Synthesis and dichromate anion extraction ability of p-tert-butylcalix[4]arene diamide derivatives with different binding sites

The article describes the synthesis and evaluation of the dichromate anion (Cr₂O₇²⁻/HCr₂O₇⁻) extraction properties of p-tert-butylcalix[4]arene diamide derivatives (5-7) containing different binding sites. Among these compounds, 6 and 7 have been synthesized via aminolysis in a toluene-methanol solvent system with 3-aminomethylpyridine and 3,6-dioxa-1,8-diamino octane, respectively. On the other hand, compound 5 has been synthesized via an acid chloride method due to its inefficiency under aminolysis. The extraction properties of these diamides toward dichromate anions are studied by liquid-liquid extraction. The results show that p-tert-butylcalix[4]arene diamide derivative 7 exhibited a much higher affinity toward dichromate anions than that of 6 due to its special structure, while 5 was an ineffective ligand for these anions.     

Hydrogen ion-selective poly(vinyl chloride) membrane electrode based on a p-tert-butylcalix[4]arene-oxacrown-4

A hydrogen ion-selective poly(vinyl chloride) (PVC) membrane electrode was developed using p-tert-butylcalix[4]arene-oxacrown-4 as ionophore. Apart from the ionophore, plasticisers and lipophilic anions were blended, in various proportions, with PVC in tetrahydrofurane and mixtures so prepared were poured onto glass surfaces to form the membrane. 2-Nitrophenylpentylether has proved to be the best alternative as plasticiser and the lipophilic anions tried have turned out to have an adverse effect on the pH response. The electrode of the optimum characteristics had a composition of 2% p-tert-butylcalix[4]arene-oxacrown-4, 68.3% o-NPPE and 29.7% PVC. The electrode showed an apparent Nernstian response in the pH range 2-11 with a slope of 54.2±0.4 mV pH⁻¹ at 20±1 °C. It has a rapid potential-response to changes of pH, high ion selectivity towards lithium, sodium and potassium, and other characteristics comparable to those reported for the conventional pH glass membrane electrode. It appears to be a suitable potentiometric indicator electrode specifically for hydrofluoric acid solutions.     

Regioselective ipso formylation of p-tert-butylcalix[4]arene

A convenient procedure for direct introduction of one formyl group into p-tert-butylcalix[4]arenes through ipso substitution is described.     

6,6′-Bis(1,5-diazabicyclo[3.1.0]hexane)

The interaction of 1,3-diaminopropane with glyoxal and NaOCl in water at pH 9.5–10.5 afforded the previously unknown 6,6′-bis(1,5-diazabicyclo[3.1.0]hexane). According to X-ray diffraction data, both bicyclic fragments of the title compound adopt a boat conformation. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 623–625, March, 1999.     

Preparation and characterization of p-tert-butylcalix[8]arene bonded capillaries for open-tubular capillary electrochromatography

p-tert-Butylcalix[8]arene bonded capillaries for open-tubular capillary electrochromatography were prepared with γ-glycidoxypropyltrimethoxysilane as a bridge. The bonded capillary displayed low and steady electroosmotic flow (EOF) values over the pH range from 4 to 9. Detection limits for direct spectrophotometric detection at 277 nm for benzenediols (at a signal to noise ratio of 2) were 0.96 mg l⁻¹ for the unbonded capillary and 1.48 mg l⁻¹ for the bonded capillary, showing that the bonded layer did not show significant absorbance and hence decreased sensitivity. The bonded capillaries showed good separation selectivity for o-, m- and p-benzenediols, α- and β-naphthols, and α- and β-naphthylamines. This selectivity was attributed to significant interactions between the analytes and the bonded p-tert-butylcalix[8]arene, which contributed to the electrochromatographic separation mechanism. The bonded capillaries gave high stability and reproducibility.     

1,5-Diazabicyclo[3.1.0]hexanes and 1,6-diazabicyclo[4.1.0]heptanes: a new method for the synthesis,quantum-chemical calculations,and X-ray diffraction study

A new method was developed for the synthesis of 6-substituted 1,5-diazabicyclo[3.1.0]hexanes and 7-substituted 1,6-diazabicyclo[4.1.0]heptanes by condensation of N-monohalotrimethylene- and N-monohalotetramethylenediamines with carbonyl compounds in the presence of bases. X-ray diffraction studies and quantum-chemical B3LYP/6-31G* calculations demonstrated that the conformations of the resulting bicyclic systems are stabilized by stereoelectronic interactions. As a result, a boat conformation prevails in 1,5-diazabicyclo[3.1.0]hexanes, whereas the energies of chair, half-chair, and boat conformations of 1,6-diazabicyclo[4.1.0]heptanes are equalized.     

An improved synthesis of 2-(1,2,4-thiadiazol-5-yl)pyridine by interception of an intermediate involved in a competing cyclisation reaction

Reaction of thiopicolinamide with N,N′-dimethylformamide dimethyl acetal leads to the formation of 3-(dimethylamino)-1-methylthioimidazo[1,5-a]pyridine (3). However, the course of the reaction can be diverted to produce the title compound (1) in good yield by timely interception of the intermediate thioacylamidine (2).     

Synthesis and photochromic behavior of mono-, and biphotochromic system linked by p-phenylene bridge

<正>The synthesis of mono- and bis-l,3-diazabicyclo[3.1.0]hex-3-ene derivatives with indole ring and p-phenylene spacer,which behave as photochromic materials,is reported.The structure-photochromic behavior relationship(SPBR) of the synthesized compounds has been analyzed.     

Langmuir-Blodgett film of p-tert-butylthiacalix[4]arene modified glassy carbon electrode as voltammetric sensor for the determination of Hg(II)

The π-A isotherms and UV-vis spectra of the transferred films suggested that the monolayer of p-tert-butylthiacalix[4]arene can coordinate with Hg²⁺ at the air-water surface. From these observations, a glassy carbon electrode coated with Langmuir-Blodgett film of p-tert-butylthiacalix[4] arene as a new voltammetric sensor is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode and modified glassy carbon electrode using direct coating method, the Langmuir-Blodgett film-modified electrode can greatly improve the measuring sensitivity of Hg²⁺. Under the selected conditions, the Langmuir-Blodgett film-modified electrode in 0.1 mol L⁻¹ H₂SO₄ + 0.01 mol L⁻¹ KCl solution shows a linear voltammetric response for Hg²⁺ in the range of 5.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹, with a detection limit of 2.0 × 10⁻¹⁰ mol L⁻¹. The proposed method was also applied to determine Hg²⁺ in water samples (tap, lake and river water). In addition, the fabricated electrode exhibited a distinct advantage of simple preparation, non-toxicity, good reproducibility and good stability.     

p-tert-Butyl thiacalix[4]arenes functionalized at the lower rim by o-, m-, p-amido and o-, m-, p-(amidomethyl)pyridine fragments as receptors for α-hydroxy- and dicarboxylic acids

A series of new p-tert-butyl thiacalix[4]arenes with o-, m-, p-amido and o-, m-, p-(amidomethyl)pyridine substituents at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized. The ability of the obtained compounds to recognize the α-hydroxy (glycolic, tartaric) and dicarboxylic (oxalic, malonic, succinic, fumaric, and maleic) acids was investigated by UV-vis spectroscopy. Also, the efficiency and selectivity of binding, the association constants log K_a (10² to 10⁷ M⁻¹) and the stoichiometry were determined for the complexes of p-tert-butyl thiacalix[4]arenes with the acids. The receptors based on p-tert-butyl thiacalix[4]arenes with (amidomethyl)pyridine substitutes are most efficient in complexation in many cases.     

Guests inducing p-sulfonatocalix[4]arenes into nanocapsule and layer structure

Reaction of sodium p-sulfonatocalix[4]arene and TbCl₃ in the presence of 2,2′-bipyridine-N,N′-dioxide (bpdo) gives the 2:1 supramolecular nanocapsule [[Tb(bpdo)₂·4H₂O]³⁺?{p-sulfonatocalix[4]arene⁴⁻}₂], which further interacts with the [Tb(bpdo)₄]³⁺ through charge-assisted π-stacking interactions forming a channel structure 1. In further investigation, we tried to use the terpyridine-1,1′,1′-trisoxide (tpto) instead of bpdo. Although we failed to isolate a supramolecular capsules based on the tpto, lanthanide and p-sulfonatocalix[4]arene, a layer structure derived from p-sulfonatocalix[4]arene with an unusual [Cu(tpto)₂]²⁺ incorporation into the cavity of the calixarene and an outside [Cu(tpto)₂]²⁺ balancing the charge, has been obtained. Fluorescence spectra show clearly that compound 1 possesses the luminescence characteristics of Tb³⁺ and the ligand bpdo can sensitize Tb³⁺ ion. Gas sorption experiment shows the channel structure 1 has highly selective gas sorption properties for water and methanol.     

1,5-二氮杂双环[4,3,0]壬碳-5-烯与全氟炔酸酯的反应及其产物的核磁共振研究

1，5—二氮杂双环[4，3，0]壬碳—5—烯(DBN)与全氟炔酸酯反应生成成环化合物。通过对成环产物的^1HNMR、^13C NMR及相关的2D NMR谱的分析，确证了该类化合物的结构，并讨论了其化学位移及J-偶合特征。同时提出了整个反应可能的历程和机理。     

1-(N-Acylamino)alkyltriphenylphosphonium salts as synthetic equivalents of N-acylimines and new effective α-amidoalkylating agents

1-(N-Acylaminoalkyl)triphenylphosphonium salts 2a-f on reaction with DBU in MeCN are transformed into 1-(N-acylaminoalkyl)amidinium salts 3a-f. Amidinium salts 3d-f with a proton at the β-position undergo slow tautomerization into the corresponding enamides 6d-f. The same 1-(N-acylamino)alkyltriphenylphosphonium salts 2d-f in the presence of Hünig’s base are transformed directly into the corresponding enamides. Phosphonium salts 2, amidinium salts 3, and enamides 6 react with dialkyl malonates in the presence of DBU to give the corresponding amidoalkylation products. α-Amidoalkylation of dialkyl malonates is not observed in the presence of (i-Pr)₂EtN, yet proceeds well under these conditions with more acidic nucleophiles, for example, phthalimide or benzyl mercaptan.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Supramolecular self-assemblies of stereoisomers of p-tert-butyl thiacalix[4]arenes functionalized with hydrazide groups at the lower rim with some metal cations

Novel p-tert-butyl thiacalix[4]arenes functionalized with hydrazide groups at the lower rim in cone, partial cone and 1,3-alternate conformations were synthesized and their receptor properties toward metal ions of p- (Al³⁺, Pb²⁺) and d- (Fe³⁺, Co³⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺) elements were investigated by picrate extraction and dynamic light scattering (DLS). It was shown that the p-tert-butyl thiacalix[4]arenes functionalized with hydrazide groups are effective extractants of soft metal cations. The complex stoichiometry depended on the receptor configuration. All the p-tert-butyl thiacalix[4]arene derivatives with hydrazide fragments were able to form nanoscale aggregates but did not show self-association abilities.     

Reaction and sensing of octafluorocyclopentene with 1,5-diazabicyclo[4,3,0]non-5-ene

Reactions of octafluorocyclopentene (C₅F₈) with 1,5-diazabicyclo[4,3,0]non-5-ene (DBN) are studied by analyses of an isolated product and optical spectra from the viewpoint of applications to gas-sensors. Obtained results suggest that nucleophilic reactions of DBN proceed toward the double bond of C₅F₈ molecule accompanied with hydroxide anion attack on carbon-fluoride bonds of C₅F₈ moiety under ambients, forming unique C₅F₈-modified adducts. The present reaction is conducive to a new type of technologies for quick and selective sensing that can be used to develop alarm systems in the field of the environment and etching processing factories.