表面增强拉曼光谱研究以4,4'-联吡啶为标记分子的免疫检测

通过表面增强拉曼光谱(SERS)研究了标记分子4,4'-联吡啶在金溶胶上的吸附行为, 并将其与山羊抗小鼠IgG结合, 获得SERS标记免疫金溶胶. 在固相基底上组装抗体, 两者组装得到固相抗体-抗原-标记抗体“三明治”结构. 在单组分和双组分体系中借助抗体上标记金纳米粒子所带的SERS信号达到免疫检测的目的.     

表面增强拉曼光谱研究以4,4''''-联吡啶为标记分子的免疫检测

通过表面增强拉曼光谱(SERS)研究了标记分子4,4'-联吡啶在金溶胶上的吸附行为,并将其与山羊抗小鼠IgG结合,获得SERS标记免疫金溶胶.在固相基底上组装抗体,两者组装得到固相抗体-抗原-标记抗体“三明治”结构.在单组分和双组分体系中借助抗体上标记金纳米粒子所带的SERS信号达到免疫检测的目的.     

标记免疫双组分的SERS检测研究

以金膜为免疫检测的基底, 采用自组装技术(Self-assembled monolayer, SAM)将ω-巯基十六酸(16-MHA)修饰于金膜后与抗体结合成固相抗体, 在此基础上组装“固相抗体-待测抗原-标记免疫金溶胶”三明治复合体系. 采用不同标记分子苯硫酚(Thiophenol)和4,4'-联吡啶(4,4'-Bipyridine)分别标记不同的免疫金溶胶, 利用表面增强拉曼光谱(SERS)谱峰较窄且具有较强的分辨率及高灵敏度的特点, 通过对两种标记分子特征谱峰的判断识别所加入的两种抗原. 通过选择合适的标记分子和一定尺度的免疫溶胶, 标记免疫SERS检测的检测限可达到飞克级(1—100 fg/mL).     

表面增强拉曼光谱应用于标记免疫多组分检测

作为一种新型的免疫检测方法, 表面增强拉曼光谱(SERS)技术被应用于标记免疫多组分检测. 以多种不同的标记分子(苯硫酚, 联吡啶类分子, 氰基吡啶类分子)分别标记多种不同免疫金溶胶, 通过抗体抗原之间所具有的特异吸附性, 进一步组装“固相抗体-待测抗原-标记免疫金溶胶”多组分三明治复合体系. 利用表面增强拉曼光谱谱峰较窄, 具有较强的分辨率及高灵敏度的特点, 对多种标记分子特征谱峰进行分析判断, 从而识别所加入的多种抗原, 实现SERS标记免疫多组分同时检测的目的, 并对其中氰基吡啶类分子的吸附进行了探讨.     

SERS标记的金纳米棒探针用于免疫检测

报道了基于金纳米棒表面增强拉曼散射(SERS)的免疫检测. 将拉曼活性分子对巯基苯甲酸吸附于金纳米棒表面, 制备出SERS标记的金纳米棒探针. 该探针和蛋白抗体结合形成SERS标记抗体. 通过SERS标记抗体、待测抗原和俘获抗体(固体基底上修饰的抗体, 即俘获抗体)之间的免疫应答反应, 将金纳米棒探针组装到固体基底上, 形成SERS标记抗体-抗原-俘获抗体 “三明治”夹心复合体. 待测抗原浓度越大, 固体基底上俘获的金纳米棒探针的数目越多, 从而可通过SERS信号的强弱来检测待测抗原的浓度. 由于金纳米棒的表面等离子体共振(SPR)峰位置可以在较宽的范围内调控, 可通过激发光和SPR的耦合来提高SERS信号, 从而提高免疫检测的灵敏度. 单组分抗原可检出的浓度范围高于1×10－8 mg/mL.     

基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

组蛋白乙酰化的耦合增强拉曼散射生物传感方法

提出了一种组蛋白乙酰化修饰检测的耦合增强拉曼散射生物传感新方法. 该方法以金纳米粒子为表面增强拉曼散射(SERS)基底, 表面修饰乙酰化组蛋白H3多肽为识别探针, 对甲氧基苯硫酚(4-MTP)为拉曼标记物, 制备了组蛋白乙酰化修饰检测的SERS纳米探针. 通过紫外可见吸收光谱与动态光散射分析, 证实了组蛋白乙酰化抗体可介导SERS纳米粒子发生可控组装与聚集, 使SERS纳米探针间发生局域电场共振耦合, 产生显著增强的SERS信号. 基于此, 通过待测抗原与SERS纳米探针对抗体的竞争性相互作用, 我们设计了组蛋白乙酰化修饰检测的竞争免疫SERS生物传感方法. 该法操作简便、快速、重现性好, 且裸眼即能进行可视化鉴定. 通过设计不同染料标记的SERS纳米探针, 该法有望实现多种组蛋白修饰的复合检测.     

铬酸根离子的SERS检测及磁分离研究

介绍了一种基于表面增强拉曼光谱技术(SERS)的简单快速检测低浓度铬酸根离子的方法. 通过介质中水与铬酸根离子以及修饰在金基底和金纳米粒子表面的羧酸根形成氢键而构建“巯基苯甲酸-金基底/铬酸根-水/巯基苯甲酸-金纳米粒子”三明治结构. 通过检测标记分子的SERS信号判断溶液中是否存在铬酸根离子. 研究表明标记分子的SERS强度与铬酸根离子的浓度有关, 随浓度增加SERS强度呈非线性增强, 在10^－9 mol/L出现转折点. 利用以上三明治结构, 通过引入功能化的Fe₂O₃@Au核壳磁性纳米粒子, 利用外加磁场可富集分离溶液中的铬酸根离子, 经SERS 检测表明10^－5 mol/L的铬酸根离子磁分离后其浓度降低了约4～6个数量级.     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.     

金纳米簇信号放大的电化学免疫传感器

通过抗原抗体的特异性识别作用以及金纳米簇(AuNCs)探针和金标银染的双重信号放大作用,构建了一种新的电化学免疫传感器,对人的免疫球蛋白(IgG)进行了检测。受贻贝分泌的黏附蛋白启示,首先将聚多巴胺薄膜修饰在铟锡氧化物电极(ITO)上,并对一抗抗体进行固定,通过观察电化学阻抗的变化来监控免疫传感器的构建过程。将待检测的IgG抗原组装在该电极上并与AuNCs标记的二抗反应,最后经银染反应,用溶出伏安法对IgG的含量进行定量检测,其灵敏度达到0.5 ng/L。该方法可应用于实际血清样品中IgG含量的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.