the parameter estimation problem of complex statistical models.     

Optimal control of the solidification process in metal casting

The optimal control of the solidification process in metal casting is considered. The mathematical model is based on a three-dimensional two-phase initial-boundary value problem of the Stefan type. The mathematical formulation of the optimal control problem is given. The problem is solved numerically by direct optimization methods. The numerical results are described and analyzed. Some of the results are illustrated by plots.     

Theoretical model of laminar flow in tubes in rolling motion

The theoretical model of laminar flow in tubes in rolling motion is established. The velocity and temperature correlations are derived, and the frictional resistance coefficient and Nusselt number are also obtained. The oscillation of parameters is induced by the tangential force due to rolling motion. The effect of centrifugal and Coriolis forces on the flow is negligible. The tangential force does not effect on the average parameters. The oscillating amplitude of Nusselt number increase with the Prandtl number increasing. Both the oscillating amplitudes of frictional resistance coefficient and Nusselt number increase with the rolling frequency increasing.     

关于建立玉米叶片的数学模型的几种方法的讨论

分别运用拉格朗日插值法、最小二乘的三次多项式拟合法和经典三次样条插值法建立了玉米叶片的数学模型,并从收敛性、稳定性、光滑性等方面对三种方法进行了对比分析,通过对所给实例的绘图效果进行比较,指出了拉格朗日插值法、最小二乘的三次多项式拟合法和经典三次样条插值法在描述玉米叶片形态特征的效能上的利弊.     

一类微生物种群生态数学模型的Hopf分支

讨论了一类具有二阶生长速率的微生物菌群生态数学模型。运用常微分方程空间定性理论的手法,在四维相空间中对该模型进行了深入讨论,判定了平衡点的类型及稳定性,分析了正平衡点的存在及成为O+吸引子的条件。最后讨论了系统小扰动下产生Hopf分支的问题。     

Influence of thermophoretic diffusion of nanoparticles with Joule heating in flow of Maxwell nanofluid

The aspects of activation energy in magnetized Maxwell nanofluid flow with Brownian movement and thermophoretic diffusion have been elaborated here. Furthermore, Joule heating, variable conductivity and chemical reaction are scrutinized. The Buongiorno nanofluid thought is ratify to incorporate the importance of thermophoretic and Brownian diffusion. The attained ODEs have been solved via homotopic algorithm. The performance of operational variables is inspected. The Maxwell temperature field for Eckert number and variable conductivity factor have similar trend. The fluid concentration exaggerates for activation energy and decelerates for Brownian motion parameter. Furthermore, the brilliant outcomes attained and associated with possible existing prose accurately.     

Explicit Stability Zones for Cournot Game with 3 and 4 Competitors

The dynamical system of 3 and 4 competitors in a Cournot game is studied. The stability of its fixed points (Nash-equilibria) are also investigated. The stable and unstable regions are explicitly shown. The bifurcation characteristics are found. Periodic orbits with different periods 7, 25, 18, 13, 17 etc., are detected in both cases. The study of these models is very rich in bifurcation phenomena.     

自由表面与粘性尾迹的相互作用

解析地研究了无限深不可压粘性流体中运动物体产生层流尾迹与自由表面波的相互作用．以定常的Oseen方程模拟受扰流动,对于小振幅自由表面波则采用线性化的运动学和动力学边界条件．在数学描述上,运动物体以Oseen极子模拟,受扰流场分解成表述粘性尾迹的无界奇异Oseen流和描述自由面效应的有界正则Oseen流之和．通过积分变换法,得到自由表面波的精确解．借助Lighthill的两步格式,导出了自由面波高带有附加校正项的渐近解．所得对称解显示了波动的振幅因粘性和潜深的存在而呈指数衰减．     

虚拟解法分析浸入边界法的精度

浸入边界法是对流固耦合系统进行建模和模拟的有效工具,在生物力学领域的应用尤为广泛．该文的工作主要包含两个部分:程序验证和精度分析．前者证明了程序的正确性,后者给出了浸入边界法的精度．两部分工作均使用虚拟解法作为研究工具．在程序验证部分,使用二阶空间离散格式进行数值计算,通过分析各种变量的离散误差,得到的程序计算精度阶是二阶,与理论精度阶一致,证明了数值计算所使用程序的正确性．精度分析部分工作在此基础上展开．引入压强跳跃,在动量方程中加入相应源项,通过分析带有源项的控制方程中各物理量的离散误差,证明浸入边界法只具有一阶精度．同时可以得出以下结论:粗网格无法敏感地捕捉浸入边界的影响;当Euler网格固定时,增加Lagrange标志点的数目并不会改善计算误差．     

基于改进BP算法的镁锂合金流变应力预测模型

通过一种镁锂合金在Gleeble3500热模拟机进行的热压缩实验数据进行训练,模型能较准确地预测该材料的流变应力,误差低于5%.改进算法避免了标准BP网络易陷入局部最小以及收敛速度慢的缺点,得到了更高的精度以及训练速度.预报模型准确度及可靠性高,具有工程应用价值.     

Multiple level finite element analysis and its applications to tidal current flow in Tokyo Bay

A finite element method for the analysis of a one level and a multiple level current flow is presented. The basic equations can be derived from the three-dimensional Navier-Stokes equations under the shallow water assumptions. The standard finite element method has been introduced using the linear interpolation function based on a triangular finite element. For each level, the finite element subdivisions are not required to be coincident. To integrate the discretized equations numerically in time, an improved two step explicit scheme is employed. The multiple level finite element method is applied to a tidal flow analysis of Tokyo Bay.The multiple level tidal flow analysis is performed at the entrance channel of Tokyo Bay. The density of water is assumed to be constant for each level. The vertical profiles of the numerical velocity are compared with those of the observed velocity. The flow directions and the order of velocity are both well in agreement with the observed data. The tidal flow pattern in Tokyo Bay has been shown to be expressed by the multiple level flow assuming that the density of seawater is levelwise constant.The numerical tidal flow computation of Tokyo Bay carried out using a one level model is compared with observed data. The one level numerical values will be used to specify the boundary conditions for the multiple level analysis. Both numerical and observed results correspond extremely well in this computation. The two dominant circulated residual flows have been computed, and they coincide with the observed facts.     

Nonlinear models of suspension bridges

Nonlinear variational equations describing one type of suspension bridges are proposed and studied. The variational equations describe the behaviour of road bed, main cables and cable stays. The road bed is described by two functions connected with vertical and horizontal deformation of any cross section. The main cable is considered to be perfectly flexible and inextensible. The cable stays only resist tensile forces. The variational equations are derived from the principle of minimum potential energy. The existence of solution is based on the Brouwer Fixed Point Theorem. The local uniqueness and continuous dependence on the data represented by gravitational forces acting on the road bed are studied. The local results are based on the Implicit Function Theorem for Banach spaces. A certain stability criterion for suspension bridges is formulated and this criterion indicates how to influence the stability of suspension bridges.