Synthesis of 3,4-Biheterylthieno[2,3-b]-thiophenes. Part I: Synthesis of 3,4-Bi(1′,3′,4′-thiadiazolyl-, s-triazolyl-,1′,3′,4′-thiadiazinyl-, 1′,3′,4′-triazinyl-, thiazolyl-, 1′,3′-thiazinyl- and primidinyl)-thieno[2,3-b]thiophenes

3,4-Diamino-2,5-dicarbethoxythieno[2,3-b]thiophene ( 1 ) was allowed to react with NaNO 2 and active methylenes to afford the corresponding azo compounds 2a-c . Hydrazonyl chloride 2a was treated with carbon disulfide, phenyl isothiocyanate, benzonitrile, benzyl cyanide, malononitrile, benzalaniline, ethyl mercaptoacetate, and ethyl glycinate to give 1,3,4-thiadiazolyl-, s-triazolyl-, 1,3,4-thiadiazinyl-, 1,3,4-triazinylthieno[2,3-b]thiophenes 3-6 respectively. The reaction of 2b,c with urea, thiourea, and guanidine afforded pyrimidinyl- and thiazinylazothieno [2,3-b]thiophenes 7-10 respectively. Bithiazolylthieno[2,3-b]thiophenes 11 and 13 were synthesized by treating compound 1 with CS 2 along with halo compounds. The addition of S,S-, N,S-, and N,O-acetals to the Schiff base 14 afforded compounds 15-17 respectively.     

Palladium-Catalysed Amination of Hindered Aryl Halides with 9H-Carbazole

Palladium-catalysed Buchwald–Hartwig amination of ortho-substituted hindered aryl bromides or chlorides with 9H-carbazole has been investigated. In the amination of 1-bromo- or chloronaphthalene with 9H-carbazole, the combined use of Pd₂(dba)₃ as a Pd precursor, Buchwald ligands with two tert-butyl groups and LiOtBu or lithium hexamethyldisilazide as a base led to satisfactory yields. N,N’-Bis[2,6-bis(diphenylmethyl)-4-methoxyphenyl]imidazol-2-ylidene (IPr*^OMe), which is a bulky N-heterocyclic carbene ligand, showed similar activity as Buchwald ligands with two tert-butyl groups. In contrast, only IPr*^OMe provided satisfactory yields in the amination of 2-bromo-1,1′-biphenyl with 9H-carbazole. The amination of 2-bromo- or chlorotoluene and 1-(2-bromo- or chlorophenyl)naphthalene with 9H-carbazole proceeded smoothly when the IPr*^OMe ligand was used.     

Novel Bis-arylPheDOT Synthons for Electrochromic Polymers

Two terthiophenes incorporating the synthon 3,4-(1,2-phenylenedioxy)thiophene (PheDOT) have been developed. Specifically, 2,5-bisthienyl-3,4-(1,2-phenylenedioxy)thiophene (BTh-PheDOT 1) and 2,5-bisethylenedioxythienyl-3,4-(1,2-phenylenedioxy)thiophene (BEDOT-PheDOT 2) were electropolymerized to form electroactive polymer films (P1 and P2) that switched between two highly colored states with the more electron-rich EDOT derivative P2 observed to switch at a lower potential. Additionally, both P1 and P2 displayed moderate to low optical bandgaps of 1.8 and 1.6 eV, respectively. Crystal structures of BTh-PheDOT showed the monomer to be nearly planar with π -stacking observable between monomers. These findings demonstrate the potential of PheDOT as an electroactive synthon for the formation of well-ordered systems.     

Synthesis of a Novel Ligand Containing Phenyl Pyridine

In this article, we provide a new, efficient route to synthesize 2-[3-(3,4-bis(2-ethylhexyloxy)phenyl]phenyl pyridine ligand from readily available starting materials. The target compound was obtained by a condensation reaction and Suzuki coupling reaction. Structures of compounds were demonstrated by ¹H NMR, ¹³C NMR, and high-resolution mass spectrometry. The advantages of this synthetic route are simple operation, mild reaction conditions, and good yields.     

Comparative reactivity of thiophene and 3,4-(ethylenedioxy)thiophene as terminal electropolymerizable units in bis-heterocycle arylenes

The monomers bis(2-thienyl)-9,9-didecylfluorene, BTDF, and bis(3,4-(ethylenedioxy)thien-2-yl)-9,9-didecylfluorene, BEDOT-DF, have been synthesized and electropolymerized to the corresponding conducting polymers. The potential for the electropolymerization of BTDF was found to be dependent on the solvent composition. In CH₂Cl₂, polymer film deposition is achieved only at potentials higher than 1.3 V vs. Ag/Ag⁺, while in a 30/70 mixture of CH₂Cl₂/CH₃CN the polymerization is efficient at 0.9 V. BEDOT-DF polymerizes at significantly lower potentials and more rapidly than BTDF. The electron-donating alkoxy substituents of the EDOT units lead to stabilization of the cation radical intermediates allowing the electropolymerization to proceed at 0.55 V. The neutral polymers are insoluble in common organic solvents and are stable to 300°C under nitrogen. Upon oxidation, both polymers show two intragap transitions at intermediate doping levels due to the formation of bipolaronic states and the oxidized polymers exhibit conductivities up to 10⁻⁴ S/cm. The redox-stimulated ion transport characteristics, studied by the electrochemical quartz crystal microbalance (EQCM) indicates that the electrolyte anions are the dominant mobile species. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3627–3636, 1997     

3-取代和3,4-二取代噻吩的合成与表征

以噻吩、48% (m/m)氢溴酸水溶液、35% (m/m)过氧化氢水溶液、高纯氨、金属钠为原料合成了3-溴噻吩和3,4-二溴噻吩,3-溴噻吩和3,4-二溴噻吩分别以(dppp)NiCl2为催化剂合成了3-烷基噻吩和3,4-二烷基噻吩.3-溴噻吩以CuI, NaHSO4为催化剂合成了3-烷氧基噻吩,产率较高.并用核磁共振谱、质谱和元素分析方法进行了表征.     

Metal–organic supramolecular assemblies generated from bismuth(III) bromide and polyimine ligands

Three new BiBr₃ supramolecular complexes, [Bi₂(3-bpdb)₂Br₈]·(3-H₂bpdb) (1), [Bi₂(3-Hbpdh)₂Br₈] (2) and [Bi₂(4-bpdh)Br₉]·3(4-Hbpdh) (3) {3-bpdb = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene, 3-bpdh = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene and 4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene} were prepared by the reaction of bismuth(III) bromide with three organic nitrogen donor based ligands under thermal gradient conditions using the branched tube method. All three compounds were structurally characterized by single-crystal X-ray diffraction. In complex 1 the bismuth atoms are coordinated by one pyridyl nitrogen atom of the 3-bpdb ligand and are bridged by two bromide atoms to produce a dimeric complex. Compound 2 consists of dimeric units and the bismuth atoms are linked by one nitrogen atom of the 3-Hbpdh ligand and by five bromide atoms, and can be considered to be six-coordinate with a Br₅N array of donor atoms. The single-crystal X-ray data of compounds 1 and 3 show that the compounds contain two anionic and cationic 1D chains, [3-H₂bpdb]²⁺[Bi₂(3-bpdb)₂Br₈]²⁻ and 3[4-Hbpdh]⁺[Bi₂(4-bpdh)Br₉]³⁻. In all three compounds extensive hydrogen-bonding interactions produce supramolecular networks. The thermal stabilities of compounds 1–3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

A new two‐dimensional manganese(II) coordination polymer based on thiophene‐3,4‐dicarboxylic acid

A novel manganese coordination polymer, poly[(μ₅‐thiophene‐3,4‐dicarboxylato)manganese(II)], [Mn(C₆H₂O₄S)]_n, was synthesized hydrothermally using 3,4‐thiophenedicarboxylate (3,4‐tdc²⁻) as the organic linker. The asymmetric unit of the complex contains an Mn²⁺ cation and one half of a deprotonated 3,4‐tdc²⁻ anion, both residing on a twofold axis. Each Mn²⁺ centre is six‐coordinated by O atoms of bridging/chelating carboxylate groups from five 3,4‐tdc²⁻ anions, forming a slightly distorted octahedron. The Mn²⁺ centres are bridged by 3,4‐tdc²⁻ anions to give an infinite two‐dimensional layer which incorporates one‐dimensional Mn–O gridlike chains, and in which the 3,4‐tdc²⁻ anion adopts a novel hexadentate chelating and μ₅‐bridging coordination mode. The fully deprotonated 3,4‐tdc²⁻ anion exhibits unexpected efficiency as a ligand towards the Mn²⁺ centres, which it coordinates through all of its carboxylate O atoms to provide the novel coordination mode. The IR spectrum of the complex is also reported.     

邻甲基苯磺酸铜催化"一锅法"合成3,4-二氢嘧啶-2(1H)-酮

二氢嘧啶酮(DHPMs)及其衍生物具有广泛的生物活性,如抗病毒、抗肿瘤、抗癌、抗高血压及消炎等作用[1].此外,DHPMs及其衍生物作为钙通道阻滞剂、α1a-对抗剂和神经肽Y的对抗剂,显示出良好的药理活性[2].更重要的是,最近几种含二氢嘧啶酮-5-羧酸盐的海洋生物碱被成功分离出来,并表现出重要的生物学性质[3],某些可以阻止HIVgp-120-CD4键的形成,是一种潜在的HIV抑制剂[4].因此,对DHPMs及其衍生物的研究成为生物活性有机杂环化合物的研究热点之一.     

Highly modulated bisindoles: ligands for copper‐catalyzed Sonogashira reaction

Bisindoles (BIMs) were modulated as powerful N,N′ donor ligands for the copper‐catalyzed Sonogashira reaction. Ligand screening experiments on 11 BIM compounds found that 3,3′‐(4‐chlorophenyl)methylenebis(1‐methyl‐1H‐indole) (10%) efficiently accelerated CuCl (5%)‐catalyzed cross‐coupling of aryl iodides with terminal alkynes. A wide range of substituted aryl iodides and/or alkyl‐ and aryl‐substituted terminal alkynes were examined, leading to the corresponding coupling products with yields up to 99%. An efficient and scalable protocol for the synthesis of BIM ligands on a gram scale, with extremely low catalyst loading of o‐ClC₆H₄NH₃⁺Cl^?, was also developed with a reaction time of 20 min with yields up to 93%. This novel N,N′ ligand was air‐stable, easily available and highly modulated with low copper loading. Copyright © 2016 John Wiley & Sons, Ltd.     

氯化亚锡催化“一锅法”合成N1-取代的3,4-二氢嘧啶-2(1H)-酮

以芳香醛、乙酰乙酸乙酯(甲酯)、单取代脲为原料,氯化亚锡为催化剂,在无溶剂、80℃条件下,通过三组分"一锅法"合成了一系列N1-取代的3,4-二氢嘧啶-2(1H)-酮衍生物。考察了催化剂用量和反应温度对产品收率的影响。通过IR、~1H NMR、~(13)C NMR和元素分析对目标产物结构进行确证,提出了可能的催化作用机理。本文的合成方法具有催化剂活性高、廉价易得和反应时间短、条件温和、产率高、绿色环保等优点。     

A simple synthesis of the pentacyclic lamellarin skeleton from 3-nitro-2-(trifluoromethyl)-2H-chromenes and 1-methyl(benzyl)-3,4-dihydroisoquinolines

The basic structural framework of lamellarin alkaloids, 8,9-dihydro-6H-chromeno[4′,3′:4,5]pyrrolo[2,1-a]isoquinoline derivatives, has been obtained in good yields via Grob synthesis between 3-nitro-2-(trifluoromethyl)-2H-chromenes and 1-methyl-3,4-dihydroisoquinolines in refluxing isobutanol. In the case of 1-benzyl-3,4-dihydroisoquinolines, a dynamic NMR effect was observed in the ¹H and ¹⁹F NMR spectra of the products as a result of restricted rotation about the single bond linking the benzene ring and the heterocyclic system. When the reaction was carried out with 3-nitro-2-(trichloromethyl)-2H-chromenes in toluene at room temperature, only Michael adducts, as a mixture of two diastereomers, were isolated.     

Synthesis and evaluation of bipendant-armed (oligo)thiophene crown ether derivatives as new chemical sensors

Three new (oligo)thiophene bipendant-armed ligands 2a-c, derived from 2-(aminomethyl)-15-crown-5, have been synthesized and characterized. Compounds 2a-c were prepared by reductive amination of the corresponding macrocycle with formyl thiophene derivatives 1a-c in the presence of NaBH(OAc)₃ in fair to good yields. The photophysical properties of ligands 2a-c were studied and they were also evaluated as chemosensors in the presence of Na(I), Ag(I), Pd(II) and Hg(II) cations in acetonitrile solution.     

Design and synthesis of some new thiophene and 1,3,4-thiadiazole based heterocycles

Abstract

The reaction of 3-oxopropanenitriles with phenyl isothiocyanate in DMF containing KOH afforded the corresponding potassium salts. The latter salts were converted into ketene N,S-acetals upon acidification with hydrogen chloride. The reaction of the ketene N,S-acetals with 2-bromo-1-[5-methyl-1-(p-tolyl)-1H-1,2,3-triazol-4-yl]ethan-1-one or 3-(2-bromoacetyl)-2H-chromen-2-one gave novel thiophenes in good yields. Treatment of the ketene N,S-acetals with hydrazonyl halides afforded 1,3,4-thiadiazoles in good yields. The stereochemistry of the synthesized compounds was studied.     

Sonochemical syntheses and characterization of new nanorod crystals of mercury(II) metal–organic polymer generated from polyimine ligands

Nanorod crystals of two new mercury(II) [Hg(II)] coordination polymers, [Hg(4-bpdh)Br₂] _n (1) and [Hg(3-bpdh)Br₂] _n (2) {4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene and 3-bpdh = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene}, were prepared from the reaction of Hg(II) bromide with 4-bpdh and 3-bpdh by a sonochemical method. The nanorod crystals of 1 and 2 were characterized by scanning electron microscopy, X-ray powder diffraction, and IR spectroscopy. Compounds 1 and 2 were structurally characterized by single-crystal X-ray diffraction. The thermal stabilities of 1 and 2 were studied by thermal gravimetric and differential thermal analyses, which revealed that nanostructures of 1 and 2 are somewhat less stable than their bulk materials.     

Polyhydrazides based on 2,5-bis(4-carboxymethylene phenyl)-3,4-diphenyl thiophene

A series of polyhydrazides was synthesized from a novel dicarboxylic acid, 2,5-bis(4-carboxymethylene phenyl)-3,4-diphenyl thiophene (V) and or terephthalic acid and isophthaloyl or terephthaloyl dihydrazide by Yamazaki’s phosphorylation method using triphenyl phosphite as condensing agent. Polyhydrazides were characterized by IR spectroscopy solubility, viscosity, thermogravimetric analysis and X-ray diffraction studies.The polymers were obtained in quantitative yields. Polyhydrazides had viscosities in the range of 0.25-0.70 dL/g. The polymers derived from novel diacid (V) showed enhanced solubility than the polymers derived from terephthalic acid, which may be attributed to the presence to bulky pendant phenyl group and methylene spacer group in the polymer backbone. Polymers were soluble in most of the common aprotic polar solvents. Polyhydrazides showed considerable weight loss in the temperature range of 300-400 °C which is due to the cyclodehydration, leading to the formation of corresponding polyoxadiazoles. They showed T_max in between 500 and 600 °C which is essentially the decomposition of the polyoxadiazoles. X-ray diffraction studies showed that polyhydrazides were amorphous in nature.     

Synthesis of 4-(thien-2-yl)-substituted coumarins through Lewis acid catalyzed Michael addition of thiophenes to 3-benzoylcoumarins followed by oxidation

3-Benzoyl-4-(thien-2-yl)coumarins have been obtained in good yields according to the S_N^H addition–oxidation protocol, involving the diastereoselective addition of thiophenes at C-4 of 3-benzoylcoumarins under BBr₃ catalysis, followed by oxidation of the intermediate 3,4-trans-3-benzoyl-4-(thien-2-yl)-3,4-dihydrocoumarins with DDQ. This two-step procedure can be regarded as nucleophilic substitution of hydrogen (S_N^H) on the heterocyclic ring of coumarins.     

The synthesis and characterization of a poly(maleimide-ether) containing pendent thiophene rings

The preparation of a poly(maleimide-ether) containing pendent thiophene rings via the reaction of 2-(3-thienylmethyl)-1,3-N,N'-bis(3,4-dichloromaleimido) propane with 1,4-dihydroxybenzene is described. The novel 2-substituted-1,3-N,N'-bis(3,4-dichloromaleimido) propanes were obtained by allowing their corresponding diamine hydrochlorides to react with 3,4-dichloromaleic anhydride in acetic acid in the presence of sodium methoxide. The diamine hydrochlorides were prepared by the reduction of their respective diamides. The poly(maleimide-ether)s were fully characterized and ¹³C-NMR spectroscopy was used to confirm the microstructure of the materials. The properties of the thiophene substituted polymer are compared with model poly(maleimide-ether)s. Electrochemical studies indicated that the thiophene rings in the thiophene-substituted poly(maleimide-ether) were not electroactive. © 1992 John Wiley & Sons, Inc.     

Platinum(II)-Catalyzed Novel Synthesis of 3,4-Fused Furans

A novel synthesis of 3,4-fused furans (both tricyclic and bicyclic) through platinum-catalyzed cyclization of 3-(2-formylcycloalkenyl)-acrylic amides 2 in methanol is described (up to 90% yield). Tricyclic 3,4-fused dihydrofuran derivatives were also obtained via reductive cyclization of 2. The substrates 2 were obtained from β- bromovinyl aldehydes by a Pd-catalyzed Heck reaction.     

A highly enantioselective synthesis of 5-(l-menthyloxy )-4-substituted-3-chloro-2(5H )-furanones

In this paper, stereocontrolled tandem Michael addition-elimination reaction of the novel chiral source, 5-(l-menthyloxy)-3,4-dichloro-2(5H)-furanone, with various thiols and amines has been investigated. A series of new enantiomerically pure compounds, 5–(l-menthyloxy)-4-substituted-3-chloro-2(5H)-furanones, were obtained in good yields with d. e. ? 98% under mild conditions.