Influence of polarization-matched AlGaInN barriers in blue InGaN light-emitting diodes

The advantages of blue InGaN light-emitting diodes with low bandgap energy and polarization-matched AlGaInN barriers are demonstrated numerically. Simulation results show that, besides the common benefit of enhanced electron-hole spatial overlap in the quantum well from the polarization-matched condition, the lower bandgap energy barriers can have additional advantages of more uniform carrier distribution among quantum wells while maintaining sufficient electron confinement. The internal quantum efficiencies of all the polarization-matched structures under study exhibit less severe efficiency droop, which is presumably attributed to the suppression of Auger recombination.     

Numerical study of optical properties of InGaN multi-quantum-well laser diodes with polarization-matched AlInGaN barrier layers

The optical properties of InGaN multi-quantum-well laser diodes with different polarization-matched AlInGaN barrier layers have been investigated numerically by employing an advanced device simulation program. The use of quaternary polarization-matched AlInGaN barrier layers enhances the electron–hole wave function overlap due to the compensation of polarization charges between InGaN quantum well and AlInGaN barrier layer. According to the simulation results, it is found that, among the polarization-matched quantum-well structures under study, lower threshold current and higher slope efficiency can be achieved simultaneously when the aluminum composition in AlInGaN barrier layers is about 10–15%. The optimal polarization-matched InGaN/AlInGaN laser diode shows lower threshold current and higher slope efficiency compared to conventional InGaN/InGaN laser diodes.     

Effect of spontaneous and piezoelectric polarization on optical characteristics of ultraviolet AlGaInN light-emitting diodes

Polarization is a crucial issue for electrical and optical characteristics of the UV AlGaInN light-emitting diodes. The effect of spontaneous and piezoelectric polarization on optical characteristics of the UV AlGaInN light-emitting diodes is investigated numerically. The simulation results indicate that the polarization-related effect for the UV AlGaInN light-emitting diodes is dominated by the piezoelectric polarization. When the UV AlGaInN light-emitting diodes are without piezoelectric polarization, the optical performance is enhanced effectively due to improved overlap of electron and hole wavefunctions, reduced electron leakage current, and increased density of holes in the active region.     

Performance improvement of InGaN blue light-emitting diodes with several kinds of electron-blocking layers

The performance of InGaN blue light-emitting diodes(LEDs) with different kinds of electron-blocking layers is investigated numerically.We compare the simulated emission spectra,electron and hole concentrations,energy band diagrams,electrostatic fields,and internal quantum efficiencies of the LEDs.The LED using AlGaN with gradually increasing Al content from 0% to 20% as the electron-blocking layer(EBL) has a strong spectrum intensity,mitigates efficiency droop,and possesses higher output power compared with the LEDs with the other three types of EBLs.These advantages could be because of the lower electron leakage current and more effective hole injection.The optical performance of the specifically designed LED is also improved in the case of large injection current.     

Performance enhancement of an InGaN light-emitting diode with an AlGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode(LED) with an AlGaN/InGaN superlattice(SL)electron-blocking layer(EBL) is studied numerically,which involves the light-current performance curve,internal quantum efficiency electrostatic field band wavefunction,energy band diagram carrier concentration,electron current density,and radiative recombination rate.The simulation results indicate that the LED with an AlGaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular AlGaN EBL or a normal AlGaN/GaN SL EBL because of the appropriately modified energy band diagram,which is favorable for the injection of holes and confinement of electrons.Additionally,the efficiency droop of the LED with an AlGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

Improvement of characteristics of InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of InGaN light-emitting diode (LED) with a specific design of staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement of optical performance compared with the design of conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of LED could be one of the main reasons for these improvements.     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.     

Performance Improvement of GaN-Based Violet Laser Diodes

The influences of InGaN/GaN multiple quantum wells(MQWs) and AlGaN electron-blocking layers(EBL) on the performance of GaN-based violet laser diodes are investigated. Compared with the InGaN/GaN MQWs grown at two different temperatures, the same-temperature growth of InGaN well and GaN barrier layers has a positive effect on the threshold current and slope efficiency of laser diodes, indicating that the quality of MQWs is improved. In addition, the performance of GaN laser diodes could be further improved by increasing Al content in the AlGaN EBL due to the fact that the electron leakage current could be reduced by properly increasing the barrier height of AlGaN EBL. The violet laser diode with a peak output power of 20 W is obtained.     

Improved color rendering of phosphor-converted white light-emitting diodes with dual-blue active layers and n-type AlGaN layer

An InGaN/GaN blue light-emitting diode (LED) structure and an InGaN/GaN blue-violet LED structure were grown sequentially on the same sapphire substrate by metal-organic chemical vapor deposition. It was found that the insertion of an n-type AlGaN layer below the dual blue-emitting active layers showed better spectral stability at the different driving current relative to the traditional p-type AlGaN electron-blocking layer. In addition, color rendering index of a Y3Al5O12:Ce3+ phosphor-converted white LED based on a dual blue-emitting chip with n-type AlGaN reached 91 at 20 mA, and Commission Internationale de L'Eclairage coordinates almost remained at the same point from 5 to 60 mA.     

Investigation of blue InGaN light-emitting diodes with p-AlGaN/InGaN superlattice interlayer

The blue InGaN light-emitting diodes (LEDs), employing a lattice-compensated p-AlGaN/InGaN superlattice (SL) interlayer to link the last quantum barrier and electron blocking layer (EBL), are proposed and investigated numerically. The simulation results indicate that the newly designed LEDs have better hole injection efficiency, lower electron leakage, and smaller electrostatic fields in the active region over the conventional LEDs mainly attributed to the mitigated polarization-induced downward band bending. Furthermore, the markedly improved output power and efficiency droop are also suggested when the conventional LEDs corresponding to experiment data are replaced by the newly designed LEDs.     

Ultrashort-pulse laser irradiation of metal films: the effect of a double-peak laser pulse

The optical properties of blue-violet InGaN light-emitting diodes under normal and reversed polarizations are numerically studied. The best light-emitting performance under normal and reversed polarization is obtained in a single quantum-well structure and double quantum-well structure, respectively. The key factors responsible for these phenomena are presumably the carrier concentration distribution and the amount of carriers in quantum wells. The turn-on voltage of light-emitting diodes under reversed polarization is lower than that of light-emitting diodes under normal polarization, due mainly to lower potential heights for electrons and holes in the active region.     

The advantage of blue InGaN multiple quantum wells light-emitting diodes with p-AlInN electron blocking layer

InGaN based light-emitting diodes (LEDs) with different electron blocking layers have been numerically investigated using the APSYS simulation software. It is found that the structure with a p-AlInN electron blocking layer showes improved light output power, lower current leakage, and smaller efficiency droop. Based on numerical simulation and analysis, these improvements of the electrical and optical characteristics are mainly attributed to the efficient electron blocking in the InGaN/GaN multiple quantum wells (MQWs).     

Recent progress in single chip white light-emitting diodes with the InGaN underlying layer

Tremendous progress has been achieved in white light-emitting diodes (LEDs). To further improve the quality of white light and simplify the fabrication process, a single chip white-light LED with the InGaN underlying layer (UL) was studied and fabricated. The turn-on voltage of this type of LED was 2.7 V, and the spectrum at a forward bias current of 20 mA was comprised of blue (443 nm) and yellow (563 nm) lights. The intensity ratio of blue to yellow light was almost constant with the in- creasing injectio...     

Improvement of light power and efficiency droop in GaN-based LEDs using graded InGaN hole reservoir layer

InGaN-based light-emitting diodes with graded indium composition p-type InGaN hole reservoir layer (HRL) are numerically investigated using the APSYS simulation software. It is found that by gradient increasing indium composition in growth direction of the p-InGaN HRL can improve light output power, lower current leakage and efficiency droop. Based on numerical simulation and analysis, these improvements on the electrical and optical characteristics are attributed mainly to tailoring energy band in p–n junction vicinal region, and finally enhanced the hole injection efficiency and electron blocking efficiency.     

Study on GaN-based light emitting diode with InGaN/GaN/InGaN multi-layer barrier

The current study investigates GaN-based light-emitting diodes (LEDs) with InGaN/GaN/InGaN multi-layer barrier (MLB). Simulation results show that GaN-based LEDs with MLB have better performance than conventional GaN-based LEDs with only one GaN barrier because of the enhancement in hole injection into the quantum well and decrease in electron leakage current.     

Performance improvement of GaN-based light-emitting diode with a p-InAIGaN hole injection layer

The characteristics of a blue light-emitting diode （LED） with a p-InA1GaN hole injection layer （HIL） is analyzed numerically. The simulation results indicate that the newly designed structure presents superior optical and electrical performance such as an increase in light output power, a reduction in current leakage and alleviation of efficiency droop. These improvements can be attributed to the p-InA1GaN serving as hole injection layers, which can alleviate the band bending induced by the polarization field, thereby improving both the hole injection efficiency and the electron blocking efficiency.     

Effects of quantum confined stark effect and well thickness on optical properties of double quantum wells violet InGaN laser diodes

The effects of quantum confined stark effect (QCSE) and quantum well (QW) thickness on the optical properties of violet InGaN laser diodes (LDs) have numerically been investigated. The simulation results indicated that the QCSE greatly effects the optical properties of LDs, where QCSE relates to the QW thickness and it increases when the QW thickness is wider which leads to deteriorating of the optical proprieties of the violet InGaN LD. The polarization in the active region of the InGaN LD has been estimated by the blue shift of the wavelength and it is found that the blue shift of the wavelength depends on the QW thickness. The major simulation result has shown that the best properties of violet InGaN LD can be obtained with smaller QW thickness, where more carriers can be restricted, stayed and overlapped inside the QW which leads to a larger stimulated recombination rate and optical material gain which in turn increase the output power of the LD; while decreasing the threshold current of the LD.     

InGaN/GaN多量子阱蓝色发光二极管的实验与模拟分析

分别采用量子阱模型和量子点模型对蓝色InGaN/GaN多量子阱发光二极管电学和光学特性进行模拟,并和实验测量结果进行了比对,结果发现,量子点模型的引入,很好地解决了I-V和电致发光二方面的实验与理论模型间符合程度不好的问题.同时,在I-V曲线特性模拟中发现,在量子点理论模型的基础上,只有考虑到载流子的非平衡量子传输效应,才能得到和实验相接近的I-V曲线,揭示着在InGaN/GaN 多量子阱发光二极管电输运特性中,载流子的非 关键词： InGaN/GaN 发光二极管 数值模拟 量子点模型     

A dual-blue light-emitting diode based on strain-compensated InGaN-AlGaN/GaN quantum wells

A strain-compensated InGaN quantum well(QW) active region employing a tensile AlGaN barrier is analyzed.Its spectral stability and efficiency droop for a dual-blue light-emitting diode(LED) are improved compared with those of the conventional InGaN/GaN QW dual-blue LEDs based on a stacking structure of two In0.18Ga0.82N/GaN QWs and two In0.12Ga0.88N/GaN QWs on the same sapphire substrate.It is found that the optimal performance is achieved when the Al composition of the strain-compensated AlGaN layer is 0.12 in blue QW and 0.21 in blue-violet QW.The improvement performance can be attributed to the strain-compensated InGaN-AlGaN/GaN QW,which can provide a better carrier confinement and effectively reduce leakage current.     

Numerical simulation of single layer polymer light-emitting diodes

A numerical model for the electrical properties for polymeric light-emitting diodes (PLEDs) is presented which accounts for drift- and diffusion transport, recombination and re-emission processes. The current–voltage characteristics of single layer polymer light-emitting diodes are found to be dominated by the space-charge limited bulk hole-conductivity. The device efficiency is found to increase with bias as electron current is strongly reduced by injection barrier. The operating voltage increases with increased thickness of polymer layer. The understanding of these characteristics will facilitate the further optimization of the performance of polymer LEDs.