Pressure effect on structural,electronic and thermodynamic investigations of europium filled skutterudite EuFe4Sb12: LDA and LSDA approximations

Numerical calculations based on the full potential muffin-tin orbitals method (FP-LMTO) within the local density approximation (LDA) and the local spin-density approximation (LSDA) to investigate the structural, electronic and thermodynamic properties of filled skutterudite EuFe₄Sb₁₂ are presented. The electronic band structure and density of states profiles prove that this material is a conductor. The present investigation is also extended to the elastic constants, such as the bulk modulus B, anisotropy factor A, shear modulus G, young's modulus E, Poisson's ratio ν, and the B/G ratio with pressure in the range of 0–40 GPa. The sound velocities and Debye temperatures are also predicted from the above constants. The variations of the primitive cell volume, expansion coefficient α, bulk modulus B, heat capacity (C_p and C_v), Debye temperature θ_D, Helmholtz free energy A, Gibbs free energy G, entropy S, and internal energy U with pressure and temperature in the range 0–3000 K are calculated successfully.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

Structural,elastic, electronic and thermal properties of M2SbP (M = Ti,Zr and Hf)

The structural, elastic, electronic and thermal properties of M₂SbP (M = Ti, Zr and Hf) were studied by means of a pseudo-potential plane-wave method based on the density functional theory within both the local density approximation and the generalised gradient approximation. The optimised zero-pressure geometrical parameters, i.e. the two unit cell lengths (a, c) and the internal coordinate (z), were in good agreement with available experimental and theoretical data. The effect of high pressure, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than along c-axis. The anisotropic independent elastic constants were calculated using the static finite strain technique. Numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature for ideal polycrystalline M₂SbP aggregates were performed in the framework of the Voigt–Reuss–Hill approximation. The calculated band structures show that all studied materials are electrical conductors. Analysis of the atomic site projected densities showed that the bonding is of covalent–ionic nature with the presence of metallic character. The density of states at the Fermi level is dictated by the transition metal d–d bands; the Sb element has little effect. Thermal effects on some macroscopic properties of M₂SbP were predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the volume expansion coefficient, heat capacity and Debye temperature with pressure and temperature in the ranges 0–50 GPa and 0–2000 K were obtained successfully.     

The structural, elastic and thermodynamic properties of thorium tetraboride

The structural, elastic and thermodynamic properties of thorium tetraboride (ThB₄) have been investigated by using first-principles plane-wave pseudopotential density functional theory with generalized gradient approximation. The behaviors of structural parameters under 0-70 GPa hydrostatic pressure are studied by means of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) geometry optimization scheme. By using the stress-strain method, single crystal elastic constants are calculated to test the mechanical stability of the crystal structure and to determine mechanical properties such as bulk modulus at each pressure. However, in order to study the thermodynamic properties of ThB₄, the quasi-harmonic Debye model is used. Then, the dependencies of bulk modulus, heat capacities, thermal expansions, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range 0-70 GPa and temperature range 0-1500 K.     

A first-principle study of the structural, elastic, lattice dynamical and thermodynamic properties of PrX (X=P, As)

The structural, phase transition, elastic, lattice dynamic and thermodynamic properties of rare-earth compounds PrP and PrAs with NaCl (B1), CsCl (B2), ZB (B3), WC (B_h) and CuAu (L1₀) structures are investigated using the first principles calculations within the generalized gradient approximation (GGA). For the total-energy calculation, we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab-initio Simulation Package (VASP). Specifically, some basic physical parameters, e.g. lattice constants, bulk modulus, elastic constants, shear modulus, Young's modulus and Poison's ratio, are predicted. The obtained equilibrium structure parameters are in excellent agreement with the experimental and theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacity and Debye temperature are calculated in wide pressure and temperature ranges. The phonon dispersion curves and corresponding one-phonon density of states (DOS) for both compounds are also computed in the NaCl (B1) structure.     

The structural, elastic and thermodynamic properties of intermetallic compound CeGa2

The structural, elastic and thermodynamic characteristics of CeGa₂ compound in the AlB₂ (space group: P6/mmm) and the omega trigonal (space group: P-3m1) type structures are investigated using the methods of density functional theory within the generalized gradient approximation (GGA). The thermodynamic properties of the considered structures are obtained through the quasi-harmonic Debye model. The results on the basic physical parameters, such as the lattice constant, the bulk modulus, the pressure derivative of bulk modulus, the phase-transition pressure (P _t ) from P6/mmm to P-3m1 structure, the second-order elastic constants, Zener anisotropy factor, Poisson’s ratio, Young’s modulus, and the isotropic shear modulus are presented. In order to gain further information, the pressure and temperature-dependent behavior of the volume, the bulk modulus, the thermal expansion coefficient, the heat capacity, the entropy, Debye temperature and Grüneisen parameter are also evaluated over a pressure range of 0–6 GPa and a wide temperature range of 0–1800 K. The obtained results are in agreement with the available experimental and the other theoretical values.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.     

Ab initio studies of the structural,elastic, electronic and thermal properties of NiTi2 intermetallic

First principles calculations were performed in the framework of the density functional theory (DFT) using the Full Potential–Linear Augment Plane Wave method (FP–LAPW) within the generalized gradient approximation (GGA) to predict the structural, electronic, elastic and thermal properties of NiTi₂ intermetallic compound. By using the Wien2k all-electron code, calculations of the ground state and electronic properties such as lattice constants, bulk modulus, presure derivative of bulk modulus, total energies and density of states were also included. The elastic constants and mechanical properties such as Poisson’s ratio, Young’s modulus and shear modulus are estimated from the calculated elastic constants of the single crystal. Through the quasi-harmonic Debye model, the preasure and temperature dependences of the linear expansion coefficient, bulk modulus and heat capacity have been investigated. Finally, the Debye temperature has been estimated from the average sound velocity according to the predicted polycrystal bulk properties and from the single crystal elastic constants.     

Elastic and thermodynamic properties of c-BN from first-principles calculations

The elastic constants and thermodynamic properties of c-BN are calculated using the first-principles plane wave method with the relativistic analytic pseudopotential of the Hartwigen, Goedecker and Hutter (HGH) type in the frame of local density approximation and using the quasi-harmonic Debye model, separately. Moreover, the dependences of the normalized volume V/V₀ on pressure P, as well as the bulk modulus B, the thermal expansion α, and the heat capacity C_V on pressure P and temperature T are also successfully obtained.     

Predictions of mechanical and thermodynamic properties of Mg17Al12 and Mg2Sn from first-principles calculations

Using first-principles calculations, we predict mechanical and thermodynamic properties of both Mg₁₇Al₁₂ and Mg₂Sn precipitates in Mg–Al–Sn alloys. The elastic properties including the polycrystalline bulk modulus, shear modulus, Young’s modulus, Lame’s coefficients and Poisson’s ratio of both Mg₁₇Al₁₂ and Mg₂Sn phases are determined with the Voigt–Reuss–Hill approximation. Our results of equilibrium lattice constants agree closely with previous experimental and other theoretical results. The ductility and brittleness of the two phases are characterized with the estimation from Cauchy pressure and the value of B/G. Mechanical anisotropy is characterized by the anisotropic factors and direction-dependent Young’s modulus. The higher Debye temperature of Mg₁₇Al₁₂ phase means that it has a higher thermal conductivity and strength of chemical bonding relative to Mg₂Sn. The anisotropic sound velocities also indicate the elastic anisotropies of both phase structures. Additionally, density of states and Mulliken population analysis are performed to reveal the bonding nature of both phases. The calculations associated with phonon properties indicate the dynamical stability of both phase structures. The temperature dependences of thermodynamic properties of the two phases are predicted via the quasi-harmonic approximation.     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

The structural, elastic and thermodynamical properties of zinc-blend structure InN from first principles

A theoretical study of the structural, elastic and thermodynamic properties of the cubic zinc-blende (ZB) structure InN are presented in this paper by performing first principles calculations within local density approximation. The values of lattice constant, bulk modulus and its pressure derivatives and elastic constants are in excellent agreement with the available experimental data and other theoretical results. It is found that the ZB structure InN should be unstable above 20 GPa mechanically. The pressure and temperature dependencies of the bulk modulus, the heat capacity and the thermal expansion coefficient and the entropy S, as well as the Grüneisen parameter are obtained by the quasi-harmonic Debye model in the ranges of 0-1500 K and 0-25 GPa.     

Theoretical investigations of structural, elastic and thermodynamic properties for PtN2 under high pressure

We have investigated structural and elastic properties of PtN₂ under high pressures using norm-conserving pseudopotentials within the local density approximation (LDA) in the frame of density-functional theory. Calculated results of PtN₂ are in agreement with experimental and available theoretical values. The a/a₀, V/V₀, ductility/brittleness, elastic constants C_ij, shear modulus C′, bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio σ and anisotropy factor A as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also study thermodynamic properties of PtN₂. The thermal expansion versus temperature and pressure, thermodynamic parameters X (X=Debye temperature or specific heat) with varying pressure P, and heat capacity of PtN₂ at various pressures and temperatures are estimated.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

First-principles calculations for elastic properties of OsB2 under pressure

The structure, elastic properties and elastic anisotropy of orthorhombic OsB₂ are investigated by density functional theory method with the ultrasoft pseudopotential scheme in the frame of the generalized gradient approximation (GGA) as well as local density approximation (LDA). The obtained structural parameters, elastic constants, elastic anisotropy and Debye temperature for OsB₂ under pressure are consistent with the available experimental data and other theoretical results. It is found that the elastic constants, bulk modulus and Debye temperature of OsB₂ tend to increase with increasing pressure. It is predicted that OsB₂ is not a superhard material from our calculations.     

First-principles calculations on structural, elastic, electronic, optical and thermal properties of CsPbCl3 perovskite

The structural, elastic, electronic, optical and thermal properties of the semiconductor perovskite CsPbCl₃ were investigated using the pseudo-potential plane wave (PP-PW) scheme in the frame of generalized gradient approximation (GGA) and local density approximation (LDA). The computed lattice constant agrees reasonably with experimental and theoretical ones. The CsPbCl₃ crystal behaves as ductile material. The valence bands are separated from the conduction bands by a direct band gap R-R. We distinguished hybridization between Pb-p states and Cl-p states in the valence bonding region. Under compression at P=30 GPa, this material will have a metallic character. The thermal effect on the lattice constant, bulk modulus, Debye temperature and heat capacity C_V was predicted using the quasi-harmonic Debye model. To the author's knowledge, most of the studied properties are reported for the first time.     

Elastic,mechanical, electronic properties and hardness of Nb2AsC from first principles

The study aims at the elastic, mechanical, electronic properties and hardness of Nb₂AsC using first principles based on the density functional theory method within the generalised gradient approximation. The calculated lattice parameters of Nb₂AsC are in good agreement with the experimental data. The five independent elastic constants are firstly calculated as a function of pressure, and our results indicate that it is mechanically stable in the applied pressure. The elastic anisotropy is examined through the computation of the direction dependence of Young's modulus. The pressure dependences of the bulk modulus, shear modulus, average velocity of acoustic waves and Debye temperature of Nb₂AsC are systematically investigated. The band structure and density of states are discussed, and the results show that the strong hybridisations C p–Nb d and As p–Nb d would be beneficial to the structure stability of Nb₂AsC. Based on the Mulliken population analysis, the hardness of Nb₂AsC is predicted.     

Elastic,electronic and thermodynamic properties of fluoro-perovskite KZnF3 via first-principles calculations

The elastic, electronic and thermodynamic properties of fluoro-perovskite KZnF₃ have been calculated using the full-potential linearized augmented plane wave (FP-LAPW) method. The exchange-correlation potential is treated with the generalized gradient approximation of Perdew-Burke-Ernzerhof (GGA-PBE). Also, we have used the Engel and Vosko GGA formalism (GGA-EV) to improve the electronic band structure calculations. The calculated structural properties are in good agreement with available experimental and theoretical data. The elastic constants C _ij are calculated using the total energy variation with strain technique. The shear modulus, Young’s modulus, Poisson’s ratio and the Lamé coefficients for polycrystalline KZnF₃ aggregates are estimated in the framework of the Voigt-Reuss-Hill approximations. The ductility behavior of this compound is interpreted via the calculated elastic constants C _ij . Electronic and bonding properties are discussed from the calculations of band structure, density of states and electron charge density. The thermodynamic properties are predicted through the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variation of bulk modulus, lattice constant, heat capacities and the Debye temperature with pressure and temperature are successfully obtained.