Euler型梁-柱结构的非线性稳定性和后屈曲分析

在有限变形的假设下,建立了位于非线性弹性基础上非线性弹性Euler型梁-柱结构的广义Hamilton变分原理,并由此导出了任意变截面Euler型梁-柱结构的3维非线性数学模型,其中考虑了转动惯性、几何非线性、材料非线性等因素的影响．作为模型的应用,分析了弹性基础上一端完全固支另一端部分固支,并受轴力作用的均质等截面线性弹性Euler型梁的非线性稳定性和后屈曲;结合打靶法和Newton法,给出了一种计算平凡解(前屈曲状态)、分叉点(临界载荷)和分叉解(后屈曲状态)的数值方法,对前两个分支点和相应分支解,成功地实现了数值计算,并考虑了基础反力和惯性矩对分支点的影响．     

变截面二维功能梯度微梁的振动和屈曲特性北大核心CSCD

基于修正的偶应力理论和Timoshenko梁理论,应用变分原理建立了变截面二维功能梯度微梁的自由振动和屈曲力学模型.模型中包含金属组分和陶瓷组分的材料内禀特征尺度参数,可以预测微梁力学行为的尺度效应.采用Ritz法给出了任意边界条件下微梁振动频率和临界屈曲载荷的数值解.数值算例表明:微梁厚度减小时,无量纲一阶频率和无量纲临界屈曲载荷增大,尺度效应增强.锥度比对微梁一阶频率的影响与边界条件密切相关,同时,对应厚度和对应宽度锥度比的影响也有明显差异.变截面微尺度梁无量纲一阶频率随着陶瓷和金属的材料内禀特征尺度参数比的增加而增大,且不同边界条件时增大程度不同.厚度方向和轴向功能梯度指数对微梁的一阶频率和屈曲载荷也有显著的影响.     

基于修正偶应力理论的Timoshenko微梁模型和尺寸效应研究

基于修正偶应力理论,将Timoshenko微梁的应力、偶应力、应变、曲率等基本变量,描述为位移分量偏导数的表达式.根据最小势能原理,推导了决定Timoshenko微梁位移场的位移场控微分方程.利用级数法求解了任意载荷作用下Timoshenko简支微梁的位移场控微分方程,得到了反映尺寸效应的挠度、转角及应力的偶应力理论解.通过对承受余弦分布载荷Timoshenko简支微梁的数值计算,研究了Timoshenko微梁的挠度、转角和应力的尺寸效应,分析了Poisson比对Timoshenko微梁力学行为及其尺寸效应的影响.结果表明:当截面高度与材料特征长度的比值小于5时,Timoshenko微梁的刚度和强度均随着截面高度的减小而显著提高,表现出明显的尺寸效应;当截面高度与材料特征长度的比值大于10时,Timoshenko微梁的刚度与强度均趋于稳定,尺寸效应可以忽略;材料Poisson比是影响Timoshenko微梁力学行为及尺寸效应的重要因素,Poisson比越大Timoshenko微梁刚度和强度的尺寸效应越显著.该文建立的Timoshenko微梁模型,能有效描述Timoshenko微梁的力学行为及尺寸效应,可为微电子机械系统（MEMS）中的微结构设计与分析提供理论基础和技术参考.     

矩形截面梁中波传播的精确分析

将傅立叶级数方法推广应用于矩形截面梁中波传播的精确分析．不仅试着直接从三维弹性动力学方程出发,导出了矩形截面梁中波传播的一般解析解,而且给出了弹性波在自由矩形截面梁中的传播特性．波传播精确模型的提出,为实现梁波的耦合控制奠定了坚实基础．     

双层0.618法在某力学问题中的应用

建立了一组平行移动荷载作用下,简支桥梁挠度的数学模型;利用双层0.618法搜索梁的绝对最大挠度对应的最危险截面位置以及移动荷载最不利位置,计算该位置相应的挠度得到梁的绝对最大挠度.本文算法以计算机为工具,适用于任意有限多个平行移动荷载,对于桥梁的设计计算与安全评估,有一定的实用价值.     

变刚度复杂梁结构损伤检测方法研究

提出了适用于复杂梁结构损伤检测的子段模态应变能法SSEM(subsectionstrainenergymethod),并分析了该方法的适用性条件．通过对变截面梁的有限元计算,以及对纤维增强复合材料风机叶片缩比模型的试验分析,验证了SSEM方法确定的结构损伤指标对损伤准确定位的可靠性．该基于振动的变刚度复杂梁结构的损伤检测方法,可应用于工程实际中梁和类梁整体结构的损伤检测．     

准三维功能梯度微梁的尺度效应模型及微分求积有限元

基于修正的偶应力理论与四参数高阶剪切-法向伸缩变形理论,提出了一种具有尺度依赖性的准三维功能梯度微梁模型,并应用于小尺度功能梯度梁的静力弯曲和自由振动分析中.采用第二类Lagrange方程,推导了微梁的运动微分方程及边界条件.针对一般边值问题,构造了一种融合Gauss-Lobatto求积准则与微分求积准则的2节点16自由度微分求积有限元.通过对比性研究,验证了理论模型以及求解方法的有效性.最后,探究了梯度指数、内禀特征长度、几何参数及边界条件对微梁静态响应与振动特性的影响.结果表明,该文所发展的梁模型及微分求积有限元适用于研究各种长细比的功能梯度微梁的静/动力学问题,引入尺度效应会显著地改变微梁的力学特性.     

用截面变形耦合有限元法分析复合材料梁

复合材料板和梁具有优良的特性, 从而获得了广泛的应用．然而由于材料的各向异性, 使得对这类材料构件作变形和应力分析时,即使应用如有限元法的数值分析手段仍是非常复杂费时的．为此提出了一个可应用常规有限单元法,分析等截面复合材料梁承受均匀拉弯扭载荷的一个简单精确分析的实施方法．由于巧妙地利用了变形的对称特性,使得分析只需建立在梁的一个切片构造的几何模型上,用常规三维实体有限单元进行结构离散．推导了精确的变形场模式,并借助结构平移自由度的耦合关系使得数值分析易于实施．并通过数值算例来阐明方法的实施过程．     

边界条件对梁类结构系统刚度的影响

车身骨架是由大量梁类结构单元构成的.除了这些梁的截面形状和尺寸外,边界条件也对系统刚度影响很大.讨论了各种边界条件和载荷模式下的梁系统的合成刚度.基于两端固支的均匀截面梁的弯曲和扭转刚度,研究了各联结刚度的大小对系统刚度的贡献,并绘制了相应的影响曲线.最后,通过上述解析公式和有限元法计算了某汽车仪表板横梁系统的实际弯曲和扭转刚度.文中获得的静态刚度公式对其它梁类结构也适用。     

铁磁体磁弹性相互作用的广义变分原理与理论模型 *

定量分析发现:目前对三维弹性体所建立的各类理论模型均不能同时模拟铁磁介质磁弹性相互作用的两类基本实验现象 .进而导致模拟复杂形状结构 ,如壳体的磁弹性力学行为陷入困境 .这样 ,对三维铁磁弹性介质建立能统一描述已有两类典型实验现象的理论模型就成为模拟复杂形状结构磁弹性相互作用力学特征的关键 .从三维铁磁体磁弹性耦合系统的总能量泛函变分原理出发 ,建立了能同时模拟已有铁磁板磁弹性相互作用两类典型实验现象的三维可磁化弹性体的理论模型 .结果表明 :对于各向同性线性铁磁体 ,除了得到与由经典磁偶极子物理模型导出的宏观电磁力计算式一致的作用在铁磁介质上的磁体力外 ,还得到了作用在可磁化介质表面的边界面分布磁力 ,其值为两侧磁介质Faraday磁应力在表面处的跳变值 .这是各经典模型 ,如磁偶极子模型和公理化模型等所没有的 .     

Contact formulation of non-linear problems in the mechanics of shells with their end sections connected by a plane curvilinear rod

Starting from the consistent version of the geometrically non-linear equations of the theory of elasticity for small deformations and arbitrary displacements, a Timoshenko-type model that takes account of shear and compression deformations and also an extended variational Lagrange principle, an improved geometrically non-linear theory of static deformation is constructed for reinforced thin-walled structures with shell elements, the end sections of which are connected by a rod. It is based on the introduction into the treatment of contact forces and torques as unknowns on the lines joining the shells to the rods and it enables all classical and non-classical forms of loss of stability in structures of the class considered to be investigated. An analytical solution of the problem of the stability of a rectangular plate, that is under compression in one direction, supported by a hinge along two opposite edges and joined by a hinge with an elastic rod on one of the other two edges, is found using a simplified version of the linearized equations.     

Mixed finite element models for free vibrations of thin-walled beams

Simple mixed finite element models are developed for the free vibration analysis of curved thin-walled beams with arbitrary open cross section. The analytical formulation is based on a Vlasov's type thin-walled beam theory which includes the effects of flexural-torsional coupling, and the additional effects of transverse shear deformation and rotary inertia. The fundamental unknowns consist of seven internal forces and seven generalized displacements of the beam. The element characteristic arrays are obtained by using a perturbed Lagrangian-mixed variational principle. Only C⁰ continuity is required for the generalized displacements. The internal forces and the Lagrange multiplier are allowed to be discontinuous at interelement boundaries.

Numerical results are presented to demonstrate the high accuracy and effectiveness of the elements developed. The standard of comparison is taken to be the solutions obtained by using two-dimensional plate/shell models for the beams.     

积分形式非局部本构关系的界带分析方法

基于Hamilton体系研究了Eringen的非局部线弹性本构关系.Eringen的非局部线弹性理论存在积分型和微分型两类本构关系.由于方程的形式简单,目前多采用微分型本构;而积分型本构方程是典型的积分-微分方程,数值求解较为困难.在分析结构力学中提出的界带分析方法,成功求解了时间滞后问题的积分-微分方程.根据分析动力学与分析结构力学的模拟关系,将界带分析方法引入到非局部理论的积分型本构方程,可以实现积分-微分方程的数值求解.通过杆件的振动分析算例验证了该套理论算法的准确性和可行性,也指出了辛体系算法在非局部力学问题中的潜力.     

Elastic solutions of a functionally graded cantilever beam with different modulus in tension and compression under bending loads

This paper considers a functionally graded cantilever beam with different modulus in tension and compression. The beam is subjected to bending loads, including pure bending, shear force at the free end and uniform pressure on the upper lateral, respectively. Its modulus values in tension and compression both change with the thickness coordinate as arbitrary functions, which could bring the beam a broader range of applications in engineering. The problem is treated as a plane stress case and described by Airy stress function. By using semi-inverse method, the elastic solutions for the beam are obtained, which can be easily degenerated into the ones for homogeneous beams. An example is finally presented to show the effect of nonhomogeneous materials with different modulus on the elastic field in a cantilever beam.     

Remarks on the idealist and empiricist interpretation of frequentism: Robert Leslie Ellis versus John Venn

The goal of this paper is to correct a widespread misconception about the work of Robert Leslie Ellis and John Venn, namely that it can be considered as the ‘British empiricist’ reaction against the traditional theory of probability. It is argued, instead, that there was no unified ‘British school’ of frequentism during the nineteenth century. Where Ellis arrived at frequentism from a metaphysical idealist transformation of probability theory’s mathematical calculations, Venn did so on the basis of an empiricist critique of its ‘inverse application’.     

Stability and vibration analysis of axially-loaded shear beam-columns carrying elastically restrained mass

Classical shear beams only consider the deflection resulting from sliding of parallel cross-sections, and do not consider the effect of rotation of cross-sections. Adopting the Kausel beam theory where cross-sectional rotation is considered, this article studies stability and free vibration of axially-loaded shear beams using Engesser’s and Haringx’s approaches. For attached mass at elastically supported ends, we present a unified analytical approach for obtaining a characteristic equation. By setting natural frequencies to be zero in this equation, critical buckling load can be determined. The resulting frequency equation reduces to the classical one when cross-sections do not rotate. The mode shapes at free vibration and buckling are given. The frequency equations for shear beam-columns with special free/pinned/clamped ends and carrying concentrated mass at the end can be obtained from the present. The influences of elastic restraint coefficients, axial loads and moment of inertia on the natural frequencies and buckling loads are expounded. It is found that the Engesser theory is superior to the Haringx theory.     

Uniform stabilization of a nonlinear structural acoustic model with a Timoshenko beam interface

This paper is concerned with a nonlinear model which describes the interaction of sound and elastic waves in a two‐dimensional acoustic chamber in which one flat ‘wall’, the interface, is flexible. The composite dynamics of the structural acoustic model is described by the linearized equations for a gas defined on the interior of the chamber and the nonlinear Timoshenko beam equations on the interface. Uniform stability of the energy associated with the interactive system of partial differential equations is achieved by incorporating a nonlinear feedback boundary damping scheme in the equations for the gas and the beam. Copyright © 2006 John Wiley & Sons, Ltd.     

一种获得各向异性平面梁在任意荷载作用下弹性解的新方法

通过求解函数方程,给出了一种获得各向异性线性平面梁弹性解的新方法,该方法可以考虑任意形式的荷载以及各种端部支撑条件．将该方法与传统的逆解法或者半逆解法比较,其最大的好处在于不需要猜测应力函数的形式而直接获得问题的精确解．算例验证了该方法的正确性,同时也提供了一种求解平面梁承受任意荷载的新思路.     

Critical state of a thin-walled beam under combined load

Subject of the paper is a simply supported thin-walled beam. The beam carries uniformly distributed transverse load, small axial force and two different moments located at its both ends. The elastic potential energy and the work of the loads for the beam are described. Basing on the minimum of the total potential energy the general algebraic equation of the critical state for the beam is obtained. The equation describes a convex hyper-surface. Particularly simply load cases are studied. Based on the general equation of the critical state numerical investigations are realized. The results are shown in figures.     

Machine learning aided static structural reliability analysis for functionally graded frame structures

A novel machine learning aided structural reliability analysis for functionally graded frame structures against static loading is proposed. The uncertain system parameters, which include the material properties, dimensions of structural members, applied loads, as well as the degree of gradation of the functionally graded material (FGM), can be incorporated within a unified structural reliability analysis framework. A 3D finite element method (FEM) for static analysis of bar-type engineering structures involving FGM is presented. By extending the traditional support vector regression (SVR) method, a new kernel-based machine learning technique, namely the extended support vector regression (X-SVR), is proposed for modelling the underpinned relationship between the structural behaviours and the uncertain system inputs. The proposed structural reliability analysis inherits the advantages of the traditional sampling method (i.e., Monte-Carlo Simulation) on providing the information regarding the statistical characteristics (i.e., mean, standard deviations, probability density functions and cumulative distribution functions etc.) of any concerned structural outputs, but with significantly reduced computational efforts. Five numerical examples are investigated to illustrate the accuracy, applicability, and computational efficiency of the proposed computational scheme.