新型间位聚醚酮醚酮酮的合成与结晶

聚醚醚酮(ＰＥＥＫ)自八十年代初由英国ＩＣＩ公司开发并工业化以来,由于其优异的性能已在机械、航天等领域得到广泛应用.但ＰＥＥＫ的Ｔｇ只有143℃,影响了使用范围.因此其它聚芳醚酮类聚合物相继被开发出来.但这些聚芳醚酮的主链结构大都为全对位连接,使其熔点较高以至加工难度增大.因此,高Ｔｇ和低Ｔｍ的聚芳醚酮的合成是一项很有意义的工作.如果在聚合物的主链结构中引入间位结构,则可在对Ｔｇ影响较小的情况下降低熔点来改善加工条件[1,2].新型间位聚醚酮醚酮酮(ＰＥＫＥＫＫ(Ｔ/Ｉ))也是其中一种.本文主要研究ＰＥＫＥＫＫ(Ｔ/Ｉ)的合…     

聚醚砜与含萘环的聚芳醚酮增容共混物的研究

以双酚S型含萘环的聚芳醚酮为增容剂,研究了对聚醚砜(PES)与对苯二酚型-1,4-萘环的聚芳醚酮(1,4-NA-PAEK)共混体系的相容性及力学性能.结果表明,双酚S型含萘环的聚芳醚酮可显著降低PES/NA-PAEK共混体系中NA-PAEK分散相尺寸,改善两组分间的相容性,并且增容剂的加入使共混体系形成了双连续的互锁结构,提高了共混物的力学性能.     

聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.     

联苯聚醚醚酮酮的结晶动力学的研究

通过ｄｓｃ 方法对新型聚芳醚酮联苯聚醚醚酮酮（ＰＥＥＫＤＫ） 的等温及非等温熔融结晶动力学进行了研究,运用Ａｖｒａｍｉ 方程分析了其等温结晶行为,求得了等温结晶活化能,平衡熔点,成核参数,并与其它聚芳醚酮类聚合物进行了比较。同时,对ＰＥＥＫＤＫ的非等温结晶动力学也进行了研究。     

几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

氢键型聚芳醚酮共聚物的合成与表征

氢键型聚芳醚酮共聚物的合成与表征王忠刚，陈天禄，徐纪平（中国科学院长春应用化学研究所长春１３００２２０）关键词氢键，聚芳醚酮，合成，表征高分子链之间的氢键相互作用可以有效地提高聚合物的性能［１，２］．本工作通过共聚反应，在酚酞型聚芳醚酮ＰＥＫ－Ｃ分子...     

低温溶液缩聚合成聚芳醚酮酮的研究

低温溶液缩聚合成聚芳醚酮酮的研究宋才生，蔡明中，周丽云（江西师范大学化学系南昌３３００２７）关键词低温溶液缩聚，付一克或化反应，聚芳醚酮酮，二苯醚聚芳醚酮酮（ＰＥＫＫ）是一种新型的热塑性耐热高分子材料，具有优异的机械力学性能，耐溶剂抗化学腐蚀性能，抗...     

酞侧基聚芳醚砜和聚芳醚酮共混物的高温流变行为

用锥板粘度计测试了酞侧基聚芳醚砜（ＰＥＳ－Ｃ）和酞侧基聚芳醚酮（ＰＥＫ－Ｃ）及其共混物的熔体流变行为．试样的流动活化能分别为１４５、１３３和１１２ＫＪ／ｍｏｌ．共混物的熔体粘度显著低于ＰＥＳ－Ｃ和ＰＥＫ－Ｃ粘度的对数加和值．并证明试样的熔体流动性和加工稳定性都已达到注射成型工艺的要求．     

侧链含萘可交联聚芳醚酮的合成及性能

以4,4'-二羟基苯基正戊酸和4,4'-二氟二苯酮为原料, 二甲基亚砜(DMSO)为溶剂, 采用亲核取代反应合成侧基含羧基的聚芳醚酮均聚物, 进一步与1-萘酚和2-萘酚接枝制备新型含萘可交联聚芳醚酮. 用核磁共振(NMR)、红外光谱(FTIR)、示差扫描量热(DSC)和热重分析(TGA)表征其结构和性能, 含萘聚芳醚酮在常用有机溶剂如N,N-二甲基乙酰胺(DMAc)、DMSO, 四氢呋喃(THF)中有良好的溶解性, 并具有很好的成膜性. DSC测试结果显示, 在170℃热处理2 h的交联聚合物的玻璃化转变温度(T_g)提高40℃. TGA数据显示接枝后的聚合物的5%热失重温度提高40~50℃, 证明其发生交联反应. 结果表明, 新型含萘可交联聚芳醚酮具有热固性树脂的耐溶剂和耐高温特性, 进一步拓宽了聚芳醚酮的应用前景.     

二甲基取代杂环联苯聚芳醚的合成与性能

由自制的二甲基取代类双酚4-(3,5-二甲基-4-羟基苯基)-2,3-二氮杂萘-1-酮(DM-HPPZ)单体和4,4'-二氟二苯酮、4,4'-二氯二苯砜进行亲核缩聚反应,制备了一类新型的二甲基取代聚芳醚酮、聚芳醚砜及其共聚物聚芳醚砜酮树脂材料.在适宜的聚合条件下,获得了高分子量的聚合物,其特性粘度为0.44～0.75DL·g^-1.利用DSC和TGA研究了聚合物的耐热性能,结果表明,新型聚芳醚玻璃化温度高(568～595K),耐热稳定性好(5%热失重温度大于416℃);拉伸强度为45.4～85.0MPa,力学性能优良.新型聚芳醚在氯仿、DMAc等极性有机溶剂中可溶解并浇铸得到透明、韧性高的薄膜.共聚物结合了聚醚酮好的力学性能和聚醚砜高的耐热性的特点,因此综合性能更佳.     

含二氮杂萘酮结构聚醚酮酮的合成及表征

以１,４ 二（４ 氯代苯甲酰基）苯与４ （４ 羟基苯基） ２,３ 二氮杂萘 １ 酮单体经亲核取代反应,合成了含二氮杂萘酮结构聚醚酮酮聚合物．用ＦＴ ＩＲ、１Ｈ ＮＭＲ、ＤＳＣ、ＴＧＡ、Ｘ 射线衍射等方法对聚合物进行了表征,研究了聚合物的溶解性能．结果表明,该聚合物是一种具有高热稳定性的可溶性无规聚合物．     

聚醚酰亚胺/酚酞型聚醚醚酮共混体系相容性的稀溶液粘度法研究

<正> 近年来,有关高性能树脂聚酰亚胺共混物的研究日益引起人们的关注。已经发现许多种分子结构不同的聚酰亚胺之间,聚酰亚胺与聚苯并咪唑,或聚醚醚酮能形成完全相容的共混体系,从而扩大了高性能树脂聚酰亚胺的应用范围。 酚酞型聚醚醚酮(PEK-C)是由我所研究开发出的一种新型的聚醚醚酮类高性能树脂,它具有良好的可溶性,优异的机械强度和加工流动性,已广泛应用于结构材料及复合材料的制备。为进一步扩大该树脂的应用范围,本实验室在PEK-C共混物的研究做了大量的工作。本工作研究了聚醚酰亚胺(PEI)/PEK-C共混体系的相容性。PEI和PEK-C的分子结构如下:     

Morphology control of sulfonated poly(ether ketone ketone) poly(ether imide) blends and their use in proton-exchange membranes

Polymer blends based on sulfonated poly(ether ketone ketone) (SPEKK) as the proton-conducting component and poly(ether imide) (PEI) as the second component were considered for proton-exchange membranes (PEMs). The PEI was added to improve the mechanical stability and lower the water swelling in the fuel cell environment. Membranes were cast from solution using N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). The ternary, polymer/polymer/solvent, phase diagram was determined to provide guidance on how to control the morphology during solvent casting of blend membranes.

For blends of SPEKK (ion-exchange capacity = 2 mequiv/g) with PEI as the minority component, the morphology consisted of dispersed particles of 0.5–6 μm. Larger particles were achieved by increasing the PEI content and/or lowering the casting temperature. High-temperature annealing after solution casting did not affect the morphology of blend membranes, due to the low mobility and compatibility of the two polymers.

The possible use of SPEKK/PEI blends in PEMs is discussed in terms of existing theories of ion transport in polymers.     

含间苯基聚醚酮醚酮酮的合成和性能研究

自英国ＩＣＩ公司开发聚醚醚酮（ＰＥＥＫ）并于八十年代初期商品化以来［１］,聚芳醚酮作为一类新型结构的高性能特种工程塑料得到了惊人的发展,不同结构的聚芳醚酮相继出现．Ｊａｎｓｏｎ［２］等以对苯二甲酰氯（ＴＰＣ）和４,４′ 二苯氧基二苯酮（ＤＰＢＰ）为单...     

一种可溶性含呫吨结构的聚醚醚酮酮的合成与表征

以呫吨酮为起始原料,经二氯亚砜作用得到9,9-二氯呫吨中间体,继而与苯酚发生取代反应,探索了"一锅、二步"法制备含呫吨结构的双酚单体———9,9-二(4-羟基苯基)呫吨(BHPX)的新方法.在氮气保护下,在K2CO3存在下,以环丁砜为溶剂,将其与1,3-二(4-氟苯甲酰基)苯进行亲核缩聚反应,制得了一种高分子量的(数均分子量为45000,多分散性指数为1.9)新型含呫吨结构的Cardo型聚醚醚酮酮(PEEKK-X),并用FTIR,DSC,TG及WAXD等方法对其进行了分析表征.结果表明,所制得的聚合物(PEEKK-X)为无定形结构,其玻璃化转变温度(Tg)为215℃;在氮气气氛中5%的热失重温度(Td)为558℃,700℃时的残炭率为67%;在常温下易溶于非质子极性溶剂(如NMP、DMF和DMAc)和极性较弱的溶剂如CHCl3中.该聚合物可通过溶液浇铸成膜,所得到的薄膜韧性好,透明且耐折,其拉伸强度为81.5 MPa,杨氏膜量为2.48 GPa,断裂伸长率为16.8%.     

Blends of a novel high-temperature poly(oxy-1,4′-diphenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) with poly(ether imide): structure, interaction, and miscibility

 Polymer miscibility has been discovered in a blend system comprising poly(ether imide) (PEI) and a new poly(ether diphenyl ether ketone) (PEDEK). The miscibility of the PEDEK/PEI polymer system (quenched from the molten state) was investigated in this study using differential scanning calorimetry and Fourier transform (FT-IR) spectroscopy. A composition-dependent single glass-transition temperature (T _g) in the PEDEK/PEI blends over a full composition range was observed; the sharp transition width and the T _g–composition relationship both suggest that the scale of mixing is fine and uniform. Evidence based on observation of the cold-crystallization peak and suppression of the blend crystallinity and melting peak also indicated intimate intermolecular mixing. The FT-IR result yielded further evidence that the physical interactions leading to miscibility were weak, with no apparent specific interactions between the constituent polymers. Relationships between structures and interactions responsible for the miscibility in PEI and several ether-ketone-type polymers are briefly discussed. Received: 8 July 1999 Accepted in revised form: 21 October 1999     

STRUCTURE AND PROPERTIES OF PHOSPHROUS-CONTAINING POLY（ARYL ETHER KETONE） WITH BISPHENOL-A MOIETY

A phosphrous-containing poly(aryl ether ketone)was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide(FPPPO)by nucleophilic substitution reaction.The structure of the polymer was characterized by FT-IR,~1H-NMR and ~(31)p-NMR.The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature(T_g)of the polymer was 205℃,and the 5% weight loss temperature under nitrogen was 475℃.Good solubility of the polymer in organic solvents,such as N-methylpyrrolidone,dimethylformamide, dimethylacetamide,dimethylsulfoxide and chloroalkanes was observed,flexible film was obtained from the polymer's CH_2Cl_2 solution.The limiting oxygen index(LOI)of the PAEK was 40,which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.     

含亚环己基荷电聚醚醚酮的合成表征与性能

以 3,3′ 二磺酸钠基 4,4′ 二氟二苯酮和 4,4′ 二氟二苯酮与 4,4′ 亚环己基双酚进行亲核共缩聚 ,合成了磺化度从 0 4～ 2 0的一系列含亚环己基的荷电聚醚醚酮 .聚合物除保持了荷电聚醚醚酮良好的热稳定性和机械性能外 ,还具有良好的耐水性 .聚合物的DSC和广角X射线衍射数据表明 :上述磺化度聚合物均呈无定型聚集态结构 .比较了聚合物与双酚A系列荷电聚醚醚酮的性能差异 ,讨论了聚合物的溶解特点     

Glass transition,crystallization, and morphology relationships in miscible poly(aryl ether ketones) and poly(ether imide) blends

The relationships among glass transition, crystallization, melting, and crystal morphology of poly(aryl ether ketone) (PAEK)/poly(other imide) (PEI) blends was studied by thermal, optical and small-angle x-ray scattering (SAXS) methods. Two types of PAEK were chosen for this work: poly(aryl ether ether ketone), PEEK, and poly(aryl ether ketone ketone), PEKK, which have distinctly different crystallization rates. Both PAEKs show complete miscibility with PEI in the amorphous phase. As PAEK crystallizes, the noncrystallizable PEI component is rejected from the crystalline region, resulting in a broad amorphous population, which was indicated by the broadening and the increase of T_g over that of the purely amorphous mixture. The presence of the PEI component significantly decreases the bulk crystallization and crystal growth rate of PAEK, but the equilibrium melting temperature and crystal surface free energies are not affected. The morphology of the PEI segregation was investigated by SAXS measurements. The results indicated that the inter(lamellar-bundle) PEI trapping morphology was dominant in the PEEK/PEI blends under rapid crystallization conditions, whereas the interspherulitic morphology was dominant in the slow crystallizing PEKK/PEI blends. These morphologies were qualitatively explained by the expression δ=D/G, where G was the crystal growth rate and D was the mutual diffusion coefficient. © 1993 John Wiley & Sons, Inc.