Electromagnetically conducting elastic plates in a magnetic field: modeling and dynamic implications

The basic field equations and boundary conditions necessary for the dynamic approach of electromagnetically conducting flat plates subjected to an external magnetic field are derived.Whereas the structural equations include the geometrical non-linearities of elastic isotropic plates, the electromagnetic equations are used in a linearized form that is obtained from their non-linear counterpart by applying the small disturbance concept. In this context, it was shown that the governing equations involve the bending-stretching coupling arising from both the geometrical non-linear approach of the problem and the inclusion of the Lorentz ponderomotive forces that are reduced to a 2-D plate counterpart.A number of special cases are considered, implications of the external magnetic field on non-linear/linear eigenfrequencies are highlighted, and pertinent conclusions are outlined.     

铁磁薄板在磁场中变形和应力的理论分析与实验研究

在二维板壳磁弹性理论基本方程基础上,以二维铁磁薄板磁弹性问题为例,建立了含有10个基本未知量的偏微分方程组,再利用Newmark有限等差式,得到了可以应用DOM方法求解的标准型方程组.求解得到了载流铁磁薄板的位移及应力与各电磁量之间的关系,计算了载流铁板在磁场中的变形和应力.同时进行了载流铁磁性薄板在电磁场中变形和应力的实验研究,介绍了电磁场中铁磁性薄板的实验装置和实验方法,给出了实验数据,并将实验结果与理论计算结果进行了分析对比.     

Nonlinear stability and dynamics of composite skew plates under nonuniform loadings using differential quadrature method

The buckling, postbuckling and postbuckled vibration behaviour of composite skew plates subjected to nonuniform inplane loadings are presented here. The skew plate is modelled using first order shear deformation theory accounting for von-Kármán geometric nonlinearity and initial geometric imperfections. The different types of nonuniform loads that have been considered in this study are concentrated load, partial load and parabolic load. The explicit analytical expressions for prebuckling stress distributions within composite skew plate subjected to three different types of nonuniform inplane loadings are developed by solving plane elasticity problem using Airy's stress function approach. It is observed that the inplane normal stress distributions within the skew plate due to above nonuniform loadings do not become uniform even at mid-section. The generalized differential quadrature (GDQ) method is used to solve the nonlinear governing partial differential equations. It is observed that the postbuckled load carrying capacity of skew plate under concentrated loading is the lowest compared to other nonuniform and uniform loadings.     

Buckling and postbuckling of moderately thick plates

This paper gives the basic differential equations for finite deflections of elastic plates according to Reissner’s approximate stress distributions. The buckling and postbuckling problems of elastic rectangular plates, including the effect of transverse shear deformation, are solved and discussed, by using perturbation method suggested in ref. [8]. The postbuckling equilibrium paths of perfect and imperfect moderately thick rectangular plates are presented and compared with the results based on thin plate theory.     

Postbuckling of FGM plates with piezoelectric actuators under thermo-electro-mechanical loadings

A postbuckling analysis is presented for a simply supported, shear deformable functionally graded plate with piezoelectric actuators subjected to the combined action of mechanical, electrical and thermal loads. The temperature field considered is assumed to be of uniform distribution over the plate surface and through the plate thickness and the electric field considered only has non-zero-valued component E_Z. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and piezoelectric layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The initial geometric imperfection of the plate is taken into account. Two cases of the in-plane boundary conditions are considered. A two step perturbation technique is employed to determine buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, geometrically mid-plane symmetric FGM plates with fully covered or embedded piezoelectric actuators under different sets of thermal and electric loading conditions. The effects played by temperature rise, volume fraction distribution, applied voltage, the character of in-plane boundary conditions, as well as initial geometric imperfections are studied.     

Thermo-piezoelectric effects on the postbuckling of axially-loaded hybrid laminated cylindrical panels

IntroductionCompositelaminatedcylindricalpanelhasbeenusedextensivelyasastructuralconfiguration,mainlyintheaerospaceindustry .Oneoftherecentadvancesinmaterialandstructuralengineeringisinthefieldofsmartstructureswhichincorporatesadaptivematerials.Bytakingadvantageofthedirectandconversepiezoelectriceffects,piezoelectriccompositestructurescancombinethetraditionalperformanceadvantagesofcompositelaminatesalongwiththeinherentcapabilityofpiezoelectricmaterialstoadapttotheircurrentenvironment.Therefore…     

安全壳中钢衬壳热屈曲问题理论与实验研究(Ⅱ)──实验部分

钢衬壳热屈曲问题是核工程安全壳设计中的主要问题,但实验研究方面的文章发表得不多文中以200兆瓦核电站安全壳中钢衬壳为研究对象,采用局部1：1模型,测得了钢衬壳热屈曲温度和应变载荷,给出了钢衬壳屈曲和初始后屈曲过程中挠度和温度关系、以及膜应变和温度关系,实验测得钢衬壳具有局域屈曲的现象,实验屈曲载荷与理论结果符合较好     

Thermomechanical Postbuckling of Imperfect Moderately Thick Plates on Nonlinear Elastic Foundations*

ABSTRACT

A postbuckling analysis is presented for a moderately thick rectangular plate subjected to combined axial compression and uniform temperature loading, and resting on a softening nonlinear elastic foundation. The cases of (1) thermal postbuckling of initially compressed plates and (2) compressive post-buckling of initially heated plates are considered. The initial geometrical imperfections of the plates are taken into account. Formulations are based on Reissner-Mindlin plate theory, considering first-order shear deformation effects, and including plate-foundation interaction and thermal effects. The analysis uses a deflection-type perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples include the performance of perfect and imperfect, moderately thick plates resting on softening nonlinear elastic foundations. Typical results are presented in dimensionless graphical form.     

Buckling of a flush-mounted plate in simple shear flow

The buckling of an elastic plate with arbitrary shape flush-mounted on a rigid wall and deforming under the action of a uniform tangential load due to an overpassing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated for the buckled state resulting in a fourth-order partial differential equation with position-dependent coefficients parameterized by the Poisson ratio. The governing equation also describes the deformation of a plate clamped around the edges on a vertical wall and buckling under the action of its own weight. Solutions are computed analytically for a circular plate by applying a Fourier series expansion to derive an infinite system of coupled ordinary differential equations and then implementing orthogonal collocation, and numerically for elliptical and rectangular plates by using a finite-element method. The eigenvalues of the resulting generalized algebraic eigenvalue problem are bifurcation points in the solution space, physically representing critical thresholds of the uniform tangential load above which the plate buckles and wrinkles due to the partially compressive developing stresses. The associated eigenfunctions representing possible modes of deformation are illustrated, and the effect of the Poisson ratio and plate shape is discussed.     

Buckling and postbuckling of size-dependent cracked microbeams based on a modified couple stress theory

The elastic buckling analysis and the static postbuckling response of the Euler–Bernoulli microbeams containing an open edge crack are studied based on a modified couple stress theory. The cracked section is modeled by a massless elastic rotational spring. This model contains a material length scale parameter and can capture the size effect. The von Kármán nonlinearity is applied to display the postbuckling behavior. Analytical solutions of a critical buckling load and the postbuckling response are presented for simply supported cracked microbeams. This parametric study indicates the effects of the crack location, crack severity, and length scale parameter on the buckling and postbuckling behaviors of cracked microbeams.     

Postbuckling of piezoelectric FGM plates subject to thermo-electro-mechanical loading

In this paper, we examine the postbuckling behavior of functionally graded material FGM rectangular plates that are integrated with surface-bonded piezoelectric actuators and are subjected to the combined action of uniform temperature change, in-plane forces, and constant applied actuator voltage. A Galerkin-differential quadrature iteration algorithm is proposed for solution of the non-linear partial differential governing equations. To account for the transverse shear strains, the Reddy higher-order shear deformation plate theory is employed. The bifurcation-type thermo-mechanical buckling of fully clamped plates, and the postbuckling behavior of plates with more general boundary conditions subject to various thermo-electro-mechanical loads, are discussed in detail. Parametric studies are also undertaken, and show the effects of applied actuator voltage, in-plane forces, volume fraction exponents, temperature change, and the character of boundary conditions on the buckling and postbuckling characteristics of the plates.     

A nonlinear theory for doubly curved anisotropic sandwich shells with transversely compressible core

In the present paper, an advanced geometrically nonlinear shell theory of doubly curved structural sandwich panels with transversely compressible core is presented. The model is based on the adoption of the Kirchhoff theory for the face sheets and a second/third order power series expansion for the core displacements. The theory accounts for dynamic effects as well as for initial geometric imperfections. In the v. Kármán sense, large displacement theory is employed with respect to the transverse direction while the displacement gradients with respect to the tangential directions are assumed to be small. The equations of motion are derived by means of Hamilton’s principle and hold valid for all types of elastic and elastic–plastic material models. The theory is illustrated by an analysis of the elastic buckling and postbuckling behavior of flat and curved sandwich panels using an extended Galerkin scheme. Owing to the assumed transverse flexibility of the core, both the global and the local (face wrinkling) instability modes can be addressed.     

Coupled buckling and postbuckling analysis of active laminated piezoelectric composite plates

A theoretical framework for analyzing the pre- and postbuckling response of composite laminates and plates with piezoactuators and sensors is presented. The mechanics include nonlinear effects due to large rotations and stress stiffening, and are incorporated into a coupled mixed-field piezoelectric laminate theory. Using the previous mechanics, a nonlinear finite element method and an incremental-iterative solution are formulated for the analysis of nonlinear adaptive plate structures subject to in-plane electromechanical loading. A novel eight-node nonlinear plate finite element is also developed. Evaluation cases predict the buckling and postbuckling response of adaptive composite beams and plates with piezoelectric actuators and sensors. The case of piezoelectric buckling and postbuckling induced by the actuators is addressed and quantified. Finally, the possibility to actively mitigate the mechanical buckling and postbuckling response of adaptive piezocomposite plates is illustrated.     

非线性弹性基础上矩形板热后屈曲分析

给出非线性弹性基础上矩形板在均匀和非均匀（抛物型）热分布作用下的后屈曲分析。采用摄动——Ｇａｌｅｒｋｉｎ混合法给出完善和非完善矩形板热屈曲载荷和热后屈曲平衡路径。数值计算结果表明，非线性弹性基础上矩形板具有不稳定的热后屈曲平衡路径，且对初始几何缺陷是敏感的     

任意外型薄板非线性后屈曲问题的边界元解

本文就薄板后屈曲问题建立一组新型的边界元计算公式，用这组公式求解能方便处理各种边界问题，另外文中将面内应力分解成基本部份和附加部份，并利用微分算子分解理论导得了挠度的一个不同形式的基本解，由于计算公式中，实现了面内位移和挠度的解耦，从而使迭代过程得到简化，文末还对圆板后屈曲路径进行了计算，得到了满意的结果。     

Nonlocal thermal buckling and postbuckling of functionally graded graphene nanoplatelet reinforced piezoelectric micro-plate

This paper analyzes the nonlocal thermal buckling and postbuckling behaviors of a multi-layered graphene nanoplatelet(GPL) reinforced piezoelectric micro-plate. The GPLs are supposed to disperse as a gradient pattern in the composite micro-plate along its thickness. The effective material properties are calculated by the Halpin-Tsai parallel model and mixture rule for the functionally graded GPL reinforced piezoelectric(FG-GRP) micro-plate. Governing equations for the nonlocal thermal buckling a...     

Buckling of a pre-compressed or pre-stretched membrane in shear flow

Membranes enclosing capsules and biological cells undergo periodic compression and stretching due to an imparted hydrodynamic traction as they rotate in a shear flow. Compression may cause transient or permanent buckling manifested by the onset of wrinkled shapes. To study the effect of pre-compression and pre-stretching on the critical conditions for buckling, the response of an elastic circular plate flush mounted on a plane wall and deforming under the action of a uniform tangential load due to an over-passing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated resulting in a fourth-order partial differential equation with position-dependent coefficients parametrized by the Poisson ratio. Solutions are computed by applying Fourier series expansions to derive an infinite system of coupled ordinary differential equations, and then implementing orthogonal collocation. The solution space is illustrated, critical values for buckling are identified, the associated eigenfunctions representing possible modes of deformation are displayed, and the effect of the Poisson ratio is discussed.     

Kármán-type equations for a higher-order shear deformation plate theory and its use in the thermal postbuckling analysis

Kármán-type nonlinear large deflection equations are derived occnrding to the Reddy’s higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

Modified von Kármán equations for elastic nanoplates with surface tension and surface elasticity

In this paper, modified von Kármán equations are derived for Kirchhoff nanoplates with surface tension and surface tension-induced residual stresses. The simplified Gurtin-Murdoch model which does not contain non-strain displacement gradients in surface stress-strain relations is adopted, so that the von Kármán strain-compatibility equation can be expressed in terms of the stress function and deflection. The modified von Kármán equations derived here are different than the existing related models especially for elastic plates with in-plane movable edges. Unlike the existing models which predict a surface tension-induced tensile pre-stress for an elastic plate with in-plane movable edges, the present model predicts that this tensile pre-stress is actually cancelled by the surface tension-induced residual compressive stress. Our this result is consistent with recent clarification on similar issue for cantilever beams with surface tension, which implies that the existing models have incorrectly predicted an invalid tensile pre-stress for an elastic plate with in-plane movable edges which leads to significant overestimation of postbuckling load and free vibration frequencies. In addition, our numerical examples indicated that surface stresses can moderately increase or decrease postbuckling load and free vibration frequency of Kirchhoff nanoplate with all in-plane movable edges, depending on the surface elasticity parameters and the geometrical dimensions of nanoplates.