体心立方Ta的广义面错能及在Ⅱ型裂纹尖端初始塑性研究中的应用

基于嵌入原子势考察体心立方(bcc)金属Ta的广义层错能和广义孪晶能并获得广义层错能和广义孪晶能曲线. 研究表明,bcc Ta的广义层错能曲线与面心立方金属的广义层错能曲线有明显差异,Ta的广义层错能曲线不存在明显的能量极小值,位错主要以全位错的形式发射. 不同原子厚度的广义孪晶能曲线表明4个原子层的孪晶能曲线开始出现亚稳定的能量极小值,5个原子层的孪晶能曲线出现稳定的能量极小值. 为进一步验证广义层错能和广义孪晶能曲线揭示的塑性变形机理,采用准连续介质力学多尺度方法研究Ⅱ型裂纹尖端的初始塑性变形过程. 关键词： 广义层错能 广义孪晶能 体心立方金属钽 Ⅱ型裂纹     

α-Fe纯I型裂纹扩展中位错形成过程的三维分子动力学模拟

通过分子动力学方法模拟了三维 α-Fe I型裂纹的单向拉伸实验中的裂纹扩展过程。研究了在不同温度下裂纹扩展时位错的形成过程和断裂机理。计算结果表明,裂纹扩展过程是位错不断发射的过程。 裂纹尖端附近先形成无位错区和层错,当裂纹处应力增加到KI=0.566 MPam1/2时,裂纹尖端附近的某一层原子会逐渐分叉形成两层原子,分层后的原子层继续分离形成位错;当应力KI 达到0.669MPam1/2时第一个位错发射。随着温度的升高,临界应力强度因子逐渐降低,同时位错发射也相应地加快。     

α-Fe纯I型裂纹扩展中位错形成过程的三维分子动力学模拟

通过分子动力学方法模拟了三维 α-Fe I型裂纹的单向拉伸实验中的裂纹扩展过程。研究了在不同温度下裂纹扩展时位错的形成过程和断裂机理。计算结果表明,裂纹扩展过程是位错不断发射的过程。 裂纹尖端附近先形成无位错区和层错,当裂纹处应力增加到KI=0.566 MPam1/2时,裂纹尖端附近的某一层原子会逐渐分叉形成两层原子,分层后的原子层继续分离形成位错;当应力KI 达到0.669MPam1/2时第一个位错发射。随着温度的升高,临界应力强度因子逐渐降低,同时位错发射也相应地加快。     

钽、铁、钨三种体心立方金属裂纹的多尺度模拟及韧脆性分析

采用多尺度准连续介质法计算模拟了钽、铁、钨三种体心立方(body-centered-cubic,BCC)金属的I型裂纹断裂过程.观察了加载过程中裂纹尖端区域原子的位错、孪晶等塑性变形现象,以及裂纹的脆性开裂和扩展现象.模拟结果表明,不同BCC金属材料的裂纹在相同的加载下有不同韧脆性表现.在一定变形范围内,钽裂纹主要表现出的是裂纹尖端附近区域原子的位错和形变孪晶等塑性变形现象;铁裂纹在变形过程中先后表现出了塑性变形和脆性扩展现象,与实验结果吻合;钨裂纹在变形过程中则主要变现出脆性扩展现象.计算了三种金属材料的广义层错能曲线,得到其不稳定层错能;并分别用两种不同的韧脆性准则,对三种材料断裂模型的韧脆性行为进行分析,计算分析结果与模拟结果一致,从而验证了模拟结果的正确性.     

球形压头与单晶铝材料纳米接触过程的多尺度分析

采用准连续介质多尺度理论及排斥力场函数, 建立了刚性球形压头与单晶铝材料表面纳米接触与脱离过程的跨尺度分析模型, 得到载荷-位移响应曲线、原子变化状态图及位移云纹图. 研究了接触与脱离过程中单晶铝材料微观变形时原子的排列情况以及压 头形状对位错的形核和发射产生的影响. 从微观角度分析了接触变形机理. 结果表明, 随着接触深度的增加, 球形压头下部两侧的原子受力方向不断变化, 使得载荷-位移响应曲线出现不同于方形压头的阶梯状. 由于压头形状的影响, 压头两侧的密排原子面实现部分滑移形成了肖克利不完全位错. 脱离过程中, 原子紧贴压头向上移动, 实现部分弹性恢复, 残余位移为0.3 nm, 非常接近单晶铝单位位错的伯格斯矢量的 模0.285 nm. 关键词： 准连续介质法 球形压头 单晶铝材料 位错     

α-Fe裂纹的分子动力学研究

通过分子动力学方法，模拟了α-Fe裂纹的单轴拉伸实验中的形变过程.研究了不同晶体取向裂纹的形变特点和断裂机理，观察到各种形变现象，如位错形核和发射，位错运动，堆垛层错或孪晶的形成，纳米空洞的形成与连接等.计算结果表明，裂纹扩展是塑性过程和弹性过程相结合的过程，其中塑性过程表现为由裂尖发射的位错导致的原子切变行为，而弹性过程的发生则是由无位错区中的原子断键所导致.同时还研究了α-Fe裂纹的形变特点和断裂机理与温度场和应力场的依赖关系.     

弹性连续介质中氢致裂纹传播理论

弹性连续介质中的氢原子,在裂纹应力场的诱导下发生聚集,形成氢气团,本文计算了气团分布区平均氢浓度,并将该区看作沿裂纹尖端分布的弹性夹杂,确定了夹杂的本征应变,研究了夹杂的应力场P_ij对裂纹位错密度的影响,求得了裂纹尖端总的应力强度因子,认为氢脆机理是氢气团增大了裂纹尖端应力强度因子,最后还讨论了氢致开裂的物理过程及氢致裂纹扩展速率,所得结果与实验符合很好。 关键词：     

基于准连续介质方法模拟纳米多晶体Ni中裂纹的扩展

通过准连续介质方法模拟了纳米多晶体Ni中裂纹的扩展过程.模拟结果显示:裂纹尖端的应力场可以导致晶界分解、层错和变形孪晶的形成等塑性形变,在距离裂纹尖端越远的位置,变形孪晶越少,在裂纹尖端附近相同距离处,层错要远多于变形孪晶.这反映了局部应力的变化以及广义平面层错能对变形孪晶的影响.计算了裂纹尖端附近区域原子级局部静水应力的分布.计算结果表明:裂纹前端晶界处容易产生细微空洞,这些空洞附近为张应力集中区,并可能促使裂纹沿着晶界扩展.模拟结果定性地反映了纳米多晶体Ni中的裂纹扩展过程,并与相关实验结果符合得很好     

剪切作用下Cu(100)扭转晶界塑性行为研究

本文采用分子动力学方法研究了在剪切载荷作用下,Cu(100)扭转晶界对Cu柱屈服强度的影响.模拟结果发现,在加载过程中,低角度扭转晶界形成的位错网发生位错形核与扩展,位错之间的塞积作用提高了Cu柱的屈服强度;对于高角度扭转晶界,晶界发生滑动降低了Cu柱的屈服强度.同时发现,随着扭转角度的增加,Cu柱的屈服强度先增大,当扭转角度大于临界角度时,Cu柱的屈服应力逐渐减小.这表明剪切载荷作用下,两种不同的机理主导Cu柱的屈服,对于小于临界角度的扭转晶界,Cu柱的屈服由晶界位错形核和扩展机理主导,对于大于临界角度 关键词： 扭转晶界 分子动力学 位错形核 晶界滑移     

晶体相场法研究应力状态及晶体取向对微裂纹尖端扩展行为的影响

采用晶体相场模拟研究了单向拉伸作用下初始应力状态、晶体取向角度对单晶材料内部微裂纹尖端扩展行为的影响, 以(111)晶面上的预制中心裂纹为研究对象探讨了微裂纹尖端扩展行为的纳观机理, 结果表明: 微裂纹的扩展行为主要发生在<011>(111)滑移系上, 扩展行为与扩展方向与材料所处的初始应力状态及晶体取向紧密相关. 预拉伸应力状态将首先诱发微裂纹尖端生成滑移位错, 进而导致晶面解理而实现微裂纹尖端沿[011]晶向扩展, 扩展到一定程度后由于位错塞积, 应力集中, 使裂纹扩展方向沿另一滑移方向[101], 并形成锯齿形边缘; 预剪切应力状态下, 微裂纹尖端首先在[101]晶向解理扩展, 并诱发位错产生, 形成空洞聚集型长大的二次裂纹, 形成了明显的剪切带; 预偏变形状态下微裂纹尖端则直接以晶面解理形式[101]在上进行扩展, 直至断裂失效; 微裂纹尖端扩展行为随晶体取向不同而不同, 较小的取向角度会在裂纹尖端形成滑移位错, 诱发空位而形成二次裂纹, 而较大的取向角下的裂纹尖端则以直接解理扩展为主, 扩展方向与拉伸方向几近垂直.     

Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack

Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interfacial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip (shielding effect). The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.     

Effect of dislocation distribution in twin boundaries on the nucleation of microcracks at the twin tip

The effect of dislocation distribution in the boundaries of an arrested twin on the nucleation of microcracks at its tip is investigated. The twin is simulated by a double step pileup (cluster) of twinning dislocations located in adjacent slip planes. The equilibrium equations for dislocations are solved numerically. Clusters with different total numbers of dislocations and with different ratios of the numbers of dislocations at the upper and lower twin boundaries are considered. The formation of microcracks as a result of coalescence of head dislocations according to the force and thermally activated mechanisms is analyzed. The equilibrium configurations of a single twin boundary and of the twin are calculated. It is found that the condition for microcrack formation at the twin tip considerably depends on the ratio of the numbers of dislocations in twin boundaries. In the limit, this condition coincides with the condition of crack formation at the tip of a single twin boundary with the same total number of dislocations. It is shown that thermally activated formation of a microrack corresponds to lower values of the critical stress.     

Slow crack propagation in heterogeneous materials

Statistics and thermally activated dynamics of crack nucleation and propagation in a two-dimensional heterogeneous material containing quenched randomly distributed defects are studied theoretically. Using the generalized Griffith criterion we derive the equation of motion for the crack tip position accounting for dissipation, thermal noise, and the random forces arising from the defects. We find that aggregations of defects generating long-range interaction forces (e.g., clouds of dislocations) lead to anomalously slow creep of the crack tip or even to its complete arrest. We demonstrate that heterogeneous materials with frozen defects contain a large number of arrested microcracks and that their fracture toughness is enhanced to the experimentally accessible time scales.     

Interaction between infinitely many dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal

By means of analytic function theory, the problems of interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are studied. The analytic solutions of stress fields of the interaction between infinitely many parallel dislocations and a semi-infinite crack in one-dimensional hexagonal quasicrystal are obtained. They indicate that the stress concentration occurs at the dislocation source and the tip of the crack, and the value of the stress increases with the number of the dislocations increasing. These results are the development of interaction among the finitely many defects of quasicrystals, which possesses an important reference value for studying the interaction problems of infinitely many defects in fracture mechanics of quasicrystal.     

Dislocation Plasticity Effects on Interfacial Fracture

Analyses are reviewed where plastic flow in the vicinity of an interfacial crack is represented in terms of the nucleation and glide of discrete dislocations. Attention is confined to cracks along a metal-ceramic interface, with the ceramic idealized as being rigid. Both monotonic and fatigue loading are considered. The main focus is on the stress and deformation fields near the crack tip predicted by discrete dislocation plasticity, in comparison with those obtained from conventional continuum plasticity theory. The role that discrete dislocation plasticity can play in interpreting interface fracture properties in the presence of plastic flow is discussed.     

Shielding effect of a nano-circular inclusion acting on semi-infinite wedge cracks

The model of a screw dislocation near a semi-infinite wedge crack tip inside a nano-circular inclusion is proposed to investigate the shielding effect of nano inclusions acting on cracks. Utilizing the complex function method, the closed-form solutions of the stress fields in the matrix and the inclusion region are derived. The stress intensity factor, the image force, as well as the critical loads for dislocation emission are discussed in detail. The results show that the nano inclusion not only enhances the shielding effect exerted by the dislocation, but also provides a shielding effect itself. Moreover, dislocations may be trapped in the nano inclusion even if the matrix is softer than the inclusion. This helps the dislocation shield crack, and reduces the dislocation density within the matrix.     

Analytical estimation of dislocation distribution at the tip of arrested cracks

Computer simulation technique is used for studying the plastic flow at the tip of an arrested crack in lithium fluoride crystals. Two stages of the dislocation structure formation at the tip of a crack are analyzed: the formation of slip lines at the instant of crack arresting, and their evolution after sample unloading and partial healing of the crack. The size and the number of dislocations in a slip line are determined as functions of the loading force at the instant of crack arresting and on frictional stresses. It is shown that, during sample unloading and healing, some dislocations emerge at the plane of the crack under the action of mutual repulsion and image forces, so that the dislocation density attains its maximum value at a distance from the crack tip. A finite region free of dislocations exists in the immediate vicinity of the crack tip.     

裂纹顶端的异号位错和无位错区的象力理论

本文改进BCS型裂纹位错模型,并对裂纹顶端范性区的位错密度分布进行了计算。结果指出,在紧靠裂纹顶端的滑移面上出现和裂纹位错异号的位错。这些负号位错将移至裂纹顶端并使之钝化而留下一个无位错区或低位错密度区。本文对无位错区形成的象力理论进行了讨论。 关键词：     

Screw dislocations interacting with two asymmetrical interfacial cracks emanating from an elliptical hole

The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.