Detection of steroids with molybdovanadophosphoric acids on thin-layer chromatograms

Two vanadium analogues of phosphomolybdic acid, H₄[PMo₁₁VO₄₀] and H₄[PMo₁₀V₂O₄₀], have been studied for use as detection reagents for steroids on thin-layer plates. They were found to produce characteristic colors with steroids after spraying and heating at 105 °C.     

Synthesis and Characterization of H3PW12O40 and H3PMo12O40 Nanoparticles by a Simple Method

In this study H₃PW₁₂O₄₀·9H₂O and H₃PMo₁₂O₄₀·6H₂O (HPA) particles were changed into nano forms by heat-treatment in an autoclave as a simple, repaid, inexpensive and one step method. The particle size of these nanoparticles was around 25 nm. The as-synthesized nanostructures were characterized by dynamic light scattering, X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and inductively coupled plasma analyzer. Thermal stability of nanoparticles was surveyed by thermal gravimeter analyse. Acidity of prepared nanoparticles was investigated by pyridine adsorption method. Results showed rising acidity by declining particle size of HPA.     

Synthesis of Nano‐Sized Zinc Oxide Photocatalyst by Combustion Method

The objective of this research was to use combustion synthesis to create a nano‐sized ZnO photocatalyst using citric acid as the fuel and zinc nitrate as the oxidant. The starting materials were mixed in a stoichiometric ratio, and a slurry precursor with high homogeneity was formed. The precursor was ignited at room temperature, resulting in dry, loose, and voluminous ZnO powders. The powders, characterized by SEM, TEM and XRD, showed a particle size range of 40 to 80 nm with a wurtzite structure. The ZnO powders were introduced as a photocatalyst for the degradation of methyl orange, which was adopted as a model compound. UV light (6W) was used as the irradiation source to induce synthesized ZnO powders to perform catalytic activity. The photocatalytic reaction was executed in 40 mL of a 10 ppm methyl orange aqueous solution under 254 nm UV illumination. In this work, it was observed that both UV light and ZnO powders are needed for the photocatalytic reaction. In addition, it was found that increasing the amount of ZnO powder present in the MO (methyl orange‐C₁₄H₁₄N₃NaO₃S) solution did not correlate directly with an increase in photocatalytic ability. It was found that the scattering problem of UV light also needs to be considered. The optimized photocatalytic degradation ratio in this work reached 92.7%.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

The Catalytic Performance of Preyssler's Anion, [NaP5W30O110]14−, in the Oxidation of Benzyl Alcohols

Under mild conditions, monosubstituted benzyl alcohols were oxidized to benzaldehydes and benzoic acids in the presence of sodium 30-tungstopentaphosphate (Preyssler's anion), [NaP₅W₃₀O₁₂₀]^14? , and hydrogen peroxide as an oxidant. This polyanion with high hydrolytic stability (pH = 0–12), high thermal stability, and high acidic strength shows good activities. The effects of various parameters on the yield of the products, including a catalyst type, a nature of the substitutents, and temperature, were studied. Comparison between Keggin's heteropolyacids, H₃[PW₁₂O₄₀], H₃[PMo₁₂O₄₀], H₄[SiW₁₂O₄₀], and H₄[SiMo₁₂O₄₀], and Preyssler's anion shows that this polyanion reacts similar to Keggin's acids whitout any degradation of the structure.     

Synthesis of ZnO nanoparticles and its application in photocatalytic degradation of LABS by the trial-and-error and Taguchi methods

In the work ZnO nanoparticles were prepared by sol-gel method. The catalyst was characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM). The photocatalytic oxidation of anionic surfactant in detergent industries was studied using ZnO nanoparticles with diameter size 20 nm as catalyst on irradiation with UV light. Analysis of kinetic showed that the amount of surfactant photocatalytic degradation can be fitted with pseudo-first-order model and studied photochemical elimination of Linear alkyl benzene sulfonates by the trial-and-error and Taguchi methods. Our experimental design consisted of testing five factors, i.e. dosage of K₂S₂O₈, concentration of surfactant, amount of ZnO, irradiation time, and initial pH. The results showed that photocatalytic degradation of linear alkyl benzene sulfonates was strongly influenced by these parameters.     

Different morphologies of ZnO nanostructures via polymeric complex sol–gel method: synthesis and characterization

Various morphologies of ZnO nanostructures, such as nanoparticles, nanorods and nanoflowers have been achieved controllably by polymeric sol–gel method. In this approach, zinc nitrate Zn(NO₃)₂·6H₂O, citric acid and ethylene glycol were used as the source of Zn²⁺, the chelating agent and the solvent agent, respectively. The microstructure of the ZnO nanostructures was characterized by X-ray diffractometry, scanning electron microscopy with the energy dispersive X-ray spectroscopy, transmission electron microscopy, thermogravimetric analysis and Fourier transform infrared spectroscopy. The effect of ethylene glycol to citric acid mole ratio on the morphology and structure of the products was discussed. The ZnO nanoparticles with diameter between 24 ± 2 nm was obtained with EG:CA mole ratio equal to 2:1. The optical properties of as-obtained power were investigated by ultraviolet–visible spectroscopy.     

Effect of adding H2SO4 and NaCl TO palladium-containing catalysts on the results of methane oxidation at 220°C

A study has been made of the interaction of methane at 220°C with silica gel-supported complexes of palladium(II), Na_n H_9-n[PMo₆V₆O₄₀], H₉[PMo₆V₆O₄₀], H₃[PMo₁₂O₄₀], NaCl, and with added sulfuric acid. Competition between electrophilic and chloride pathways is examined. Additions of Na⁺ and Cl^– direct the reaction along the chloride pathway, leading to the formation of CH₃Cl. Without NaCl, the electrophilic mechanism is realized, the main product of which is CO₂.L. M. Litvinenko Institute of Physical-Organic Chemistry and Coal Tar Chemistry, National Academy of Sciences of the Ukraine, 70 R. Luxembourg Street, Donetsk 340114, Ukraine. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 32, No. 2, pp. 92–96, March–April, 1996. Original article submitted June 30, 1995.     

Enhancement of 2-chlorophenol photocatalytic degradation in the presence Co<Superscript>2+</Superscript>-doped ZnO nanoparticles under direct solar radiation

The performance of Co²⁺-doped ZnO nanoparticles, prepared using the sol–gel method, for 2-chlorophenol degradation under direct solar radiation was investigated. Various parameters were investigated during the degradation process, namely solar intensity, Co²⁺ ion concentration, loading concentrations of Co²⁺-doped ZnO, and pH. The photocatalytic degradation efficiency increased when the initial concentration of 2-chlorophenol decreased; the optimum concentration was 50 mg/L under similar experimental conditions. Moreover, optimum values, established on a sunny day, were 0.75 wt% of Co²⁺, a 1 g/L loading concentration, and a pH of 6.0, respectively. The highest degradation efficiency observed was 95 %, after only 90 min of solar light irradiation. The mechanism of visible photocatalytic degradation using Co²⁺-doped ZnO was explained as a strong electronic interaction between Co²⁺, Co³⁺ and ZnO, and a promotion in the charge separation, which enhanced the degradation performance. The fragmentation of 2-chlorophenol under the optimal conditions was investigated using HPLC, comparing standards of all intermediate compounds. The pathway of the fragmentation was proposed as involving hydroxyhydroquinone, catechol, and phenol formation, which were then converted to non-toxic compounds such as oxalic acid and acetic acid with further decomposition to CO₂ and H₂O.     

ZnO修饰提升花状BiOBr的可见光催化降解罗丹明B性能

以Bi(NO₃)₃·5H₂O、Zn(CH₃COO)₂·2H₂O和NaBr为前驱体,采用简单溶剂热法制备BiOBr/ZnO三维花状微纳米复合材料。采用X射线衍射、扫描电子显微镜、X射线光子能谱、N₂吸附-脱附、光致发光和电子顺磁共振等分析技术对其理化性质进行了表征。通过可见光催化降解罗丹明B(RhB)的实验测试了复合材料的光催化性能。结果表明ZnO含量为5%的BiOBr/ZnO光催化活性最优,RhB降解率在50 min后达到98.3%,其降解速率常数是纯ZnO和BiOBr的6.3倍和3.4倍,并且具有较高的稳定性。复合材料光催化性能增强的可能原因为ZnO的引入增强了可见光的吸收和光生载流子的电荷分离效率。     

室温一步固相反应合成纳米氧化锌的表征、光催化性能及动力学

以七水硫酸锌、氢氧化钠为原料,采用室温一步固相反应合成ZnO纳米粒子,并分别利用X射线衍射分析（XRD）、傅里叶变换红外光谱分析（FTIR）、热重分析（TG）、扫描电子显微分析（SEM）、透射电子显微分析（TEM）、N₂吸附-脱附、紫外可见漫反射光谱分析（UV-Vis DRS）等方法对ZnO纳米粒子进行表征。实验结果表明：不需任何添加剂,室温下可通过一步固相反应合成ZnO纳米粒子,其形成过程首先是ZnSO₄·7H₂O和NaOH充分接触,然后反应形成Zn₄SO₄（OH）₆·5H₂O,最后NaOH的溶解热可使Zn₄SO₄（OH）₆·5H₂O转变为ZnO并逐渐长大形成纳米粒子。同时以甲基橙为降解对象评价了ZnO纳米粒子的光催化活性,实验结果表明：紫外光照射下,该方法合成的ZnO纳米粒子对甲基橙具有较好的光催化活性,且光催化动力学方程符合准一级反应动力学。     

Hydrothermal syntheses, crystal structures, and properties of two polyoxometalates [Cd(2,2′-bpy)3]2[PMoVMoVI 11O40] and [H3PMo12O40]·3(4,4′-bpy)·4H2O

Two Keggin-type phosphododecamolybdate compounds [Cd(2,2′-bpy)₃]₂[PMo^VMo^VI ₁₁O₄₀] (1) and [H₃PMo₁₂O₄₀]·3(4,4′-bpy)·4H₂O (2) (bpy=bipyridine) were prepared by the hydrothermal method for the first time and characterized by elemental analyses, X-ray single-crystal diffraction, ESR spectra, and IR spectra, showing that compound 1 consists of a mixed valence Keggin polyanion [PMo^VMo^VI ₁₁O₄₀]⁴⁻ and two isolated coordinated cations [Cd(2,2′-bpy)₃]²⁺, while compound 2 is an intermolecular compound based on organic substrate 4,4′-bpy and heteropoly acid unit H₃PMo₁₂O₄₀. Furthermore, both the compounds show strong photoluminescence properties in the solid state at room temperature. The catalytic activities of the two compounds were also determined by the oxidation of benzaldehyde to benzoic acid using H₂O₂ as oxidant in a liquid–solid triphase system.     

Molybdovanadophosphoric Acid Catalyzed Oxidation of Hydrocarbons by H2O2 to Oxygenates

Heteropoly acids of the general formula H_3+x[PMo_12-xV_xO₄₀] (where x = 1,2,3) catalyzed the oxidation of aromatic hydrocarbons at 65°C with H₂O₂ to give oxygenated products. Among the catalysts, H₄[PMo₁₁VO₄₀] was found to be a more active catalyst and its activities have been reported in the oxidation of cyclohexane, methyl cyclohexane, naphthalene, 1-methyl naphthalene and biphenyl.     

Investigations on the surface modification of ZnO nanoparticle photocatalyst by depositing Pd

In this paper, ZnO nanoparticle photocatalysts were modified by depositing Pd on their surfaces with a photoreduction method. We mainly investigated the modification mechanisms as well as the effects on the photocatalytic activity of ZnO nanoparticles of deposited Pd by means of XPS and SPS (Surface Photovoltage Spectroscopy), and the effects of Pd content on SPS responses were also discussed from the point of the electronic energy level. The results showed that the content of crystal lattice oxygen on the surface of ZnO nanoparticle decreased after an appropriate amount of Pd was deposited, while that of adsorbed oxygen increased, indicating that Pd was mainly deposited on the crystal lattice oxygen. At the same time, the intensity of SPS responses of ZnO nanoparticles remarkably decreased. In addition, the activity of ZnO nanoparticles could be greatly improved by depositing an appropriate amount of Pd in the gas phase photocatalytic oxidation of n-C₇H₁₆. Thus, it could be concluded that the increase in surface content of adsorbed oxygen could facilitate the photocatalytic reaction, and there were close relationships between the SPS response and photocatalytic activity, i.e. the weaker the SPS response, the higher the photocatalytic activity, of Pd-deposited ZnO nanoparticles.     

Catalytic effect of lucunary heteropolyanion containing molybdenum and tungsten atoms on decolorization of direct blue 71

In this research,a lucunary Keggin structure,[PMo₂W₉O₃₉]^7- was selected as an efficient homogenous catalyst for degradation of an azo dye（direct blue 71） and a simple method was developed for degradation of DB71.The method is based on the oxidation of azo dye in the presence of a lucunary Keggin form of polyoxometalates,K₇[PMo₂W₉O₃₉]? 19H₂O,as a homogenous catalyst at room temperature.The reaction is monitored spectrophotometrically by measuring the absorbance of dye atλ=585 nm.Some parameters including concentration of catalyst,concentration of H₂O₂,pH and reaction time were investigated and optimized. Results show that K₇[PMo₂W₉O₃₉]? 19H₂O is more efficient in the presence of hydrogen peroxide.Degradation of dye in the presence of the catalyst and H₂O₂ could lead to the disappearance approximately 65%of dye after 60 min.But degradation for the same experiment performed in the absence of catalyst or in the absence of H₂O₂ was 22%or 5%respectively.Approximately 87% azo dyes has been eliminated after 90 min in the presence of catalyst,H₂O₂ and optimize conditions(0.6 g/L of K₇[PMo_2- W₉O₃₉H₉H₂O,0.08 mol/L hydrogen peroxide and room temperature).     

Phosphomolybdate-doped-poly(3,4-ethylenedioxythiophene) coated gold nanoparticles: Synthesis,characterization and electrocatalytic reduction of bromate

Phosphomolybdate, H₃PMo₁₂O₄₀, (PMo₁₂)-doped-poly(3,4-ethylenedioxythiophene) (PEDOT) coated gold nanoparticles have been synthesized in aqueous solution by reduction of AuCl₄⁻ using hydroxymethyl EDOT as a reducing agent in the presence of polystyrene sulfonate and PMo₁₂. The resulting PMo₁₂-doped-PEDOT stabilized Au nanoparticles are water soluble and have been characterized by UV–visible spectroscopy, scanning electron microscopy and electrochemistry. Glassy carbon electrodes modified with these Au nanoparticles show excellent stability and catalytic activity towards the reduction of bromate in an aqueous electrolyte solution containing 10 mM H₂SO₄ and 0.1 M Na₂SO₄.     

ZnO nanopowders and their excellent solar light/UV photocatalytic activity on degradation of dye in wastewater

Low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O nanopowders(NPs)would determine their practical application in purifying wastewater.In this contribution,ZnO NPs were scalably synthesized via the simple reaction of Zn powder with H_2O vapor in autoclave.The structural,morphological and optical properties of the samples were systematically characterized by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectra,transmission electron microscopy,Micro-Raman,photoluminescence,and ultraviolet-visible spectroscopy.The as-prepared Zn O NPs are composed of nanoparticles with 100–150 nm in diameter,and have a small Brunauer-Emmett-Teller surface area of 6.85 m~2/g.The formation of Zn O nanoparticles is relative to the peeling of H_2 release.Furthermore,the product has big strain-stress leading to the red-shift in the band gap of product,and shows a strong green emission centered at 515 nm revealing enough atomic defects in Zn O NPs.As a comparison with P25,the obtained dust gray Zn O NPs have a strong absorbance in the region of 200–700 nm,suggesting the wide wave-band utilization in sunlight.Based on the traits above,the Zn O NPs show excellent photocatalytic activity on the degradation of rhodamine B(Rh-B)under solar light irradiation,close to that under UV irradiation.Importantly,the Zn O NPs could be well recycled in water due to the quick sedimentation in themselves in solution.The low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O NPs endow themselves with promising application in purifying wastewater.     

Controlled synthesis of monodisperse sub-100 nm hollow SnO2 nanospheres: a template- and surfactant-free solution-phase route, the growth mechanism, optical properties, and application as a photocatalyst

Controlled synthesis of low‐dimensional materials, such as nanoparticles, nanorods, and hollow nanospheres, is vitally important for achieving desired properties and fabricating functional devices. We report a systematic investigation of the growth of low‐dimensional sub‐100 nm SnO₂ hollow nanostructures by a mild template‐ and surfactant‐free hydrothermal route, aiming to achieve precise control of morphology and size. The starting materials are potassium stannate and urea in an ethylene glycol (EG)/H₂O system. We found the size of the SnO₂ hollow nanospheres can be controlled by simply adjusting the urea concentration. Investigation of the mechanism of formation of the SnO₂ hollow nanospheres revealed that reaction time, urea concentration, and reaction temperature make significant contributions to the growth of hollow nanospheres. On switching the solvent from EG/H₂O to H₂O or ethanol, the SnO₂ nanostructures changed from nanospheres to ultrafine nanorods and nanoparticles. On the basis of reaction parameter dependent experiments, oriented self‐assembly and subsequent evacuation through Ostwald ripening are proposed to explain the formation of hollow nanostructures. Their size‐dependent optical properties, including UV/Vis absorption spectra and room‐temperature fluorescence spectra, were also studied. Moreover, the studies on the photocatalytic property demonstrate that the fabricated hollow structures have slightly enhanced photocatalytic degradation activity for rhodamine B when exposed to mercury light irradiation compared to solid SnO₂ nanospheres under the same conditions. The synthesized tin oxide nanoparticles display high photocatalytic efficiency and have potential applications for cleaning polluted water in the textile industry.     

Superior Photostability and Photocatalytic Activity of ZnO Nanoparticles Coated with Ultrathin TiO2 Layers through Atomic‐Layer Deposition

Atomic‐layer deposition (ALD) is a thin‐film growth technology that allows for conformal growth of thin films with atomic‐level control over their thickness. Although ALD is successful in the semiconductor manufacturing industry, its feasibility for nanoparticle coating has been less explored. Herein, the ALD coating of TiO₂ layers on ZnO nanoparticles by employing a specialized rotary reactor is demonstrated. The photocatalytic activity and photostability of ZnO nanoparticles coated with TiO₂ layers by ALD and chemical methods were examined by the photodegradation of Rhodamine B dye under UV irradiation. Even though the photocatalytic activity of the presynthesized ZnO nanoparticles is higher than that of commercial P25 TiO₂ nanoparticles, their activity tends to decline due to severe photocorrosion. The chemically synthesized TiO₂ coating layer on ZnO resulted in severely declined photoactivity despite the improved photostability. However, ultrathin and conformal ALD TiO₂ coatings (≈0.75–1.5 nm) on ZnO improved its photostability without degradation of photocatalytic activity. Surprisingly, the photostability is comparable to that of pure TiO₂, and the photocatalytic activity to that of pure ZnO.     

Construction,PPy loading and photocatalytic performance of a polyoxometalate-templated metallacycle compound

A polyoxometalate-templated metallacycle compound, [Ag₆trz₆][H₃PMo₁₂O₄₀]₂·6H₂O (trz = 1,2,3-triazole), has been isolated and structurally characterized. The compound represents the first example of a trigonal antiprism based metal-organic framework (MOFs) with complicated Zr₆Br₁₂ type topology, in which the trigonal antiprisms as building blocks are constructed by the Ag₆trz₆ space polygons and the bifunctional POMs (both as template and building block). In addition, to improve the photocatalytic activity of polyoxometalate-templated metallacycle compound, polypyrrole was loaded on its surface through a chemical oxidation polymerization process in situ. Finally, the photocatalytic activity of [Ag₆trz₆][H₃PMo₁₂O₄₀]₂ and PPy@[Ag₆trz₆][H₃PMo₁₂O₄₀]₂ under visible light was explored, and the results demonstrate that the PPy loading on the surface of POMs-based hybrid compound is feasible to improve their photocatalytic performance.