基于2,3-丁二酮双缩氨基硫脲为中性载体的新型银离子选择性电极的研究

研究了基于2,3-丁二酮双缩氨基硫脲为中性载体的聚氯乙烯(PVC)膜电极, 该电极对银离子(Ag^＋)具有优良的电位响应性能. 在pH＝3.0的NaOH-HNO₃体系中, 该电极对Ag^＋电极电位呈现近能斯特响应, 线性响应范围为3.0×10^－6～1.0×10^－2 mol/L, 斜率为52.6 mV/decade (20 ℃), 检测下限为1.0×10^－6 mol/L. 相对于常见的阳离子, 该电极对Ag^＋表现出良好的选择性. 采用交流阻抗技术研究了电极响应机理, 并将电极初步应用于回收率实验, 结果令人满意.     

模拟水中白铜B30耐蚀性影响因素的光电化学研究

用动电位伏安法和光电化学方法对模拟水中白铜B30耐蚀性影响因素进行了研究. 白铜B30表面膜显示p-型光响应, 光响应来自电极表面的Cu₂O层, 在模拟水溶液中表面膜的半导体性质会发生转变, 由p-型转为n-型; 在不同 Cl^－, SO₄^2－浓度的模拟水溶液中, 电位正向扫描时呈现阳极光电流, 电位负向扫描时随着Cl^－, SO₄^2－离子浓度的增加, 光响应由p-型向n-型转变, 阳极光电流峰面积与阴极光电流峰面积之比增大, 耐蚀性能降低; 随着温度的升高, 白铜B30的耐蚀性能降低; 在pH＝7～9之间, 其耐蚀性能随着pH的升高而提高, 当pH＞9时, 其耐蚀性能随着pH的升高呈降低趋势.     

基于N-十二酰基-l-脯氨酸为载体的对映异构PVC膜选择性电极的研制

合成了手性物质N-十二酰基-l-脯氨酸(N-DDO-l-Pro)(脯氨酸, Pro), 作为PVC膜电极的载体, 在PVC膜表面与被测试液中Cu(II)与脯氨酸形成的配合物[Cu(II)(l-Pro)₂]或[Cu(II)(d-Pro)₂]进行配体交换, 形成[(l-Pro)Cu(II) (N-DDO-l-Pro)]或[(d-Pro)Cu(II)(N-DDO-l-Pro)]配合物. 由于生成的配合物热力学稳定性不同, 电极能优先响应l-Pro, 线性范围10^－4～10^―1 mol•L^－1, 斜率57 mV•dec^－1, 检测限3.89×10^－5 mol•L^－1. 电极能够对脯氨酸进行手性检测, 其对映选择性系数lg为－3.19.     

缩氨基硫脲衍生物受体的合成及阴离子识别研究

利用简便的方法设计合成了三种缩氨基硫脲衍生物受体分子. 利用紫外-可见吸收光谱及¹H NMR考察了其与 F^－, Cl^－, Br^－, I^－, CH₃COO^－, C₃H₇COO^－, ClO₄^－, NO₃^－等阴离子的作用. 结果表明, 该类受体分子与阴离子形成氢键配合物, 加入F^－, CH₃COO^－, C₃H₇COO^－时, 溶液颜色由无色转变为黄色, 而加入其它阴离子则无变化, 从而实现对这三种阴离子的裸眼检测. 通过计算可知, 同种受体分子对此三种阴离子的作用为F^－＞C₃H₇COO^－＞CH₃COO^－. 随着苯环上取代基的变化, 此三种受体分子对三种阴离子的作用呈现出有规律的变化, 即o-F取代的受体分子对阴离子的识别作用大于其它两种受体分子, 且主客体间形成1∶1的配合物. ¹H NMR滴定及质子溶剂效应为受体分子与阴离子间的氢键作用本质提供了直接依据.     

长寿命高选择性液膜碘离子电极的研究

合成了PVC-双硫腙-Hg(Ⅱ)载体.以该载体物质制备了高选择性碘离子电极,其选择性次序为:I^-》ClO₄^->SCN^->NO₂^-》Sal^-～Br^->NO₃^->Cl^-.电极对碘离子的线性响应范围为1×10^-3～5×10^-7mol/L,检测下限为2×10^-7mol/L,斜率为(59±1)mV/decade(16℃).并研究了电极的响应机理,表明系碘离子与载体中金属汞原子直接作用.将该电极应用于食盐中碘的测定,取得了满意的结果.     

电沉积Cu2xIn2-2xSe2薄膜的光电化学研究

用电沉积法制得Cu_2xIn_2-2xSe₂(铜铟硒)(0[1]并用EDAX对其组成进行分析。对薄膜电极的光电化学性能、光谱响应、能隙与x的依赖关系进行了研究。借助于现场微区扫描光电流谱观察了热处理、薄膜厚度、光极化对薄膜电极的光电性能影响。研究了Pb(NO₃)₂有效的浸渍对薄膜光电性能的影响。     

基于香豆素343的荧光探针快速检测亚硫酸根

以香豆素343和2-苯并噻唑乙腈为原料,合成了香豆素343-亚硫酸根离子探针(Coumarin 343-SO₂),并用¹H NMR、¹³C NMR、MS和HRMS等技术手段对合成的化合物进行了表征。 该探针与亚硫酸根离子(SO₃^2-)发生亲核加成反应后,阻断了苯并噻唑与香豆素的共轭结构,从而引起荧光强度的变化,达到检测亚硫酸根离子的目的。 此探针对SO₃^2-具有响应快、高灵敏度、高选择性及检测限低至0.08 μmol/L的特点,其它常见的阴离子及还原性物质对SO₃^2-的检测均无干扰。 此外,该探针具有良好的细胞膜通透性,可用于活细胞中对SO₃^2-进行荧光成像。     

非金属氧化-还原对MO2/MO2-(M=N,S,Cl)的电子转移反应动力学

以Marcus-Hush电子转移理论为基础,提出了用量子化学密度泛函方法研究自交换和异交换电子转移反应的理论方案.在DFTB3LYP/6-311+G(2D)水平上研究了溶液中NO₂/NO₂^-,SO₂/SO₂^-和ClO₂/ClO₂^-等3个氧化-还原对的自交换以及它们之间的6个交叉电子转移反应的动力学性质,获得了与实验较为一致的结果.     

NH3与Cl2在y-Al2O3颗粒物表面的非均相反应

使用离子色谱分析了常温、常压、湿润和氧气存在条件下,NH₃和Cl₂在γ-Al₂O₃颗粒物表面非均相反应的产物及其受NH₃浓度、反应时间等的影响;并定量分析了NH₃、Cl₂、SO₂和NO₂单独及共存条件下,γ-Al₂O₃表面Cl^-、NO₃^-和SO₄^2-等二次无机颗粒物的生成总量.结果表明：NH₃和Cl₂在γ-Al₂O₃表面具有协同作用,2 h后Cl^-的生成总量可达589.65 μg,其生成量随时间延长而不断增加.表面氯化物的生成量在NH₃浓度为400 ppm时达到峰值,且随NH₃浓度的增加呈先增加而后减少的趋势.活性氯存在下,NH₃对颗粒物表面Cl^-、NO₃^-和SO₄^2-的生成有促进作用,且四种气体共存时复合正反馈效应最明显.同时,本研究对NH₃和Cl₂在颗粒物表面的非均相反应机理及活性氯和氨的排放对大气中二次无机颗粒物的贡献进行了探讨.     

SO42-/ZrO2和SO42-/Al2O3-ZrO2催化剂上的正戊烷反应

研究了添加Al对SO₄^2-/ZrO₂超强酸样品的晶化、比表面、硫含量、超强酸性和正戊烷反应性能的影响,考察了活化温度、反应温度、Al含量和载Pt对催化剂活性和选择性的影响.SO₄^2-/Al₂O₃ZrO₂催化剂的酸强度与SO₄^2-/ZrO₂基本相当,但超强酸位比后者多,未载Pt时正戊烷反应活性和稳定性明显高于后者.负载Pt后,正戊烷异构化选择性和稳定性大大提高,但Pt/SO₄^2-/Al₂O₃ZrO₂催化剂的反应活性与Pt/SO₄^2-/ZrO₂相近,Al的促进作用不明显.     

Highly Selective Thiocyanate Electrode Based on Bis‐bebzion Schiff Base Binuclear Copper(II) Complex as Neutral Carrier

Abstract

A highly selective polyvinyl chloride (PVC) membrane electrode, based on N,N′‐(aminoethyl)ethylenediamide bis(2‐benzoideneimine) binuclear copper(II) complex [Cu(II)‐AEBB] as neutral carrier, was prepared for thiocyanate (SCN^?) determination, which displays an anti‐Hofmeister selectivity sequence for a series of anions in the following order: SCN^?>ClO₄ ^?>Sal^? > I^?>NO₃ ^?>Br^?> Cl^?>NO₂ ^?>SO₃ ^2?>F^?>H₂PO₄ ^?>SO₄ ^2?. The electrode exhibited near‐Nernst response for SCN^? with a slope of –59.0 mV/decade over a wide concentration range (8.5×10^?7～6.8×10^?1 mol/L) with a detection limit of –5.0×10^?7 mol/L in pH 5.0 phosphate buffer solution at 25°C. Alternating current (AC) impedance and equivalent circuits were used to investigate the thiocyanate response mechanism of the membrane doped with [Cu(II)‐AEBB].     

牛磺酸双核铜络合物为载体的高选择性硫氰酸根离子电极的研究

本文报道了一种以牛磺酸双核铜络合物为中性载体的硫氰酸根PVC膜电极。该电极对硫氰酸根有良好的电位响应并呈现出anti-Hofmeister行为,其选择性顺序SCN^->I^->ClO₄^->Sal^->NO₃^-> NO₂^-> Br^- > Cl^- > SO₃^-> SO₄ ^2-。在20℃ pH 5.0的磷酸缓冲溶液中,其线性范围为1.0´10 ^-1~ 1.0´10^-6mol×L-1,检测线为8.0×10 ^-7mol•L^-1,斜率为 -56.5 mV/pcSCN^-。紫外、红外和交流阻抗研究表明电极的高选择性与载体的立体结构和分析物与中心金属离子的作用相关。将该电极用于废水和人体尿液中硫氰酸根的测定,获得了较满意的结果。     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

Highly selective thiocyanate electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) complex as neutral carrier

A novel selective thiocyanate PVC membrane electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) [Cu(II)₂–BBSTA] as neutral carrier is reported, which displays an anti-Hofmeister selectivity sequence in following order: SCN⁻ > ClO₄⁻ > I⁻ >Sal⁻ >SO₃²⁻ >NO₃⁻ > H₂PO₄⁻ > Cl⁻ >NO₂⁻ > SO₄²⁻. The electrode exhibits Nernstian potential linear range to thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ mol/l with a detection limit 7.0 × 10⁻⁷ mol/l and a slope of −57.0 mV/decade in pH 5.0 of phosphorate buffer solution at 25 °C. The response mechanism is discussed in view of the AC impedance technique and the UV spectroscopy technique. From comparison of potentiometric response characteristics between the binuclear metallic complex copper(II) [Cu(II)₂–BBSTA] and mononuclear copper(II) metallic complex [Cu(II)–BBSDA], an enhanced response towards thiocyanate from the electrode based on binuclear metallic complex copper (II) [Cu(II)₂–BBSTA] was observed. The electrode based on binuclear copper(II) compound was used to determine the thiocyanate content in waste water with satisfactory results.     

Thiocyanate: selective membrane electrode based on macrotricyclic binuclear Cu(II)–Schiff base complex

A highly selective PVC membrane electrode was prepared for thiocyanate (SCN^?) determination, based on macrotricyclic binuclear Cu(II)–Schiff base complex as an ionophore. The novel macrotricyclic compound (cryptand) was synthesized by condensation of 4,4′-diamino-dibenzo-18-crown-6 with bis(4-formyl phenyl)terephthalate under high-dilution condition and the structure was confirmed by FT-IR, ¹H NMR,¹³C NMR and MS studies. The Cu(II) complex of the compound was prepared and was examined for use as anion-selective electrode as a carrier which displays an anti-Hofmeister selectivity sequence in following order: SCN^? > ClO₄ ^? > NO₃ ^? > CN^? > I^? > CO₃ ^2? > NO₂ ^? > Br^? > Cl^? > SO₄ ^2? with a preference for thiocyanate ion over many common anions. The electrode has a linear dynamic range between 1.0 × 10^?7 and 1.0 × 10^?1 M, with a Nernstian slope of ?58.9 mV decade^?1 and detection limit of 3.1 × 10^?8 M. The working pH range of the sensor was found be in the range of 3.0–8.0. It exhibits a fast response time of 20 s and has a lifetime of about 2 months. Application of the electrode for determination of thiocyanate in waste water samples and in human urine samples have also been demonstrated.     

Thiocyanate-selective electrode based on N-salicylidene-benzylamineato copper(II) complex

Highly selective poly(vinyl chloride) (PVC) membrane electrode based on N-salicylidene-benzylamineato copper(II) complexes [Cu(SBA)₂] as new carriers towards thiocyanate-selective electrode was reported. The influence of membrane composition, pH and possible interfering anions were investigated on the response properties of the electrode. The resulting electrode exhibits anti-Hofmeister selectivity sequence: SCN⁻ > ClO₄⁻ > Sal⁻ > I⁻ > Br⁻ > NO₃⁻ > NO₂⁻ > SO₃²⁻ > H₂PO₄⁻ > Cl⁻ > SO₄²⁻, and a near-Nernstian potential linear range for thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ M with a detection limit of 7.0 10⁻⁷ M and a slope of , over a wide pH range of 3.0–9.0 in phosphate buffer solution at 20°C. The proposed electrode has a fast response time of about 5–10 s and can be used for at least 3 months without any considerable divergence in potential. The electrode was successfully applied to the determination of thiocyanate in waste water and human urine and saliva samples. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 3, pp. 293–299. The text was submitted by the authors in English.     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Study of a bis-furaldehyde Schiff base copper(II) complex as carrier for preparation of highly selective thiocyanate electrodes

A new highly selective thiocyanate electrode based on N,N-bis-(furaldehyde)-1,2-phenylenediamine-dipicolyl copper(II) complex [Cu(II)-BFPD] as neutral carrier is described. The electrode has an anti-Hofmeister selectivity sequence: SCN^–>I^–>Sal^–>ClO₄ ^–>Br^–>NO₂ ^–>Cl^–>NO₃ ^–>SO₄ ^2–>SO₃ ^2–>H₂PO₄ ^– and a near-Nernstian potential linear range for thiocyanate from 1.0×10^–1 to 5.0×10^–6 mol L^–1 with a detection limit 2.0×10^–6 mol L^–1 and a slope of 57.5 mV decade^–1 in pH 5.0 of phosphate buffer solution at 20 °C. The response mechanism is discussed on the basis of results from A.C. impedance measurement and UV spectroscopy. The anti-Hofmeister behavior of the electrode results from a direct interaction between the central metal and the analyte ion and a steric effect associated with the structure of the carrier. The electrode has the advantages of simplicity, fast response, fair stability and reproducibility, and low detection limit. The selectivity of electrodes based on [Cu(II)-BFPD] exceeds that of classical anion-sensitive membrane electrodes based on ion exchangers such as lipophilic quaternary ammonium or phosphonium salts. Application of the electrode for determination of thiocyanate in waste water samples from a laboratory and a gas factory, and in human urine samples, is reported. The results obtained were fair agreement with the results obtained by HPLC.     

A Novel Potentiometric Membrane Sensor Based on Aryl Palladium Complex for Selective Determination of Thiocyanate in the Saliva and Urine of Cigarette Smokers

A highly selective potentiometric sensor for thiocyanate ion based on the use of a newly synthesized organo‐palladium ion exchanger complex dispersed in a plasticized poly(vinyl chloride) membrane is described. The sensor displays a Nernstian response (?57.8±0.2 mV decade^?1) over a wide linear concentration range of thiocyanate (1.0×10^?6–1.0×10^?1 mol L^?1 ), low detection limit (6.3×10^?7 mol L^?1), fast response (20 s), stable potential readings (±0.4 mV), good reproducibility (±0.9%), long term stability (8 weeks), high precision (±0.7%) and applicability over a wide pH range (4–10). Negligible interferences are caused by F^?, Cl^?, I^?, Br^?, NO₃^?, NO₂^?, CN^?, SO₄^2?, S₂O₃^2?, PO₄^3?, citrate, acetate and oxalate ions. Under hydrodynamic mode of operation (FIA), the calibration slope is ?51.1±0.1 mV decade^?1, the linear response range is 1.0×10^?5–1.0×10^?1 mol L^?1 SCN^? and the sample throughput is 40–45 per hour. The sensor is satisfactory used for manual and flow injection potentiometric determination of SCN^? in the saliva and urine of cigarette smokers and non smokers. The data agree fairly well with results obtained by the standard spectrophotometric technique. Direct potentiometry and potentiometric titration of SCN^? with Ag⁺ are also monitored with the sensor.     

Highly Thiocyanate‐Selective PVC Membrane Electrode Based on Lipophilic Ferrocene Derivative

A novel anion‐selective PVC membrane electrode based on bis‐[(3‐ferrocenyl)‐(2‐crotonic acid)] copper(II) complex [Cu(II)‐BFCA] as neutral carrier is described, which demonstrates excellent potentiometric response characteristics toward thiocyanate ion and anti‐Hofmeister selectivity sequence in following order: SCN^?>I^?>ClO >Sal^?>Br^?>NO >Cl^?≈NO >SO >SO . The electrode shows a near‐Nernstian response for thiocyanate ion in a wide range of 9.0×10^?7–1.0×10^?1 M with a detection limit 6.8×10^?7 M and a slope of ?59.1 mV/decade in pH 5.0 of phosphate buffer solution at 20 °C. The influences of lipophilic cationic and anionic additives on the response properties of the electrode were investigated. High sensitivity and wide linear dynamic range were observed for the electrode in the presence of hexadecyltrimethylammoniumborate (HTAB) as a lipophilic cationic additive. The electrode was successfully applied to the determination of thiocyanate ion in waste water and human saliva.