Non-linear analysis of functionally graded circular plates under asymmetric transverse loading

Based on the first-order shear deformation plate theory with von Karman non-linearity, the non-linear axisymmetric and asymmetric behavior of functionally graded circular plates under transverse mechanical loading are investigated. Introducing a stress function and a potential function, the governing equations are uncoupled to form equations describing the interior and edge-zone problems of FG plates. This uncoupling is then used to conveniently present an analytical solution for the non-linear asymmetric deformation of an FG circular plate. A perturbation technique, in conjunction with Fourier series method to model the problem asymmetries, is used to obtain the solution for various clamped and simply supported boundary conditions. The material properties are graded through the plate thickness according to a power-law distribution of the volume fraction of the constituents. The results are verified by comparison with the existing results in the literature. The effects of non-linearity, material properties, boundary conditions, and boundary-layer phenomena on various response quantities in a solid circular plate are studied and discussed. It is found that linear analysis is inadequate for analysis of simply supported FG plates which are immovable in radial direction even in the small deflection range. Furthermore, the responses of FG materials under a positive load and a negative load of identical magnitude are not the same. It is observed that the boundary-layer width is approximately equal to the plate thickness with the boundary-layer effect in clamped FG plates being stronger than that in simply supported plates.     

正交各向异性圆板大挠度问题的一种解法

本文基于Berger方法研究了正交各向异性圆板的大挠度问题。在所讨论问题的总势能泛函中引入中面应变不变量并应用欧拉变分方程,导得了非耦联的控制方程。最后由加权积分法给出均布载荷作用下周边固定和周边不动简支圆板的解析数值结果。     

Multiple mode large amplitude vibration of thick orthotropic circular plates

This paper is analytically concerned with the large amplitude vibration of thick orthotropic circular plates incorporating the effects of transverse shear and rotatory inertia. Von Kármán-type field equations written in terms of the three displacement components of the plate are utilized to obtain solutions to clamped stress-free and immovable plates. By means of Galerkin's technique and a numerical Runge-Kutta procedure a multiple-mode analysis is carried out in both cases. Exact solutions are reported for two of the three governing equations. Effects of transverse shear deformation and modal interaction are found to be significant for orthotropic thick plates. The method given here could be extended to the multiple-mode analysis of circular plates with other boundary conditions.     

Large amplitude free vibrations of irregular plates placed on an elastic foundation

A unified method for determining the lowest natural frequency of large amplitude free vibrations of thin elastic plates of any shape and placed on elastic foundation is given. The conformal mapping technique is introduced and Galerkin's method is used to calculate approximate values of the lowest natural frequency. Time periods for circular, square and cornered plates placed on elastic foundation have been determined for simply supported and clamped edge boundary conditions. Practical values have also been determined experimentally. The results are presented in the form of graphs and they are compared with other known results.     

BENDING OF SECTORIAL LEVINSON PLATES: RELATIONSHIPS WITH CLASSICAL SOLUTIONS*

ABSTRACT

Relationships between bending solutions (deflections and stress resultants) of the Levinson third-order plate theory are presented in terms of the solutions of the classical plate theory for sectorial plates. These relationships are algebraic in nature, and can be readily used to determine the shear deformation theory (based on the Levinson plate theory) solutions of sectorial plates without going through the process of solving the governing equations. The sectorial plates considered have simply supported radial edges while the circular curved edges may be either simply supported, clamped, or free. Numerical results are presented to illustrate the usefulness of the developed relationships.

     

The validity range of CPT and Mindlin plate theory in comparison with 3-D vibrational analysis of circular plates on the elastic foundation

The validity and the range of applicability of the classical plate theory (CPT) and the first-order shear deformation plate theory, also called Mindlin plate theory (MPT), in comparison with three-dimensional (3-D) p-Ritz solution are presented for freely vibrating circular plates on the elastic foundation with different boundary conditions. In order to achieve this purpose, a study of the 3-D elasticity solution is carried out to determine the free vibration frequencies of clamped, simply supported and free circular plates resting on an elastic foundation. The Pasternak model with adding a shear layer to the Winkler model is used for describing the elastic foundation. In addition to being employed the p-Ritz algorithm, the analysis is based on the linear, small strain and 3-D elasticity theory. In this analysis method, a set of orthogonal polynomial series in a cylindrical polar coordinate system is used to arrive eigenvalue equation yielding the natural frequencies for the circular plates. The accuracy of these results is verified by appropriate convergence studies and checked with the available literature and the MPT. Furthermore, the effect of the foundation stiffness parameters, thickness-radius ratio, and different boundary conditions on the ill-conditioning of the mass matrix as well as on the vibration behavior of the circular plates is investigated. Afterwards, the validity and the range of applicability of the results obtained on the basis of the CPT and MPT for a thin and moderately thick circular plate with different values of the foundation stiffness parameters are graphically presented through comparing them with those obtained by the present 3-D p-Ritz solution. Finally, the phenomenon of mode shape switching is investigated in graphical forms for a wide range of the Winkler foundation stiffness parameters.     

Nonlinear bending of size-dependent circular microplates based on the modified couple stress theory

The present study proposes a nonclassical Kirchhoff plate model for the axisymmetrically nonlinear bending analysis of circular microplates under uniformly distributed transverse loads. The governing differential equations are derived from the principle of minimum total potential energy based on the modified couple stress theory and von Kármán geometrically nonlinear theory in terms of the deflection and radial membrane force, with only one material length scale parameter to capture the size-dependent behavior. The governing equations are firstly discretized to a set of nonlinear algebraic equations by the orthogonal collocation point method, and then solved numerically by the Newton–Raphson iteration method to obtain the size-dependent solutions for deflections and radial membrane forces. The influences of length scale parameter on the bending behaviors of microplates are discussed in detail for immovable clamped and simply supported edge conditions. The numerical results indicate that the microplates modeled by the modified couple stress theory causes more stiffness than modeled by the classical continuum plate theory, such that for plates with small thickness to material length scale ratio, the difference between the results of these two theories is significantly large, but it becomes decreasing or even diminishing with increasing thickness to length scale ratio.     

Non-linear axisymmetric static analysis of orthotropic thin annular plates

This investigation deals with the geometrically non-linear axisymmetric static analysis of elastic orthotropic thin annular plates subjected to uniformly distributed and ring loads. Non-linear differential equations in terms of the transverse displacement w and stress function ψ have been employed. Both w and ψ are expanded in finite power series and the orthogonal point collocation method has been used to obtain discretised algebraic equations from the governing differential equations. Results have been presented for annular plates with and without a rigid plug in the hole; simply supported, clamped and free outer edge conditions; three orthotropic parameters β; two annular ratios and two loading conditions. Results have also been presented illustrating the effect of an elastic rotational constraint at the edge and the effect of a prescribed inplane displacement of the edge.     

Deflection of sandwich plates in terms of corresponding Kirchhoff plate solutions

Summary This study presents exact relationships between the deflections of isotropic sandwich plates and their corresponding Kirchhoff plates. The governing equilibrium equations for the sandwich plates are derived on the basis of the Reissner-Mindlin shear deformation plate theory. The considered plates are either (i) simply supported, of general polygonal shape and under any transverse loading condition or (ii) simply supported and clamped circular plates under axisymmetric loading. As the relationships are exact under the assumptions used in the plate theories, one may obtain exact deflection solutions of sandwich plates if the Kirchhoff plate solutions are exact. The relationships should also be useful for the development of approximate formulas for plates with other shapes, boundary and loading conditions, and may serve to check numerical deflection values computed from sandwich plate analysis software.     

Exact solutions for the stability of viscoelastic rectangular plate subjected to tangential follower force

An exact solution procedure is formulated for the stability analysis of viscoelastic rectangular plate with two opposite edges simply supported and other two edges clamped as well as the viscoelastic rectangular plate with one edge clamped and other three edges simply supported under the action of tangential follower force. Firstly, by assuming the transverse displacement (W) as independent functions which automatically satisfies the simply supported boundary conditions, the governing partial differential equation is reduced to an ordinary differential equation with variable coefficients. Then, by the normalized power series method and applying the boundary conditions yield the eigenvalue problem of finding the roots of a fourth-order characteristic determinant. The results show that the aspect ratio λ and the dimensionless delay time H have great effects on the types of instability and the critical loads of the viscoelastic plates.     

Axisymmetric static and dynamic buckling of laminated thick truncated conical cap

Axisymmetric buckling analysis is presented for moderately thick laminated shallow, truncated conical caps under transverse load. Buckling under uniformly distributed loads and ring loads applied statically or as step function loads is considered. Marguerre-type, first-order shear deformation shallow shell theory is formulated in terms of transverse deflection w, the rotation ψ of the normal to the mid-surface and the stress function Φ. The governing equations are solved by the orthogonal point collocation method. Truncated conical caps with a circular opening, which is either free or plugged by a rigid central mass, have been analysed for clamped and simple supports with movable and immovable edge conditions. Typical numerical results are presented illustrating the effect of various parameters.     

Some static and dynamic problems concerning non-linear behavior of plates and shallow shells with discontinuous boundary conditions

Berger's field equations are generalized to dynamic phenomena in anisotropic plates and shallow shells the anisotropy being either of a cylindrically orthotropic or rectilinearly orthotropic type. Under the assumption that the rim of the structure is prevented from inplane motions explicit equations for the coupling parameter are given. Method of solution in the dynamic case is illustrated by an example involving isotropy and original axial symmetry of the structure. It is shown that for the non-linear oscillations of built-in circular plates a close agreement is reached with the results obtained by means of the Von Kármán field equations and a different coordinate function. The procedure suggested for solution of dynamic problems associated with the discontinuities of the boundary conditions is discussed and illustrated on an isotropic case involving a circular plate partially simply supported and partially clamped at the periphery.A numerical example is given concerning static behavior of an infinite isotropic strip uniformly loaded and simply supported along the edges except for two symmetrically situated built-in segments. The dependence of the average moment of clamping on the width of the built-in segments as well as on the load intensity for a fixed width of the segments is displayed on graphs.     

预应力条件下轴对称圆板的响应解

本文研究预应力条件下轴对称简支和固支圆板的瞬态响应,利用振型展开和Laplace变换给出解析表达式,提出简化型圆板的边界条件,利用Hankel变换和Laplace变换给出简捷的解,针对几种边界状态,比较了其频率和响应,同时讨论了几种常见的瞬态载荷的结构响应形式。     

A series boundary integration method for the bending analysis of anisotropic plates

A series boundary integration method is given which exactly satisfies the fundamental equation of bending analysis of general anisotropic plates or laminated plates in Kirchhoffs sense. With a unified deflection series, the method may be applied to the plates having different planforms and support conditions. Several groups of representative examples are calculated. The examples include circular, square and triangular plates, and their boundaries include clamped edges, simply supported edges, free edges and free corner. Numerical results indicate rapid convergency for both deflection and stress resultants and demonstrate wide applicability of the method.This subject was supported by the Natural Science Foundation of Guangdong Province.     

四种非正交边界板考虑初始荷载效应的后期荷载位移近似解

基于考虑初始荷载效应情况下板的一般形式的静力平衡微分方程,运用坐标变换得到了轴对称情形,考虑初始荷载效应后圆形板的极坐标形式的静力平衡微分方程。运用Galerkin法解得了简支等边三角形板、固支椭圆板、固支圆形板和简支圆形板四种非正交边界板考虑初始荷载效应的后期荷载位移近似解。运用相关文献提出的有限元法验证了近似解的正确性。各位移近似解表达式简单、物理意义明确,清楚地反映了初始荷载及相关因素对后期荷载位移的影响。计算分析表明：初始荷载效应提高了板的弯曲刚度,减小了板的后期荷载位移;板的初始荷载效应主要受初始荷载、跨厚比及边界条件等因素的影响。     

Static and dynamic non-linear behaviour of heated orthotropic circular plates

The fundamental quasilinear, decoupled equations of equilibrium and motion of heated orthotropic circular plates are derived from the energy equation in the light of a generalised analysis of a Berger-type which is based on the assumption that the effect of second strain invariant in the expression for total energy may be neglected. Solutions are obtained by Poincare's method of successive approximation and numerical results are given in graphical form for both static and dynamic cases of orthotropic circular plates, simply supported or clamped throughout the edge.     

Large deflections of prestressed simply supported rectangular plates under uniform pressure

The von Kármán large deflection equations for laterally loaded rectangular plates are extended to include uniform prestresses parallel to the edges and are solved for uniform load and for edges which are simply supported against movement normal to the plane of the plate and which are either held or free to move as a rigid body in the plane of the plate. Calculated values of center deflection and maximum stress parameters are given as functions of the load parameter for plates of various aspect ratios.     

Variational analysis of gradient elastic flexural plates under static loading

Gradient elastic flexural Kirchhoff plates under static loading are considered. Their governing equation of equilibrium in terms of their lateral deflection is a sixth order partial differential equation instead of the fourth order one for the classical case. A variational formulation of the problem is established with the aid of the principle of virtual work and used to determine all possible boundary conditions, classical and non-classical ones. Two circular gradient elastic plates, clamped or simply supported at their boundaries, are analyzed analytically and the gradient effect on their static response is assessed in detail. A rectangular gradient elastic plate, simply supported at its boundaries, is also analyzed analytically and its rationally obtained boundary conditions are compared with the heuristically obtained ones in a previous publication of the authors. Finally, a plate with two opposite sides clamped experiencing cylindrical bending is also analyzed and its response compared against that for the cases of micropolar and couple-stress elasticity theories.     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

Non-linear studies of orthotropic shallow spherical shells on elastic foundation

Governing non-linear integro-differential equations for cylindrically orthotropic shallow spherical shells resting on linear Winkler-Pasternak elastic foundations, undergoing moderately large deformations are presented. Three problems, namely, non-linear static deflection response, non-linear dynamic deflection response and dynamic snap-through buckling of orthotropic shells have been investigated. The influences of material orthotropy, foundation parameters and shell-material damping on the deflection response are determined for the clamped and the simply- supported immovable edge conditions accurately. Orthotropy, foundation interaction and material damping play significant roles in improving the load carrying capacity of the shell structures.