Characterisation of ultra-thin films of oxidised bacterial cellulose for enhanced anchoring and build-up of polyelectrolyte multilayers

The process of catalytic oxidation of bacterial cellulose (BC) ultra-thin films with 2,2,6,6-tetramethyl-1-piperidinyloxy was investigated along with their capability to adsorb oppositely charged polyelectrolytes of chitosan and alginate. The time-dependent oxidation of BC films was analysed by X-ray photoelectron spectroscopy and quartz crystal microbalance (QCM) experiments. A negatively charged surface was achieved by inserting carboxylic groups, which was augmented by prolonged media exposure (17.9 %), compared with a fast oxidation process (9.1 %). Polyelectrolyte deposition was followed by QCM, which indicated that BC oxidation increased the first layer uptake of chitosan 17-fold (?105.0?±?1.5 Hz) in comparison with unoxidised BC (?6.0?±?0.2 Hz), confirming the capability of oxidised BC surfaces to exhibit strong electrostatic interactions and to support the build-up of a thicker multilayer system. These findings indicate that oxidised BC surfaces are capable of immobilising and detecting several charged species.     

Sustainable optically transparent composites based on epoxidized soy-bean oil (ESO) matrix and high contents of bacterial cellulose (BC)

Production of transparent composites from totally renewable resources with extraordinary potential for different applications can be made possible using cellulose. Composites of epoxidized soybean oil (ESO)/bacterial cellulose (BC) nanofibers have been prepared with high fiber content. Due to the nano-order scale network-like structure of BC nanofibers, composite films present high transparency even at high BC content. Transparency of films has been analyzed by UV–visible spectroscopy observing that only 15% of matrix transmittance is lost in the nanocomposites. ESO/BC composites show better mechanical properties with increasing BC content. Composites combine high stiffness and good ductility due to the incorporation of BC network structure in ESO matrix.     

Preparation and Characterizations of TiO2/Organically Modified Silane Composite Materials Produced by the Sol-Gel Method

TiO₂/organically modified silane (ORMOSIL) composite materials produced by the sol-gel method were studied for optical waveguide applications. High optical quality waveguiding films on different substrates, including silicon, gallium arsenide, silica/silicon substrates, and microscope glass slides, were prepared from high titanium content (0.2 molar) ÿ-glycidoxypropyltrimethoxysilane at low temperature. Scanning electron microscopy (SEM), atomic force microscopy (AFM), differential thermal analysis (DTA), thermal gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) have been used to investigate the optical and structural properties of the composite films. The TGA/DTA results showed that the organic compounds in the film would tend to decompose in the temperature range from 200°C to 500°C. SEM and AFM results showed that a dense and porous-free composite material film could be obtained at the heat treatment temperature of 100°C. It was also shown that ORMOSIL is integrated in the glass, providing low shrinkage and high cracking resistance. The propagation loss properties of the composite films were also investigated. About 1.1 dB/cm propagation loss of the planar waveguide film was obtained at the wavelength of 633 nm.     

Nanofibrillated cellulose/carboxymethyl cellulose composite with improved wet strength

In this paper, nanofibrillated cellulose/carboxymethyl cellulose (CMC) composite films were prepared using tape casting. The obtained transparent films showed shear induced partial alignment of fibrils along the casting direction, resulting in birefringence in cross polarized light. The carboxyl groups of CMC could be further utilized to create ionic crosslinking by treatment with glycidyl trimethyl ammonium chloride (GTMA). The GTMA treated composite films had improved mechanical properties both in wet and dry state. The chemical composition and morphologies of composites were analyzed with X-ray photoelectron spectroscopy, elemental analysis, scanning electron microscopy and wide-angle X-ray scattering.     

等离子体增强磁控溅射沉积碳化硅薄膜的化学结构与成膜机理

以CH4和Ar为工作气体,单晶硅为溅射靶,通过微波电子回旋共振(MW-ECR)等离子体增强非平衡磁控溅射方法在不同的CH4流量和沉积温度下制备了a-Si1-xCx∶H薄膜.利用傅里叶变换红外(FT-IR)光谱,X光电子能谱(XPS)和纳米硬度仪等表征方法研究不同沉积参数下薄膜的化学结构、化学配比和硬度的变化.结果表明:室温(25℃)下随CH4流量由5cm·3min-1增加到45cm3·min-1(标准状态)时,薄膜中Si—CH2键,C—H键含量逐渐增加,Si—H键变化不明显;膜中C原子百分比由28%增至76%,Si原子百分比由62%降至19%.当CH4流量为15cm3·min-1时,随沉积温度的升高,薄膜中Si和C原子百分比含量分别为52%和43%,且基本保持不变;膜中Si—H键和C—H键转化为Si—C键,薄膜的显微硬度显著提高,在沉积温度为600℃时达到29.7GPa.根据分析结果,提出了室温和高温下a-Si1-xCx:H薄膜生长模型.     

Influence of urea and glycerol on functional properties of biodegradable PVA/xylan composite films

In recent years, numerous studies have focused on biodegradable plastics for agricultural applications. To improve the mechanical and hydrophobic properties, biodegradable xylan composite films containing poly(vinyl alcohol) (PVA) were successfully prepared by casting method in this work. A series of composite films at a PVA/xylan weight ratio of 3:1 under the addition of glycerol and urea were investigated. Influences of the urea and glycerol amounts on the functional properties of composite films such as hydrophilicity/hydrophobicity, water vapor permeability (WVP), mechanical properties, solubility and degradability were comparatively investigated. Results showed that increasing the glycerol amount led to a decrease in tensile strength and an increase in elongation at break and WVP, while the addition of 1 % urea in composite films without glycerol had a positive impact on improving the water resistance of composite films; the contact angle and WVP values reached 114.68° and 4.11 × 10^?11 g m^?1 s^?1 Pa^?1. Moreover, thermogravimetric analysis, FTIR and a scanning electron microscope were used to confirm the compatibility of the PVA and xylan components. FTIR analysis displayed the intensity of hydroxyl groups of films became stronger with increasing amounts of glycerol, while the opposite results were obtained with an increase of the amount of urea. These indicated that glycerol could improve the miscibility between PVA and xylan, and the addition of urea could enhance the water resistance of composite films.     

Properties of bacterial cellulose transparent film regenerated from dimethylacetamide–LiCl solution

Excellent transparent films were prepared from bacterial cellulose (BC) sheets by solubilization of its defibrillated freeze‐dried specimens in a solvent of dimethylacetamide (DMAc) containing 8.0% (w/w) lithium chloride (LiCl), and their properties were compared with those of the native BC. Fibrillar structure of the native BC disappeared after dissolution, and the film formed after dissolution also loose this structure. Occurence of structural transformation from crystalline to amorphous state was also evidenced by X‐ray diffraction, solid state cross polarization/magic angle spinning ¹³C‐NMR and attenuated total reflectance–Fourier transform infrared spectroscopic analyses. In addition, excellent 3D uniform structure of the transparent BC film was further evidenced by X‐ray micro computed tomography. Plastic‐like characteristic was enhanced by film formation after dissolving the BC specimens in the DMAc–LiCl solution as shown by changing mechanical properties, a slight decrease in tensile strength (67.2 to 59.6 MPa) and breaking stress (67.2 to 58.4 MPa) but significant increase in elongation at break from 3.4 to 10.5%, and improvement of work of fracture from 5.8 to 21.2 kJ/m². Copyright © 2016 John Wiley & Sons, Ltd.     

Modifying bacterial cellulose with gelatin peptides for improved rehydration

Bacterial cellulose (BC) is a nanoscale and useful biomaterial with a fine fiber network and high water holding capacity. However, dried BC exhibits poor rehydration ability. The present study investigated the rehydration ability of composites of hydrolyzed gelatin peptides (HGP) and hydroxypropylmethyl cellulose-modified BC (HBC). The HGP with molecular weights <9 kDa were obtained by hydrolyzing gelatin with a combination of 1 % alcalase and 1.5 % pronase E at 50 °C for 2 h. The HGP/HBC nanocomposites exhibited higher rehydration ratios than composites prepared with gelatin. According to SEM images, gelatin and HGP successfully penetrated the cellulose network in composite films prepared using both immersion and adsorption (DA) methods. The high hydrophilic property of HGP resulted in a rehydration ratio of approximately 180 % at a HGP/HBC ratio of 4.5:1 (W/W) in DA composites. The 1 min rehydrated HGP/HBC composites possessed similar mechanical properties to the original wet type composites. Overall, results indicated that the HGP/HBC composites prepared using the DA method demonstrated the highest rehydration ability among the composite films evaluated.     

Synthesis and Properties of Hyperbranched Polyimides Combined with Silica

Summary: The novel hyperbranched polyimide - silica hybrid materials containing theoretically 16 wt% of an inorganic phase were prepared via a sol-gel process. An amine terminated polyimide precursor (hyperbranched polyamic acid) was prepared from commercially available monomers 4,4′,4″-triaminotriphenylmethane and 4,4′-oxydiphthalic anhydride in molar ratio 1:1. Tetramethoxysilane and/or 3-glycidoxypropyltrimethoxysilane (also used as a coupling agent) were used as silica precursors. During thermal exposition the polyimide precursor was transformed to hyperbranched polyimide and hydrolyzed alkoxy groups reacted mutually to form silica. The final products were self-standing films, whose structure was characterized by using IR and ¹³C and ²⁹Si solid state NMR spectroscopy. The influence of the amount of silica and/or coupling agent on their structure and thermal properties was described.     

Conductive Composite Materials of Polyethylene and Polypyrrole with High Modulus and High Strength

Composite films of polyethylene (PE) and polypyrrole (PPy) were prepared by polymerization of PPy on an ultradrawn polyethylene film with high modulus and high strength in ferric chloride (FeCl₃) aqueous solution. The electrical conductivity of the composite film was found to be related to the polymerization conditions, such as polymerization temperature, polymerization time, the concentration and the oxidation potential of the FeCl₃ solution. Scanning electron microscopy, FTIR and ¹³C NMR spectra were used to elucidate the morphological and structural variations of PPy prepared under different conditions, which lead to the differences in the electrical properties of the resultant composite films. The best electrical conductivity of the composite was about 5.5 S/cm for the film prepared under optimum conditions. The Young's modulus and the tensile strength reached 80 GPa and 3.2 GPa, respectively, which indicated the successful production of a conductive polymer with high strength and high modulus.     

Influence of chain length of prepolymers in permanent memory effect of PDLC assessed by solid-state NMR

ABSTRACT

The relationship between linear chain (ethylene oxide units) length of polymerisable monomers with morphology, electro-optical properties and ¹³C nuclear magnetic resonance (NMR) spectroscopy of the corresponding polymer-dispersed liquid crystal (PDLC) films was investigated. The preferred liquid crystal molecule alignment and permanent memory effect of PDLC were greatly influenced by the length of the molecular chain of prepolymers to be incorporated as a polymer matrix. By increasing the number of ethylene oxide in prepolymer chain and maintaining the number of functionalities (polymerisable groups in each monomer molecule), the permanent memory effect of PDLC increased, as proved by solid-state ¹³C NMR spectroscopy.     

Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Interfacial mechano-chemical grafting in styrene-butadiene rubber/halloysite nanotubes composites

SBR/unmodified HNT composites were prepared by open-mill mixing and vulcanization. The results showed that HNT could decrease the scorch and optimum cure time, and play a significant role in reinforcing SBR vulcanizates. Mechano-chemical grafting at the interface between HNT and SBR was investigated by using infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), solid-state ¹³C NMR spectra and bonded rubber content, etc. The results showed the shearing force during the mixing process can impel the grafting reaction of SBR onto the surfaces of HNT, which leads to interfacial chemical bonding between phenyl’s α-H of SBR and the surface groups of HNT with Si-OH or Al-OH. Thus, the mechanical properties of the composites were significantly enhanced.     

纳米银在细菌纤维素凝胶膜中的原位合成及性能表征

在细菌纤维素纳米纤维网络结构中采用吐伦试剂与含醛基化合物原位反应生成纳米银颗粒, 制备了纳米银/细菌纤维素(n-Ag/BC)复合凝胶膜, 研究了不同反应条件对复合材料的银含量、 化学结构和晶体结构的影响以及n-Ag/BC的微观结构和纳米银在纤维素网络中的存在形态; 探讨了纳米银颗粒在纤维素网络中的形成机理; 采用伤口常见细菌之一金黄色葡萄球菌测试了n-Ag/BC的抑菌性能; 将n-Ag/BC与胎鼠表皮细胞共培养考察了材料的生物相容性. 研究结果表明, 在细菌纤维素纳米网络结构中可生成直径约为几十纳米的单质纳米银粒子; n-Ag/BC的银含量随着吐伦试剂浓度的增加而增加, 同时银含量还取决于含醛基化合物的用量; 原位反应生成纳米银粒子后细菌纤维素的晶型和结晶度没有发生变化; 纳米银颗粒在细菌纤维素纳米网络结构的交叉处生成, 复合材料n-Ag/BC对金黄色葡萄球菌的抑菌率达到99%以上, 不影响细胞的增殖和分化过程, 具有良好的生物相容性, 是一种有广阔应用前景的创伤修复抗感染材料.     

Fast and Selective Aqueous-Phase Oxidation of Styrene to Acetophenone Using a Mesoporous Janus-Type Palladium Catalyst

A heterogeneous Janus-type palladium interphase catalyst was obtained by selective surface modification of a hollow mesoporous silica material. The catalyst comprises hydrophobic octyl groups on one side of the silica nanosheets and single-site bis-imidazoline dichlorido palladium(II) complexes on the other. The structure of this composite material has been analyzed by means of elemental analysis, atomic absorption spectroscopy, BET surface analysis, TGA, SEM and solid-state CP-MAS ¹³C and ²⁹Si NMR spectroscopy. The catalyst showed extraordinary activity for the aqueous-phase oxidation of styrene to acetophenone using 30% hydrogen peroxide as the oxidant. An 88% yield of acetophenone could be achieved after 60 min.     

Photochromism of novel molybdate/alkylamine composite thin films.

Novel inorganic/organic composite films of molybdates with photochromic properties have been prepared by self-assembly using alkylammonium ions as a supramolecular template. Both 1-hexadecylammonium/polyoxomolybdate (C16-Mo) and 1-octadecylammonium/polyoxomolybdate (C18-Mo) composite films have been successfully fabricated. The elemental analysis and thermal gravimetric analysis show that the main product in the C16-Mo film was (C16H33NH3)4Mo8O26. The X-ray diffraction (XRD) results indicate that the composite films were lamellar in nature. The IR, Raman and X-ray photoelectron spectroscopy (XPS) results show that the polyoxomolybdate anions present as MoO6 octahedra and that the Mo species exists as Mo6+ in the freshly prepared films. The alkyl chains in the 1-hexadecylammonium chains were linear and the alkyl groups are an all-trans configuration. Upon UV irradiation of the C16-Mo films, some Mo6+ was reduced to Mo5+, some -NH3+ became -NH2 with a concomitant increase in the concentration of -OH groups on the molybdate moieties, and the films were colored. Thus, the photochromism of the films involves the reduction of Mo6+ to Mo5+, coupled with a proton transfer from 1-hexadecylammonium ions to an oxygen atom at the Mo site. In contrast to thin films of transition-metal oxides, which all show photochromism in the blue region of the electromagnetic spectrum, these composite films show photochromism in the violet region with the greatest absorbance change at 472 nm.     

High‐performance aromatic thermosetting resins with hydroxyl and ethynyl groups

A novel hydroxyl‐ethynyl‐arene (HEA) resin was synthesized via Aldol condensation and Sonogashira reaction. The structure of the obtained resin was confirmed by the techniques of mass spectroscopy (MS), gel permeation chromatography (GPC), proton nuclear magnetic resonance spectroscopy (¹H‐NMR), Fourier transform infrared spectroscopy, (FT‐IR) and elemental analysis (EA). Differential scanning calorimetry (DSC) results showed an exotherm at the temperature range of 187°C–245°C, attributable to crosslinking reaction of the acetylene groups. After thermal cure, the obtained cured resin possessed excellent thermal stability. Thermal gravimetric analysis (TGA) in nitrogen showed the Td₅ (temperature of 5% weight loss) was about 400°C, and the char yield in nitrogen was about 78% at 900°C. The laminate composite of HEA resin was prepared and its mechanical and thermal properties were determined. The usefulness of the HEA resin as matrix for ablative composite was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.     

Improved thermal and mechanical properties of bacterial cellulose with the introduction of collagen

Composite films comprised of bacterial cellulose (BC) and collagen (COL) were developed using BC hydrogel membranes as the base material and COL as the reinforcing material. Glutaraldehyde (GT) and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC·HCl) were then used as cross-linking agents to prepare cross-linked BC/COL composite films by a wet chemical method. The effects of chemical cross-linking on the thermal and mechanical properties of composite films were investigated in detail. The COL molecules were adsorbed and deposited inside of 3D nanofiber networks of BC, coated on the surface of BC fibers. Chemical bonds formed between BC molecules, and between BC and COL molecules after cross-linking. Compared with BC, the obtained composite films showed 57.9 and 70.8% improvement in tensile strength after being cross-linked by GT and EDC·HCl, respectively. Cross-linking also enhanced the thermal stability of the specimens.     

Dye-polyoxometalate composite films: self-assembly, thermal and photochemical properties

A series of dye-polyoxometalate composite films were prepared by alternately depositing cationic dye molecules and anionic polyoxometalates such as Keggin-type [BW(12)O(40)](5-) and the sandwich complex [Co(4)(H(2)O)(2)(PW(9)O(34))(2)](10-)via layer-by-layer (LbL) self-assembly method. These cationic dye molecules (MB, AA, TH, BB3, BCB and NB) are heterocyclic planar and rigid phenothiazine and phenoxazine dye molecules with different substituting groups in the side chains. The self-assembly of the films was studied by UV-vis and IR spectra. The results show that the substituting groups of dye molecules such as NH(2) and CH(2)CH(3) have influence on the self-assembly properties. The continuous and regular growth of the films was also dependent upon hydrogen bonding (NHO) formed between the amino groups of dye molecules and oxygen atoms of POMs as well as electrostatic interactions. The investigation of thermal and photochemical treatments of the composite films is also presented. The thermal stability experiments indicate that the composite films of TH with two NH(2) substitute groups and NB with more pi-conjugated system exhibit high thermal stability, whereas the sunlight irradiation results indicate that the composite films of TH have good photochemical stability.     

层状纳米纤维素膜/PVA复合水凝胶的制备与力学性能研究

采用叠层复合与物理相分离的方法制备了层状纳米细菌纤维素(BC)膜/聚乙烯醇( PVA)复合水凝胶.研究了聚乙烯醇的质量百分数、BC膜的复合层数以及制备条件对复合水凝胶力学性能的影响;通过扫描电镜( SEM)观察比较了复合水凝胶中BC膜层与PVA界面结合情况.结果表明,复合水凝胶的力学性能与PVA的质量百分数和BC膜含水...