THE STRUCTURE OF EIGENVALUE REGIONS FOR A TWO-DELAY DIFFERENTIAL SYSTEM WITH A TWIN-PARAMETER

This paper is concerned with positive solutions and the structure of eigenva- lue regions for a two-delay singular differential system with a twin-parameter.     

A FRACTIONAL NONLINEAR EVOLUTIONARY DELAY SYSTEM DRIVEN BY A HEMI-VARIATIONAL INEQUALITY IN BANACH SPACES

This article deals with a new fractional nonlinear delay evolution system driven by a hemi-variational inequality in a Banach space.Utilizing the KKM theorem,a result concerned with the upper semicontinuity and measurability of the solution set of a hemivariational inequality is established.By using a fixed point theorem for a condensing setvalued map,the nonemptiness and compactness of the set of mild solutions are also obtained for such a system under mild conditions.Finally,an example is presented to illustrate our main results.     

LIMIT CYCLES OF A QUADRATIC HAMILTONIAN SYSTEM BY CUBIC PERTURBATIONS

In this paper,we are concerned with a cubic near-Hamiltonian system,whose unperturbed system is quadratic and has a symmetric homoclinic loop.By using the method developed in [12],we find that the system can have 4 limit cycles with 3 of them being near the homoclinic loop.Further,we give a condition under which there exist 4 limit cycles.     

STUDY ON A THREE DIMENSIONAL CHAOTIC SYSTEM

In this letter a new chaotic system is discussed. Some basic dynamic properties, such as symmetry, dissipation, continuous spectrum and chaotic behaviors of the butterfly attractor are studied. Furthermore, period-doubling bifurcations in a system with definite parameters has been investigated.     

A CLASS OF QUADRATIC DIFFERENTIAL SYSTEM WITH A THIRD ORDER WEAK FOCUS

This paper discusses the uniqueness of the limit cycle of quadratic differential system with a third order weak focus.     

RELIABILITY ANALYSIS FOR A REPAIRABLE PARALLEL SYSTEM WITH TIME-VARYING FAILURE RATES

To solve a real problem :how to calculate the reliability of a system with time-varying failure rates in industry systems,this paper studies a model for the load-sharing parallel system with time-varying failure rates,and obtains calculating formulas of reliability and availability of the system by solving differential equations. In this paper, the failure rates are expressed in polynomial configuration. The constant,linear and Weibull failure rate are in their special form. The polynomial failure rates provide flexibility in modeling the practical time-varying failure rates.     

A Note on A Coupled Reaction-diffusion System with Time Delays

Abstract The global stability of the steady-state solution to a coupledreaction-diffusion system with time delays is investigated. All factors involvedin the system, especially, the permeabilites and diffusion are taken into account,and the relevant results of the papers〔1,2〕 are thus improved.     

THE POINCAR BIFURCATION OF A CUBIC HAMILTONIAN SYSTEM WITH HOMOCLINIC LOOP

In this paper, we discuss the Poincare bifurcation of a cubic Hamiltonian system with homoclinic loop. We prove that the system can generate at most seven limit cycles after a small perturbation of general cubic polynomials.     

GLOBAL EXPONENTIAL STABILITY TO A CLASS OF DIFFERENTIAL SYSTEM WITH DELAY

The global exponential stability of the zero solution to a class of differential system with delay is considered.By constructing a suitable type of Lyapunov functional and using some analytical techniques,we derive some criteria to check exponential stability of this system.The results establish a relation between the delay time and the parameters of the system.Two examples are also given to illustrate the validity of the results.     

一阶捕食-被捕食系统的单调方法

本文利用单调逼近方法,研究带大小结构的捕食-被捕食系统的初边值问题,得到了系统解的存在唯一性,并且证明了序列是线性收敛的.     

A fuzzy random forest

When individual classifiers are combined appropriately, a statistically significant increase in classification accuracy is usually obtained. Multiple classifier systems are the result of combining several individual classifiers. Following Breiman’s methodology, in this paper a multiple classifier system based on a “forest” of fuzzy decision trees, i.e., a fuzzy random forest, is proposed. This approach combines the robustness of multiple classifier systems, the power of the randomness to increase the diversity of the trees, and the flexibility of fuzzy logic and fuzzy sets for imperfect data management. Various combination methods to obtain the final decision of the multiple classifier system are proposed and compared. Some of them are weighted combination methods which make a weighting of the decisions of the different elements of the multiple classifier system (leaves or trees). A comparative study with several datasets is made to show the efficiency of the proposed multiple classifier system and the various combination methods. The proposed multiple classifier system exhibits a good accuracy classification, comparable to that of the best classifiers when tested with conventional data sets. However, unlike other classifiers, the proposed classifier provides a similar accuracy when tested with imperfect datasets (with missing and fuzzy values) and with datasets with noise.     

一类边界控制半线性抛物型系统的逼近能控性

本文考虑一类Ｄｉｒｉｃｈｌｅｔ型边界控制半线性抛物型系统，应用半群理论和非线性分析的方法，证明了系统解映射的连续性，给出了系统逼近能控的一个充分条件．对于Ｎｅｕｍａｎｎ型边界控制或混合型边界控制的半线性抛物型系统，可以得到类似的结果．     

A construction of unitary linear systems

A construction is made of a unitary linear system whose transfer function is a given power seriesB(z) with operator coefficients such that multiplication byB(z) is an everywhere defined transformation in the space of square summable power series with vector coefficients. A condition is also given for the existence of an observable linear system with such a transfer function. For both constructions properties of the spaces are given which imply essential uniqueness of linear systems with given transfer functions. A canonical conjugate-isometric linear system is uniquely determined by its transfer function whenever the state space is a Pontryagin space.     

A transverse spinning double pendulum

A transverse spinning double pendulum is introduced. This pendulum is of interest as a simple mechanical system with two degrees of freedom with rotation which is autonomous. In addition to having physical origins, the pendulum is constructable for experimental observation. Our main interest in introducing and analyzing this system is that it is the simplest physical system with the codimension two singularity – in the linearization about the trivial solution – associated with coalescence of four zero eigenvalues. It is the dynamics of the nonlinear system in the neighbourhood of this singularity that is of interest. We study this problem using normal form theory. An algorithm for the Cushman–Sanders normal form is constructed and analyzed. A representative model for the truncated normal form is presented. This truncated normal form has seven parameters; it is not integrable in general and it is predicted that the dynamics associated with this model will be quite complex.     

A Simple Criterion for Involutivity

A simple criterion for the involutivity of a system of partialdifferential equations of polynomial type is proved. The criterioninvolves the equations themselves and does not require the systemto be in orthonomic form. It is proved that a system of partialdifferential equations is involutive if it is a differentialGröbner basis with respect to a total degree ordering,and if the compatibility conditions of the symbol equationsof the system consist of equations of degree one. An algorithmfor calculating these compatibility conditions is given.     

方差分析在复杂测量系统能力分析中的应用

测量系统分析是QS9000标准中的核心要素之一,主要用来评估测量系统对工序质量改进的保证程度。传统的测量系统能力分析主要采用极差分析或方差分析研究单台测量仪器组成的二因素交叉型简单测量系统,本文从企业的实际情况出发,采用方差分析法研究包含多台测量仪器的复杂测量系统,基于三因素套析因混合效应实验模型的方差分析和方差估计,提出了这种测量系统能力分析的方法,并给出了应用实例。     

A paired queueing system arising in multimedia synchronization

One of the most important and distinguishing features of multimedia applications is the integration of multiple media streams that have to be presented in a synchronized fashion. In this paper, a queueing system with a special service mechanism arising in multimedia synchronization is considered. The system is characterized by arrival of two types of customers (media streams), and servicing of customers (processing of packets) in pairs with one customer from each type for a pair. The exact transient system size probabilities are obtained as the stationary solutions do not exist for this system and these are illustrated numerically. The density function of the first return to the origin for the queueing system is also obtained.     

A stochastic recirculation system with random access

A model for a stochastic recirculation system with randomly accessed multiple heterogeneous servers, no waiting rooms, and exponentially-distributed service times is provided. In this system the units are assigned to one of the servers upon arrival by random mechanism. Units which find all servers busy recirculate and combine with the incoming arrivals and join those already in the system to initiate the next cycle. The equilibrium behavior of the internal and external stochastic processes of the system is analyzed using a two parameter approximation. A simulation model is also developed and its behavior is compared against the analytical model at the steady state. The model with randomly-accessed servers is compared to a single server model already established in the literature. The performance of the model is then examined for a wide range of parameter values to obtain conclusions about its optimal performances.     

A Riemann solver for RANS

An exact expression for a system of both eigenvalues and right/left eigenvectors of a Jacobian matrix for a convective two-equation differential closure RANS operator split along a curvilinear coordinate is derived. It is shown by examples of numerical modeling of supersonic flows over a flat plate and a compression corner with separation that application of the exact system of eigenvalues and eigenvectors to the Roe approach for approximate solution of the Riemann problem gives rise to an increase in the convergence rate, better stability and higher accuracy of a steady-state solution in comparison with those in the case of an approximate system.