Functional Porous Carbon/Nickel Oxide Nanocomposites as Binder‐Free Electrodes for Supercapacitors

High‐surface‐area, guava‐leaf‐derived, heteroatom‐containing activated carbon (GHAC) materials were synthesized by means of a facile chemical activation method with KOH as activating agent and exploited as catalyst supports to disperse nickel oxide (NiO) nanocrystals (average size (2.0±0.1) nm) through a hydrothermal process. The textural and structural properties of these GHAC/NiO nanocomposites were characterized by various physicochemical techniques, namely, field‐emission SEM, high‐resolution TEM, elemental analysis, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and Raman spectroscopy. The as‐synthesized GHAC/NiO nanocomposites were employed as binder‐free electrodes, which exhibited high specific capacitance (up to 461 F g^?1 at a current density of 2.3 A g^?1) and remarkable cycling stability, which may be attributed to the unique properties of GHAC and excellent electrochemical activity of the highly dispersed NiO nanocrystals.     

Nano NiO/AlMCM‐41, a green synergistic,highly efficient and recyclable catalyst for the reduction of nitrophenols

Highly ordered mesoporous molecular sieves AlMCM‐41 and a new NiO/AlMCM‐41 nanocomposite were synthesized using a sol–gel method. Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and N₂ adsorption desorption analyses were used to examine the structure, morphology, size and phase composition of the synthesized NiO/AlMCM‐41 nanocomposites. AlMCM‐41 embedded with NiO nanoparticles was subsequently prepared using different nickel loadings in a direct synthetic route. The results show the successful deposition of NiO nanoparticles onto the framework of AlMCM‐41. AlMCM‐41 provides enormous benefits such as environmentally safe, economic viability and porosity when used as support for NiO nanoparticles. The excellent catalytic activities of AlMCM‐41 and NiO/AlMCM‐41 were investigated for the reduction of nitrophenols (4‐NP, 2‐NP) to aminophenols (4‐AP, 2‐AP) in water at ambient temperature. The best observed performance of reduction of NP with 100% conversion into analogous amino derivatives occurred within 6 min with an estimated rate constant of 0.46 min^?1. The efficiency of reduction was observed to increase as a function of NiO enrichment. The NiO/AlMCM‐41 nanocomposite could be recycled and reused up to five times without noticeable change in its structure and activity. These properties make NiO/AlMCM‐41 nanocomposite an ideal platform to study various heterogeneous catalytic processes which can have application in purification, catalysis, sensing devices, and green chemistry.     

Free Volume of Montmorillonite/Styrene‐Butadiene Rubber Nanocomposites Estimated by Positron Annihilation Lifetime Spectroscopy

Summary: The size and concentration of free‐volume holes of two kinds of montmorillonite (MMT)/styrene‐butadiene rubber (SBR) nanocomposites were investigated by positron annihilation lifetime spectroscopy (PALS). Strong interfacial interaction caused an apparent reduction of the free‐volume fraction of rubber probably by depressing the formation of free‐volume holes in the interfacial region. Interfacial interaction in MMT/SBR nanocomposites was weaker than that in SBR filled with carbon black.

Dependence of normalized o‐Ps intensity of four kinds of composites on filler volume fraction.     

Characterization,optical, and nanoscale free volume properties of Na‐CMC/PAM/CNT nanocomposites

Polyblend and nanocomposite films of sodium salt of carboxymethylcellulose (Na‐CMC)/polyacrylamide (PAM) and Na‐CMC/PAM modified with carbon nanotubes (CNT) were synthesized by the solution casting technique. The effect of PAM and CNT loading on the structural, optical, and nanoscale free volume properties of Na‐CMC was studied. X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy exhibited the existence of strong interactions between Na‐CMC and PAM and the non‐destructive effect of CNT on Na‐CMC/PAM structure. The HR‐TEM revealed the multi‐walled structure of CNT with a 7.06‐nm wall thickness and a 6.92‐nm wall inner diameter. Positron annihilation lifetime spectroscopy (PALS) was done, in a vacuum and at 30°C to 200°C, to investigate the nanoscale free volume properties by using a conventional fast‐fast coincidence spectrometer. It was found that the o‐Ps lifetime (τ₃ ) and free volume (V_h) increase with increasing CNT percentage in the Na‐CMC/PAM blend. The distribution of the o‐Ps lifetime was broadened with increasing CNT ratios. Furthermore, the glass transition temperature (T_g) increases with increasing loads of CNT. For the first time, a correlation was done between Urbach energy (E_U) and V_h. Finally, the results were represented and discussed in the frame of free volume properties. Optical measurements showed that the transmittance T% of Na‐CMC/PAM was 91.12% and decreased to 68.42% and 36.45% after loading with 1.0 and 2.0 wt % CNT. In addition, the blend shows higher insulating properties compared with the individual polymers. The CNT incorporation reduces the band gap significantly and increases the E_U in the films.     

Free‐volume and crystallinity in low molecular weight poly(ethylene oxide)

Positron annihilation lifetime spectroscopy (PALS), differential scanning calorimetry, X‐ray diffraction, and polarized light optical microscopy were used to study six low molar mass poly(ethylene oxide) samples with average molar masses ranging from 1 × 10³ to 10 × 10³ g mol^?1. Dynamic light scattering was used to determine molar mass and polydispersity rigorously. Polymer samples with 70–95% crystallinity, which is an unusual range in PALS studies, were prepared by molten material quenching. The ortho‐positronium pick‐off lifetime (τ₃) and relative fractional free volume (f_v), determined by the free volume model, correlated well with the average molar mass and crystallinity of the polymers. X‐ray diffraction and polarized light optical data support the interpretation of positron annihilation results. PALS parameter, I₃, which is associated with high cavity content, remained approximately constant at 20–22% for all samples. The cavities are present as crystallite defects in the spherulitic open texture and the amorphous phase for the low crystallinity sample (e.g., for M_w = 1390) and at the interfaces and in interlamellar spherulite regions of the more crystalline materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2400–2409, 2007     

In Situ Semibatch Emulsion Polymerization of 2‐Ethyl Hexyl Acrylate/n‐Butyl Acrylate/Methyl Methacrylate/Cellulose Nanocrystal Nanocomposites for Adhesive Applications

Cellulose nanocrystals (CNCs) are safe, “green,” hydrophilic nanoparticles. CNCs are added in situ during a semibatch 2‐ethyl hexyl acrylate (EHA)/n‐butyl acrylate (BA)/methyl methacrylate (MMA) emulsion polymerization. As EHA is a more hydrophobic monomer, manipulation of the monomer feed composition allows for the evaluation of the effect of hydrophobicity on CNC distribution in the nanocomposite and ultimately on adhesive properties. The adhesive properties (loop tack, peel strength, and shear strength) of three different EHA/BA/MMA latex formulations are shown to simultaneously improve with increasing CNC loading. However, the hydrophobicity of the EHA leads to a nonuniform distribution of CNCs in the latex films. Comparison of the in situ polymerized nanocomposites to their blended counterparts is also made.     

Surface modified SPIONs‐Cr(VI) ions‐immobilized organic‐inorganic hybrid as a magnetically recyclable nanocatalyst for rapid synthesis of polyhydroquinolines under solvent‐free conditions at room temperature

In this work, a magnetic hybrid dichromate nanocomposite with triphenylphosphine surface modified superparamagnetic iron oxide nanoparticles (SPIONs) as a recyclable nanocatalyst was designed, prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR) spectra, X‐ray diffraction (XRD) pattern analysis, vibrating sample magnetometer (VSM) curves, X‐ray fluorescence (XRF) analysis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images and dynamic light scattering (DLS) analysis. Then, it was used in a green and efficient procedure for one‐pot multicomponent synthesis of polyhydroquinoline derivatives by the condensation of aldehydes, dimedone or 1,3‐cyclohexadione, ethyl acetoacetate and ammonium acetate. This protocol includes some new and exceptional advantages such as short reaction times, low catalyst loading, high yields, solvent‐free and room temperature conditions, easy separation and reusability of the catalyst.     

Free volume and mass transport in polymer nanocomposites

This review relates the free volume properties and the morphology to the mass transport coefficients of polymer nanocomposites. Direct, utilising the method of Positron Annihilation Life-time Spectroscopy (PALS), or indirect measurements of the free volume in the nanocomposites are discussed and the influence of spherical or anisometric nanoparticles on its properties is examined.     

A Facile Route to Reassemble Titania Nanoparticles Into Ordered Chain‐like Networks on Substrate

A facile route to reassemble titania nanoparticles within the titania‐block copolymer composite films has been developed. The titania nanoparticles templated by the amphiphilic block copolymer of poly(styrene)‐block‐poly (ethylene oxide) (PS‐b‐PEO) were frozen in the continuous PS matrix. Upon UV exposure, the PS matrix was partially degraded, allowing the titania nanoparticles to rearrange into chain‐like networks exhibiting a closer packing. The local structures of the Titania chain‐like networks were investigated by both AFM and SEM; the lateral structures and vertical structures of the films were studied by GISAXS and X‐ray reflectivity respectively. Both the image analysis and X‐ray scattering characterization prove the reassembly of the titania nanoparticles after UV exposure. The mechanism of the nanoparticle assembly is discussed.     

Effect of thermal history on the free volume properties of semi‐crystalline poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) membranes by positron annihilation lifetime spectroscopy

Free volume properties of a series of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) membranes, which were produced by various nonisothermal crystallization processes (rapid‐, step‐, and slow‐cooling processes), were investigated using positron annihilation lifetime (PAL) spectroscopy over a temperature range of 25–90 °C. From the annihilation lifetime parameters, the temperature dependence of free volume size, amount, size distribution, and fractional free volume and thermal expansion properties of free volume were discussed. A model which assumed that amorphous phase was subdivided into mobile and rigid amorphous fractions (MAF and RAF) in the semicrystalline polymer was considered to interpret the temperature dependence of those free volume properties. Morphological observation of the semicrystalline polymer by small‐angle X‐ray scattering (SAXS) indicated that the rapid‐cooled (cold‐crystallized) membranes showed a much thinner thickness of the repeating lamellar/amorphous layers and most likely higher amount of RAF, which restrained the chain motion, than the step‐ and slow‐cooled (melt‐crystallized) membranes. The difference of free volume properties among various PHBV membranes was created according to the crystalline structure of the polymer from different thermal history. The polymer crystallized with slower cooling rate induced higher crystallinity and resulted in less free volume amount and lower fractional free volume. In addition, the thermal expansion coefficients of free volume size were affected by the crystallization rate of PHBV polymer. Larger distribution of the free volume size of melt‐crystallized membranes was observed as a result of the bimodal distribution of the lamellar periodicity and less amount of RAF than that of the cold‐crystallized membranes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 855–865, 2009     

Structural characterization and high‐temperature compressive creep of PTFE‐based composites filled with inorganic nanoparticles

The PTFE‐based nanocomposites with various contents of inorganic nanoparticles (n‐AlN and n‐Si₃N₄) were prepared by cold compaction followed by free sintering. The results of scanning electron microscopy, differential scanning calorimetry, and X‐ray diffraction show that PTFE spherulite formed in the nanocomposites. When 2 wt% inorganic nanoparticles were added into the PTFE matrix, the crystallinity increased from 34.3% to 42.1% and 43.2%, respectively. Moreover, the interplanar distances for each crystal plane were enlarged and the grain sizes were smaller than that of pure PTFE. In addition, the mechanical and high‐temperature compressive creep properties were investigated. The results indicate that the introduction of inorganic nanoparticles largely increased the high‐temperature compressive creep resistance, and the maximal reduction of percentage of creep strain was up to 68%. The tensile strengths of the nanocomposites increased with increasing filler content when it was no more than 2%, and then decreased with the further increase of the filler content, whereas the elongations at break showed a reverse tendency. Copyright © 2011 John Wiley & Sons, Ltd.     

Metal Chelate Monomers Based on Nickel Maleate and Chelating N‐Heterocycles as Precursors of Core‐shell Nanomaterials with Advanced Tribological Properties

In this study, new metal chelate monomers based on nickel(II) maleate and chelating N‐heterocycles (2,2′‐bipyridine and 1,10‐phenanthroline) were synthesized and characterized. A detailed analysis of the main stages and features of the kinetics of thermal transformations of metal chelate monomers was carried out. Core‐shell nanomaterials containing nanoparticles of nickel oxide and metallic nickel in a stabilizing nitrogen‐containing polymer matrix were obtained by thermolysis of these monomers. The composition, properties and structure of the nanomaterials were studied using IR spectroscopy, thermal analysis, X‐ray diffraction, atomic force microscopy, scanning electron microscopy, high‐resolution transmission electron microscopy, and energy dispersive X‐ray spectroscopy. The tribological characteristics of NiO nanoparticles as lubricant additives were studied using a pin‐on‐disc tribometer. The coefficient of friction (COF) is the lowest at the optimum concentration of nanoparticles and increasing the concentration above the optimum level leads to an increase in COF.     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

Aggregation‐Induced Emission Gold Clustoluminogens for Enhanced Low‐Dose X‐ray‐Induced Photodynamic Therapy

The use of gold nanoparticles as radiosensitizers is an effective way to boost the killing efficacy of radiotherapy while drastically limiting the received dose and reducing the possible damage to normal tissues. Herein, we designed aggregation‐induced emission gold clustoluminogens (AIE‐Au) to achieve efficient low‐dose X‐ray‐induced photodynamic therapy (X‐PDT) with negligible side effects. The aggregates of glutathione‐protected gold clusters (GCs) assembled through a cationic polymer enhanced the X‐ray‐excited luminescence by 5.2‐fold. Under low‐dose X‐ray irradiation, AIE‐Au strongly absorbed X‐rays and efficiently generated hydroxyl radicals, which enhanced the radiotherapy effect. Additionally, X‐ray‐induced luminescence excited the conjugated photosensitizers, resulting in a PDT effect. The in vitro and in vivo experiments demonstrated that AIE‐Au effectively triggered the generation of reactive oxygen species with an order‐of‐magnitude reduction in the X‐ray dose, enabling highly effective cancer treatment.     

Isothermal crystallization kinetics of polypropylene latex–based nanocomposites with organo‐modified clay

The effect of organo‐modified clay (Cloisite 93A) on the crystal structure and isothermal crystallization behavior of isotactic polypropylene (iPP) in iPP/clay nanocomposites prepared by latex technology was investigated by wide angle X‐ray diffraction, differential scanning calorimetry and polarized optical microscopy. The X‐ray diffraction results indicated that the higher clay loading promotes the formation of the β‐phase crystallites, as evidenced by the appearance of a new peak corresponding to the (300) reflection of β‐iPP. Analysis of the isothermal crystallization showed that the PP nanocomposite (1% C93A) exhibited higher crystallization rates than the neat PP. The unfilled iPP matrix and nanocomposites clearly shows double melting behavior; the shape of the melting transition progressively changes toward single melting with increasing crystallization temperature. The fold surface free energy (σ_e) of polymer chains in the nanocomposites was lower than that in the PP latex (PPL). It should be reasonable to treat C93A as a good nucleating agent for the crystallization of PPL, which plays a determinant effect on the reduction in σ_e during the isothermal crystallization of the nanocomposites. The activation energy, ΔE_a, decreased with the incorporation of clay nanoparticles into the matrix, which in turn indicates that the nucleation process is facilitated by the presence of clay. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1927–1938, 2010     

A generalized technique for the encapsulation of nano‐sized NiO particles by styrene‐2‐hydroxyethyl methacrylate copolymer

Encapsulation of nickel oxide (NiO) particles is of great interest to the researchers as such modification produces remarkable improvement in properties and versatility in application potential. In this investigation, nanosized NiO particles were first prepared by calcination of nickel hydroxide precursor obtained using a simple liquid‐phase process. The produced NiO particles were stabilized with oleic acid and then treated with tetraethylorthosilicate to produce NiO/SiO₂ composite seed particles. Finally tri‐layered inorganic/organic composite particles were prepared by seeded copolymerization of styrene and 2‐hydroxyethyl methacrylate (HEMA) in the presence of NiO/SiO₂ composite seed particles. The produced composite particles named as NiO/SiO₂/P(S‐HEMA) were colloidally stable, and the obtained particles were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and thermogravimetric analyses. Copyright © 2015 John Wiley & Sons, Ltd.     

Local Structure of ZnO Micro Flowers and Nanoparticles Obtained by Micro‐Segmented Flow Synthesis

The micro‐segmented flow technique was applied for continuous synthesis of ZnO micro‐ and nanoparticles with short residence times of 9.4 s and 21.4 s, respectively. The obtained particles were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Small angle X‐ray scattering (SAXS) and photoluminescence spectroscopy were used to determine the size and optical properties of ZnO nanoparticles. In addition, extended X‐ray absorption fine structure (EXAFS) spectroscopy was employed to investigate local structural properties. The EXAFS measurements reveal a larger degree of structural disorder in the nanoparticles than the microparticles. These structural changes should be taken into consideration while evaluating the size‐dependent visible emission of ZnO nanoparticles.     

Sustainable Catalysis: Rational Pd Loading on MIL‐101Cr‐NH2 for More Efficient and Recyclable Suzuki–Miyaura Reactions

Palladium nanoparticles have been immobilized into an amino‐functionalized metal–organic framework (MOF), MIL‐101Cr‐NH₂, to form Pd@MIL‐101Cr‐NH₂. Four materials with different loadings of palladium have been prepared (denoted as 4‐, 8‐, 12‐, and 16 wt %Pd@MIL‐101Cr‐NH₂). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier‐transform infrared (FTIR) spectroscopy, powder X‐ray diffraction (PXRD), N₂‐sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL‐101Cr‐NH₂, electron tomography was employed to reconstruct the 3D volume of 8 wt %Pd@MIL‐101Cr‐NH₂ particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high‐energy X‐rays (60 keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki–Miyaura cross‐coupling reaction. The best catalytic performance was obtained with the MOF that contained 8 wt % palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6 nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15 mol %). The material can be recycled at least 10 times without alteration of its catalytic properties.     

Free volume and water vapor transport properties of temperature‐sensitive polyurethanes

Segmented polyurethanes (PU) with crystalline soft segments were prepared with different crystalline polyols as soft segments. Morphology and microstructure of the PUs were investigated using Differential Scanning Calorimetry (DSC), Wide‐angle X‐ray Diffraction (WAXD), and Positron Annihilation Lifetime Spectra (PALS). Water vapor transport properties of the PU membranes were measured in the temperature range of crystal melting of their soft segments. Dependence of free volume of the PUs on temperature and the relationship between the free volume and water vapor permeability of the PU membranes were investigated. The results show that the mean free volume size and fractional free volume increase more rapidly in the temperature range of crystal melting than in other temperature intervals. In the specified temperature range, water vapor permeability of the polyester based PU membranes increases significantly, caused by the steep increase in free volume, due to crystal melting of the soft segments. Water vapor permeability of the polyester based PUs exhibits approximately direct correlation with the fractional free volume within the temperature range of crystal melting. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1865–1872, 2005     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.