Bismuth as an additive modifying the selectivity of palladium catalysts

The influence of bismuth addition on the activity and selectivity of palladium catalysts supported on SiO₂ in the reaction of glucose oxidation to gluconic acid was studied. The catalysts modified with Bi show much better selectivity and activity than palladium catalysts. The XRD studies proved the presence of intermetallic compounds BiPd and Bi₂Pd, which probably increase activity and selectivity of PdBi/SiO₂ catalysts in the oxidation of glucose. The TPO studies of catalysts containing 5 wt.% Pd/SiO₂, 3 wt.% Bi/SiO₂ and 5 wt.% Pd–5 wt.% Bi/SiO₂ show that palladium oxidation occurs at much higher temperatures than in the case of bismuth. The maximum rate of Pd oxidation occurs at around 580 K while the maximum rate of Bi oxidation takes place at around 430 K. Considering the above facts, a reaction involving bimetallic catalysts in oxidizing atmosphere at 333 K should not lead to surface oxidation of palladium and thus their deactivation.     

Bismuth modified Pd/C as catalysts for hydrogen related reactions

The electrocatalytic activity of bimetallic BiPd catalysts supported on Sibunit carbon towards hydrogen oxidation/evolution reactions (HOR/HER) was studied in a gas diffusion electrode (GDE) setup. Catalysts were synthesized by deposition of Pd on the carbon support, followed by impregnation of Pd/C precursor with Bi(NO₃)₃ solution and reduction in hydrogen. Transmission electron microscopy and local EDX elemental analysis revealed that BiPd/C catalysts contain bimetallic particles with narrow size distribution with maxima at 3.2–4.1 nm. X-ray diffraction evidenced that bimetallic particles are constituted by Pd–Bi solid solution. It was shown that modification of Pd/C by bismuth increases the specific activity of palladium towards HOR/HER by a factor of 3.     

(K,Mo)Y分子筛中钼组分的EXAFS研究

应用同步辐射Extended X-ray Absorption Fine Structure (EXAFS)技术研究固态法制备的KHMoY分子筛的氧化态和硫化态样品以及硫化态KHY/MoO3样品中钼组分的局域配位环境结构,并与KHMoY和KHY/MoO3样品催化加氢活性结果进行对照.结果表明,随原子比(K+2Mo)/Al的变化,钼原子周围的配位环境有显著的差异.当(K+2Mo)/Al＜1时,KHMoY和KHY/MoO3硫化后,钼组分主要以MoS2小原子簇分散在分子筛超笼中;(K+2Mo)/Al＞1时,钼组分则有两种存在环境,即分子筛超笼中的和分子筛外表面的钼组分.分子筛超笼中的MoS2原子簇的催化加氢合成醇选择性较高;分子筛外表面的MoS2微小颗粒的尺寸相对于超笼中的要大许多,其合成醇选择性较低.     

Impact of palladium silicide formation on the catalytic properties of Pd/SiO2 catalysts in liquid-phase semihydrogenation of phenylacetylene

In this study, palladium silicide was formed on the sol–gel derived SiO₂ supported Pd catalysts when they were prepared by ion-exchange method using Pd(NH₃)₄Cl₂ as a palladium precursor. No other palladium phases (PdO or Pd⁰) were evident after calcinations at 450 °C for 3 h. The Pd/SiO₂ catalysts with Pd silicide formation were found to exhibit superior performance than commercial SiO₂ supported ones in liquid-phase semihydrogenation of phenylacetylene. From XPS results, the binding energy of Pd 3d of palladium silicide on the Pd/SiO₂ catalyst shifted toward larger binging energy, indicating that Pd is electron deficient. This could probably result in an inhibition of a product styrene on the Pd surface and hence high styrene selectivities were obtained at high phenylacetylene conversions. The formation of Pd silicide, however, did not have much impact on specific activity of the Pd catalysts since the TOFs were quite similar among the various catalysts with or without palladium silicides if their average particle sizes were large enough. The TOFs decreased by an order of magnitude when palladium dispersion was very high and their average particle sizes were smaller than 3–5 nm.     

FTIR studies of zeolite matrix effects on the properties of palladium clusters confined in the supercages of NaX and NaY

Palladium clusters have been synthesized by the "ship-in-a-bottle" approach in the supercages of NaX and NaY faujasite zeolites. In comparison with CO adsorbed on a bulk Pd electrode, the same molecule adsorbed on the Pd clusters electrodes evoked an enhanced IR absorption (EIRA). The enhancement factors have been determined to be about 38 and 51 in NaX and NaY, respectively. IR band centers of linear-bonded CO, bridge-bonded CO, and multi-bonded CO in NaX are measured, respectively, 12, 14, and 11 cm(-1) lower than those of the corresponding adsorption modes in NaY. The adsorption of CO and the oxidation of adsorbed CO in NaX matrix are faster than that in NaY matrix. These results suggest that part of the Pd2+ ions in NaX are located in sites III and III' that are near the 12-ring window of the supercage of zeolite, which lead to the formation of small Pd clusters. The present study is of significant importance in exploring the dependence of catalyst properties on structures, as well as in understanding and predicting the locations and properties of metal clusters in zeolites.     

Preparation,characterization and catalytic activity of MoO3/CeO2–ZrO2 solid heterogeneous catalyst for the synthesis of β-enaminones

A series of CeO₂–ZrO₂ with different molybdenum (8–20 wt% MoO₃) loaded materials were prepared by homogeneous co-precipitation followed by impregnation method. The prepared materials were tested for their catalytic activity performance in the synthesis of β-enaminones by condensation of various anilines with dimedone under solvent-free conditions in microwave providing excellent yields within short reaction time. An obtained result reveals that, catalytic activity increases with increase in Mo wt% loading. The particle size of prepared materials was estimated using Debye–Scherrer equation. Particle size increases with increase in Mo wt% loading providing nanosized particle ranging from 7.11 to 42.09 nm. The synthesized materials were characterized by means of X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Hydrodechlorination of CCl4 over carbon-supported palladium–gold catalysts prepared by the reverse “water-in-oil” microemulsion method

Two series of carbon-supported Pd–Au catalysts were prepared by the reverse “water-in-oil, W/O” method, characterized by various techniques and investigated in the reaction of tetrachloromethane with hydrogen at 423 K. The synthesized nanoparticles were reasonably monodispersed having an average diameter of 4–6 nm (Pd/C and Pd–Au/C) and 9 nm (Au/C). Monometallic palladium catalysts quickly deactivated during the hydrodehalogenation of CCl₄. Palladium–gold catalysts with molar ratio Pd:Au = 90:10 and 85:15 were stable and much more active than the monometallic palladium and Au-richer Pd–Au catalysts. The selectivity toward chlorine-free hydrocarbons (especially for C₂₊ hydrocarbons) was increased upon introducing small amounts of gold to palladium. Simultaneously, for the most active Pd–Au catalysts, the selectivity for undesired dimers C₂H_xCl_y, which are considered as coke precursors, was much lower than for monometallic Pd catalysts. Reasons for synergistic effects are discussed. During CCl₄ hydrodechlorination the Pd/C and Pd–Au/C catalysts were subjected to bulk carbiding.     

Synthesis and reactions of heterodinuclear organopalladium–cobalt complexes acting as copolymerization catalyst for aziridine and carbon monoxide

A series of heterodinuclear acylpalladium–cobalt complexes having a bidentate nitrogen ligand, L₂(RCO)Pd–Co(CO)₄ (L₂ = bpy, R = Me (5), Ph (6); L₂ = tmeda, R = Me (7), Ph (8); L₂ = phen, R = Me (9), Ph (10)) are prepared by metathetical reactions of PdRIL₂ with Na⁺[Co(CO)₄]⁻ followed by treatment with CO. These complexes are characterized by NMR and IR spectroscopies and elemental analyses, and the molecular structures of 6, 8, and 9 are determined by X-ray structure analysis. Geometry at Pd is essentially square planar and the Co atom is considered to have d¹⁰ tetrahedral structure, where cobalt(-I) anion coordinates to palladium(II) cation. Heterodinuclear organopalladium–cobalt complexes are shown to catalyze copolymerization of aziridines and CO under mild conditions. Reaction of (dppe)MePd–Co(CO)₄ (1) with aziridine gives a cationic (aziridine)palladium(II) complex with [Co(CO)₄]⁻ anion, [PdMe(aziridine)(dppe)]⁺[Co(CO)₄]⁻ (13).     

Untersuchungen zur Acidität und katalytischen Spaltaktivität dekationisierter NaY-Zeolithe

Investigation on Acidity and Catalytic Activity of Deep-Bed Calcinated Zeolites NH₄ NaY NMR and infrared techniques are applied to decationated zeolites NaY to study Brönsted acidity. The results are compared with measurements of catalytic activity and crystallinity of this zeolites. The number of OH groups which are able to form a pyridinium ion (PyH⁺) increases with increasing exchange degree and with increasing temperature of the sample. The rate of pyridinium ion formation as an equivalent of Brönsted acidity and the catalytic activity increase similarly with increasing exchange degree up to such values where a loss of crystallinity occurs.     

New bimetallic organopalladium(II) compounds containing a PdCo or PdMo bond trans to a PdC bond

The reaction of a chelated palladium compound with Co(CO)^?₄ and [Mo(CO)₃-η-C₅H₅]^? gives new stable bimetallic PdCo and PdMo complexes in which the metal-metal bond is trans with respect to the Pd-carbon σ-bond.     

Combustion of methane over supported palladium-copper bimetallic catalysts

Monometallic and bimetallic catalysts based on palladium and copper deposited on a spinel carrier have been investigated in the catalytic combustion of methane. Great differences were found in catalytic activity, according to the sequence Pd/MgAl₂O₄>CuO–Pd/MgAl₂O₄>Pd–CuO/MgAl₂O₄>CuO/MgAl₂O₄. They were explained by changes in surface composition of the catalysts. In the case of bimetallic catalysts the metallic surface is preferentially enriched in copper, which acts as a diluting agent for the Pd atom ensembles. As a consequence, the adsorption of reactants is limited and the catalysts so obtained behave like copper slightly doped with palladium.     

Electrochemical behavior of CO2 reduction on palladium nanoparticles: Dependence of adsorbed CO on electrode potential

The electrochemical reduction of CO₂ is strongly influenced by both the applied potential and the surface adsorption status of the catalyst. In this work a gas diffusion electrode (GDE) coated with Pd nanoparticles/carbon black (Pd/XC72) was used to study the electrochemical reduction of CO₂. Cyclic voltammetric (CV) analysis of Pd/XC72 between 1.5 V and − 0.6 V (vs. RHE) shows the formation of intermediates and the blocking of hydrogen absorption on the Pd nanoparticles (NPs) under a CO₂ atmosphere. The relationships between the Faradaic efficiency/current density and the applied potential reveal that the onset potential of CO formation is around − 0.4 V. Moreover, the presence of adsorbed CO was confirmed through CV analysis of Pd/XC72 under CO₂ and CO/He atmospheres. This demonstrates that H atoms and CO intermediates co-adsorb on the surface of the Pd NPs at an applied potential of around − 0.4 V. When the applied potential is more negative than − 0.6 V, adsorption of CO intermediates on the surface of the Pd NPs becomes dominant.     

A simple cathodic process for carboxylating noble metals and generating new versatile electrode interfaces

The electrochemical reactivity of polarized metals such as platinum, palladium, and rhodium toward carbon dioxide in aprotic dimethylformamide (DMF) solutions of tetramethylammonium tetrafluoroborate (TMABF₄) is presented. The capacity of metals such as Pd and Pt to cathodically insert the electrolytes under superdry conditions (via the generation of organometallic intermediates analogous to Zintl metals) is combined with the concomitant carboxylation of those metals within a potential range from − 1 V to − 2.5 V vs. Ag/AgCl/KCl(sat). Under these conditions, dense surface carboxylation of these precious metals occurs, totally suppressing their catalytic activity. Thick layers of the carboxylated metals (platinum-CO₂^– and palladium-CO₂⁻) are chemically stable and may then be further functionalized for specific applications.     

NaY超笼内[Pt_3(CO)_3(μ_2-CO)_2]_n~(2-)(n=3,4)簇合物的合成、表征及其催化CO+NO的反应性能

在NaY分子筛超笼内合成了桔黄色的[Pt_9(CO)_(18)]~(2-)和深绿色的[Pt_(12)(CO)_(24)]~(2-)簇合物。前者给出2056和1798cm~(-1)的线式和桥式羰基特征红外谱带;后者给出2080和1824cm~(-1)谱带。与在THF溶液中结果相比,NaY内合成的羰基簇合物的线式v_(CO)向高波数位移,而桥式v_(CO)向低波数位移。EXAFS为Pt羰基簇合物在分子筛内的规整形成提供了证据。NaY内Pt_9和Pt_(12)羰基簇合物在NO+CO反应中显示了较高的催化活性及稳定性。     

Isolable C@Fe3O4 nanospheres supported cubical Pd nanoparticles as reusable catalysts for Stille and Mizoroki-Heck coupling reactions

Cubical Pd nanoparticles incorporated magnetic nanospheres (Pd cNPs/C@Fe₃O₄) are found to be efficient catalysts for Stille and Mizoroki-Heck coupling reactions. A variety of aryl halides, including chlorides, are converted to biaryls and diphenylethenes with excellent yield and high TON. This immobilization of Pd cNPs on the surface C@Fe₃O₄ results in structurally stable catalytic sites. The observed enhanced catalytic activity is attributed to the high density of low-coordinated Pd {1 0 0} atoms present at the surface of the Pd cNPs/C@Fe₃O₄ catalyst. The advantages of the proposed catalytic system are its heterogeneity, high stability, absence of any toxic ligands, gram scale applicability, magnetic separability and consequent reusability.     

Preparation of palladium membranes from the reaction of Pd(C3H3)(C5H5) with H2: wet-impregnated deposition

A new technique to prepare a palladium membrane for high-temperature hydrogen permeation was developed: Pd(C₃H₃)(C₅H₅) an organometallic precursor reacted with hydrogen at room temperature to decompose into Pd crystallites. This reaction together with sintering treatment under hydrogen and nitrogen in sequence resulted in the formation of dense films of pure palladium on the surface of the mesoporous stainless steel (SUS) support. Under H₂ atmosphere the palladium membrane could be sintered at 823 K to form a skin layer inside the support pores. The hydrogen permeance was 5.16×10⁻² cm³ cm⁻² cm Hg⁻¹ s⁻¹ at 723 K. H₂/N₂ selectivity was 1600 at 723 K.     

Synthesis of coin-like hollow carbon and performance as Pd catalyst support for methanol electrooxidation

The coin-like hollow carbon (CHC) has been synthesized by only using ethanol as the carbon source with a novel Mg/NiCl₂ catalytic system via a facile solvothermal method for the first time. The CHC synthesized at optimized conditions shows an average thickness of less than 154 nm and the coin diameter of 1–3 μm. The CHC is characterized by SEM, TEM, XRD and electrochemical techniques. Pd on CHC (denotes as Pd/CHC) electrocatalysts are prepared for methanol oxidation in alkaline media. The Pd/CHC electrocatalyst gives a mass activity of 2930 A g⁻¹ Pd for methanol oxidation against 870 A g⁻¹ Pd on Pd/C electrocatalyst. One main reason for the higher mass activity of the Pd/CHC is the higher electrochemical active surface area (EASA) of the Pd/CHC.     

Group 6 metal carbonyl complexes of 3′H-spiro[indole-3,2′-[1,3]benzothiazole-2(1H)]-one

The spiro-compound 3′H-spiro[indole-3,2′-[1,3]benzothiazole-2(1H)-one (IBTH₂) was synthesized and its structure was determined using spectroscopic techniques (FTIR, ¹H NMR and mass) and X-ray crystallography. This ligand possesses different centers for coordination. Reactions of [M(CO)₆], M = Cr, Mo or W with IBTH₂ in THF under reduced pressure were studied. For chromium a complex with molecular formula [Cr(ITP)₂] was isolated; where ITP is the opened form of the ligand which occurred through C_spiro–S bond, while [Mo(CO)₅(IBTH₂)] and [W(CO)₅(IBTH₂)] were isolated from the reaction of IBTH₂ with molybdenum and tungsten carbonyls, respectively. All complexes were characterized by elemental analysis, IR, mass and ¹H NMR spectroscopy. The biological activity of the ligand and its complexes were studied and compared with the parent compound isatin.     

Pd/Hβ-zeolite catalysts for catalytic combustion of toluene: Effect of SiO2/Al2O3 ratio

The effect of pure and high silica Hβ zeolites on the catalytic performance of toluene combustion over Pd/H/3 catalyst was evaluated.Pure and high silica β zeolites were prepared by direct synthesis procedures,then 0.1 wt% of palladium was impregnated on different Hβ zeolites via incipient wetness technique using palladium nitrate as the Pd source.The Pd/Hβ catalysts were characterized by XRD,N2 adsorption/desorption,H2O adsorption,NH3-TPD,H2-TPR and XPS techniques.With increasing the SIO2/Al2O3 ratio of β zeolite,the activity of the Pd/Hβ catalysts for toluene combustion increased clearly and the pure silica β zeolite supported Pd catalyst showed the best catalytic activity.The superior catalytic performance of Pd/β catalyst prepared from pure silica β zeolite was attributed to its high hydrophobicity and the preserving ability for PdO active species.