羧化聚苯醚／聚（苯乙烯—乙烯吡啶）共混相容性

用ＤＳＣ、ＤＭＡ研究了羧化聚苯醚（ＣＰＰＯ）／聚（苯乙烯－乙烯吡啶）（ＰＳＶＰ）共混体系的相容性，结果表明，与ＣＰＰＯ／ＰＳ体系相比，乙烯吡啶基的引入大大提高了共混相容性．这主要是由于ＣＰＰＯ中的羧基与ＰＳＶＰ中的吡啶基之间通过质子转移形成的正负离子间的相互作用，推动了两组分分子的均匀混合．     

离聚物Surlyn对PBT/PP共混体系的力学性能及形态结构的影响

用力学性能测试、ＤＭＡ、ＳＥＭ等方法研究了离聚物Ｓｕｒｌｙｎ对ＰＢＴ／ＰＰ共混体系的力学性能及形态结构的影响。结果表明，在ＰＢＴ／ＰＰ共混体系中引入少量Ｓｕｒｌｙｎ可以改善界面的粘接性，从而改善其力学性能。当共混体系中ＰＢＴ／ＰＰ的组份比不变（９０／１０）且Ｓｕｒｌｙｎ的含量为６ｐｈｒ左右时，共混物的冲击强度出现极大值；而弯曲强度在Ｓｕｒｌｙｎ含量为１－２ｐｈｒ左右时有最大值。当共混体系中Ｓｕｒｌｙｎ的含量不变（６ｐｈｒ）时，其力学性能随ＰＰ含量的增加而下降。用玻璃纤维增强共混体系，可显著提高力学性能。     

（PSF—PDMS—PHS）n／PSF共混物的相容性及表面组成

利用ＤＳＣ、ＤＭＡ、ＴＥＭ和ＸＰＳ对［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ／ＰＳＦ共混物的相容性及表面组成进行了研究．结果表明，ＰＤＭＳ在共混物表面的富集与ＰＳＦ均聚物和［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ中硬段的相容性有关；ＰＤＭＳ在相容的共混物体系表面的富集与对应的多嵌段共聚物组成基本相近；不相容共混物体系表面ＰＤＭＳ的富集程度相对较高，当共混物本体中有机硅含量从１％增至５％，表面层ＰＤＭＳ的含量迅速增加，可达到嵌段共聚物中ＰＤＭＳ的含量．     

苯乙烯－甲基丙烯酸共聚物和聚环氧丙烷共混体系的相容性研究

本文用傅里叶交换红外光谱法（ＦＴＩＲ）表征了苯乙烯－甲基丙烯酸共聚物Ｐ（Ｓ－ＭＡＡ）和聚环氧丙烷（ＰＰｒＯ）共混体系的相容性．用谱带分离的技术比较准确地测定了共混体系中几种羰基的吸光系数比，并且用简明的方法定量计算了它们之间平衡的平衡常数．同时实验还表明共混组分中聚醚的分子量、分子结构、Ｐ（Ｓ－ＭＡＡ）中ＭＡＡ的含量以及共混组分的比例和体系的相容性有密切的关系．     

苯乙烯－甲基丙烯酸共聚物和聚环氧丙烷共混体系的相容性研究

 本文用傅里叶交换红外光谱法（ＦＴＩＲ）表征了苯乙烯－甲基丙烯酸共聚物Ｐ（Ｓ－ＭＡＡ）和聚环氧丙烷（ＰＰｒＯ）共混体系的相容性．用谱带分离的技术比较准确地测定了共混体系中几种羰基的吸光系数比，并且用简明的方法定量计算了它们之间平衡的平衡常数．同时实验还表明共混组分中聚醚的分子量、分子结构、Ｐ（Ｓ－ＭＡＡ）中ＭＡＡ的含量以及共混组分的比例和体系的相容性有密切的关系．     

EVA增容PP/HDPE共混体系的形态结构与性能

采用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）作为聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）共混体系的增容剂,通过冲击实验、拉伸实验、示差量热扫描仪（ＤＳＣ）和扫描电镜（ＳＥＭ）,系统地研究了共混体系的性能与其形态结构之间的。结果表明,ＥＶＡ是ＰＰ／ＨＤＰＥ共混物较好物增容剂,ＥＶＡ可以使ＰＰ、ＨＤＰＥ的晶相结构受到一定程度的破坏,增加ＰＰ和ＨＤＰＥ的相容性,同时共混物的冲击韧性明显提高。     

尼龙1010分别与未接枝和接枝马来酸酐的高抗冲聚苯乙烯的共混体系研究

研究了尼龙１０１０（ Ｐ Ａ１０１０） 与高抗冲聚苯乙烯（ Ｈ Ｉ Ｐ Ｓ） 及马来酸酐官能化的 Ｈ Ｉ Ｐ Ｓ（ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ） 间的相互作用,利用 Ｄ Ｓ Ｃ, Ｄ Ｍ Ａ, Ｓ Ｅ Ｍ 及拉伸测试等方法研究了不同组成比的共混物 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ 与 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 的结晶、玻璃化转变、形态及力学性能．结果表明 Ｈ Ｉ Ｐ Ｓ 与 Ｐ Ａ１０１０ 虽然结构相差甚远,但两者之间仍存在着一定的相互作用;而 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 可使 Ｐ Ａ１０１０ 的低温熔融峰变小,当 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 的含量≤５０ ％ 时,随着其含量的增加,共混物中 Ｐ Ａ１０１０ 的结晶温度升高;当含量＞ ５０ ％ 时, Ｐ Ａ１０１０ 发生分级结晶行为,其结晶温度由原来的１７８ ℃降至８３ ℃,同时 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 与 Ｐ Ａ１０１０ 间的相互作用变大, Ｄ Ｍ Ａ 谱上有明显的新的松驰峰． Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 共混体系的拉伸性能要优于相同组成的 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ 体系．以上现象主要是由于 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 与 Ｐ Ａ１０１０ 中的端胺基发生了化学反应,产生了接枝共聚物 Ｐ Ａ１０１０ ｇ Ｈ Ｉ Ｐ     

尼龙6/多单体接枝聚丙烯共混物的形态结构及力学性能的研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯（ Ｇ Ｍ Ａ） 和苯乙烯（ Ｓｔ） 共同接枝于聚丙烯（ Ｐ Ｐ） 上,制得多单体接枝聚丙烯 Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） ．该接枝物具有高的 Ｇ Ｍ Ａ 接枝率．本研究利用 Ｆ Ｔ Ｉ Ｒ、 Ｓ Ｅ Ｍ、 Ｔ Ｅ Ｍ、 Ｄ Ｓ Ｃ 和力学性能测试等分析方法,研究了多组分熔融接枝聚丙烯（ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）） 对尼龙６／ Ｐ Ｐ 共混物的形态结构, Ｔｇ 和力学性能的影响．结果表明, Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） 中的环氧基团与尼龙６（ Ｐ Ａ６） 末端的胺基发生化学反应,原位形成的 Ｐ Ｐ Ｐ Ａ６ 共聚物能有效的改善 Ｐ Ａ６ 与 Ｐ Ｐ 的相容性,可以使 Ｐ Ｐ 均匀的分散在 Ｐ Ａ６ 基体中,相区尺寸明显减小,提高了拉伸强度．由于两相的相容性较好,从而共混物的 Ｔｇ 有明显的变化．此外,通过透射电镜观察,发现 Ｐ Ａ６／ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）（７０／３０） 合金中存在着特殊的微相分离结构．     

AB／C型嵌段共聚物／均聚物的共混体系的相容性和形态研究（Ⅲ）──共混物的焓弛豫

嵌段共聚物ＰＩ－ｂ－ＰＭＭＡ和不同羟基含量的改性聚苯乙烯ＰＳ（ＯＨ）组成的共混物因ＰＭ－ＭＡ嵌段和ＰＳ（ＯＨ）间的玻璃化转变相当接近而不能用通常的ＤＳＣ法判别其相容性。通过共混物的焓弛豫，得到相容性明确的ＤＳＣ判据，且与电镜观察结果一致。共混物中的Ｔｇ增宽效应可通过江明等提出的链密度梯度模型解释。     

引入离子基团改善聚苯乙烯和热致液晶聚合物的相容性 Ⅰ热性能和形态

ＤＳＣ和ＳＥＭ研究结果表明聚苯乙烯（ＰＳ）与一种热致液晶聚合物（ＬＣＰ）（ＰＨＢ／ＰＥＴ（６０／４０）共聚酯）完全不相容．共混体系具有与组分无关的Ｔｇ，并且表现出明显的两相结构．将ＰＳ进行化学改性（引入磺酸基团）制备成磺化聚苯乙烯（ＳＰＳ），随中和盐离子的变化有：酸式、Ｌｉ、Ｎａ、Ｚｎ和Ｍｎ盐五种形式．用ＤＳＣ和ＳＥＭ对ＬＣＰ与ＳＰＳ共混物的热性能和形态进行了分析和表征．共混体系有一个与组成相关，且明显低于纯ＳＰＳ的Ｔｇ．这表明了ＰＳ与ＬＣＰ的相容性因为磺酸基团的引入而得到了改善．同时用Ｆｏｘ方程计算了ＬＣＰ的Ｔｇ．当ＳＰＳ含量较低时（不大于５０％）在各个共混体系中，所估算的ＬＣＰ的Ｔｇ相互吻合．表明共混体系满足Ｆｏｘ方程的前提条件，即ＬＣＰ与ＳＰＳ形成相容体系．当ＳＰＳ含量较低时（２５％），ＬＣＰ／ＳＰＳ的共混物为较均一体系，断面光滑；而ＳＰＳ含量较高时，在脆断面可以观察到纳米级的颗粒．电子能谱分析证明了这些颗粒是ＳＰＳ负离子的聚集体．     

Effect of P(MMA-co-MAA) compatibilizer on the miscibility of nylon 6/PVDF blends

With the ultimate objective of enhancing the impact strength and weatherability of nylon 6 engineering plastic, blending with poly(vinylidene fluoride) (PVDF) was studied. In the absence of a compatibilizer the two polymers phase separate, resulting in a deterioration of the properties. Since poly(methyl methacrylate) is known to be miscible with PVDF, we evaluated poly(methyl methacrylate-co-methacrylic acid) (P(MMA-co-MAA)) of low methacrylic acid content as the compatibilizer. The carboxylic acid groups in the MAA units were expected to react with the end amino groups of nylon 6 forming block or graft copolymers, P(MMA-co-MAA)-g-nylon 6, in situ, which will function as the actual compatibilizer. The amount of P(MMA-co-MAA) added, the MMA/MAA composition and heat treatment time were varied to study their effects on the miscibility, morphology, and mechanical properties of nylon 6/PVDF blends. The enhancement of the compatibility of nylon 6 and PVDF by addition of P(MMA-co-MAA) and the partial miscibility of nylon 6 and PVDF has been confirmed through DSC, dynamic mechanical testing, SEM of fracture surfaces, and tensile testing. The decrease in the crystallization temperatures on addition of compatibilizer in DSC experiments suggests that the compatibilizer enhances the interaction between the two components and retards the crystallization. The dynamic mechanical thermal analysis experiments suggest that the compatibility in the amorphous regions of nylon 6 and PVDF in particular has been enhanced. The increase in the heat treatment time in the molten state resulted in further enhancement of the miscibility. The enhancement of compatibility by addition of a reactive compatibilizer and heat treatment resulted in a significant increase in the energy of rupture in tensile testing.     

单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

聚(3-羟基丁酸酯)/聚氧化乙烯共混物非晶区相容性的固体核磁共振研究

用固体高分辨核磁共振碳谱方法研究了不同组成比的聚 (3 羟基丁酸酯 ) 聚氧化乙烯共混物的结晶度、非晶区的相容性和分子运动能力 .结果表明聚 (3 羟基丁酸酯 )的结晶度几乎不随组成比变化 ,而聚氧化乙烯的结晶度则随其在共混物中含量的降低而显著降低 .聚氧化乙烯的加入使得聚 (3 羟基丁酸酯 )非晶区的分子运动能力有所增强 .共混物的非晶区表现出一定的相容性 ,相容程度与共混物的组成比有关     

PPEKK/PEI共混物的相容性及拉伸性能

作为相容体系 ,聚芳醚酮与聚醚酰亚胺 (ＰＥＩ)共混物体系的研究受到了研究者的重视[1～ 4] .由于现在已商品化的聚芳醚酮基本上都是半结晶型聚合物 ,所以有有关无定型聚芳醚酮与聚醚酰亚胺共混物的研究鲜见报道 .含二氮杂萘酮结构聚芳醚酮酮 (ＰＰＥＫＫ)是一种新型耐高温聚合物 ,相比于已经商品化的各种聚芳醚酮 ,ＰＰＥＫＫ除具有优异的综合性能外 ,它最大的特点表现在以下两方面 ,ＰＰＥＫＫ耐热性突出 ,玻璃化转变温度 (Ｔｇ)为 2 4 5℃左右 ,远高于各种商品化的聚芳醚酮 ;ＰＰＥＫＫ为无定型聚合物 ,易溶于多种有机极性溶剂 ,大大的扩…     

Epoxy resin/poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) blends cured with 1,3,5-trihydroxybenzene: miscibility and intermolecular interactions

Epoxy resin (ER)/poly(ethylene oxide) (PEO) and/or poly(e-caprolactone) (PCL) blends cured with 1,3,5-trihydroxybenzene (THB) were prepared via the in situ curing reaction of epoxy monomers in the presence of PEO and/or PCL, which started from the initially homogeneous mixtures of DGEBA, THB and PEO and/or PCL. The miscibility and the intermolecular specific interactions in the thermosetting polymer blends were investigated by means of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The two systems displayed single and composition-dependant glass transition temperatures (T _gs), indicating the full miscibility of the thermosetting blends. The experimental T _gs of the blends can be well accounted for by Gordon-Taylor and Kwei equations, respectively. The T _g-composition behaviors were compared with those of poly(hydroxyether of bisphnol A) (Phenoxy) blends with PEO and PCL. It is noted that the formation of crosslinked structure has quite different effects on miscibility and intermolecular hydrogen bonding interactions for the thermosetting polymer blends. In ER/PEO blends, the strength of the intermolecular hydrogen bonding interactions is weaker than that of the self-association in the control epoxy resin, which is in marked contrast to the case of Phenoxy/PEO blends. This suggests that the crosslinking reduces the intermolecular hydrogen bonding interactions, whereas the intermolecular hydrogen bonding interactions were not significantly reduced by the formation of the crosslinking structure in ER/PCL blends.     

SiO2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

We prepared various copolymers containing styrene and methacrylates to examine their miscibility with polycarbonates such as bisphenol A polycarbonate (PC), dimethylpolycarbonate (DMPC), and tetramethylpolycarbonate (TMPC). Among the various copolymers examined, poly(methyl methacrylate‐co‐cyclohexylmethacrylate) [P(MMA–CHMA)] copolymers containing proper amounts of cyclohexylmethacrylate (CHMA) formed miscible blends with PC and DMPC, whereas TMPC did not form a miscible blend with P(MMA–CHMA). However, TMPC was miscible with poly(styrene‐co‐cyclohexylmethacrylate) [P(S–CHMA)] copolymers containing less than about 40 wt % CHMA, whereas PC and DMPC were always immiscible with P(S–CHMA). Miscible blends exhibited lower critical solution temperature (LCST)‐type phase behavior. Binary interaction energies were calculated from the observed phase boundaries with lattice–fluid theory combined with a binary interaction model. The quantitative interaction energy of each binary pair indicated that the phenyl ring substitution of polycarbonate with methyl groups did not lead to interactions that were favorable for miscibility with methyl methacrylate (MMA) and CHMA, but it did lead to favorable interactions with styrene. The addition of CHMA to MMA initially increased the LCST but ultimately led to immiscibility with PC and DMPC; however, addition of CHMA to styrene always decreased the LCST with TMPC. The increased LCST of PC or DMPC blends stemmed from intramolecular repulsion between MMA and CHMA, whereas the decreased LCST of TMPC/P(S–CHMA) blends with CHMA content came from negative interaction energy between styrene and CHMA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1948–1955, 2001     

PET/PEN共混物的相容性与酯交换反应

通过用1H-NMR对聚对苯二甲酸乙二酯(PET)与聚2,6-萘甲酸乙二酯(PEN)、PET/PEN共聚物的共混物酯交换反应的研究,测得了反应速率常数、反应活化能和诱导期.根据酯交换反应程度和不同反应温度下的诱导期探讨了酯交换反应与相容性的关系,认为PET与PEN的相容导致或增强了酯交换反应,即相容性是酯交换的必要条件;同时酯交换的发生又促进了PET与PEN的相容.酯交换和相容是聚酯共混物熔融时相互关联的两个过程.     

取代基对PPC/聚苯醚羧酸酯共混体系相容性的影响

由二氧化碳活化并与环氧丙烷共聚而成的脂肪族聚碳酸酯(PPC)是一类有发展前途的新型高分子弹性体。研究它与其它高聚物的混容性及混容机制对于开拓这一新材料的应用领域具有十分重要的意义。本文合成了一系列不同取代度和不同链长酯基的聚苯醚羧酸酯[E(x)-C^yPPO]^[3],探索了PPC与各聚苯醚狡酸醋的混容性,讨论了聚苯醚梭酸酷的取代度及侧基链长对PPC/E(x)-C^yPPO共混体系混容性的影响。