基于高光谱图像的生菜叶片氮素含量预测模型研究

为了便于更经济合理地为作物施肥,建立一种无损检测作物氮营养元素的高光谱图像模型。本实验以生菜为研究对象,无土栽培各氮素水平的生菜叶样本,在莲座期,采集生菜叶片样本的高光谱图像(390~1050 nm),同时采用凯氏定氮法测定对应生菜叶片样本的全氮含量。通过ENVI软件提取出生菜叶片中感兴趣区域的平均光谱作为该样本原始光谱信息,分别使用平滑处理(Smoothing)、多元散射矫正(MSC)、标准正态变量变换结合去趋势(SNV detrending)、一阶导数法(First derivative)、二阶导数法(Second derivative)、正交信号矫正(OSC)等预处理方法对样本原始光谱进行处理,然后利用偏最小二乘回归法(Partial least squares regression,PLSR)分别建立样本全波段光谱信息与氮含量的关系模型,研究各预处理方法对氮含量模型的影响,结果表明,使用OSC预处理的模型效果最好。为了简化模型,根据OSC预处理光谱后的模型的PLSR回归系数优选出敏感波长,利用训练集中样本的敏感波长光谱信息与氮含量数据重新构建PLSR回归模型,并利用测试集样本进行测试试验。结果表明,该模型得到校正集和预测集的决定系数(R2p)分别为0.89,0.81;均方根误差RMSEC,RMSEP分别为0.33,0.45。该回归模型大大降低了自变量个数,简化了模型,并且取得了较优的效果,这为生菜氮素含量预测提供了一种新的快速有效方法。     

近红外光谱测定人参与西洋参的主要皂甙总量

采用近红外光谱测定人参与西洋参的主要皂甙总量.采集人参与西洋参的漫反射光谱,分别对光谱进行正交信号校正(OSC)与常规预处理,建立了对应的偏最小二乘(PLS)回归模型.与常规最优预处理方法相比,OSC能很好地消除人参与西洋参的品种差异,显著提高了光谱与皂甙含量的相关系数,同时降低了PLS建模因子数,提高了模型的稳健性与...     

基于OSC–WT–PLS近红外光谱法测定烟草中芸香苷

采用正交信号校正(OSC)结合小波变换(WT)对烟草光谱进行光谱预处理,将预处理后的烟草光谱结合偏最小二乘法(PLS)建立了烟草光谱对芸香苷的预测模型。利用OSC滤除光谱中与芸香苷含量无关的光谱信息,确定OSC提取的最佳主成分数为7,再选择WT中的最佳小波基函数bior1.1对OSC预处理后的光谱进行压缩及进一步滤噪,然后进行PLS建模,OSC–WT–PLS所建模型决定系数r~2=0.874,校正标准偏差RMSEC=0.85,预测均方根误差RMSEP=0.743,交互验证系数Q_(ext)~2=0.887。结果表明,用OSC–WT–PLS可滤除光谱信息中与待测样品含量无关的信息、减少光谱数据量,降低建立模型的复杂度、提高建模速度及模型的预测能力、准确度。     

基于LVs-LS-SVM近红外光谱检测柴油运动粘度的方法研究

为了研究不同光谱输入方法对柴油运动粘度预测模型的影响,本文对预处理后的柴油光谱进行主成分分析(PCA)得到的前6个主成分(PCs)、建立偏最小二乘(PLS)回归曲线选取有效波长(EWs)和运用偏最小二乘回归(PLSR)建模得到的14个潜变量(LVs),将三者分别输入至最小二乘支持向量机(LS-SVM),对结果进行比较分析表明:LVs-LS-SVM建模得到的结果为柴油运动粘度(R_(Pre)~2=0.839,RMSEP=0.317,RPD=1.54),优于EWs-LS-SVM和PCs-LS-SVM模型,为柴油参数测定便携式仪器的开发奠定基础。     

应用遗传算法和PLS的近红外光谱预测玉米中淀粉含量的研究

以普通玉米籽粒为试验材料,在应用遗传算法结合偏最小二乘回归法对近红外光谱数据进行特征波长选择的基础上,应用偏最小二乘回归法建立了特征波长测定玉米籽粒中淀粉含量的校正模型．试验结果表明,基于11个特征波长所建立的校正模型,其校正误差（RMSEC）、交叉检验误差（RMSECV）和预测误差（RMSEP）分别为0.30％、0.35％和0.27％,校正数据集和独立的检验数据集的预测值与实际测定值之间的相关系数分别达到0.9279和0.9390,与全光谱数据所建立的预测模型相比,在预测精度上均有所改善,表明应用遗传算法和PLS进行光谱特征选择,能获得更简单和更好的模型,为玉米籽粒中淀粉含量的近红外测定和红外光谱数据的处理提供了新的方法与途径．     

基于X射线荧光光谱与多特征串联策略的土壤重金属含量预测

针对土壤重金属快速检测需求,基于模型集群分析方法进行特征波长变量选择,提出了利用X射线荧光光谱技术检测农田土壤中重金属含量的方法。采集91个配制土壤样品的X射线荧光光谱值,用于构建土壤重金属检测模型。通过多特征串联方法提取特征波长变量,首先采用区间组合优化算法(ICO)粗选波长,然后采用竞争适应性重加权采样法(CARS)剔除区间波长中的无关变量,最后采用连续投影算法(SPA)进行波长精简。通过多特征串联ICO-CARS-SPA算法对X射线荧光光谱进行特征变量选择,得到5组(26、25、29、39、33)特征波长点,据此建立Cu、Zn、As、Pb、Cr 5种土壤重金属含量偏最小二乘(PLS)检测模型,并与其他传统特征波长选择方法进行了对比。结果表明,ICO-CARS-SPA算法所选变量结合偏最小二乘(PLS)的建模效果最优,Cu、Zn、As、Pb、Cr的验证集决定系数分别为0.993 3、0.992 6、0.995 6、0.993 2和0.988 6,均方根误差分别为6.938 5、23.698 4、3.632 6、8.510 6和14.764 5,验证集平均相对偏差分别为0.255 1、0.065 0、0.102 5、0.241 4、0.104 7。基于X射线荧光光谱结合多特征串联策略的ICO-CARS-SPA算法可剔除更多无效波长,提升有效信息贡献度,简化了检测模型复杂度,为土壤重金属含量预测模型选取合适的特征波段提取方法提供了理论支撑。     

基于近红外光谱的食用植物油中反式脂肪酸含量快速定量检测及模型优化研究

利用近红外光谱技术对食用植物油中反式脂肪酸(Trans fatty acids,TFA)含量进行快速定量检测,并通过波段选择、预处理方法、变量筛选及建模方法对TFA含量预测模型进行优化.采用AntarisⅡ傅里叶变换近红外光谱仪在4000~10000 cm-1光谱范围采集98个食用植物油样本的近红外透射光谱,然后采用气相色谱法测定TFA的真实含量.首先,对样本原始光谱进行波段、预处理方法优选;在此基础上,采用竞争自适应重加权法(Competitive adaptive reweighted sampling,CARS)筛选TFA相关的重要变量,最后应用主成分回归、偏最小二乘和最小二乘支持向量机方法分别建立食用植物油中TFA含量的预测模型.研究结果表明,近红外光谱技术检测食用植物油中的TFA含量是可行的,优化后的最佳预测模型的校正集和预测集R2分别为0.992和0.989,RMSEC和RMSEP分别为0.071%和0.075%.最佳预测模型所用的变量仅26个,占全波段变量的0.854%.此外,与全波段偏最小二乘预测模型相比,其预测集R2由0.904上升为0.989,RMSEP由0.230%下降为0.075%.由此表明,模型优化非常必要,CARS能有效筛选TFA相关的重要变量,极大减少建模变量数,从而简化预测模型,并较大提高预测模型的精度和稳定性.     

不同比色皿对近红外光谱法检测水质酸度的影响及校正分析北大核心CSCD

为减小不同比色皿对近红外光谱测量结果的影响,提高水质酸度定量分析模型的预测精度,探讨了正交信号校正(OSC)用于不同比色皿的光谱背景干扰的去除效果。用两个同一批次的石英比色皿对32个不同pH的水样装样,采集近红外光谱数据,采用OSC对原始光谱进行预处理。比较OSC预处理前后两组光谱间的差异,并建立了水质酸度的偏最小二乘(PLS)定量分析模型,分析了光谱差异对模型预测精度的影响。结果表明:经OSC预处理后,两组光谱的平均差异值由0.0042降低至0.0013,光谱校正率达90%;与原始光谱建立的PLS模型相比,基于OSC预处理后的光谱建立的PLS模型的预测精度显著提高,预测均方根误差差值由0.912降低至0.205,相关系数差值由0.364降低至7.00×10^(-3),二者分别减小了78%和98%。     

基于近红外光谱分析技术的食品包装塑料的定性分析

该文基于近红外漫反射光谱分析技术对食品包装材料聚乙烯、聚丙烯进行定性判别试验研究,选取不同波段范围、采用不同光谱预处理方法,使用主成分分析法(Principal component analysis,PCA)结合SIMCA、贝叶斯判别、K-近邻3种模式识别方法建立定性预测模型,并根据正确识别率比较了各模型预测性能。结果表明：使用SIMCA方法、贝叶斯判别、K-近邻3种方法建立的定性校正模型均在1 050~1 550 nm波长范围内效果较好;采用矢量归一化、标准正态变量变换、中心化、滑动均值滤波、多项式平滑滤波、一阶微分6种光谱预处理方法和上述3种模式识别方法对塑料样品近红外光谱进行了数据处理,其中在1 050~1 550 nm范围内,主成分因子数为3,采用原始光谱建立的K-近邻定性校正模型较优,对样品校正集和预测集的正确识别率均为100%。可为食品包装材料聚乙烯、聚丙烯的快速鉴别研究提供参考。     

烟叶总还原糖近红外光谱稳健模型的建立及其在多台仪器的长期应用

该文使用基于光谱图像特征抽提的尺度不变特征变换（SIFT）的多步波长筛选方法建立了烟叶总还原糖（TRS）的近红外光谱（NIRS）稳健模型，实现了其在多台仪器的直接共享和长期应用。首先采用SIFT方法根据代表性主机样品光谱挑选特征光谱点集合Uc，然后从Uc中剔除样本光谱标准方差（SDSS）过低的点，挑选重要特征光谱点集合Uic，此两步波长筛选法简称为SIFT-SDSS。随后进一步从Uic中挑选对水分不敏感（Moisture-unsensitive,MUS）的波长点，得到重要且稳定的光谱点集合Uisc，此3步波长筛选法简称为SIFT-SDSSMUS。从2011～2013年采集的292个主机烟叶样品中按TRS浓度区间选择80%样品作为建模集，建立不同波长集合下烟叶TRS的偏最小二乘回归（PLSR）校正模型。结果表明，基于SIFT-SDSS两步波长筛选的光谱点建立的TRS模型传递到6台从机预测另外77个2011～2013年样品的TRS时，所有从机样品的平均相对误差绝对值（MARE）均小于6%，满足企业内控要求。该模型对5台近红外仪上2014～2020年各年度样品、1台近红外仪上2014～201...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.