Comparison of adsorption performances of metal–chelated polyamide hollow fibre membranes in lysozyme separation

Commercially available microporous polyamide hollow fibres are modified by acid hydrolysis to activate the reactive groups and subsequently binding of the ligand, i.e. Cibacron Blue F3GA. Then the Cibacron Blue F3GA-derived hollow fibres were loaded with different metal ions (i.e. Zn(II), Cu(II), Ni(II)) to form the metal chelate. The internal polymer matrix was characterised by scanning electron microscopy. The effects of pH, initial concentration of lysozyme, metal type and temperature on the adsorption of lysozyme to the metal–chelated hollow fibres were examined in a batch reactor. The non-specific adsorption of lysozyme onto the polyamide hollow fibres was 1.8 mg/g. Cibacron Blue F3GA immobilisation increased the lysozyme adsorption up to 62.3 mg/g. Metal–chelated hollow fibres showed a significant increase of the adsorption efficiency. Lysozyme adsorption capacities of Zn(II), Cu(II) and Ni(II)-chelated hollow fibres were different. The maximum capacities of Zn(II), Cu(II) or Ni(II)-chelated hollow fibres were 144.2, 75.2 and 68.6 mg/g, respectively. Significant amount of the adsorbed lysozyme (up to 97%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. Repeated adsorption–desorption process showed that this novel metal–chelated polyamide hollow fibres are suitable for lysozyme adsorption.     

染料壳聚糖微球的制备及其对牛血清白蛋白(BSA)吸附性能的研究

采用反相悬浮交联法制备壳聚糖微球,对微球进行羟丙基氯化及氨基化,并偶联色素配体Cibacron Blue F3GA,得到一种新型染料亲和吸附剂.以牛血清白蛋白(BSA)为目标蛋白,考察了该染料亲和吸附剂的吸附性能,发现其对BSA有较高的吸附量(95.2mg/g),吸附行为满足Langmuir吸附等温式.负载牛血清白蛋白的微球容易洗脱,洗脱率高达99％.     

Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

染料壳聚糖微球的制备及其对人血清白蛋白吸附性能研究

人血清白蛋白(Human Serum Albumin,HSA)是血浆中含量最丰富的蛋白质,约占血浆总蛋白的60%.在人体内,HSA有许多重要的生理功能[1],临床上广泛应用于手术输血和危重病人补液,治疗创伤休克、烧伤、水肿和低白蛋白血症等,而且能增强人体抵抗能力,是迄今为止产量最大、临床用量最大     

辛巴蓝F-3GA修饰的啤酒废酵母菌亲和吸附溶菌酶

利用j嗪染料辛巴蓝F-3GA修饰经戊二醛交联的啤酒废酵母菌,得到一种新型染料亲和吸附剂.辛巴蓝F-3GA的固载量为161.1 mg/g.以溶菌酶为研究对象,考察吸附时间、酶初始浓度、pH值、离子强度等因素对吸附率的影响.结果表明:当pH=7.0时,其对溶菌酶有较高的吸附量(229.1 mg/g),吸附性能明显优于未接枝...     

High-performance liquid chromatography of amino acids, peptides and proteins. CIX. Investigations on the relation between the ligand density of cibacron blue immobilized porous and non-porous sorbents and protein-binding capacities and association constants.

A porous silica of nominal 5 microns particle diameter and 30 nm pore size (Nucleosil 300-5) and a non-porous silica of nominal 1.5 microns particle diameter were activated with 3-mercaptopropyltriethoxysilane (MPTS), followed by the immobilization of the triazine dye, Cibacron Blue F3GA. Various biomimetic dye sorbents with graduated ligand densities between 1 mumol/m2 and 0.01 mumol/m2 were prepared. The capacities and the association constants associated with the binding of lysozyme to these sorbents were determined by frontal analysis experiments [J. Chromatogr., 476 (1989) 205-225]. Due to the ability of the Cibacron Blue F3GA-modified silicas to act as mixed mode coulombic and hydrophobic interaction sorbents and the highly charged nature of the surface structure of lysozyme (pl 11), two mobile phase conditions were examined. In one case a 0.1 M phosphate buffer, pH 7.8, was used as the equilibration and loading buffer, in the second case 1 M sodium chloride-0.1 M phosphate buffer, pH 7.8 was employed as the equilibration and loading buffer to monitor the influence of ionic interactions. The elution was performed in each case with a 2.5 M potassium thiocyanate solution. With the porous silica dye sorbents and 1 M NaCl present in the loading buffer, the highest capacity was achieved when Cibacron Blue F3GA was immobilised to the level of 0.1 mumol/m2. In the case of the non-porous silica dye sorbents, the maximum protein capacity was achieved when 0.5 mumol/m2 dye were immobilised onto the support. Evaluation of the frontal breakthrough curves confirmed that the kinetics of adsorption of lysozyme onto the non-porous sorbent were substantially faster than the adsorption of lysozyme onto the porous sorbent due to the absence of pore diffusion effects in case of the non-porous support. Furthermore, the adsorption of lysozyme on both sorbents was faster when no salt was added to the loading buffer, indicating that there is either conformational or reorientation effects operating during the specific binding of the protein to the dye ligand, or that the interaction is proceeding through the participation of a second class of binding sites. The magnitude of the association constants, Ka, for the lysozyme-Cibacron Blue F3GA systems were found to be dependent on the ligand density of the sorbent. With decreasing ligand density, the protein-ligand interaction became stronger, e.g. Ka values became larger. These results confirm earlier observations on the effect of ligand steric compression on the affinate-ligand association constant, e.g. the protein needs sufficient space to interact with the ligand in an optimum way.(ABSTRACT TRUNCATED AT 400 WORDS)     

Adsorption of Human Serum Albumin onto PVA-coated Affinity Microporous PTFE Capillary

Affinity dye-ligand Cibacron Blue F3GA（CB F3GA） was covalently coupled with poly（vinyl alcohol）（PVA） coated on the inner surface of microporous poly（tetra-fluoroethylene）（MPTFE） membranous capillary. The PVA-coated PTFE capillary surface was characterized by XPS and FESEM. The grafting degree of PVA and the amount of CB F3GA immobilized onto the membranous capillary were 23.5 mg/g and 89.6 pmol/g, respectively. These dyed membranous capillaries were chemically and mechanically stable, and could be reproducibly prepared. Human serum albumin（HSA） was selected as model protein. The saturation adsorbance of the dye attached membranous capillary was 85.3 mg HSA/g, while the capacity of non-specific adsorption for HSA was less than 0.3 mg/g.     

Dye affinity hollow fibers for albumin purification

Reactive Green HE 4BD was immobilized on polyamide (PA) hollow fibers for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Reactive Green HE 4BD were incorporated on the PA hollow fibers by changing the dye attachment conditions, i.e. the initial dye concentration and the addition of sodium carbonate and sodium chloride. The maximum amount of dye attachment was obtained as 39.4 micromol x g(-1) when the hollow fibers were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and dye-attached hollow fibers was investigated batchwise. The non-specific adsorption of HSA was low (6.0 mg/g hollow fiber). Dye attachment onto the hollow fibers significantly increased the HSA adsorption (86.7 mg/g). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (198 mg HSA/g). The desorptions were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl to the HSA solutions in which adsorption equilibria had been reached. The desorption results demonstrated that the adsorption of HSA to the adsorbent was reversible. Chemical structure of Reactive Green HE-4BD.     

Albumin separation with Cibacron Blue carrying macroporous chitosan and chitin affinity membranes

Cibacron Blue F3GA, Procion Red HE-3B and Procion Blue MX-R were immobilized on macroporous chitosan and chitin membranes with concentrations as high as 10–200 μmol/ml membrane. These dyed membranes were chemically and mechanically stable, could be reproducibly prepared, and operated at high flow rates. Human serum albumin (HSA) and bovine serum albumin (BSA) were selected as model proteins, and their adsorption on and desorption from the dyed chitosan membranes investigated. The Cibacron Blue F3GA membranes had a higher protein adsorption capacity, much greater for HSA than BSA, than the other dyed membranes. About 8.4 mg HSA/ml membrane were adsorbed at saturation by Cibacron Blue F3GA–chitosan membranes from a 0.05 M Tris–HCl/0.05 M NaCl, pH 8 solution. The chitin membranes had a lower dye content and hence a lower protein adsorption capacity than the chitosan membranes. The effects of important operation parameters (flow rate, protein concentration and loading) were also investigated. Cibacron Blue F3GA–chitosan membranes were employed for the separation of HSA from human plasma and high purity HSA thus obtained. This suggests that these membranes could be used for large-scale plasma fractionation.     

Lipase bound cellulose nanofibrous membrane via Cibacron Blue F3GA affinity ligand

Cellulose (Cell) nanofibrous membranes were prepared by nucleophilic reaction of the cellulose hydroxyl with the triazinyl chloride of Cibacron Blue F3GA (CB) ligand and studied as affinity membranes for lipase enzyme. Cell nanofibrous membranes containing fibers with 200 nm average diameters were prepared by electrospinning of cellulose acetate (CA), followed by alkaline hydrolysis. The CB capacity of the Cell nanofibrous membranes was optimized by lengthening the nucleophilic reaction time and increasing CB concentration and ionic strength. The equilibrium adsorption isotherms of CB on the Cell nanofibrous membranes followed a typical Langmuir monolayer adsorption behavior. At 242 mg CB/g of Cell, the maximum lipase adsorption capacity (q_m) and the dissociation constant (K_d) values were 41.02 mg/g and 0.25 mg/mL, respectively. Optimal lipase adsorption capacity was obtained at pH 4.0, its isoelectric point, with added NaCl on Cell membranes 86 mg CB capacity per g of Cell. A facile lipase loading capacity of 16.21 mg/g of CB–Cell was achieved under moderated conditions and could be optimized to reach at least 150 mg/g. The CB–Cell bound lipase had similar catalytic rate and retained 86.2% activity as in its free form. These findings clearly show that the CB bound Cell nanofibrous membrane is a highly efficient ultra-high specific porous support for lipase enzyme and is potentially versatile for immobilizing other enzymes and as affinity membrane for proteins.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Preparation of Cibacron Blue F3GA Bonded Poly (styrenedivinylbenzene) (PSDVB) Microbeads Used for High Performance Affinity Chromatography

Recentlyhighperformanceliquidaffinitychr0mat0graphy(HPLAC)hasdevel0pedveryquickly.HPLACcombinesthespeedandres0lvingp0werofHPLCwithbiol0gicalspecificityofaffinitychromatographyandhasbeenwidelyusedasananalyticalt00linbiochemicalresearch.CibacronBIueF3GAisthem0stwideIyusedreactivetriazine-baseddyewhichhasspecificinteracti0nwithpyridinenucleotide-dependentdehydr0genase,kinase,blo0dproteinsandotherpr0teinsandenzymes'.ltisasuitabIeHPLACligandbecauseofitsreactivityandchemicaIstability.Inthi…     

Cyclodextrin biospecific-like displacement in dye-affinity chromatography

Interactions between Cibacron Blue F3GA (CB F3GA), as a model of triazine dye, and 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD), as a model of cyclodextrin, were investigated by monitoring the spectral shift that accompanies the binding phenomena. Matrix analysis of the difference spectral titration of CB F3GA with HP-beta-CD revealed only two absorbing species, indicating a host-guest ratio of 1:1. The dissociation constant for this HP-beta-CD-CB F3GA complex, Kd, was found to be 0.43 mM. The data for HP-beta-CD forming inclusion complexes with CB F3GA were used to develop the concept of competitive elution by inclusion complexes in dye-affinity chromatography. When this concept was applied to the elution of L-lactate dehydrogenase from a CB F3GA affinity matrix, it was shown to be an effective elution strategy. It provided a 15-fold purification factor with 89% recovery and sharp elution profile (0.8 column volumes for 80% recovery), which is as good as that obtained by specific elution with NADH (16-fold, 78% recovery and 1.8 column volumes). In addition, the new elution strategy showed a better purification factor and sharper elution profile than traditional non-specific elution with KCl (4.5-fold, and 1.4 column volumes). Hence, competitive elution by inclusion complexes may be a promising strategy for eluting proteins with high recoveries and purification factors in dye-affinity chromatography.     

Impact of double cryogelation process on a macroporous dye-affinity hydrogel

Cryogels with interconnected channels allow high flow-through properties and mass transfer when dealing with complex mixtures such as non-clarified crude extracts. However, their mechanical strength can be challenged due to a large void volume inside the polymeric network. We have addressed this problem by forming a double-layer cryogel applied as a dye-affinity chromatography gel. In this study, poly(acrylamide-co-allyl glycidyl ether) cryogel was prepared at sub-zero temperature. The second layer was then prepared inside the primary cryogel under the same conditions to form a double-layer network. Cibacron Blue F3GA, a dye molecule, was immobilized on the surface of the cryogels. Bovine serum albumin was used as a model molecule to study the adsorption/elution procedure in batch and continuous modes. The maximum batch binding capacity and the dynamic binding capacity for the single-layer cryogel were 18 and 0.11, and for the double-layer cryogel were 7.5 and 0.9 mg/g of gel, respectively. However, the mechanical stability of the double-layer cryogel increased 7-fold (144 kPa). It was found that the kinetic and adsorption isotherms follow pseudo-second-order and Freundlich models, respectively. The regeneration of the columns after adsorption/elution cycles was evaluated, and no significant loss of capacity was observed after 10 cycles.     

染料膜亲和色谱法中膜堆的制备及应用

将染料亲和配基偶联于大孔纤维素膜上,所得亲和膜用胶粘法制成亲和膜堆,膜堆的通透性远优于通常的亲和色谱柱。装有蓝色和红色亲和膜的膜堆可分别用于人血清白蛋白和碱性磷酸酯酶的分离纯化,其中碱性磷酸酯酶可在一步操作后纯化４０倍。     

白蛋白在以染料为配基的醋酸纤维滤棒上的等温吸附行为(英文)

 以醋酸纤维滤棒为基质 ,染料CibacronBlueF3GA为配基 ,合成了一种新的染料亲和介质 ;分别以牛血清白蛋白 (BSA)和人血清白蛋白 (HSA)为对象 ,用静态法进行了吸附实验 ,得到了相应的亲和等温吸附曲线 ;对曲线按Langmuir模型和Freundlich模型分别进行拟合 ;结果表明 ,醋酸纤维滤棒染料亲和介质对BSA和HSA的等温吸附遵循Freundlich模型。采用该亲和介质装柱并分离实际样品人血浆 ,可得到纯化的人血清白蛋白。     

活性蓝F3GA固载的无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯亲和色谱填料的制备与应用

以3.0 μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂为基质,与三嗪染料活性蓝F3GA(Cibacron Blue F3GA)反应,制备出 一种固定化染料聚合物高效亲和色谱填料。考察了应用该填料时流动相中的盐离子浓度、有机溶剂及流速等对牛血清白蛋白(BSA)和 溶菌酶(Lys)保留行为的影响。实验结果表明,该染料亲和填料具有良好的色谱性能。利用前沿色谱法测定了染料与溶菌酶之间的表观 解离常数为5.26×10-5 mol/L。使用该填料成功地从鸡蛋清和小牛血清中分别分离纯化了Lys和BSA,十二烷基硫酸钠-聚丙烯酰胺凝胶 电泳(SDS-PAGE)分析显示Lys和BSA的纯度分别为95%和92%。     

High-performance liquid chromatography of proteins: purification of alpha-fetoprotein from fetal calf serum

High-performance liquid chromatography was utilized for the purification of bovine alpha-fetoprotein (BAFP) from fetal calf serum (FCS). An initial step in the purification involved absorption of charcoal delipidated FCS on Cibacron Blue F3GA gel. The Cibacron Blue pre-purified FCS was then chromatographed on a Polyanion SI weak anion-exchange column. The BAFP isolated had a purity of greater than 93% with an overall yield of 48% from FCS. The procedure was applicable for semi-preparative scale purification of BAFP.     

Determination of the Dissociation Constant and Stoichiometry of a Complex of the Protein Interferon α-2b with Cibacron Blue F3G-A

The nonlinear least-squares technique was used for determining the complexation parameters of the recombinant human cytokine interferon -2b with a pseudobiospecific ligand, Cibacron Blue F3G-A. The dissociation constant of the complex and the number of ligand–protein binding sites were found.     

壳聚糖亲和磁性毫微粒的制备及其对蛋白质的吸附性能研究

以壳聚糖为包裹材料包埋自制的磁流体 ,制备了具有核 壳结构的磁性毫微粒 ,并偶联色素配基CibacronBlue 3GA(偶联量 1 4 .5μmol/mL)得到了一种新型亲和磁性毫微粒 .结果表明 ,所得亲和磁性微球具有较窄的粒径分布、形状规整 .以牛血清白蛋白 (BSA)和溶菌酶 (Lys)为目标蛋白 ,考察了该亲和磁性毫微粒的吸附性能 ,发现其对BSA和Lys的吸附量分别为 4和 2 8mg/g,吸附行为满足Langmuir吸附等温式 ,且对时间依赖性小而对溶液离子强度敏感 .