Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

We present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (D_coop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2590–2601     

Racemic dipeptide glycyl‐dl‐leucine at 120 K

The structure of glycyl‐dl ‐leucine, C₈H₁₆N₂O₃, has been determined at 120 K by single‐crystal X‐ray diffraction. In addition to three N—H?O‐type hydrogen bonds of the positively charged RNH₃⁺ group of the zwitterionic mol­ecule, an intermolecular N—H?O contact exists between the peptide bond and the carboxyl­ate group. Four hydrogen‐bond cycles were identified, giving a complex pattern.     

Property and Application of BACy‐Based Functional Hydrogels

Conventional polyacrylamide hydrogels prepared from the free radical polymerization between acrylamide and N,N′‐methylenebisacrylamide (NMBA) have been frequently used in the biochemical technique like the sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS‐PAGE) to resolve protein mixtures. In this study, we have prepared an alternative polyacrylamide hydrogel from the cross‐linking of acrylamide and N,N′‐bisacrylylcystamine (BACy). In addition, we have compared the BACy‐based hydrogel with the NMBA‐based polyacrylamide hydrogel for their physical properties such as swelling ratio, shear modulus, crosslink density and morphology. Moreover, we further determined whether BACy‐based polyacrylamide hydrogel could be applied to SDS‐PAGE and proteomics research. The results showed that this type of hydrogel is capable of separating proteins and facilitates further in‐gel protein digestion and the following protein identifications by mass spectrometry. In summary, our study provides a basis for the putative application of BACy‐based hydrogels.     

Poly(L‐lysine)‐Induced Aggregation of Single‐Strand Oligo‐DNA‐Modified Gold Nanoparticles

Single‐strand oligo‐DNA‐modified Au nanoparticles (AuNPs) undergo aggregation in the presence of poly(L ‐lysine) (PLL), which is attributed to the interactions between the oligo‐DNA and PLL. These interactions between the oligo‐DNA and PLL were identified to be electrostatic when the lysine residues of PLL were positively charged and to be hydrogen bonding when the residues were deprotonated. The aggregation was promoted with an increase in the pH value at a pH level lower than the pK_a value of PLL (pK_a≈10.0) due to the gradual deprotonation of the lysine residues and thus suppressed electrostatic interactions between the positively charged lysine residues of PLL and the negatively charged backbone phosphate groups of the oligo‐DNA. At pH levels higher than the pK_a value of PLL, the aggregation was identified to be dominated by the hydrogen bonds between the bases of the oligo‐DNA and the deprotonated lysine residues of PLL. This study prompts the possibility that the spectral, and thus color, change of AuNPs upon aggregation can be used as a probe to follow the interactions between oligo‐DNA and polypeptides.     

Polyol‐Metall‐Komplexe.47 Kristalline D‐Mannose‐Kupfer(II)‐Komplexe aus Fehlingscher Lösung

Polyol Metal Complexes.47¹⁾ Crystalline D ‐Mannose‐Copper Complexes from Fehling Solutions Blue, unstable crystals of K₃[Cu₅(β‐D ‐Manp)₄H_—13] · α‐D ‐Manp · 16.5 H₂O ( 1 ), which contain a pentanuclear cupric complex of the reducing sugar D ‐mannose in its β‐pyranose form (β‐D ‐Manp), have been obtained from ice‐cold aqueous alkaline solutions. The homoleptic pentacuprate contains bridging mannopyranose ligands, which are charged 4— and 2.5—. Addition of ethylenediamine (en) to such Fehling solutions yields N, N′‐Bis(β‐D ‐mannopyranosyl)‐ethylenediamine (L) as a condensation product of the diamine and mannopyranose. Crystals of [(en)₂Cu₇(β‐D ‐Manp1, 2, 3, 4H_—4)₂(L2, 3, 4H_—3)₂] · 26.6 H₂O ( 2 ) could be isolated. The heptanuclear cupric complex is a structural derivative of the homoleptic mannose complex.     

An Amino‐Acid‐Based Self‐Healing Hydrogel: Modulation of the Self‐Healing Properties by Incorporating Carbon‐Based Nanomaterials

An amino‐acid‐based (11‐(4‐(pyrene‐1‐yl)butanamido)undecanoic acid) self‐repairing hydrogel is reported. The native hydrogel, as well as hybrid hydrogels, have been thoroughly characterized by using various microscopic techniques, including transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, fluorescence spectroscopy, FTIR spectroscopy, X‐ray diffraction, and by using rheological experiments. The native hydrogel exhibited interesting fluorescence properties, as well as a self‐healing property. Interestingly, the self‐healing, thixotropy, and stiffness of the native hydrogel can be successfully modulated by incorporating carbon‐based nanomaterials, including graphene, pristine single‐walled carbon nanotubes (Pr‐SWCNTs), and both graphene and Pr‐SWCNTs, within the native gel system. The self‐recovery time of the gel was shortened by the inclusion of reduced graphene oxide (RGO), Pr‐SWCNTs, or both RGO and Pr‐SWCNTs. Moreover, hybrid gels that contained RGO and/or Pr‐SWCNTs exhibited interesting semiconducting behavior.     

Two 18ē TiIVη5‐Cp‐tris(sec‐amido)‐type complexes derived from 1H‐imidazol‐2‐yl side‐chain functionalized cyclopentadienes

Achiral {2‐[2‐(η⁵‐cyclopentadienyl)‐2‐methylpropyl]‐1H‐imidazolyl‐κN¹}bis(N,N‐diethylamido‐κN)titanium(IV), [Ti(C₄H₁₀N)₂(C₁₂H₁₄N₂)], (I), and closely related racemic (SR)‐{2‐[(η⁵‐cyclopentadienyl)(phenyl)methyl]‐1H‐imidazolyl‐κN¹}bis(N,N‐diethylamido‐κN)titanium(IV), [Ti(C₄H₁₀N)₂(C₁₅H₁₂N₂)], (II), have been prepared by direct reactions of Ti(NEt₂)₄ and the corresponding 1H‐imidazol‐2‐yl side‐chain functionalized cyclopentadienes. In compound (II), there are two crystallographically independent molecules of very similar geometries connected by a noncrystallographic pseudosymmetry operation akin to a 2₁ screw axis. All Ti‐ligating N atoms in both (I) and (II) are in planar environments, which is indicative of an additional N→Ti pπ–dπ donation. This fact and the 18ē nature of both (I) and (II) are additionally supported by quantum chemical single‐point density functional theory (DFT) computations.     

Crystallographic report: [N,N′‐Bis‐(6‐methylpyrid‐2‐ylium)‐(1R,2R)‐1,2‐diaminocyclohexane] bis‐[(p‐cymene)‐ trichlororuthenate(II)]

The chiral compound (H₂cydiampy)[RuCl₃(p‐cymene)]₂ has been obtained in high yield by treating [RuCl₂(p‐cymene)]₂ with an excess of hydrochloric acid in the presence of one equivalent of N,N′‐bis‐(6‐methylpyrid‐2‐yl)‐(1R,2R)‐1,2‐diaminocyclohexane (cydiampy). It crystallizes in the chiral tetragonal space group P4₃2₁2, with half of the atoms of the dication related to the other half by a crystallographic C₂ axis that also makes equivalent the two anionic metal moieties. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and Electronic Spectroscopy of Bromocarbazoles. Direct Bromination of N‐ and C‐Substituted Carbazoles by N‐Bromosuccinimide or a N‐Bromosuccinimide/Silica Gel System

The preparation, isolation and characterization by elemental analysis and ¹H‐NMR, ¹³C‐NMR, and MS data of the bromo derivatives of N‐substituted carbazoles, i.e., of 9‐methyl‐9H‐carbazole ( 1 ), 9‐phenyl‐9H‐carbazole ( 2 ), 9‐benzyl‐9H‐carbazole ( 3 ), 2‐methoxy‐9‐methyl‐9H‐carbazole ( 4 ), and of C‐substituted carbazoles, i.e., of 2‐(acetyloxy)‐9H‐carbazole ( 5 ) and 3‐nitro‐9H‐carbazole ( 6 ), are reported, in part for the first time. As brominating reagents, N‐bromosuccinimide (NBS) or NBS/silica gel in CH₂Cl₂, NBS in AcOH, KBrO₃/KBr in EtOH doped with a catalytic amount of H₂SO₄, or KBrO₃/KBr in AcOH were employed, and their uses were compared. Semi‐empirical PM3 calculations were performed to predict the reactivity of the N‐substituted and C‐substituted carbazoles and of their bromo derivatives and found to verify the experimental results. The UV‐absorption and fluorescence and phosphorescence emission spectra of the bromocarbazole derivatives in MeCN solution at 298 K and in a solid matrix at 77 K were compared with those of the corresponding carbazoles 1 – 6 . The dynamic properties of the lowest excited singlet and triplet states (τ_f, τ_p, ?_f, and ?_p) were measured under the same experimental conditions. The intramolecular spin–orbital‐coupling effect of the Br‐atom and NO₂ group on the spectroscopic data, photophysical parameters, and on the photo reactivity were also briefly analyzed.     

Conformational polymorphism of (E,E)‐N,N′‐bis(4‐nitrobenzylidene)benzene‐1,4‐diamine

Two polymorphs of (E,E)‐N,N′‐bis(4‐nitrobenzylidene)benzene‐1,4‐diamine, C₂₀H₁₄N₄O₄, (I), have been identified. In each case, the molecule lies across a crystallographic inversion centre. The supramolecular structure of the first polymorph, (I‐1), features stacking based on π–π interactions assisted by weak hydrogen bonds involving the nitro groups. The second polymorph, (I‐2), displays a perpendicular arrangement of molecules linked via the nitro groups, combined with weak C—H...O hydrogen bonds. Both crystal structures are compared with that of the carbon analogue (E,E)‐1,4‐bis[2‐(4‐nitrophenyl)ethenyl]benzene, (II).     

N,N′‐Bis(2‐methoxy­benzyl­idene) adducts of ethane‐1,2‐di­amine,propane‐1,3‐di­amine and butane‐1,4‐di­amine

We have isolated and crystallographically characterized the three homologous compounds N,N′‐bis(2‐methoxy­benzyl­idene)­ethane‐1,2‐di­amine (MeSalen), C₁₈H₂₀N₂O₂, N,N′‐bis(2‐methoxy­benzyl­idene)­propane‐1,3‐di­amine (MeSalpr), C₁₉H₂₂N₂O₂, and N,N′‐bis(2‐methoxy­benzyl­idene)­butane‐1,4‐di­amine (MeSalbu), C₂₀H₂₄N₂O₂. In contrast with MeSalpr, the mol­ecules of MeSalen and MeSalbu, which have an even number of methyl­ene units, have crystallographic symmetry. Comparing these methoxy‐substituted species with their hydroxy equivalents shows that the aryl rings rotate upon removal of the O—H⋯N hydrogen bonds. The packing of MeSalen and MeSalpr is controlled by C—H⋯π interactions, whereas that of MeSalbu has only van der Waals contacts.     

A comparative study of intermolecular interactions in the crystal structures of phenyl/phenyl end‐capped oligoanilines

Three crystal structures have been analysed from the point of view of intermolecular interactions: N,N′‐di­phenyl‐1,4‐benzo­quinone di­imine, C₁₈H₁₄N₂, (I), its reduced form N,N′‐di­phenyl‐1,4‐phenyl­enedi­amine, C₁₈H₁₆N₂, (II), and N,N′‐di­phenyl‐1,4‐phenyl­enedi­ammonium bis(p‐toluene­sulfonate), C₁₈H₁₈N₂²⁺·2C₇H₇O₃S^?, (III), which contains fully protonated (II) with p‐toluene­sulfonic acid. The local molecular C_i symmetry is preserved in all three structures and the packing seems to be dominated by the mutual arrangement of the simple polyaniline oligomers in the different protonation states. In (I), the most significant molecular interactions are stacking forces, forming columns of mol­ecules along [001]. Close packing of the columns results in C‐centring of the structure. In (II), only van der Waals interactions can be observed. In the structure of (III), the p‐toluene­sulfonate ions serve as acceptors in relatively strong N—H?O hydrogen bonds. The N,N′‐di­phenyl‐1,4‐phenyl­enedi­ammonium cation intercalates between two anions related by a centre of symmetry.     

基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of transition‐metal‐ion‐selective poly(N‐isopropylacrylamide) hydrogels by the incorporation of an Aza crown ether

A functionalized cyclam was synthesized by the attachment of a polymerizable acryloyl group to one of the four nitrogens on the cyclam molecule. The polymerization of the functionalized cyclam was performed with N‐isopropylacrylamide and N,N′‐methylene bisacrylamide, and the gels obtained were studied in the presence of different transition‐metal‐ion solutions. There was a drastic difference in the phase‐transition temperature (T_c) of the poly(N‐isopropylacrylamide) (PNIPAAm)/cyclam gel in comparison with the pure PNIPAAm gel. For the described system, a T_c shift of 15 °C was obtained. The presence of functionalized cyclam increased the hydrophilicity and T_c of the aforementioned polymer gels in deionized water (at pH 6) because of the presence of protonated amino moieties. The PNIPAAm/cyclam gels showed a dependence of the swelling behavior on pH. T_c of the pure PNIPAAm gel was weakly influenced by the presence of any transition‐metal ions, such as Cu²⁺, Ni²⁺, Zn²⁺, and Mn²⁺. The addition of Cu²⁺ or Ni²⁺ to the PNIPAAm/cyclam gel reduced T_c of the polymer gel, and a shift of approximately 12 °C was observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1594–1602, 2003     

cis‐(6RS,13RS)‐3,3,10,10‐Tetra­methyl‐6,13‐diphenyl‐1,8‐dioxa‐4,11‐diaza­cyclo­tetra­decane‐2,5,9,12‐tetra­one and two of its precursors

The title macrocycle, C₂₆H₃₀N₂O₆, (VI), was obtained by `direct amide cyclization' from the linear precursor 3‐hydr­oxy‐N‐[1‐methyl‐1‐(N‐methyl‐N‐phenyl­carbamoyl)ethyl]‐2‐phenylpropanamide, the N‐methyl­anilide of rac‐2‐methyl‐2‐[(3‐hydroxy‐2‐phenyl­propanoyl)­amino]­propanoic acid, C₁₃H₁₇NO₄, (IV). The reaction proceeds via the inter­mediate rac‐2‐(2‐hydroxy‐1‐phenyl­ethyl)‐4,4‐dimethyl‐1,3‐oxazol‐5(4H)‐one, C₁₃H₁₅NO₃, (V), which was synthesized independently and whose structure was also established. Unlike all previously described analogues, the title macrocycle has the cis‐diphenyl configuration. The 14‐membered ring has a distorted rect­angular diamond‐based [3434] configuration and inter­molecular N—H⋯O hydrogen bonds link the mol­ecules into a three‐dimensional framework. The propanoic acid precursor forms a complex series of inter­molecular hydrogen bonds, each of which involves pairwise association of mol­ecules and which together result in the formation of extended two‐dimensional sheets. The oxazole inter­mediate forms centrosymmetric hydrogen‐bonded dimers in the solid state.     

Mild Oxidation of 1,3,5‐Trisubstituted Pyrazolines with N‐Bromo‐sulphonamides

1,3,5‐Trisubstituted pyrazolines to pyrazoles are carried out efficiently in the presence of new reagents N,N,N′, N′‐tetrabromo‐benzene‐1,3‐disulfonylamine [TBBDA] and N,N′‐dibromo‐N,N′‐1,2‐ethanediylbis‐(p‐toluenesulphonamide) [BNBTS] in solvent‐free conditions with catalytic amounts of SiO₂ under microwave irradiation in high yields.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.