β-萘磺酸掺杂聚苯胺纳米粒子的固相反应法制备及其表征

利用固相反应法制备了 β 萘磺酸掺杂的聚苯胺纳米粒子 ,并以红外光谱 (FTIR) ,扫描电子显微镜(SEM) ,透射电镜 (TEM) ,X 射线衍射 (XRD)以及粉末微电极等测试方法对其进行了表征 .结果表明 ,固相反应法合成的 β 萘磺酸掺杂聚苯胺粒子直径为 30～ 5 0nm ,聚苯胺分子链排列有序 ,晶化率较好 .粉末微电极的循环伏安测试表明 ,β 萘磺酸掺杂聚苯胺有较好的电化学活性 .     

Preparation of oriented titanium phosphate and tin phosphate/polyaniline hybrid films by electrochemical deposition

The preparation of hybrid films of metal (Ti and Sn) phosphate nanosheets and polyaniline by simultaneous electrophoretic and electrolytic deposition was performed in an acetonitrile solvent. Emeraldine polyaniline was intercalated between the phosphate nanosheets with a monolayer arrangement. The obtained hybrid films were several tens of micrometers in thickness. The ratio of incorporated polyaniline to metal phosphate in the hybrid films reaches to around 0.45 and 0.30 at suitable concentrations of tetrabutylammonium hydroxide (TBAOH). These amounts correspond with occupancy of polyaniline in the interlayer gallery of several tens percent. Fractions of voids in a horizontal direction were around 22 and 1% in titanium phosphate/polyaniline and tin phosphate/polyaniline hybrid films, respectively. Thus, anodic electrodeposition makes it possible to form thick films of intercalation compounds of alpha-titanium and tin phosphates with polyaniline. These hybrid films were examined for redox activity. The cyclic voltammetry results of these films confirmed that the hybrid films have redox activity by polyaniline. For these voltammograms, the maximum current was observed in the tin phosphate/polyaniline hybrid deposited for 15 min. The redox activity of these hybrids possibly depends on the mesoscopic texture of the film, especially on the amount of voids in a horizontal direction.     

Synthesis,Characterization and Electrochemical Behavior of p-NiO/n-TiO2/Polyaniline Composites

The p-NiO/n-TiO2/polyaniline composites were synthesized via in situ polymerization of aniline. The structure and morphology of the composites were characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), Fourier transform infrared spectroscopy(FTIR) and UV-Vis absorption spectroscopy. It was found that the p-n junction p-NiO/n-TiO2 particles were trapped in the polyaniline molecular matrix and the polyaniline was deposited on the surface of the particles to form a kind of flower cluster morphologies. The electrochemical behavior of the polyaniline composites was investigated. The electrochemical reactivity of the polyaniline was influenced by the p-NiO/n-TiO2 particles due to the effect of electron-hole pairs in these p-n junction particles. The reversibility of redox process and current intensity of the polyaniline composites with the changing of potential scan rate were also discussed.     

Sisal fibers coated with conducting polyaniline: Property and structural studies

Sisal (Agave sisalana) fiber was extracted by manual process. These fibers were subjected to surface coating with conducting polyaniline, through in situ oxidative polymerization. The polyaniline modified sisal fibers were characterized by thermal, spectroscopic and microscopic techniques. It was shown that the fiber was coated with polyaniline through in situ oxidative polymerization and the latter had a smoothing effect on the surface as compared to uncoated sisal fiber. Besides, it was confirmed that polyaniline was deposited in conductive form of emeraldine salt. This in turn verified the introduction of active functionalities to the system, which is helpful to tune up surface chemistry of polyaniline for water treatment applications.     

聚苯胺/分级碳纳米管复合材料的制备与性能研究

在众多的导电高分子中，聚苯胺具有原料易得、合成简便、能进行快速与可逆的氧化还原反应、可储存高密度的电荷等优点，在能源、光电子器件、电容器、传感器、分子导线和分子器件，以及电磁屏蔽、金属防腐和隐身技术等领域有着诱人的应用前景．近年来，将导电聚苯胺用于超电容器，倍受人们的广泛关注．     

Spectral and thermal characterization of polyaniline–oxalic acid salt

Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc.     

聚苯胺膜电极在苯胺单体聚合反应中的电催化性能

自从第一个导电高聚物掺碘的聚乙炔问世以来［1］,人们又陆续开发研制了聚 苯胺(PAn)、聚吡咯和聚噻吩等导电高分子材料. 在众多的导电高分子材料中,聚苯胺以其原 料廉价易得,制备方法简便,导电性能优良,耐高温及抗氧化性能良好等优点而成为最具应用 前景的品种之一. 迄今为止,有关聚苯胺的链结构,掺杂反应,以及导电机理等基础理论方面 的研究已有大量的文献和综述报道［2～6］. 这些基础理论的研究为其应用研究奠定 了坚实的基础. 早在60年代,人们就发现,聚苯胺对氧化亚氮分解及丁二烯异构化反应具有独 特的催化作用;同时,聚苯胺具有超出几何表面的活性表面,故可对某些反应具有选择性的催 化作用. 因此,人们开始研究聚苯胺膜电极对某些电极反应的电催化性能［7～12］. 我国科学工作者在这一领域也做了许多有益的工作,如董绍俊等［13］研究了聚苯胺 膜修饰电极对抗坏血酸的电催化氧化,罗维忠等［14］研究了聚苯胺膜电极对Fe(Ⅱ) 和Sb(Ⅲ)的电催化作用. 本文主要讨论了扫描速度、苯胺单体浓度及温度对聚苯胺膜电极在 苯胺单体聚合过程中电催化性能的影响,为利用聚苯胺处理含苯胺废水提供了一定的理论依 据.     

Preparation of Nanosized Metallic Particles in Polyaniline

The preparation of nanosized gold and palladium particles in polyaniline has been carried out via the reduction of AuCl(3) or Pd(NO(3))(2) by polyaniline in either aqueous media or N-methylpyrrolidinone (NMP). When the reduction of AuCl(3) was carried out in NMP solutions of polyaniline, the Au particles were on the order of 20 nm. The reduction of AuCl(3) or Pd(NO(3))(2) by polyaniline in the powder form in aqueous media resulted in the accumulation of the elemental Au or Pd on the surface of the polyaniline particles. Subsequent dissolution of the polyaniline in NMP resulted in metal particles of about 50 to 200 nm being dispersed in the NMP solution of polyaniline. The rate of metal salt reduction and the size of the metal particles were found to be strongly dependent on the medium used, the initial ratio of metal ions to polyaniline, and the reaction time. The polyaniline-metal particle systems were characterized using X-ray photoelectron spectroscopy, UV-visible absorption spectroscopy, and FTIR spectroscopy. Scanning and transmission electron microscopy and laser light scattering were used to determine the size of the metal particles in polyaniline. Copyright 2001 Academic Press.     

载铂微粒的聚苯胺薄膜电极对甲醇的电催化氧化

用电化学方法制备的载有金属铂微粒的聚苯胺（ＰＡｎ）膜电极对甲醇在硫酸中的电化学氧化具有很高的催化活性。电极材料中的铂微粒是沿着聚苯胺的纤维分布的，而且主要沉积在ＰＡｎ膜的表面。     

阳离子表面活性剂作用下制备一维纳米结构聚苯胺

在十六烷基三甲基溴化铵(CTAB)存在下, 以盐酸为质子酸, 过硫酸铵为氧化剂, 制备了平均直径为115 nm、具有分叉结构的聚苯胺纳米纤维和平均直径为75 nm的卷曲聚苯胺纳米线, 两者的结构产率高达90%和100%, 电导率分别为1.6×10-2和9.3×10-2 S/cm. 研究发现, 聚苯胺的一维纳米结构受盐酸浓度和苯胺与CTAB摩尔比的协同影响. 用TEM, SEM和FTIR对产物的形貌和化学结构进行了表征. 利用pH监测反应并结合SEM结果研究了聚苯胺纳米线的形成过程, 结果表明, CTAB阳离子与过硫酸根形成的絮状物的诱导作用是聚苯胺纳米纤维和纳米线形成的关键因素.     

New polyaniline/chitosan composite systems: Synthesis,structure, and functional properties

Electroconductive and mechanically strength composite systems based on polyaniline and chitosan on the polyethylene porous substrate were obtained. A method to synthesize the conductive form of polyaniline in the solution of chitosan was developed. Molecular characteristics of chitosan in the solutions of acetic and hydrochloric acids and in their mixtures have been investigated. Optimal composition of solvent for the synthesis of polyaniline in a chitosan solution was determined. Electrical conductivity and mechanical characteristics of polyaniline/chitosan composite systems on porous polyethylene film were measured.     

Fabrication and characterization of core/shell structured TiO2/polyaniline nanocomposite

A novel core/shell structured TiO(2)/polyaniline nanocomposite was fabricated by grafting aniline on aminobenzoate monolayer that is chemically adsorbed on the TiO(2) nanocrystal surface. The formation and nanostructure of the nanocomposite were investigated by FT-IR and UV-Vis spectra, TEM, FE-SEM, and TG-DTA analysis. Adsorption of aminobenzoate on the TiO(2) surface is an effective method to obtain the uniform nanocomposite. The thickness of polyaniline layer coating on the TiO(2) nanocrystal surface can be controlled in a range of 2-5 nm by this method. A photoelectrochemical study was carried out on the TiO(2)/polyaniline nanocomposite, and found that polyaniline in the nanocomposite acted as a visible-light sensitizer in a photoelectrochemical reaction. The sensitization effect increased with increasing binding strength between polyaniline and TiO(2). A dye-sensitized solar cell with a short circuit current density of 0.19 mA/cm(2) and an open circuit voltage of 0.35 V was fabricated by using the TiO(2)/polyaniline nanocomposite film as a sensitized electrode.     

Synthesis and characterization of aluminum–polyaniline thin films and membranes

Polyaniline (PAni) films of different intrinsic oxidation states, including emeraldine salt, emeraldine base and leucoemeraldine base, were synthesized. Free‐standing membranes and thin film bilayers of aluminum–polyaniline were fabricated by magnetron sputter deposition of aluminum onto polyaniline films. Aluminum–polyaniline samples were analyzed by transmission electron microscopy (TEM) to investigate the microstructures of specimens, including cross‐sectional TEM micrographs of the metal‐polyaniline interfacial structure not previously reported in the literature. Auger electron spectroscopy (AES) and X‐ray photoelectron spectroscopy (XPS) were employed to study the chemical bonding and interaction between deposited aluminum and polyaniline at the interface. Results indicated that the intrinsic oxidation state of the polyaniline influenced the chemistry of the aluminum–polyaniline interface. Distinct interaction between aluminum and polyaniline in the emeraldine salt‐form was observed. However, there was no evidence of direct interactions of the aluminum with emeraldine base and leucoemeraldine base polyaniline. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and electrochemical performance of sandwich-like polyaniline/graphene composite nanosheets

Sandwich-like polyaniline/graphene composite nanosheets have been synthesized by chemical oxidation polymerization of aniline monomer on the surfaces of reduced graphene oxide nanosheets in the absence of any surfactants. The influences of the mass ratios of aniline and reduced graphene oxide on the sizes and morphologies of polyaniline/graphene nanocomposites have been investigated. As the mass ratio of aniline and reduced graphene oxide is smaller than 12:1, polymerization reaction of aniline occurs on the surfaces of reduced graphene oxide by heterogeneous nucleation to form sandwich-like polyaniline/graphene composite nanosheets. However, besides sandwich-like polyaniline/graphene composite nanosheets, polyaniline nanofibers are formed by homogeneous nucleation. In comparison with reduced graphene oxide and polyaniline nanofibers, the obtained sandwich-like polyaniline/graphene composite nanosheets exhibit good electrochemical performances due to the synergistic effect between graphene and polyaniline.     

电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

Polyaniline-coated silica gel

Silica gel microspheres 7 and 15 μm in diameter were coated with an overlayer of polyaniline camphorsulfonate or hydrochloride during the oxidative polymerization of aniline. Coated silica gel and polyaniline precipitate were separated using a difference in sedimentation rate. In an alternative approach, the microspheres were modified with polyaniline in the presence of 35 nm colloidal silica. This technique prevented the macroscopic precipitation of polyaniline. Coatings of neat, 3-aminopropyl- and octadecyl-modified silica gel with polyaniline hydrochloride were compared. The surface composition of coated microspheres was characterized by X-ray photoelectron spectroscopy. Potential applications of particles in electrorheology, organic catalysis, and in modeling of conductivity behavior in composites are demonstrated.     

掺杂聚苯胺能带结构和导电机理的研究

用EHMO-CO方法对质子掺杂聚苯胺进行了模型化理论计算,得到与吸收光谱实验数据一致的能带结构,研究表明,掺杂苯胺中的载流子是极化子,能满意地解释掺杂聚苯胺的导电机制。     

零流电位法考察聚苯胺膜的pH响应性质

将经电化学聚合的聚苯胺膜修饰的铅笔芯电极连接于一种新型电化学检测系统中,采用零流电位法考察了聚苯胺膜的pH响应性质。结果表明:试验制得的聚苯胺膜主要以中间氧化态形态存在,在B-R缓冲溶液中pH可控的质子化和去质子化形态转换,导致零流电位E_(ZCP)-pH曲线呈现两段相交的线性关系,其pH范围分别为pH 1.81～5.43及pH 5.43～9.91,两直线的交叉点在pH 5.43处,由此求得中间氧化态的pK_a值为5.43。     

Electrorheological behavior of suspensions of a substituted polyaniline with long alkyl pendants

The electrorheological (ER) properties of poly(2-dodecyloxyaniline) (PDOA) suspensions in silicone oil were investigated. The ER behavior of such suspensions of polyaniline particles depends on the type of stabilizer and doping or dedoping level. Here we report on the ER behavior of particles of a substituted polyaniline with long alkyl pendants. Rheological measurements were carried out using a rotational rheometer with high-voltage generator in both constant shear stress and rate modes. Suspensions of the as-synthesized polyaniline particles in silicone oil showed a substantial ER response.     

循环伏安法的电扫描方式对苯胺聚合产物形貌影响的观察

在含有0.2 mol.L-1苯胺的0.5 mol.L-1H2SO4溶液中,以扫描速度50 mV.s-1,扫描电位为-0.1~0.9 V,采用循环伏安法(CV),在金属Ti基体上,通过控制扫描方式分别得到了颗粒状、纤维状及管-片状的苯胺聚合产物,分析了形成不同形貌聚苯胺的原因,并通过扫描电子显微镜(SEM)、循环伏安法和电化学阻抗谱(EIS)对不同形貌聚苯胺的结构和性能进行了表征.结果表明,不同形貌聚苯胺的形成是由于聚苯胺的成核及生长模式不同,而无论何种形貌的聚苯胺膜都具有很大的比表面积和良好的导电性能,其中,管-片状聚苯胺的膜层阻抗最小,导电性能最好.