The study of structure formation in a polymer-containing ionic liquid in terms of the integral equation theory

The structural properties of a polymer-containing ionic liquid under the conditions of good solubility of a flexible polymer are studied theoretically. Two systems are discussed: In one, polymer solubility is due to the presence of specific interaction between polymer chains and solvent cations; in the other, polymer solubility is due to the presence of specific interactions between the polymer and solvent anions. The dependences of the structural characteristics of a solution on the polymer concentration and the energy of attraction between polymer chains and solvent ions are calculated. In a semidilute polymer solution, long-range correlations of polymer chains with a power dependence of the characteristic scale of ordering on the polymer density appear. The conditions under which, along with the intermediate ordering typical of a pure ionic liquid, the long-range ordering of the solvent cations and anions occur after addition of a polymer to the ionic liquid are studied.     

高分子单链的研究进展

随着纳米科技在高分子领域的不断升温,高分子单链凝聚态的研究引起了人们的广泛重视。高分子单链以纳米尺度的微粒孤立存在,不存在分子链之间的几何缠结。本文综述了近年来国内外高分子单链的研究进展。首先介绍了高分子单链的主要制备方法如喷雾法、冷冻干燥法、微乳液聚合法、反向沉淀法以及表面扩展膜法,接着详细介绍了高分子单链的表征技术及高分子链构象的计算机模拟技术,最后介绍了高分子单链及单分子胶束在制备金属纳米粒子领域的应用,并展望了高分子单链的研究领域和方向。     

聚合物互通多孔材料的乳液模板法制备及其功能化研究*

本文对近年来利用乳液模板制备聚合物互通多孔材料的研究进行了综述,主要介绍以高内相乳液模板制备互通多孔聚合物整体柱和利用双重乳液 (或称多重乳液) 制备多孔或多空聚合物微球的进展;分析目前多孔聚合物材料研究中存在的问题及其研究动态;讨论合成多孔聚合物材料的性能缺陷及其表面功能化改性的相关研究;并对聚合物互通多孔材料潜在的应用和研究前景进行了展望。     

高分子稀溶液中偏离Huggins方程式的五种情况

在对高分子溶液的粘度研究中发现,在稀溶液中会出现五种偏离Huggins方程式的情况。本文就这五种情况作了较为详细的介绍,尤其就高分子－高分子和高分子－溶剂分子间的相互作用对二元体系（溶剂－聚合物）和三元体系（溶剂－聚合物A－聚合物B）粘度的影响进行了深入的讨论。     

Gel permeation chromatography with mixed eluents: Polymer solution as mobile phase

The GPC elution behaviour of a polymer was studied when a solution of another polymer in a liquid was used as an eluent. In ternary systems containing two polymers, GPC results are influenced by the thermodynamics of polymer incompatibility. The incompatibility manifests itself both in the slope of the dependence of elution volume upon the concentration of injected polymer and in the shift of elution volumes extrapolated to zero concentration. Experimental data for systems containing poly(styrene) and poly(methyl methacrylate) have been accounted for qualitatively by theoretical views on coil shrinkage resulting from polymer incompatibility. The concentration effects of the injected polymer and the polymer in the mobile phase on elution volume are compared; further parameters affecting the separation in the systems with polymer solution as eluent are discussed.     

剪切作用对功能聚合物微观结构性能的影响研究

梳型聚合物和活性聚合物是目前常用驱油聚合物,其增黏性和黏弹性是评价其驱油能力的重要指标.为考察剪切作用对两种聚合物溶液性能的影响,分别研究了梳型聚合物和活性聚合物溶液经过模拟炮眼剪切前后的宏观和微观性能变化.结果表明,在高速剪切、拉伸应力作用下,梳型聚合物黏度损失率为40.73%,活性聚合物黏度损失率为70.10%;当剪切频率为0.02 Hz时,梳型聚合物界面扩张弹性降低了19.03%,而活性聚合物界面扩张弹性降低了68.03%;相比活性聚合物,梳型聚合物紧密的空间网状结构虽被部分破坏,但仍有疏松的网络结构,且以聚集体的形式紧密地分散在溶液中,通过DLS及AFM测定表明其粒径尺寸稍有变小;可见梳型聚合物抗剪切能力较活性聚合物强.     

共轭聚合物发光和光伏材料研究进展

聚合物光电功能材料与器件因其广阔的应用前景,1990年以年来吸引了世界各国学术界的广泛关注和兴趣.聚合物光电子器件主要包括聚合物电致发光二极管、聚合物场效应晶体管和聚合物太阳能电池等,其使用的关键材料是共轭聚合物光电子材料,包括共轭聚合物发光材料、场效应晶体管材料和光伏材料等.本文主要对共轭聚合物电致发光材料和光伏材料的研究进展进行综述,介绍了这些聚合物材料的种类、结构和性质以及在聚合物电致发光器件和聚合物太阳能电池中的应用.并讨论了当前共轭聚合物光电子材料中的关键科学问题和今后的发展方向.     

智能高分子材料在智能给药系统中的应用

简要介绍了合成智能高分子材料、半合成智能高分子材料和天然智能高分子材料在智能给药系统中的应用研究进展,并展望了其在智能给药系统中的应用前景。     

智能高分子材料在智能给药系统中的应用

简要介绍了合成智能高分子材料、半合成智能高分子材料和天然智能高分子材料在智能给药系统中的应用研究进展,并展望了其在智能给药系统中的应用前景.     

聚合物熔体膜在基体表面的润湿和铺展行为

聚合物熔体膜在基体表面上的润湿和铺展行为受铺展系数和Hamaker常数影响。对于不能在基体表面上铺展的聚合物膜,当处于其玻璃化温度以上时,聚合物熔体膜将破裂,出现非连续区域。随着体系处于聚合物玻璃化温度以上时间的延长,非连续部分尺寸不断增长,增长速率与表面张力、聚合物粘度、聚合物液滴在基体表面的平衡接触角等因素有关,平衡后聚合物以液滴的形式在基体表面稳定存在。将带功能端基聚合物加入不能在基体表面上铺展的聚合物中,通过修饰聚合物与基体界面或改变聚合物熔体膜的表面张力,可以使原来不能在基体表面铺展的聚合物保持稳定。本文综述了聚合物熔体膜的铺展和润湿动力学研究进展,并归纳了使聚合物熔体膜稳定的方法。     

高分子表面活性剂的分子设计

简要讨论高分子表面活性剂的俣成和表征方法，分析了在水溶液中两亲性聚合分子形态与表面活性的关系，单分子／多分子胶束多的形成是导致聚合物表面活性变差的主要因素，提出了高分子表面活性剂的分子设计原则，设计了多种在高分子量下将能够优质优良表面活性的高分子表面活性剂分子结构模型。     

硅氧烷基聚合物电解质*

聚合物锂离子电池的核心技术是研制高离子传导率、适宜机械性能以及化学和电化学性能稳定的聚合物电解质材料。在众多寻求高性能聚合物电解质的研究工作中,由于硅氧烷基聚合物电解质具有灵活多样的分子结构设计、易于合成实施、优异的电化学性能和室温电导率等特点,一直是人们关注的热点领域。本文综述了近年来新型硅氧烷基聚合物电解质的设计与合成的研究工作,重点介绍了采用聚硅氧烷嵌段、接枝聚合物通过共混、互穿网络结构、交联网络结构以及无机-有机复合等方法开展的相关聚合物电解质的研究工作。同时也介绍了聚硅氧烷电解质的研究方法和基于聚硅氧烷电解质的应用研究进展。     

Tethered polymer layers: phase transitions and reduction of protein adsorption

The structural and thermodynamic properties of tethered polymer layers formed by spreading diblock copolymers at a solid surface or at a fluid‐fluid interface are studied using a molecular mean‐field theory. The role of the anchoring block in determining the properties of the tethered polymer layer is studied in detail. It is found that both the anchoring and the tethered blocks are very important in determining the phase behavior of the polymer layer. The structures of the coexisting phases, the phase boundaries and the stability of the layer are found to depend on the ratio of molecular weight between the two blocks, the polymer‐interface (surface) interactions and the strength of the interactions between the two blocks. The different phase transitions found are related to experimental observations. The properties of the polymer layers at coexistence reflect the block that is the dominant driving force for phase separation. The ability of the tethered polymer layers, under different conditions, to control protein adsorption to surfaces is also studied. It is found that the most important factors determining the ability of a polymer layer to reduce the equilibrium amount of proteins adsorbed to a surface are the surface coverage of polymer and the surface‐polymer interactions. The polymer chain length plays only a secondary role. For the kinetic control, however, it is found that the potential of mean‐force, and thus the early stages of adsorption, depends strongly on polymer molecular weight. Further, it is found that the molecular factors determining the ability of the tethered polymer layer to reduce the equilibrium amount of protein adsorption are different than those that control the kinetic behavior. Comparisons with experimental observations are presented. The predictions of the theory are in very good agreement with the measured adsorption isotherms. Guidelines for building optimal surface protection for protein adsorption, both kinetic and thermodynamic, are discussed.     

乙烯基三甲基硅烷等离子体聚合物膜的结构与性能

采用外部电极电容耦合高频等离子体装置对乙烯基三甲基硅烷(VTMS)进行等离子体聚合。用IR、XPS、PGC/MS、X-ray、ESR和元素分析等方法对聚合物结构进行表征,并推断聚合反应历程。应用TG研究聚合物的热性能。通过X-ray证实聚合物为非晶结构。在无添加气体存在时聚合,XPS测试结果表明产物中有氧嵌入,且聚合物的C/Si比总的说来比单体的C/Si比低。TG的测试结果表明聚合物膜具有优良的热稳定性。     

Friedel-Crafts Polymers. I. Self-Polycondensation of 4,4′-Dichloromethyldiphenyl Ether

Friedel-Crafts self-polycondensation of 4,4′-dichloromethyl-diphenyl ether (DDE) is studied under various experimental conditions. These polymer samples are infusible and are insoluble in all solvents. The polymer samples, PDs, are characterized by elemental analysis, IR spectral study, and by TGA. Polymer reaction products of one polymer sample are prepared by subjecting it to Friedel-Crafts reaction with excess benzene and by treating it with triethylamine. Both the polymer reaction products are found to be less stable than the parent polymer sample.     

Direct probing of sorbent-solvent interactions for amylose tris(3,5-dimethylphenylcarbamate) using infrared spectroscopy, X-ray diffraction, solid-state NMR, and DFT modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.     

Effect of polymer size and chain length on depletion interactions between two colloids

A density functional theory based on the weighted density has been developed to investigate the depletion interactions between two colloids immersed in a bath of the binary polymer mixtures, where the colloids are modeled as hard spheres and the polymers as freely jointed tangent hard-sphere chain mixtures. The theoretical calculations for the depletion forces between two colloids induced by the polymer are in good agreement with the computer simulations. The effects of polymer packing fraction, degree of polymerization, polymer/polymer size ratio, colloid/polymer size ratio on the depletion interactions, and colloid-colloid second virial coefficient B2 due to polymer-mediated interactions have been studied. With increasing the polymer packing fraction, the depletion interaction becomes more long ranged and the attractive interaction near the colloid becomes deeper. The effect of degree polymerization shows that the long chain gives a more stable dispersion for colloids rather than the short chain. The strong effective colloid-colloid attraction appears for the large colloid/polymer and polymer/polymer size ratio. The location of maximum repulsion Rmax is found to appear Rmax approximately sigmac+Rg2 for the low polymer packing fraction and this is shifted to smaller separation Rmax approximately sigmac+sigmap2 with increasing the polymer packing fraction, where sigmap2 and Rg2 are the small-particle diameter and the radius of gyration of the polymer with the small-particle diameter, respectively.     

弱电场驱动下高分子链在周期管道内输运的模拟研究

采用Langevin动力学方法模拟研究了弱电场驱动下高分子链在无限长周期管道中的输运过程. 管道由长度相等的α和β两部分周期排列而成, 其中高分子链与α管道间存在相互吸引作用, 而与β管道间存在纯排斥作用. 模拟结果表明, 高分子链在输运过程中存在明显的受限阶段, 其逃离受限的方式与管道宽度有关且满足不同的规律. 对于窄管道, 高分子链在输运过程中呈直线伸展构型且运动具有“蛇爬行”特征. 高分子链逃离受限过程伴随着整条链的运动, 从而导致迁移率随高分子链长呈周期变化, 而且在迁移率极值位置, 高分子链投影长度与管道半周期之间存在简单的整数倍关系. 对于宽管道, 高分子链在输运过程中出现弯折构型且运动具有“蠕虫运动”特征. 当链长比较长时, 高分子链可通过链前端部分的伸长逃离受限, 从而导致迁移率与高分子链长度无关. 模拟结果可能有助于利用周期管道对不同长度的高分子链进行分离及可控输运.     

Polymer education in korea

The present article deals with the education on polymer science and technology in Korea. It starts first in Middle Schools with introduction of plastics as an industrial material and their classification into thermoplastics and thermosets. Korean university-level polymer educations are conducted in 17 universities having separate polymer departments as well as in those without polymer departments. In the former intensive education on polymers is conducted and in the latter various polymer courses are independently offered in various departments, merely as electives.     

单分散大粒径聚合物微球的合成及应用

单分散，大粒径聚合物微球是近２０年来开发的一类球形高分子粒子，在标准计量、情报信息、化学化工、医学免疫及生物化学等许多领域里有着广阔的应用前景，其合成和应用在高分子科学领域里已成为人们致力于研究和开发的热门课题。