RI-UV双检测器GPC法测定SBS的分子量分布

SBS是一种新型的高分子材料,是苯乙烯-丁二烯的嵌段共聚物,它的聚苯乙烯(PS)段对紫外光有吸收,聚丁二烯(PB)段对紫外光无吸收。采用RI-UV(示差-紫外)双检测器GPC法同时测定此共聚物的分子量分布和组成分布,Runyon等在计算中假定:SBS分子的流体力学体积可看作相应组成的均聚物分子的流体力学体积之和,以及均聚物的校正曲线斜率相同,其SBS分子量的计算式为,     

多检测GPC/SEC技术在高分子表征中的应用Ⅴ.PS-PI二嵌段共聚物

采用体积排斥色谱法/示差折光指数/直角激光光散射/示差粘度三检测联用技术表征PS-PI二嵌段共聚物.计算了共聚物的均方末端距;验证了不同PS含量的PS-PI共聚物符合普适标定关系.结果表明在25 ℃的条件下,用体积排斥色谱法/示差折光指数/直角激光光散射/示差粘度三检测联用技术直接获得的PS-PI共聚物的特性粘数与用Ho-Duc方程计算得到的特性粘数基本吻合.     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

多检测GPC／SEC技术在高分子表征中的应用：V.PS—PI二嵌段共聚物

采用体积排斥色谱法／示差折光指数／直角激光光散射／示差粘度三检测联用技术表征ＰＳ－ＰＩ二嵌段共聚物。计算了共聚物的均方末端距〈γ＾２〉;验证了不同ＰＳ含量的ＰＳ－ＰＩ共聚物符合普适标定关系。结果表明在２５℃的条件下,用体积排斥色谱法／示差折光指数／直角激光光散标／示差粘度三检测联用技术直接获得ＰＳ－ＰＩ共聚物的特性粘度与用Ｈｏ－Ｄｕｃ方程计算得到的特性粘数基本吻合。     

多检测GPC／SEC技术在高分子表征中的应用——聚（α—甲基苯乙烯—异戊二烯）二嵌段共聚物的溶液性质

采用体积排斥色谱法(SEC)/示差折光指数(RI)/ -聚(α-甲基苯乙烯-异戊二烯)二嵌段共聚物的溶液性质直角激光光散射(RALLS)/示差粘度(DV)三检测联用技术,在THF为溶剂、25℃的条件下表征了聚(α-甲基苯乙烯-异戊二烯)(PαMS-PI)二嵌段共聚物;计算得到了PαMS-PI分子的无扰尺寸A为0.0778nm.mol     

多检测GPC/SEC技术在高分子表征中的应用Ⅳ.氘化高分子的溶液性质

采用体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测联用技术表征了氘化聚苯乙烯、聚苯乙烯和氘化聚苯乙烯－ 聚异戊二烯。结果表明,在θ条件下,虽然氘化聚苯乙烯的化学依赖性常数υＴ,ＤＰＳ比聚苯乙烯的化学依赖性常数υＴ,ＰＳ大,但２５ ℃时在四氢呋喃中,氘化聚苯乙烯的分子尺寸仍小于聚苯乙烯的分子尺寸。由于嵌段共聚物的淋洗体积随组成变化,所以用传统的ＳＥＣ／ＲＩ得不到准确的分子量。经比较膜渗透、小角激光光散射和基质辅助激光脱吸与离子化时间飞行质谱等的实验结果,证明体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测技术能准确地得到氘化二嵌段共聚物的分子量以及其它重要信息。     

嵌段共聚物PVCH-b-PE-b-PVCH的多重结晶行为

通过采用差示扫描量热仪(DSC)主要研究了结晶-非晶嵌段共聚物聚乙烯基环己烷-b-聚乙烯-聚乙烯基环己烷(PVCH-b-PE-b-PVCH)溶液结晶样品的熔融与非等温再结晶过程.探讨了溶液结晶样品中微相分离结构的形成对嵌段共聚物受限结晶的影响,并发现样品在熔融后的非等温结晶过程中出现了多重结晶峰.通过对嵌段共聚物有序、...     

分子水平研究不同嵌段结构苯乙烯/丁二烯共聚物的表面结构

利用具有准单分子层灵敏度的和频振动光谱(SFG)、原子力显微镜(AFM)和接触角(CA)测定技术研究链结构和溶剂对苯乙烯(S)/丁二烯(B)嵌段共聚物表面准分子层化学结构形成的影响.结果表明,两嵌段共聚物SB比三嵌段共聚物SBS更有利于聚丁二烯(PB)组分在膜表面富集.利用PB的选择性溶剂环己烷做溶剂时,SB膜表面层完全由纯的PB组分组成,而SBS表面则是聚苯乙烯(PS)与PB二组分共存.利用PS的选择性溶剂甲苯做溶剂时,SB与SBS表面都是PS与PB二组分共存,其中SBS表面PS组分的含量更高.原因是由于溶剂影响嵌段共聚物分子在溶液中的构象从而影响溶剂挥发后聚合物表面结构的形成.     

以高顺式聚丁二烯为软段的三嵌段共聚物的制备

从高顺式端羟基聚丁二烯(HTPB)出发,分别以ε-己内酯和苯乙烯为单体合成了2类以高顺式聚丁二烯为软段的三嵌段共聚物.以高顺式HTPB为大分子引发剂、辛酸亚锡为催化剂,引发ε-己内酯的开环聚合,合成了聚己内酯-b-聚丁二烯-b-聚己内酯三嵌段共聚物(CLBCL);通过高顺式HTPB末端羟基与2-溴代异丁酰溴(BBi B)间的酯化反应制备了ATRP大分子引发剂(Bi B-PB-Bi B),进而引发苯乙烯进行电子转移活化再生催化剂原子转移自由基聚合(ARGET ATRP)反应,合成了聚苯乙烯-b-聚丁二烯-b-聚苯乙烯三嵌段共聚物(SBS),反应具有较好的可控性,产物分子量分布较窄.通过红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和碳谱(13CNMR)、热重分析(TGA)和示差扫描量热分析(DSC)等对所制备共聚物的结构和性能进行了测试表征.TGA曲线表明,提高聚己内酯链段的含量,可在一定程度上提高CLBCL共聚物的热稳定性;SBS共聚物的热分解过程表现为一个阶段,与HTPB相比,其热稳定性略有提高.从CLBCL共聚物的DSC曲线上可明显观察到聚丁二烯链段的玻璃化转变温度和聚己内酯链段的熔点;SBS共聚物具有2个玻璃化转变温度,为–104.1和102.4oC,分别对应于聚丁二烯链段和聚苯乙烯链段的玻璃化转变温度.     

三嵌段共聚物和两嵌段共聚物在水溶液中共混自组装成多室胶束结构的耗散粒子动力学模拟(英文)

利用耗散粒子动力学模拟研究了在水溶液中混合不同的线形三嵌段共聚物AxByCz和线形两嵌段共聚物AmBn对多室胶束的形貌多样性的影响.通过改变线形的三嵌段共聚物和两嵌段共聚物的链长来寻找多室胶束的形成条件.由线形三嵌段共聚物和线形两嵌段共聚物的不同混合形成的多室胶束结构是多种多样的,例如"蠕虫状"胶束、"汉堡包"胶束、"球上球"胶束、"核-壳-壳"胶束等等.多室胶束的整体形貌和内部结构的控制都可以从线形三嵌段共聚物和两嵌段共聚物的二元共混得到.为了表征获得的多室胶束结构,我们计算了密度图和成对分布函数图.在此工作中,可以获得和观察到复杂的多室胶束.结果表明,简单地混合线形的三嵌段共聚物和线形的两嵌段共聚物是一个控制多室胶束形貌和结构的有效方法,在工程实验中可以更简单更经济地形成多室胶束结构.因此,在设计新的多室胶束方面,聚合物共混仍然是未来值得更加关注的一个话题.     

Densimeter detector in gel permeation chromatography of copolymers

A commercially available densimeter with a vibrating stainless steel tube was used as a detector in the GPC analysis of styrene/methyl methacrylate copolymers under normal GPC operational conditions. The densimeter was thermostated to ±0.001°C and sample injection concentrations were 4.0 mg/mL. The copolymer samples were polydisperse in molecular weight but uniform in composition. A refractive index detector and the densimeter detector produced comparable estimates of the parameters of the molecular weight distributions. The densimeter is less sensitive to the effects of variations in copolymer composition than differential refractive index or ultraviolet detectors. The only serious drawback to the densimeter is a relative lack of sensitivity. Variations in composition of styrene/methyl methacrylate copolymers over a fairly wide range have no signficant effect on the relation between gel permeation chromatographic elution volume and copolymer molecular weight. In general, however, conventional means of summarizing these data are not applicable to compositionally heterogeneous mixtures. Instrumental and data-handling solutions to this problem are discussed.     

Simultaneous determination of 20 food additives by high performance liquid chromatography with photo-diode array detector

An efficient and accurate analytical method was developed for the simultaneous determination of 20 synthetic food additives, including three sweeteners,seven food colorants,nine synthetic preservatives and caffeine,by high performance liquid chromatography (HPLC) with photodiode array detector(PDA).This method permits the detection of food additives at very low concentrations(0.005-0.150μg/mL).The applicability was verified by the determination of food additives present in various foodstuffs.     

Applications of a miniaturized fluorimetric photodiode array detector for capillary liquid chromatography

A high sensitivity, multichannel fluorescence detector with small volume has been developed for capillary column liquid chromatography. Using an intensified linear photodiode array to monitor fluorescence emission, several important mixtures exhibiting native fluorescence have been examined following high efficiency separation on a capillary column. By correlating mass spectral, fluorescence spectral, and retention time data, information of potential utility in the structural elucidation of aromatic molecules contained in complex mixtures can be obtained. Examples include the separation and spectral examination of the polyaromatic compounds in samples of both biological and environmental interest.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

“True” Concentration Determination Using a Concentration and Composition Sensitive Infrared Detector for Molecular Weight Characterization of Polyolefins

Summary: The infrared detector with a composition channel provides the ability to construct “true” concentration of the polyethylene-polypropylene copolymer and polymer blends to compensate the different infrared responses to each component. Using this “true” concentration constructed by the infrared detector, triple detector gel permeation chromatography (GPC) could generate conventional (by column calibration) and absolute (by laser light scattering) molecular weight and molecular weight distribution data comparable to data obtained by using the concentration obtained by a differential reflex index concentration detector. In addition to its unique feature of in-situ composition detection, the infrared detector in its mass detection mode possesses the advantages of faster equilibrium time, more stable baseline, less effect from temperature variation, and low sensitivity to moisture or air in the solvent.     

Click chemistry meets polymerization: Controlled incorporation of an easily accessible ruthenium(II) complex into a PMMA backbone via RAFT copolymerization

The copper(I)-catalyzed azide-alkyne cycloaddition provided an easy and efficient access to a functionalized heteroleptic ruthenium(II) complex monomer. A grafted copolymer with the heteroleptic ruthenium(II) complex and methyl methacrylate (MMA) as comonomer was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization. The product was characterized by means of ¹H NMR spectroscopy, UV/vis spectroscopy and size exclusion chromatography coupled with a photodiode array detector. The RAFT process itself led to a grafted copolymer with a low polydispersity index.     

Effect of refraction index and thickness of the light guide in the position-sensitive gamma-ray detector using compact PS-PMTs

We constructed a position-sensitive gamma-ray detector consisting of an array of BGO scintillators, a light guide and compact PS-PMTs. The effects of refractive index and thickness of the light guide of a glass plate on the detector performance were investigated. A light guide with higher refractive index and smaller thickness is found better for a good spatial resolution.     

高效液相色谱二极管阵列检测器测定氯氰菊酯

本文采用高效液相色谱法和二极管阵列检测器，分离了农药氯氰菊酯的四个同分异构体，同时利用色谱保留值规律和光谱特征吸收曲线综合进行定性分析，记录了每个组分的峰上坡，峰顶和峰下坡三个不同部分在２２０－３２０ｎｍ波段的光谱叠合图并进行比较，以确定峰的纯度，并测定了异构体的顺反比例。     

Microwave-induced plasma emission spectrophotometer combined with a photodiode array monitor for capillary column gas chromatography

A microwave-induced plasma emission spectrophotometric detector (MIPD) was used as an element-specific detector for capillary column gas chromatography. The atmospheric pressure microwave helium plasma generated with an original device called a SURFATRON was used as an atomization and excitation source. Combining a photodiode array spectrophotometer with the above system made the emission spectrophotometric detector very powerful. A wide range of spectra could be instantly monitored without any mechanical device. However, the spectrum of atmospheric helium emission plasma was complicated by the presence of air around the plasma discharge. An on-line background correction scheme was developed to handle such complicated spectra.     

Improved dual photometric-contactless conductometric detector for capillary electrophoresis

A new design of a dual, UV photometric - contactless conductometric detector is described. The separation capillary with an optical window created is pressed onto two semitubular electrodes, 3 mm wide and 2 mm apart. The electrodes form the detection cell of the contactless conductometric detector. An optical fiber, placed in the gap between the conductometric electrodes, brings radiation from the source. The radiation that passes through the separation capillary is recorded by a large-area photodiode. The optical fiber and the photodiode operate the photometric cell which is between the conductometric electrodes. The detector thus permits simultaneous photometric and conductometric detection in the same place of the capillary, while exchanging of the separation capillary is easy and without effect on the detector geometry and performance.