含4，4＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征

含４，４＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征董德文，韩平，倪玉山，丁孟贤，韩伟（中国科学院长春应用化学研究所长春１３００２２）（吉林化工学院化工系吉林）关键词　热致液晶，共聚酯，向列型，二羟基二苯酮关于热致液晶芳香族聚酯的研究已有大量的报道...     

SYNTHESIS AND AVERAGE SEQUENCE LENGTH DETERMINATION OF AROMATIC-ALIPHATIC COPOLYESTERS CONTAINING POLY(ALKYLENE OXALATE) UNITS

Two series of aromatic-aliphatic random copolyesters(PEBTOXS)with diverse diol ratios have been synthesized by direct melting polycondensation.Two kinds of diols(glycol(EG)and 1,4-butanediol(BD))are used in combination in order to adjust crystallization and tensile properties,and three kinds of diacids(dimethyl terephthalate(DMT),diethyl oxalate(DEOX),and sebacic acid(SA))are involved.~1H-NMR spectra quantify both composition and structure,and show that the final contents in copolyesters appropriate to t...     

热致液晶共聚酯的熔融行为及结晶结构研究

采用ＤＳＣ及ＷＡＸＤ手段对含对羟基苯甲酸热致液晶共聚酯的相变行为及结晶结构进行了初步研究。结果表明，聚合物中存在两种同属于正交晶系的不同堆积形态结晶结构，在相变上表现为双重熔融峰。     

The phase behavior of fluorinated diols,divinyl adipate and a fluorinated polyester in supercritical carbon dioxide

The use of supercritical carbon dioxide as a reaction medium for polyester synthesis is hindered by the low solubility of diols in CO₂. However, it has been previously demonstrated that fluorinated compounds can exhibit greater miscibility with carbon dioxide than their hydrocarbon analogs. Therefore, the phase behavior of fluorinated diols and divinyl adipate (DVA), an activated diester, in supercritical carbon dioxide has been investigated at 323 K. The phase behavior of equimolar mixtures of DVA with the most carbon dioxide-soluble diol, 3,3,4,4,5,5,6,6-octafluorooctan-1,8-diol (OFOD), was also determined. The solubility of a polyester synthesized from DVA and 2,2,3,3-tetrafluoro-1,4-butanediol (TFBD) was found to be less CO₂-soluble than its monomers. DVA was much more soluble in CO₂ than any of the fluorinated diols, therefore, no attempt was made to fluorinate the DVA structure. Because both substrates and polyester product were soluble in carbon dioxide, the enzymatic synthesis of a fluorinated polyester from DVA and octafluorooctandiol was performed in supercritical carbon dioxide, resulting in a polymer with a weight average molecular weight of 8232 Da.     

ABA triblock copolyesters composed of poly(l-lactide) A hard blocks: A comparative study of amorphous and crystalline aliphatic polyesters as B soft blocks

In this article, two series of ABA triblock copolyesters composed of poly(l-lactide) A hard blocks and odd-odd aliphatic polyesters as B soft midblock were prepared and compared by various techniques. The results showed that the block structures could be formed without any detectable transesterification, and the composition and molecular weight of the triblock copolyesters could be well controlled by adjusting the feeding ratio of l-lactide monomer to the polyester macroinitiator. It was found that the thermal properties, crystal structure, and spherulitic morphology of the triblock copolyesters depended on the composition and block length. The impact of amorphous and crystalline midblocks on the mechanical properties was compared and discussed. The triblock copolyesters composed of crystalline midblock showed similar ultimate stress and elongation, but higher tensile modulus and yield stress, in comparison with analogous containing amorphous midblock. The triblock copolyester composed of short PLLA hard block and amorphous aliphatic polyester soft midblock displayed typical elastomeric behavior without yield, which is a promising aliphatic polyester thermoplastic elastomer.     

Synthesis and characterization of chiral liquid‐crystalline polyesters containing sugar‐based diols via melt polymerization

Liquid‐crystalline (LC) polyesters based on hexanediol or butanediol, dimethyl 4,4′‐biphenyldicarboxylate, and a sugar‐based diol, isosorbide or isomanide, were prepared with conventional melt polymerization. ¹H NMR spectroscopy confirmed that 50 mol % of the charged sugar diol was successfully incorporated into various copolyesters. Modest molecular weights were obtained, although they were typically lower than those of polyester analogues that did not contain sugar‐based diols. Thermogravimetric analysis demonstrated that the incorporation of isosorbide or isomanide units did not reduce the thermal stability in a nitrogen atmosphere. Melting points that ranged from 190 to 270 °C were achieved as a function of the copolyester composition. The lined focal conic fan textures, typical indications of a chiral smectic C LC phase, were observed upon the shearing of the LC melt under polarized light microscopy. Atomic force microscopy revealed that the twisted molecular orientation in the chiral LC phase induced periodically soft lamellar structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2512–2520, 2003     

含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6冠醚环液晶共聚酯的合成与表征

以4,4-′(α,ω-辛二酰氧)二苯甲酰氯(M1)、2,5-双[4-′(对癸氧基苯基)苯甲酰氧基]对苯二酚(M2)和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6(M3)为单体,通过溶液共缩聚反应,合成了一系列新的含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6冠醚环的主链型液晶共聚酯.单体1(M1)由对羟基苯甲酸和辛二酰氯,通过酯化和取代反应制备,单体2(M2)由2,5-二羟基苯醌和对癸氧基苯基苯甲酰氯通过酯化和还原反应制备,单体3(M3)由顺式-二氨基二苯并-18-冠-6和苯酚通过重氮化和偶联反应制备.共聚酯的分子量不高,[η]在0.30~0.39之间.单体的化学结构通过IR、UV1、H-NMR、MS和元素分析等方法确证.共聚酯的外观为黄色粉状固体,除共聚酯CP9外,室温下不溶于CHCl3和THF溶剂.共聚酯的性质采用GPC、[η]、DSC、TG、WAXD和POM等方法进行了研究,发现所有的共聚酯加热到各自的熔融温度以上都能形成液晶态,在液晶态可以观察到近晶相和向列相的典型织构.共聚酯的熔融温度(Tm)和各向同性温度(Ti)随共聚酯分子中顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6用量的改变呈规律性变化.WAXD研究进一步证实了共聚酯的液晶性.     

Synthesis and characterization of fully biobased poly(propylene succinate‐ran‐propylene adipate). Analysis of the architecture‐dependent physicochemical behavior

Fully biobased aliphatic random poly(1,3‐propylene succinate‐ran‐1,3‐propylene adipate) (PPSA) copolyesters with high molar mass were synthesized with different macromolecular architectures based on various succinic acid/adipic acid (SA/AA) molar ratio, by transesterification in melt. Titanium (IV) isopropoxide was used as an effective catalyst. All synthesized copolyesters were fully characterized by different chemical and physicochemical techniques including NMR, size exclusion chromatography, FTIR, wide angle X‐ray scattering, differential scanning calorimetry, and thermogravimetric analysis. The final copolyesters molar compositions were identical to the feed ones. The different sequences based on succinate and adipate segments were randomly distributed along the chains. All the corresponding copolyesters showed an excellent thermal stability with a degradation onset temperature higher than 290 °C, which increased with the adipate content. According to their compositions and architectures, PPSA copolyesters can exhibit or not a crystalline phase, at room temperature. T_g of copolyesters decreased with the adipate content due to the decrease in the chains mobility, following the Gordon–Taylor relation. PPSA showed a pseudo eutectic melting behavior characteristic of an isodimorphic character. Finally, PPSA copolyesters were not able to crystallize during the cooling or the second heating run, due to the 1,3‐propanediol chemical structure, which led to amorphous materials with the exception of the polyester based solely on AA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2738–2748     

Thermotropic copolyesters of a series of aromatic diols with phenylterephthalic acid and 4,4′-oxybisbenzoic acid

Wholly aromatic, liquid crystalline, main chain copolyesters derived from various linearly substituted aromatic diols with mixtures of 2-phenylterephthalic acid and a nonlinear aromatic dicarboxylic acid, 4,4′-oxybisbenzoic acid, were prepared by acidolysis condensation polymerization reactions and characterized for their liquid crystalline properties. The formation of a liquid crystalline phase at elevated temperatures was not prevented by the introduction of up to 50 mol % of the nonlinear diacid in the copolymers, and all of those copolyesters exhibited nematic liquid crystalline phases. Furthermore, the inclusion of a nonlinear monomer was not as effective as was the presence of a phenyl substituent in decreasing the melting transition of these copolymers. All of the copolymers had high glass transition temperatures and high thermal stabilities. © 1993 John Wiley & Sons, Inc.     

New polymer synthesis. LXXXIII. Synthesis of chiral and cholesteric polyesters from silylated “sugar diols”

A series of polycondensation was conducted with the purpose to optimize the reaction conditions for the polycondensation of silylated 2,3-isopropylidene D -threitol with a dicarboxylic acid dichloride. Polycondensation in o-dichlorobenzene or 1-chloronaphthalene at 180–230°C were found to be most satisfactory. Trifluoroacetic acid/H₂O allow an easy cleavage of the isopropylidene group without hydrolysis of the polyester. Ten cholesteric copolyesters were prepared by polycondensation of mixtures of silylated methylhydroquinone and isosorbide, isomannide, or 2,3-isopropylidene threitol with the dichloride of 1,10-bis(4′-carboxyphenoxy)decane. All these copolyesters form a broad cholesteric phase above 200°C. The copolyesters containing 5 or 10 mol % of a sugar diol display a blue Grandjean texture. © 1996 John Wiley & Sons, Inc.     

A comparative study on transreactions induced phase changes in blends of poly(trimethylene terephthalate) and poly(ethylene naphthalate) upon annealing

By using wide-angle X-ray diffraction (WAXD), thermal analysis, scanning and optical microscopy, and nuclear magnetic resonance (NMR) analyses, this study has demonstrated that blends of two semicrystalline polyesters, poly(trimethylene terephthalate) and poly(ethylene naphthalate) (PTT/PEN), were initially immiscible in as-blended state. The process of blend phase/morphology changes upon extended heating/annealing at elevated temperatures was monitored and probed. With reactions induced at heating/annealing at high temperatures (300°C) for long enough times, the original two phases quickly merged into a single phase. NMR analyses have shown that the products of the transreactions are identified as the random copolyesters (termed as EN-TT). From the NMR results, statistical analyses revealed that the average sequence lengths decreased upon heating, and the degree of chain randomness increased with time of heating at the fixed temperature. Upon extended heating, all PTT and PEN chains could be fully transformed into random copolymers of higher randomness with only a single but amorphous phase. Results are compared to another blend system comprised of PEN and a homologous polyester, PPT, of different structure. Influence of polyester structure on transreactions and phase homogenization process is analyzed.     

序列结构对液晶共聚酯性能的影响

本文通过熔融酯交换和Schottern-Baumann缩聚反应合成了两类组成相同而序列结构不同的基于对羟基苯甲酸、对苯二甲酸和二元酚的三元共聚酯,用热台偏光显微镜、DSC和X-射线衍射,较详细地研究了序列结构对液晶相类型、转变温度和固态结构等的影响。结果表明,无规共聚酯较规则共聚酯的熔化温度普遍降低;但序列结构的差异并不改变液晶相类型,规则共聚酯和无规共聚酯均为热致向列型液晶,两类共聚酯固态结构的差异可用结构单元的相似性进行解释。     

Synthesis and Characterization of Fumarate Copolyesters for Use in Bioresorbable Bone Cement Compositions

Unsaturated amorphous copolyesters of varied composition were prepared by transesterification copolymerization of diethyl fumarate, and two diols, 1,2‐propanediol and 2‐methyl‐1,3‐propanediol. The copolyesters were characterized by IR, ¹H‐ and ¹³C‐NMR, GPC, DSC, and TGA. The glass transition is changing with composition from 0°C to 19°C as the content of 1,2‐propanediol residue in the copolyester increases. The copolyester structure and composition have an impact on the compressive strength and hydrolytic stability of the composites prepared by crosslinking the fumarate double bonds with N‐vinyl pyrrolidone in the presence of inorganic filler, calcium sulfate dihydrate, with the addition of a radical initiator, benzoyl peroxide, at ambient temperatures.     

Origin of miscibility‐induced sequential reordering and crystallization‐induced sequential reordering in binary copolyesters: a Monte Carlo simulation

The effect of the repulsive interaction between the components of binary copolyesters on their sequence order was investigated with the Monte Carlo simulation method. The phase separation and ester‐interchange reactions were implemented simultaneously with a kind of one‐site bond fluctuation model. When the repulsive interaction energy was applied to the binary copolyesters, miscibility‐induced sequential reordering (MISR) was induced. The more repulsive the pair interaction was, the higher the sequence order was. During the MISR process, homoester‐interchange reactions became more favorable because of the repulsive interaction, accompanying the decrease of the interactional free energy. The sequence order resulting from MISR was independent of the relative trial ratio of phase separation to ester‐interchange reaction at a given value of interaction energy. Restoration of the sequence distribution was also simulated with and without the repulsive interaction between the components of the binary copolyesters to investigate the effect of MISR on the crystallization‐induced sequential reordering (CISR) process in binary copolyesters, where sequences with lengths longer than 6 were assumed to crystallize and could not take part in ester‐interchange reactions. The sequence distribution in the amorphous phase was restored via ester‐interchange reactions. When the repulsive interaction was applied to binary copolyesters during the CISR process, restoration of the sequence distribution was accelerated, indicating that MISR can accelerate the CISR process when a polyester blend shows upper critical solution temperature behavior. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1337–1347, 2001     

Novel copolyesters containing naphthalene structure. I. From bis(hydroxyalkyl)naphthalate and bis[4-(2-hydroxyethoxy)aryl] compounds

Copolyesters containing naphthalene structure were synthesized from bis(hydroxyethyl)naphthalate (BHEN) or bis(hydroxybutyl)naphthalate (BHBN) and various aralkyloxy diols. The starting bis[4-(2-hydroxyethoxy)aryl] compounds were derived from a nucleophilic substitution of various bisphenols with ethylene carbonate in the presence of KI. Copolyesters having intrinsic viscosities of 0.45–0.60 dL/g were obtained by the melt polycondensation in the presence of metallic catalysts. The effect of reaction temperature and time on the formation of copolyesters were investigated to obtain an optimum condition for copolyesters manufacturing. Most copolyesters have better solubilities than polyethylene naphthalate (PEN) or polybutylene naphthalate (PBN) in aprotic solvents, such as N-methyl-2-pyrrolidone or m-cresol. The thermal properties of the copolyesters were investigated by the differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Glass transition temperatures (T_g) of copolyesters result from BHEN were in the range of 90–141°C, and 10% weight loss in nitrogen were all above 460°C. Another series of copolyesters result from BHBN have T_g in the range of 75–135°C, and 10% weight loss in nitrogen of over 420°C. © 1996 John Wiley & Sons, Inc.     

Terephthalic Acid Copolyesters Containing Tetramethylcyclobutanediol for High-Performance Plastics

There is a need for high-performance applications for terephthalic acid (TPA) polyesters with high heat resistance, impact toughness, and optical clarity. Bisphenol A (BPA) based polycarbonates and polyarylates have such properties, but BPA is an endocrine disruptor. Therefore, new TPA polyesters that are less hazardous to health and the environment are becoming popular. Tetramethylcyclobutanediol (TMCD) is a difunctional monomer that can be polymerized with TPA and other diols to yield copolyesters with superior properties to conventional TPA polyesters. It has a cyclobutyl ring that makes it more rigid than cyclohexanedimethanol (CHDM) and EG. Thus, TMCD containing TPA copolyesters can have high heat resistance and impact strength. TPA can be made from abundantly available upcycled polyethylene terephthalate (PET). Therefore, this review discusses the synthesis of monomers and copolyesters, the impact of diol composition on material properties, molecular weight, effects of photodegradation, health safety, and substitution of cyclobutane diols for future polyesters.     

Copolyesters of glycols and bisphenols: Concurrent reactions of a new preparative process

A mechanism for the preparation of copolyesters from a preformed polyester, diacid, and bisphenol diacetate in the melt phase is described. Utilizing copoly(ethylene:4,4′-isopropylidenediphenylene 50:50 2-methylisophthalate) as a model system, the reaction is shown to proceed through simultaneous cleavage of the preformed polyester by diacid, polymerization by condensation of carboxyl and bisphenol acetate groups, and equilibration through polyester cleavage by carboxyl polymer ends. In this model system, the rates of cleavage and polymerization are competitive, which results in a random sequence distribution early in the reaction.     

Synthesis of reactive copolyesters derived from isophthaloyl chloride,bisphenol a,and aliphatic diols with additional reactive groups

Copolycondensation of isophthaloyl chloride, bisphenol A, and aliphatic diols with additional reactive groups were performed in the presence of triethylamine by a trimethyl phosphate/cyclohexane organic/organic interfacial method. The composition of idol and bisphenol A residues in the resulting copolyesters is very close to that in the feed from the initial stage of reaction. The resulting copolyesters with reactive groups can be used for the preparation of various functional polymers. The mechanism of an organic/organic interfacial polycondensation was also discussed. © 1995 John Wiley & Sons, Inc.     

Copolyesters of glycols and bisphenols: A new preparative process

A new process for the preparation of copolyesters of glycols and bisphenols is described. Employing a preformed polyester, an acid, and a bisphenol diacetate, the procedure is useful for a variety of copolyesters. It is illustrated with the preparation of copolyterephthalates of ethylene glycol and 4,4′-isopropylidenediphenol. The reaction is proposed to proceed by an initial cleavage of the polyester, followed by polymerization of the acid- and acetate-terminated products. Intermediate heterogeneous structures then equilibrate.     

STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS——POLY (ARYLENE TEREPHTHALATE-CO-BUTYLENE TEREPHTHALATE)

A series of copolyesters based on bis(4-hydroxybutyl) terephthalate, terephthaloyl chloride andvarious aromatic diols (i.e. hydroquinone, chlorohydroquinone, bromohydroquinone or dihydroxybi-phenyl) was prepared. ~1H-NMR studies revealed that the monomer units had microstructures closeto random distribution in the chains. The copolymers showed composition-dependent liquid crystal-line properties as verified by visual observation of stir opalescence, polarizing microscope, DSC andX-ray diffration. The copolyesters with aromatic diol contents over a certain extent (for chloro-hydroquinone m≥0.33) were thermotropic with wide liquid crystalline temperature ranges. Theintroduction of chlorohydroquinone into the copolyesters could gradually destroy the crystallinityof the polymers but retain the liquid crystalline characteristics.