Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.     

Isolated Tin(IV) Active Sites for Highly Efficient Electroreduction of CO2 to CH4 in Neutral Aqueous Solution

The development of efficient electrocatalysts with non-copper metal sites for electrochemical CO₂ reduction reactions (eCO₂RR) to hydrocarbons and oxygenates is highly desirable, but still a great challenge. Herein, a stable metal–organic framework (DMA)₄[Sn₂(THO)₂] (Sn-THO, THO⁶⁻ = triphenylene-2,3,6,7,10,11-hexakis(olate), DMA = dimethylammonium) with isolated and distorted octahedral SnO₆²⁻ active sites is reported as an electrocatalyst for eCO₂RR, showing an exceptional performance for eCO₂RR to the CH₄ product rather than the common products formate and CO for reported Sn-based catalysts. The partial current density of CH₄ reaches a high value of 34.5 mA cm⁻², surpassing most reported copper-based and all non-Cu metal-based catalysts. Our experimental and theoretical results revealed that the isolated SnO₆²⁻ active site favors the formation of key *OCOH species to produce CH₄ and can greatly inhibit the formation of *OCHO and *COOH species to produce *HCOOH and *CO, respectively.     

Facile Synthesis of Sub-Nanometric Copper Clusters by Double Confinement Enables Selective Reduction of Carbon Dioxide to Methane

Previous density-functional theory (DFT) calculations show that sub-nanometric Cu clusters (i.e., 13 atoms) favorably generate CH₄ from the CO₂ reduction reaction (CO₂RR), but experimental evidence is lacking. Herein, a facile impregnation-calcination route towards Cu clusters, having a diameter of about 1.0 nm with about 10 atoms, was developed by double confinement of carbon defects and micropores. These Cu clusters enable high selectivity for the CO₂RR with a maximum Faraday efficiency of 81.7 % for CH₄. Calculations and experimental results show that the Cu clusters enhance the adsorption of *H and *CO intermediates, thus promoting generation of CH₄ rather than H₂ and CO. The strong interactions between the Cu clusters and defective carbon optimize the electronic structure of the Cu clusters for selectivity and stability towards generation of CH₄. Provided here is the first experimental evidence that sub-nanometric Cu clusters facilitate the production of CH₄ from the CO₂RR.     

Nitrogen‐Doped Carbon Nanotube Arrays for High‐Efficiency Electrochemical Reduction of CO2: On the Understanding of Defects,Defect Density,and Selectivity

Nitrogen‐doped carbon nanotubes (NCNTs) have been considered as a promising electrocatalyst for carbon‐dioxide‐reduction reactions, but two fundamental chemistry questions remain obscure: 1) What are the active centers with respect to various defect species and 2) what is the role of defect density on the selectivity of NCNTs? The aim of this work is to address these questions. The catalytic activity of NCNTs depends on the structural nature of nitrogen in CNTs and defect density. Comparing with pristine CNTs, the presence of graphitic and pyridinic nitrogen significantly decreases the overpotential (ca. ?0.18 V) and increases the selectivity (ca. 80 %) towards the formation of CO. The experimental results are in congruent with DFT calculations, which show that pyridinic defects retain a lone pair of electrons that are capable of binding CO₂. However, for graphitic‐like nitrogen, electrons are located in the π* antibonding orbital, making them less accessible for CO₂ binding.     

Increasing the CO2/N2 Selectivity with a Higher Surface Density of Pyridinic Lewis Basic Sites in Porous Carbon Derived from a Pyridyl‐Ligand‐Based Metal–Organic Framework

The development of functional porous carbon with high CO₂/N₂ selectivity is of great importance for CO₂ capture. In this paper, a type of porous carbon with doped pyridinic sites (termed MOFC) was prepared from the carbonization of a pyridyl‐ligand based MOF. Four MOFCs derived from different carbonizing temperatures were prepared. Structural studies revealed high contents of pyridinic‐N groups and nearly the same pore‐size distributions for these MOFCs. Gas‐sorption studies revealed outstanding CO₂ uptake at low pressures and room temperature. Owing to the high content of pyridinic‐N groups, the CO₂/N₂ selectivity on these MOFCs exhibits values of about 40–50, which are among the top values in carbon materials. Further correlation studies demonstrated that the CO₂/N₂ selectivities show a positive linear relationship with the surface density of pyridinic‐N groups, thus validating the synergistic effect of the doped pyridinic‐N groups on CO₂ adsorption selectivity.     

Nitrogen‐Doped Carbon Nanotube Arrays for High‐Efficiency Electrochemical Reduction of CO2: On the Understanding of Defects,Defect Density,and Selectivity

Nitrogen‐doped carbon nanotubes (NCNTs) have been considered as a promising electrocatalyst for carbon‐dioxide‐reduction reactions, but two fundamental chemistry questions remain obscure: 1) What are the active centers with respect to various defect species and 2) what is the role of defect density on the selectivity of NCNTs? The aim of this work is to address these questions. The catalytic activity of NCNTs depends on the structural nature of nitrogen in CNTs and defect density. Comparing with pristine CNTs, the presence of graphitic and pyridinic nitrogen significantly decreases the overpotential (ca. −0.18 V) and increases the selectivity (ca. 80 %) towards the formation of CO. The experimental results are in congruent with DFT calculations, which show that pyridinic defects retain a lone pair of electrons that are capable of binding CO₂. However, for graphitic‐like nitrogen, electrons are located in the π* antibonding orbital, making them less accessible for CO₂ binding.     

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO₂ER) to produce multicarbon (C₂₊) feedstocks (e.g., C₂H₄). However, the high energy barriers for CO₂ activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C₂H₄ selectivity of 62.5 % and an industrial-level current density of 160 mA cm⁻² at a low potential of −0.72 V were achieved. Our studies revealed that the isolated NiN₃ active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO₂ER to C₂H₄.     

Cu cluster embedded porous nanofibers for high-performance CO2 electroreduction

Metal-doped carbon materials, as one of the most important electrocatalytic catalysts for CO₂ reduction reaction (CO₂RR), have attracted increasing attention. Herein, a series of Cu cluster embedded highly porous nanofibers have been prepared through the carbonization of electro-spun MOF/PAN nanofibers. The obtained Cu cluster doped porous nanofibers possessed fibrous morphology, high porosity, conductivity, and uniformly dispersed Cu clusters, which could be applied as promising CO₂RR catalysts. Specifically, best of them, MCP-500 exhibited high catalytic performance for CO₂RR, in which the Faradaic efficiency of CO (FE_CO) was as high as 98% at ?0.8 V and maintained above 95% after 10 h continuous electrocatalysis. The high performance might be attributed to the synergistic effect of tremendously layered graphene skeleton and uniformly dispersed Cu clusters that could largely promote the electron conductivity, mass transfer and catalytic activity during the electrocatalytic CO₂RR process. This attempt will provide a new idea to design highly active CO₂RR electrocatalyst.     

Enhancing CO2 Electroreduction to Methane with a Cobalt Phthalocyanine and Zinc–Nitrogen–Carbon Tandem Catalyst

Developing copper-free catalysts for CO₂ conversion into hydrocarbons and oxygenates is highly desirable for electrochemical CO₂ reduction reaction (CO₂RR). Herein, we report a cobalt phthalocyanine (CoPc) and zinc–nitrogen–carbon (Zn-N-C) tandem catalyst for CO₂RR to CH₄. This tandem catalyst shows a more than 100 times enhancement of the CH₄/CO production rate ratio compared with CoPc or Zn-N-C alone. Density functional theory (DFT) calculations and electrochemical CO reduction reaction results suggest that CO₂ is first reduced into CO over CoPc and then CO diffuses onto Zn-N-C for further conversion into CH₄ over Zn-N₄ site, decoupling complicated CO₂RR pathway on single active site into a two-step tandem reaction. Moreover, mechanistic analysis indicates that CoPc not only generates CO but also enhances the availability of *H over adjacent N sites in Zn-N₄, which is the key to achieve the high CH₄ production rate and understand the intriguing electrocatalytic behavior which is distinctive to copper-based tandem catalysts.     

Cu Atomic Chain Supported on Graphene Nanoribbon for Effective Conversion of CO2 to Ethanol

Cu catalysts are well-known for their good performance in CO₂ conversion. Compared to CO and CH₄ production, C₂ products have higher volumetric energy densities and are more valuable in industrial applications. In this work, we screened the catalytic ability of C₂ production on several 1D Cu atomic chain structures and find that Cu edge-decorated zigzag graphene nanoribbons (Cu−ZGNR) are capable of catalyzing CO₂ conversion to ethanol, and CH₃CH₂OH is the main C₂ product with a maximum free energy change of 0.60 eV. The planar tetracoordinate carbon structures in Cu-ZGNR provide unique chemical bonding features for catalytic reaction on the Cu atoms. Detailed mechanism analyses with transition states search show that CO* dimerization is favored against CHO* formation in the reaction. By adjusting the CO* coverage, the selectivity of the C₂ product can be enhanced owing to less pronounced steric effects for COCHO*, which is feasible under experimental conditions. This study expands the catalyst family for C₂ products from CO₂ based on nano carbon structures with new features.     

Recent advances in carbon-based materials for electrochemical CO2 reduction reaction

The increase of atmospheric CO₂ concentration has caused many environmental issues. Electrochemical CO₂ reduction reaction（CO₂RR） has been considered as a promising strategy to mitigate these challenges. The electrocatalysts with a low overpotential, high Faradaic efficiency, and excellent selectivity are of great significance for the CO₂RR. Carbon-based materials including metal-free carbon catalysts and metal-based carbon catalysts have shown great p...     

Construction of Low-Coordination Cu−C2 Single-Atoms Electrocatalyst Facilitating the Efficient Electrochemical CO2 Reduction to Methane

Constructing Cu single-atoms (SAs) catalysts is considered as one of the most effective strategies to enhance the performance of electrochemical reduction of CO₂ (e-CO₂RR) towards CH₄, however there are challenges with activity, selectivity, and a cumbersome fabrication process. Herein, by virtue of the meta-position structure of alkynyl in 1,3,5-triethynylbenzene and the interaction between Cu and −C≡C−, a Cu SAs electrocatalyst (Cu−SAs/HGDY), containing low-coordination Cu−C₂ active sites, was synthesized through a simple and efficient one-step method. Notably, this represents the first achievement of preparing Cu SAs catalysts with Cu−C₂ coordination structure, which exhibited high CO₂-to-CH₄ selectivity (72.1 %) with a high CH₄ partial current density of 230.7 mA cm⁻², and a turnover frequency as high as 2756 h⁻¹, dramatically outperforming currently reported catalysts. Comprehensive experiments and calculations verified the low-coordination Cu−C₂ structure not only endowed the Cu SAs center more positive electricity but also promoted the formation of H•, which contributed to the outstanding e-CO₂RR to CH₄ electrocatalytic performance of Cu−SAs/HGDY. Our work provides a novel H⋅-transferring mechanism for e-CO₂RR to CH₄ and offers a protocol for the preparation of two-coordinated Cu SAs catalysts.     

Enhanced Electroreduction of Carbon Dioxide to Methanol Using Zinc Dendrites Pulse‐Deposited on Silver Foam

The electrocatalytic CO₂ reduction reaction (CO₂RR) can dynamise the carbon cycle by lowering anthropogenic CO₂ emissions and sustainably producing valuable fuels and chemical feedstocks. Methanol is arguably the most desirable C₁ product of CO₂RR, although it typically forms in negligible amounts. In our search for efficient methanol‐producing CO₂RR catalysts, we have engineered Ag‐Zn catalysts by pulse‐depositing Zn dendrites onto Ag foams (PD‐Zn/Ag foam). By themselves, Zn and Ag cannot effectively reduce CO₂ to CH₃OH, while their alloys produce CH₃OH with Faradaic efficiencies of approximately 1 %. Interestingly, with nanostructuring PD‐Zn/Ag foam reduces CO₂ to CH₃OH with Faradaic efficiency and current density values reaching as high as 10.5 % and ?2.7 mA cm^?2, respectively. Control experiments and DFT calculations pinpoint strained undercoordinated Zn atoms as the active sites for CO₂RR to CH₃OH in a reaction pathway mediated by adsorbed CO and formaldehyde. Surprisingly, the stability of the *CHO intermediate does not influence the activity.     

Elucidating the Electrocatalytic CO2 Reduction Reaction over a Model Single-Atom Nickel Catalyst

Designing effective electrocatalysts for the carbon dioxide reduction reaction (CO₂RR) is an appealing approach to tackling the challenges posed by rising CO₂ levels and realizing a closed carbon cycle. However, fundamental understanding of the complicated CO₂RR mechanism in CO₂ electrocatalysis is still lacking because model systems are limited. We have designed a model nickel single-atom catalyst (Ni SAC) with a uniform structure and well-defined Ni-N₄ moiety on a conductive carbon support with which to explore the electrochemical CO₂RR. Operando X-ray absorption near-edge structure spectroscopy, Raman spectroscopy, and near-ambient X-ray photoelectron spectroscopy, revealed that Ni⁺ in the Ni SAC was highly active for CO₂ activation, and functioned as an authentic catalytically active site for the CO₂RR. Furthermore, through combination with a kinetics study, the rate-determining step of the CO₂RR was determined to be *CO₂⁻+H⁺→*COOH. This study tackles the four challenges faced by the CO₂RR; namely, activity, selectivity, stability, and dynamics.     

Elucidating the Electrocatalytic CO2 Reduction Reaction over a Model Single‐Atom Nickel Catalyst

Designing effective electrocatalysts for the carbon dioxide reduction reaction (CO₂RR) is an appealing approach to tackling the challenges posed by rising CO₂ levels and realizing a closed carbon cycle. However, fundamental understanding of the complicated CO₂RR mechanism in CO₂ electrocatalysis is still lacking because model systems are limited. We have designed a model nickel single‐atom catalyst (Ni SAC) with a uniform structure and well‐defined Ni‐N₄ moiety on a conductive carbon support with which to explore the electrochemical CO₂RR. Operando X‐ray absorption near‐edge structure spectroscopy, Raman spectroscopy, and near‐ambient X‐ray photoelectron spectroscopy, revealed that Ni⁺ in the Ni SAC was highly active for CO₂ activation, and functioned as an authentic catalytically active site for the CO₂RR. Furthermore, through combination with a kinetics study, the rate‐determining step of the CO₂RR was determined to be *CO₂^?+H⁺→*COOH. This study tackles the four challenges faced by the CO₂RR; namely, activity, selectivity, stability, and dynamics.     

Highly Efficient Electroreduction of CO2 to C2+ Alcohols on Heterogeneous Dual Active Sites

Electroreduction of CO₂ to liquid fuels such as ethanol and n‐propanol, powered by renewable electricity, offers a promising strategy for controlling the global carbon balance and addressing the need for the storage of intermittent renewable energy. In this work, we discovered that the composite composed of nitrogen‐doped graphene quantum dots (NGQ) on CuO‐derived Cu nanorods (NGQ/Cu‐nr) was an outstanding electrocatalyst for the reduction of CO₂ to ethanol and n‐propanol. The Faradaic efficiency (FE) of C2+ alcohols could reach 52.4 % with a total current density of 282.1 mA cm^?2. This is the highest FE for C2+ alcohols with a commercial current density to date. Control experiments and DFT studies show that the NGQ/Cu‐nr could provide dual catalytic active sites and could stabilize the CH₂CHO intermediate to enhance the FE of alcohols significantly through further carbon protonation. The NGQ and Cu‐nr had excellent synergistic effects for accelerating the reduction of CO₂ to alcohols.     

Linkage Effect in the Heterogenization of Cobalt Complexes by Doped Graphene for Electrocatalytic CO2 Reduction

Immobilization of planar Co^II‐2,3‐naphthalocyanine (NapCo) complexes onto doped graphene resulted in a heterogeneous molecular Co electrocatalyst that was active and selective to reduce CO₂ into CO in aqueous solution. A systematic study revealed that graphitic sulfoxide and carboxyl dopants of graphene were the efficient binding sites for the immobilization of NapCo through axial coordination and resulted in active Co sites for CO₂ reduction. Compared to carboxyl dopants, the sulfoxide dopants further improved the electron communication between NapCo and graphene, which led to the increase of turnover frequency of the Co sites by about 3 times for CO production with a Faradic efficiency up to 97 %. Pristine NapCo in the absence of a graphene support did not display efficient electron communication with the electrode and thus failed to serve as the electrochemical active site for CO₂ reduction under the identical conditions.     

Ultrathin two-dimensional triptycence-based metal-organic framework for highly selective CO2 electroreduction to CO

Efficient CO₂ reduction reaction (CO₂RR) is one of the important topics in energy and environment field, but improving the electrochemical selectivity of specific product is a great challenge. Herein, we reported a unprecedented two-dimensional (2D) metal?organic framework with CuO₄ unit (denoted as Cu-HHTT, HHTT = 9,10-dihydro-9,10-[1,2]benzenoanthracene-2,3,6,7,14,15-hexaol) as the electrocatalyst for CO₂RR. Cu-HHTT exhibits high performance for CO₂RR to produce CO, namely Faradaic efficiency of 96.6% toward CO with a current density of 18 mA/cm² at the potential of ?0.6 V vs. RHE. Density function theory reveals that the desorption of CO species exhibits a lower energy barrier than that of hydrogenation of *CO intermediate, resulting in CO as the main product instead of alcohols or hydrocarbons.