182Hf实验室参考标准的研制与加速器质谱测量

介绍了用于HI-13串列加速器质谱(AMS)测量的¹⁸²Hf实验室参考标准的研制. 通过¹⁸⁰Hf的连续热中子俘获产生¹⁸²Hf, 用热电离质谱对初始参考标准的同位素比进行了精确测量. 取一定量的初始参考标准, 加入已知量的稳定同位素(¹⁸⁰Hf)作为稀释剂, 通过逐级稀释的方法, 最终得到同位素比从10^－6—10^－10的一系列参考标准. 并对该系列参考标准进行了AMS测量, 结果显示¹⁸²Hf/¹⁸⁰Hf的测量值与标称值呈良好的线性关系, 说明该AMS系统可以准确测量同位素比在10^－6—10^－10范围内的样品.     

利用加速器质谱计测量10Be形成截面

加速器质谱计具有很高的灵敏度,能测量样品中含量极微的杂质同位素.¹⁰Be是一种宇宙成因核,在地学、环境科学和宇宙学等领域有广泛的应用,它为纯β衰变核,端点能量低且半衰期很长.采用测量剩余核放射性方法确定¹⁰Be形成截面很困难.本文报道利用加速器质谱计技术测量¹⁰Be反应总截面的方法和结果,并对应用前景作了讨论.     

基于CaF2靶样的加速器质谱测量生物样品中41Ca的方法研究

为满足⁴¹Ca生物示踪样品测量的需要, 在北京HI-13串列加速器质谱(Accelerator Mass Spectrometry, AMS)系统上建立了以CaF₂为靶样的⁴¹Ca AMS分析方法.生物样品和⁴¹Ca标准样品经过化学分离和纯化, 制备成CaF₂作为靶物质. AMS测量⁴¹Ca时, 离子源引出CaF₃-负离子, 膜剥离后的电荷态选择为7⁺态, 加速器端电压选定为8.5MV, 用充有140mbar P10气体的多阳极电离室探测⁴¹Ca. 结果显示探测器可实现对⁴¹Ca与同量异位素干扰⁴¹K的分辨, 粒子谱中⁴¹K的计数率很低,对⁴¹Ca不形成干扰. 对制备的4个标准样品(⁴¹Ca/⁴⁰Ca在1.785×10^－8—1.750×10^－10范围)的测量结果显示⁴¹Ca/⁴⁰Ca绝对测量值与标称值之间的线性关系良好(r²=0.997),经⁴¹Ca/⁴⁰Ca为1.785×10^－8的标准样品归一化后, S2, S4两个标样的测量值与标称值吻合较好, 但标样S3的测量值与标称值有较大偏离. 估计生物样品的⁴¹Ca/⁴⁰Ca本底值低于8.2×10^－13.     

加速器质谱测量182Hf的效率研究

182Hf是长寿命放射性核素,其半衰期约为9×106 a. 测量环境样品中的182Hf对核天体物理学和核工程的研究具有重要的意义. 加速器质谱(AMS)作为一门超高灵敏核分析技术,可以测量样品中极其微量的182 Hf. 本工作在中国原子能科学研究院HI 13串列加速器核物理国家实验室的AMS装置上对182 Hf的AMS效率进行了测量,得到了初步的测量结果.     

175Hf核ε衰变的IXK/Iγ(343keV)比值计算和分析及其辐射数据计算

简要地介绍了¹⁷⁵Hf核ε衰变的I_XK/I_γ(343keV)比值的计算方法与实验测量的比较与分析,并在此基础上,计算得到了P_γ(343keV)=0.869±0.004,还给出了¹⁷⁵Hf核ε衰变的辐射数据的计算与推荐     

187Au的能级结构及单质子与偶–偶核芯的耦合特性

利用¹⁷⁷Hf(¹⁹F,9n)¹⁸⁷T1反应和在线同位素分离法,对¹⁸⁷Au低激发态能级结构进行了γ–γ符合与γ–e符合的测量分析,束流能量为175MeV,发现了多条新的跃迁,测量了内转换系数,扩展了¹⁸⁷Au的能级图.对¹⁸⁷Au低激发态下的集体带结构、单质子与不同偶–偶核芯的耦合特性进行了讨论.     

太阳核心中7Be电子俘获几率的计算

在太阳核心的条件下,⁷Be原子被完全电离.所以,重新计算的⁷Be和⁸B太阳中微子流强分别约为4.00×10⁹cm^－2·s^－1和6.18×10⁶cm^－2·s^－1,而标准太阳模型预言的⁷Be和⁸B太阳中微子流强则分别是4.80×10⁹cm^－2·s^－1和5.15×10⁶cm^－2·s^－1.这将进一步增大在Super Kamiokande太阳中微子实验上中微子流强的实验测量值与理论预计值之间的差异.     

新丰中子同位素:186Hf

在兰州重离子加速器(FDUL)上,用60MeV/μ ¹⁸O离子轰击厚天然钨靶,通过多核子转移反应产生¹⁸⁶Hf. 使用放射化学分离技术从钨和反应产物混和物中分离出铪,并由HPGe探测器测量铪样品的活性.观测到了¹⁸⁶Hf的子体¹⁸⁶Ta的737,5keVY射线的增长、衰变行为,结果表明,本实验首次合成并鉴别了新丰中子同位素¹⁸⁶Hf,测得它的半衰期为(2.6±1.2)min.     

铪的新同位素:186Hf

利用兰州重离子加速器提供的60MeV/u的¹⁸O离子束轰击天然钨靶,通过奇异的多核子转移反应生成¹⁸⁶Hf.采用快速放射化学分离技术从钨及反应产物的混合物中分离出铪,由高纯锗(HPGe)探测器测量样品的γ活性,观测到了¹⁸⁶Hf的子体¹⁸⁶Taγ活性的生长、衰变行为.由此表明:本实验首次合成并鉴别了重丰中子新核素¹⁸⁶Hf,并测定它的半衰期为(2.6±1.2)min.     

J/ψ共振参数的测定

利用北京正负电子对撞机(BEPC)和北京谱仪(BES),测量了e+e－对撞束在J/ψ共振峰附近能区内末态为强子、e⁺e^－和μ⁺μ^－的实验观测截面,对这些截面的拟合得到J/ψ衰变宽度和分支比的新的实验测定值:Γ=84.4±8.9keV,Γh =74.1±8.1keV,Γe=5.14±0.39keV,Γμ=5.13±0.52keV, /=(87.8±0.5)%,Γe/Γ=(6.09±0.33)%,Γh/Γ=(6.08±0.33)%.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.