首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 832 毫秒
1.
将在线富集技术同二维(2D)毛细管电泳(CE)分离相结合同时提高复杂样品中痕量组分的分离度和检测灵敏度.毛细管区带电泳(CZE)作为第一维,分析物根据淌度不同进行分离,第一维流出组分进入第二维毛细管,根据分配系数不同进行胶束电动毛细管色谱(MEKC)分离.采用阳离子选择性耗尽进样(CSEI)在柱预富集,延长进样时间,增大进样量;同时在二维毛细管接口处采用动态pH联接/胶束扫集在线富集技术不仅避免第一维分离组分在接口处扩散,还可进一步压缩样品区带.同常规电动进样CE分离相比,该在线富集二维分离技术的分离能力远远高于一维CZE或MEKC分离,富集倍数达到(0.5~1.2)×104.该法成功应用于人体尿样中四种药物及对映体的分析测定,浓度检出限为0.1~0.3μg/L.进一步研究了人体尿样中四种药物24h内的药代动力学规律.  相似文献   

2.
胶束电动色谱分离5种二氢吡啶类钙拮抗剂   总被引:3,自引:0,他引:3  
应用胶束电动毛细管色谱,以40mmol/L硼砂-40mmol/L十二烷基硫酸钠(SDS)为运行缓冲溶液,柱温60℃,在13min内分离了5种二氢吡啶类钙拮抗剂药物。讨论了它SDS浓度、硼砂浓度、缓冲溶液PH、柱温对迁移时间和分离的影响。  相似文献   

3.
张效伟  张召香 《色谱》2010,28(4):397-401
建立了毛细管区带电泳(CZE)/胶束电动毛细管色谱(MEKC)二维毛细管电泳分离平台,CZE毛细管和MEKC毛细管通过一段带微孔的聚四氟乙烯(polytetrafluoroethylene, PTFE)套管固定。样品在CZE毛细管中分离后进入MEKC毛细管进一步分离,在二维转换过程中采用动态pH连接-胶束扫集法避免第一维分离区带在接口处扩散。将该方法成功用于鼠尿样品中4种药物及其对映体的分离,各组分的理论塔板数为(2.8~4.3)×104/m,检出限为0.015~0.052 mg/L,实际样品中峰面积和迁移时间的相对标准偏差(n=7)分别为1.7%~3.8%和1.3%~4.6%。方法重现性好、灵敏度和分离度高、峰容量大,适用于尿样中多种药物组分及其对映体的同时分离检测。  相似文献   

4.
高效毛细管电泳的电导检测和紫外光度检测研究   总被引:3,自引:1,他引:3  
吴家泉  夏令伟 《分析化学》1993,21(6):727-731
本文自制商效毛细管电泳装置.研究了毛细管区带电泳电导检测和毛细管胶束电动色谱紫外光度检测。在电导检测中,制作铂丝微电导池,并由用电池隔膜制作的导电接口连接电泳毛细管和电导池,高压被有效隔离,实现柱后电导检测,用内径200μm、长70cm(到接口)石英毛细管在10kV电压下分离检测Li~-、Na~-、K~-。在电动色谱中将高效液相色谱仪与高压电源组成电泳装置,用内径100μm,长50cm(到检测器)石英毛细管和SDS胶束溶液在14kV电压下分离检测电中性化合物。  相似文献   

5.
毛细管胶束电动色谱测定解热镇痛药成份   总被引:1,自引:1,他引:1  
吕建德  傅小芸 《分析化学》1992,20(3):251-254
用毛细管胶束电动色谱对解热镇痛药的有效成份进行了分离和定量研究,实验在自装的毛细管电泳装置上进行。考察了电压及胶束溶液浓度对分离的影响,峰面积定量的重现性及线性。用二点内标法分析去痛片中的咖啡因、苯巴比妥、氨基比林、非那西汀。测定结果与HPLC结果一致。  相似文献   

6.
苯胺及其衍生物的毛细管电泳行为研究   总被引:3,自引:1,他引:3  
采用紫外吸收检测,毛细管电泳分离,研究了九种苯胺及其衍生物在毛细管区带电泳(CZE)体系和胶束电动毛细管色谱(MECC)体系中的行为特征。讨论了缓冲溶液的浓度与pH、胶束浓度及混合胶束等在不同体系中对分离组分的影响,发现在CZE体系中,控制分离的主要因素是pKb值;在MECC体系中,控制分离的主要因素是溶质分子中碳原子数。建立了一种分离测定九种苯胺及其衍生物的高效毛细管电泳方法。  相似文献   

7.
《化学分析计量》2003,12(1):10-10
南京师范大学化学与环境科学学院王东新等人采用溶胶-凝胶法制备用于分离极性有机化合物的毛细管气相色谱柱,其制备工艺简单,制柱时间较传统工艺大为缩短。该柱涂层与毛细管内壁间形成的化学键使毛细管柱具有很好  相似文献   

8.
溶胶-凝胶法制备用于分离极性有机化合物的毛细管气相柱   总被引:20,自引:1,他引:20  
王东新  MALIK Abdul 《色谱》2002,20(3):279-282
 采用溶胶 凝胶法制备了用于分离有机极性化合物的毛细管气相柱 ,其制备工艺简单 ,制柱时间较传统工艺大为缩短。该柱涂层与毛细管内壁间形成的化学键使得其热稳定性好。游离的脂肪酸、有机碱可直接在该柱上得到很好的分离 ,其他极性化合物也在该柱上得到极好的分离。该类柱不仅在同一柱上显示了良好的分离重复性 ,而且不同柱间在容量因子、柱效、对称性及姆氏常数上也显示了良好的重复性。  相似文献   

9.
有机-无机杂化硅胶基质整体柱的制备及其电色谱性能   总被引:1,自引:1,他引:0  
采用溶胶-凝胶法,以四乙氧基硅烷和苯基三乙氧基硅烷作为反应单体,通过酸碱两步催化在毛细管中进行原位缩聚反应,制备了新型有机-无机杂化硅胶基质毛细管整体柱,制备过程简单。整体柱基质中均匀分布的苯基基团可直接用于反相毛细管电色谱的分离,因而不需要对基质再进行衍生化。优化了整体柱的制备条件,采用扫描电镜和压汞法对整体柱的微观结构和孔径分布进行了表征。分别考察了溶胶-凝胶初始反应液中水的用量对柱床结构的影响和两种单体的配比对材料孔径分布的影响。研究了稠环芳烃类化合物在整体柱上的保留行为,用所制备的整体柱分离了7种苯酚类化合物,平均柱效达100000塔板/m。  相似文献   

10.
采用阳离子型离子液体表面活性剂1-十四烷基-3-甲基咪唑溴盐为毛细管胶束电动色谱(MEKC)的假固定相,引入了场放大进样-扫集在线双富集技术,建立了三种头孢菌素类抗生素(头孢他啶、头孢噻肟钠和头孢曲松钠)分离检测的方法。详细考察了影响在线富集、分离和检测的因素,在优化的条件下,三种药物可在10 min内得到分离。同常规的扫集-MEKC法相比,采用这种在线双富集技术对头孢他啶、头孢噻肟钠和头孢曲松钠的富集倍数分别达到113、97和100。该方法简便、快速、灵敏、重现性好,并且成功用于尿样中三种药物的分离测定,结果令人满意。  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

14.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

15.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

16.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

17.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

18.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

19.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

20.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号