Nuclear Versus Side-Chain Bromination of 4-Methoxy Toluene by an Electrochemical Method

The electrochemical bromination of 4-methoxy toluene by two-phase electrolysis yields 3-bromo 4-methoxy toluene at first, which subsequently undergoes side-chain bromination to give 3-bromo 4-methoxy benzyl bromide as a final product in 86% yield. The two-phase electrolysis consists of 25–50% NaBr as aqueous electrolyte and CHCl₃ containing aromatic compound as organic phase. The reaction temperature is maintained at 10–25 °C. The probable orientation of bromine atom in an alkyl aromatic compound (nuclear versus side chain) is explained from the experimental result.     

Controlled Radical Polymerization Mediated by Amine–Bis(phenolate) Iron(III) Complexes

Tetradentate amine–bis(phenolate) iron(III) halide complexes containing chloro substituents on the aromatic ring are extremely efficient catalysts for controlled radical polymerization. Molecular weights are in good agreement with theoretical values and polydispersity indexes (PDIs) are as low as 1.11 for styrene and methyl methacrylate polymerizations. Complexes containing alkyl substituents on the aromatic ring are less efficient. Kinetic data reveal activity for styrene polymerization among the fastest reported to date and initial studies implicate a multimechanism system. Despite the highly colored polymerization media, simple work‐up procedures yield pure white polymers.     

选择性合成双[噻吩并[2,3-d]嘧啶-4(3H)-酮]

以2-氨基-4-三氟甲基-5-甲基-噻吩-3-羧酸乙酯(1)为起始原料制得膦亚胺2.在碳酸钾的催化下,膦亚胺2与芳基异氰酸酯和伯二胺的氮杂Wittig反应制得嘧啶环上2,2’取代的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]3;膦亚胺2与烷基异氰酸酯和伯二胺的氮杂Wittig反应制得嘧啶环上3,3’取代的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]4.化合物3的核磁共振氢谱表明关环反应在嘧啶环的2,2’位;化合物4的核磁共振氢谱表明关环反应在嘧啶环的3,3’位.对合成反应机理的推导及目标产物核磁共振氢谱数据的分析解释了此合成反应的选择性.     

3,4‐Bis(bromomethyl)thieno[2,3‐b]thiophene: Versatile Precursors for Novel Bis(triazolothiadiazines), Bis(quinoxalines), Bis(dihydrooxadiazoles), and Bis(dihydrothiadiazoles)

A synthesis of novel bis(triazolothiadiazines) 11 , 12 , 13 , 14 , bis(quinoxalines) 16 and 17 , bis(thiadiazoles) 24 and 25 , and bis(oxadiazole) 31 , which are linked to the thieno[2,3‐b]thiophene core via phenoxymethyl group, was reported. Thus, reaction of the bis(α‐bromoketones) 6 and 7 with the corresponding 4‐amino‐3‐mercapto‐1,2,4‐triazole derivatives 8 , 9 , 10 in ethanol–DMF mixture in the presence of a few drops of triethylamine as a catalyst under reflux afforded the novel bis(5,6‐dihydro‐s‐triazolo[3,4‐b]thiadiazines) 11 , 12 , 13 , 14 in 60–72% yields. The bis(quinoxalines) 16 and 17 were also synthesized as a sole product in high yields by the reaction of 6 and 7 with o‐phenylenediamine 15 in refluxing acetonitrile in the presence of piperidine as a catalyst. Cyclization of the bis(aldehyde thiosemicarbazones) 20 and 21 with acetic anhydride afforded the corresponding bis(4,5‐dihydro‐1,3,4‐thiadiazolyl) derivatives 24 and 25 in good yield. Bis(5‐phenyl‐2,3‐dihydro‐1,3,4‐oxadiazole) derivative 31 could be obtained in 67% yield by cyclization of the appropriate bis(N‐phenylhydrazone) 29 in refluxing acetic anhydride for 3 h.     

Expedient and High-Yield Synthesis of Alkylphos-Phonyl Bichlorides Under Mild,Neutral Conditions: Reaction of Bis(Trimethylsilyl)Alkyl Phosphonates with Oxalyl Chloride/Dimethylformamide

Structurally variant bis(trimethylsilyl)alkyl phosphonates were converted in high yields (80–88%, distilled) to the corresponding phosphonyl dichlor-ides upon reaction with (COCl)₂/DMF.     

Asymmetric Friedel–Crafts Alkylation of Electron‐Rich N‐Heterocycles with Nitroalkenes Catalyzed by Diphenylamine‐Tethered Bis(oxazoline) and Bis(thiazoline) ZnII Complexes

The asymmetric Friedel–Crafts alkylation of electron‐rich N‐containing heterocycles with nitroalkenes under catalysis of diphenylamine‐tethered bis(oxazoline) and bis(thiazoline)‐Zn^II complexes was investigated. In the reaction of indole derivatives, the complex of ligand 4 f with trans‐diphenyl substitutions afforded better results than previously published ligand 4 e with cis‐diphenyl substitutions. Excellent yields (up to greater than 99 %) and enantioselectivities (up to 97 %) were achieved in most cases. The complex of ligand 4 d bearing tert‐butyl groups gave the best results in the reactions of pyrrole. Moderate to good yields (up to 91 %) and enantioselectivities (up to 91 %) were achieved in most cases. The origin of the enantioselectivity was attributed to the NH–π interaction between the catalyst and the incoming aromatic system in the transition state. Such an interaction was confirmed through comparison of the enantioselectivity and the absolute configuration of the products in the reactions catalyzed by designed ligands.     

Bis(2,2'-bipyridyl)copper(II) permanganate (BBCP): A mild and versatile oxidant in organic synthesis

The preparation of bis(2,2'-bipyridyl)copper(II) permanganate (BBCP) is described. The reagent converts alcohols to the corresponding carbonyl compounds, α-hydroxy ketones to diketones, hydroquinone to p-benzoquinone, and compounds with benzylic double bonds to benzaldehyde in high yield. Benzophenone oxime, acetophenone oxime and various benzaldoximes are converted to the corresponding carbonyl compounds, aromatic amines to azo compounds, and benzylamine to benzaldehyde, usually in high yields, under mild condition.     

Synthesis of aromatic aldehyde acetals from (dibromomethyl)arenes

Zinc chloride-catalyzed double debromoalkoxylation of (dibromomethyl)arenes on treatment with trialkyl orthoformates resulted in the corresponding aromatic aldehyde acetals. On the first step, α-brominated ether is formed, which undergoes the second debromoalkoxylation producing acetal. This method is tolerated to ester functionalized derivatives.     

NaBF4催化合成二吲哚甲烷类化合物

在乙醇水溶液中,以Na BF4为催化剂,通过吲哚与芳香醛间的串联反应合成了二吲哚甲烷衍生物。考察了催化剂种类、反应介质、温度、反应时间等因素对反应的影响,在优化条件下以较高产率得到了一系列目标产物。     

Solvent directed electrophilic iodination and phenylselenenylation of activated alkyl aryl ketones

A mixture of molecular iodine and phenyliodine(III) bis(trifluoroacetate) (BTI) in CH₃CN (or CH₃OH) iodinates the aromatic ring of some activated alkyl aryl ketones. A different outcome results if PhSeSePh is used instead of I₂ in the presence of BTI. In CH₃CN the aromatic phenylselenenylation is still observed while in CH₃OH the formation of α-phenylseleno ketones occurs followed by the conversion of these intermediates into the corresponding α,α-dimethoxycarbonyl compounds, in moderate to good yields.     

Investigation of the one-pot synthesis of quinolin-2-(1H)-ones and the discovery of a variation of the three-component Ugi reaction

Rapid access to the quinolin-2-(1H)-one scaffold is afforded by a sequential 4 component Ugi–Knoevenagel condensation of an aminophenylketone, an aromatic aldehyde possessing electron donating moieties, cyanoacetic acid and an aliphatic isocyanide, in moderate to good yields (49–71%). Interestingly, when the reaction is performed using aromatic aldehydes bearing electron withdrawing moieties or isocyanides containing aromatic or ester units, a mixture of a quinolin-2-(1H)-one and an α-amino amide (Ugi three-component adduct) is afforded in varying ratios. Further when the reaction is performed utilizing a combination of an isocyanide-containing aromatic or carbonyl unit, and an aldehyde possessing an electron withdrawing functionality, the Ugi three-component adduct is exclusively afforded. In our hands this new variation of the Ugi 3CR proved to be efficient and robust affording analogues in good yields (51–70%).     

Synthesis of α,α′‐Bis(Substituted Benzylidene)Cycloalkanones Catalyzed by Amino‐Functionalized Ionic Liquid

Condensation of aromatic aldehydes with cyclopentanone and cyclohexanone using amino‐functionalized ionic liquid, 1‐aminoethyl‐3‐methyl tetrafluoroborate as solvent and catalyst was successfully performed for preparation of α,α′‐bis(substituted benzylidene)cycloalkanones. The catalyst can be recovered and reused for at least three times without apparently lose of activity. The process is simple, environmentally benign and proceeds in excellent yields.     

α‐Chymotrypsin‐Catalyzed Synthesis of Bis(indolyl)alkanes in Water

A novel methodology for the synthesis of bis(indolyl)methanes by the reaction of aromatic aldehydes and indole in water has been developed, and a series of desired products were obtained in moderate to excellent yields (from 65% to 97%) using 1.2 mg/mL α‐chymotrypsin as biocatalyst.     

Bis amide-aromatic-ureas—highly effective hydro- and organogelator systems

A series of hydro- and organo-supergelators have been synthesised via coupling of simple bis aromatic-ureas via alkyl amide linkages. These bis amide-aromatic-ureas exhibited reduced critical gelator concentrations, improved gelator stability, mechanical and dye removal properties for potential use in water purification, in comparison to related bis aromatic-ureas. Systematic structure studies via variation of the bis amide-aromatic-urea linker length as well as functionalization of the terminal aromatic moieties have enabled control over the gel properties.     

Efficient solvent-free synthesis of bis(indolyl)methanes on SiO<Subscript>2</Subscript> solid support under microwave irradiation

An efficient synthesis of bis(indolyl)methanes was developed. Bis(indolyl)methanes were synthesized starting from various aromatic aldehydes with indole under microwave irradiation and solvent-free conditions (85–98 %). Solid support SiO₂ was found to possess favorable catalytic and dispersancy parameters for the condensation reaction. Moreover, novel bis(indolyl)methanes containing an isoxazole ring were synthesized via this method in excellent yields (> 94 %) using 3-substituted isoxazole-5-carbaldehydes and indole.     

Synthesis of Rigid and Optically Active Bis(binaphthyl) Cyclic Compounds

Optically active cyclic bis(binaphthyl)s (4a–d), which are composed of aromatics, ethers, and ketonic carbonyls, were synthesized through a two‐step nucleophilic aromatic substitution reaction. Bis(binaphthyl) cyclic compounds (4a and 4b) were obtained in moderate yields when difluoride 3a and 3b were employed. On the other hand, bis(binaphthyl)s 4c and 4d were scarcely obtained when 3c and 3d were employed.     

Enantioselective Organocatalytic Addition of Oxazolones to 1,1‐Bis(phenylsulfonyl)ethylene: A Convenient Asymmetric Synthesis of Quaternary α‐Amino Acids

A new, easy, and highly enantioselective method for the synthesis of quaternary α‐alkyl‐α‐amino acids based on organocatalysis is reported. The addition of oxazolones to 1,1‐bis(phenylsulfonyl)ethylene is efficiently catalyzed by simple chiral bases or thioureas. The reaction affords α,α‐disubstituted α‐amino acid derivatives with complete C4 regioselectivity and with excellent yields and enantioselectivities. This methodology is complementary to previously reported enantioselective approaches to quaternary α‐amino acids and allows the synthesis of α‐phenyl‐α‐alkyl‐α‐amino acids and α‐tert‐butyl‐α‐alkyl‐α‐amino acids. It has distinct advantages in terms of operational simplicity, enviromentally friendly conditions, and suitability for large‐scale reactions.     

New poly (amide-imide) syntheses. IX. Preparation and properties of poly(amide-imide)s derived from 2,7-bis (4-aminophenoxy) naphthalene and various bis (trimellitimide)s

Eleven bis(phenoxy) naphthalene-containing poly(amide-imide)s IIIa–k were synthesized by the direct polycondensation of 2,7-bis (4-aminophenoxy) naphthalene (DAPON) with various aromatic bis (trimellitimide)s IIa–k in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly (amide-imide)s IIIa–k having inherent viscosities of 0.70–1.12 dL/g were obtained in quantitative yields. The polymers containing p-phenylene or bis(phenoxy) benzene units exhibited crystalline x-ray diffraction patterns. Most of the polymers were readily soluble in various solvents such as NMP, N, N-dimethylacetamide, dimethyl sulfoxide, m-cresol, o-chlorophenol, and pyridine, and gave transparent, and flexible films cast from DMAc solutions. Cast films showed obvious yield points in the stress-strain curves and had strength at break up to 87 MPa, elongation to break up to 11%, and initial modulus up to 2.10 GPa. These poly(amide-imide)s had glass transition temperatures in the range of 255–321°C, and the 10% weight loss temperatures were recorded in the range of 529–586°C in nitrogen. The properties of poly(amideimide)s IIIa–k were compared with those of the corresponding isomeric poly (amide-imide)s III′ prepared from 2,7-bis(4-trimellitimidophenoxy) naphthalene and aromatic diamines. © 1994 John Wiley & Sons, Inc.     

(Chiral) lithium–(magnesium–)zinc and lithium–cobalt combinations as dual reagents for aromatic deproto-metalation and aryl transfer to aldehydes

The deprotonating ability of mixed lithium–zinc or lithium–magnesium–zinc combinations containing amido and alkyl ligands in tetrahydrofuran were compared using anisole as substrate and iodine to quantitatively trap the formed arylmetal species. The results showed that the deprotonating ability is hampered if a Grignard reagent is employed to introduce the alkyl ligand, and is reduced when 2,2,6,6-tetramethylpiperidino ligands are replaced by less hindered/basic chiral amido or alkyls. Concerning the interception of the generated lithium–zinc aryl species by aldehydes, the presence of amido ligands leads to side reactions/lower yields, and no clear improvement was observed if lithium–magnesium–zinc aryl species are used. Racemic mixtures to very low enantioselectivities were noted when chiral amido ligands were incorporated in the composition of the bases.Still with enantioselective aryl transfer to aldehyde as purpose, the deprotonating ability of mixed lithium–cobalt combinations containing amido and alkyl ligands were compared using anisole as substrate and anisaldehyde to trap the formed arylmetal species. As before, the deprotonating ability is reduced when 2,2,6,6-tetramethylpiperidino ligands are replaced by less hindered/basic alkyls or chiral amido. The trapping step using aldehydes being in this case more efficient, even in the presence of amido ligands, the alcohols were obtained in higher yields. With recourse to a lower interception temperature, and using only bis[(R)-1-phenylethyl]amino as ligands, 32 and 22% yield, and 69 and 65% ee were obtained using, respectively, anisaldehyde and 3,4,5-trimethoxybenzaldehyde to intercept the metalated anisole.     

First Synthesis of Bis(di(indolyl)aryl)methanes From Bis(salicylaldehydes)

In this article, a simple method for the synthesis of bis(di(indolyl)aryl)methanes is described. The iodine‐catalyzed (5 mol %) reaction of indoles with various bis(salicylaldehyde) derivatives affords the bis(di(indolyl)aryl)methanes in excellent yields. The reaction works well under mild reaction condition with shorter reaction time.