立体选择性烯烃复分解反应的研究及应用

烯烃复分解反应是基于钌卡宾催化的形成碳碳双键的重要反应之一,近年来关于立体选择性烯烃复分解反应的研究越来越多.综述了近年来基于钌催化的立体选择性烯烃复分解反应,包括金属钌催化剂的种类、演化、立体选择性研究进展及其在不对称合成中的应用.重点介绍了近十年来钌催化烯烃复分解反应类型及其在不对称合成中的应用研究进展,并对今后的发展做出展望.     

锇催化烯烃双羟基化的反应原理与立体选择性

介绍了四氧化锇催化不对称烯烃双羟基化的反应原理和以N-甲基吗啉-N-氧化物（N-methylmorpholine-N-oxide,NMO）、铁氰化钾K3[Fe（CN）6] 为氧化剂时烯烃双羟基化反应的催化循环;此外,还介绍了该催化反应立体选择性的机理和一些研究进展以及催化体系中手性配体的选择。     

钯催化的烯烃异构化反应

烯烃异构反应可以从简单烯烃出发,通过对碳碳双键立体选择性或者位置选择性调控,实现内烯烃化合物尤其其他方法难以构建的多取代烯烃的高效合成,原子经济性高.详细介绍了钯催化烯烃异构化反应的反应机制,系统总结了钯催化的烯烃顺反异构和位置选择性异构反应,以及其在药物分子和天然产物合成中的应用.     

系统论述烯烃亲电加成反应的立体选择性

亲电加成是烯烃最具代表性的典型反应,在本科的教学中,要求学生熟练掌握和应用。烯烃的亲电加成反应不仅涉及到反应的活性、区域选择性问题,还涉及到反应的立体选择性问题。但对于立体选择性的阐述,很多教科书并不全面,甚至不够严谨,因而在教学过程中发现学生在理解这部分内容时存在一定的误解。针对这一问题进行了系统的论述,以帮助学生更好更正确地理解和掌握烯烃的亲电加成反应的立体选择性。     

烯烃亲电加成反应的教学研究

烯烃的典型反应是亲电加成反应.大学有机化学教学目标要求学生掌握并能熟练应用烯烃亲电加成反应的区域选择性、立体选择性以及烯烃的反应活性解决实际问题.具体包括:(1)使用区域选择性预测加成主副产物;(2)使用立体选择性判断加成产物立体结构;(3)综合考虑电子效应,熟练比较各种烯烃的反应活性.由于烯烃亲电加成反应底物多、影响...     

过渡金属催化下的烯烃硼氢化反应

本文综述了在过渡金属尤其是铑络合物催化下烯烃与CB的硼氢化反应在化学、位置和立体选择性的进展,对它们的机理也进行了讨论。     

α-氰醇立体选择性合成新进展

总结了近十年来立体选择性合成α-氰醇的最新进展, 包括金属配合物催化的醛、酮类底物的立体选择性氢氰化和硅氰化反应, 不含金属的有机小分子催化剂催化的醛、酮类底物的立体选择性硅氰化反应以及生物催化的立体选择性氢氰化反应. 另外对部分反应中涉及的机理也作了介绍.     

过渡金属催化下的烯烃硼氢化反应

本文综述了在过渡金属尤其是铑络合物催化下烯烃与CB ( 邻苯二酚硼烷 ) 的硼氢化反应在化学、位置和立体选择性的进展, 对它们的机理也进行了讨论。     

溴与不同取代C=C双键反应的机理和立体选择性

溴与C=C双键的反应是有机化学中一类常见的基元反应。溴与烯烃的C=C双键发生亲电加成反应,脂肪烯烃经过三元环正离子中间体再亲核开环机理,形成立体专一的反式加成产物;而芳基烯烃形成的三元环中间体,由于芳基对碳正离子的稳定作用,其苯甲位C―Br键容易断裂,会得到顺式和反式加成产物的混合物。溴与酮和酰氯形成的烯醇或烯醇负离子发生亲电取代,反应中溴不会与其C=C双键形成三元环正离子中间体。类似地,溴与烯醇醚和烯胺的反应也不经过三元环正离子中间体,分别生成非立体专一的加成和取代产物。本文通过参与该步基元反应的分子轨道合理地解释了溴与这两类底物反应的机理和立体选择性的区别,并总结了溴与不同C=C双键反应机理的判断方法,便于教师讲授和学生理解。     

过渡金属催化的烯烃羰基化反应现状与进展

阐述了烯烃羰基化反应在区域选择性和立体选择性方面的现状与最新进展,同时对羰基化反应新进展－超临界二氧化碳流体作为反应介质也作了综述。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.