首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
A novel method for the measurement of chromatic dispersion of an optical fiber based on wavelength-to-time mapping using a femtosecond pulse laser (FSPL) and an optical comb filter is proposed and experimentally evaluated. In the proposed approach, the spectrum of an ultrashort optical pulse generated by an FSPL is sliced by an optical comb filter. The spectrum-sliced optical pulse is then coupled into the optical fiber under test. Thanks to the chromatic-dispersion-induced wavelength-to-time mapping in the optical fiber under test, a time-domain waveform similar to the sliced spectrum is generated at the output of the optical fiber, with different frequency components having different time delays. The time delay vs. frequency data are then recorded for the estimation of the chromatic dispersion by using least square fitting. Chromatic dispersions of two types of optical fibers with different lengths are tested. The measured dispersion values agree well with those measured by the conventional modulation phase shift (MPS) method.  相似文献   

2.
Tailored complex optical fields,may find applications in optical manipulation,imaging,microscopy,quantum information processing,and optical communications.Here,we focus on data information transfer for optical communications using complex optical fields.We review recent research progress in complex optical field modulation,multiplexing,and multicasting for data information transfer on different platforms of waveguides,free space,and fiber.Challenges and perspectives are also discussed.  相似文献   

3.
Optical multistability of a Fabry-Perot semiconductor laser is analyzed when multi-optical inputs detuned from the cavity-resonant wavelength of a semiconductor laser are injected. Many split branches are shown to be produced in the optical output versus optical input characteristics for different detuned optical inputs. It is also shown that optical outputs can be switched in any one of the optical input wavelengths by optical input pulses, based on the optical output versus input characteristics with multi-split branches.  相似文献   

4.
在有效质量近似下,利用量子力学密度矩阵理论,从理论上研究了考虑极化子效应后核壳量子点中线性、三阶非线性以及总的光吸收系数在不同条件下随入射光能量变化的关系。通过数值计算,分析了电子-LO声子和电子-IO声子相互作用对ZnS/CdSe柱型核壳结构量子点光吸收系数的影响。结果表明,极化子效应对光吸收系数有很大影响,不同声子模式对光吸收系数影响大小不同。考虑电子-LO声子后,光吸收系数被大大提高。另外,入射光强和弛豫时间对系统的吸收系数也有很大影响。  相似文献   

5.
This recent study shed demonstration on how the structural parameters changes due exposure to UV radiation and different wavelengths. So this article throws light on the changes of the optical properties and some structural properties due exposure to UV radiation and different wavelengths on irregular rayon acetate fibers. Pluta polarizing interference microscope is used to study the changes for refractive indices and birefringence with different exposure times at three different intensities on irregular rayon acetate fibers. As the principal optical parameters determined, these give an indication of the isotropic refractive index, stress optical coefficient, stress due to UV radiation, optical configuration parameter, segment anisotropy, the number of molecules per unit volume and polarizability of a monomer unit can be obtained. Also by using different wavelengths are given the spectral dispersions, Cauchy's dispersion constants, the resonant wavelength, the oscillation energy, the dispersion energy, the dielectric constant and the dielectric susceptibility for rayon acetate fibers with different wavelengths at room temperatures. Illustrations are given using graphs and microinterferograms.  相似文献   

6.
在旋光实验中 ,不同大小的气泡对实验的影响 ,详细分析了各种影响的起因。  相似文献   

7.
生物组织光学特性参数的无创检测理论与技术   总被引:8,自引:0,他引:8  
无创定量确定生物组织的光学特性在医学诊断和治疗领域中有着很重要的意义和广泛的应用前景。作为生物组织光学特性参数无创检测技术的理论基础 ,首先简要介绍了描述散射介质中光传播及分布的漫散射理论及蒙特卡罗模拟算法 ;然后分别介绍了用漫散射理论和蒙特卡罗模拟算法无创定量确定生物组织光学特性参数的具体方法 ;最后总结了到目前为止无创定量确定生物组织光学特性参数的研究成果 ,并对今后的工作作了展望  相似文献   

8.
We address the optical conductivity of undoped bilayer graphene in the presence of a finite bias voltage at finite temperature. The effects of gap parameter and stacking type on optical conductivity are discussed in the context of tight binding model Hamiltonian. Green’s function approach has been implemented to find the behavior of optical conductivity of bilayer graphene within linear response theory. We have found the frequency dependence of optical conductivity for different values of gap parameter and bias voltage. Also the dependence of optical conductivity on the temperature has been investigated in details. A peak appears in the plot of optical conductivity versus frequency for different values of temperatures and bias voltage. Furthermore we find the frequency position of broad peak in optical conductivity goes to higher values with increase of gap parameter for both bernal and simple stacked bilayer graphenes.  相似文献   

9.
非均匀光纤光栅响应特性的研究   总被引:12,自引:3,他引:9  
金晓峰  张仲先 《光学学报》1999,19(6):21-727
光纤栅在未来光纤通信与光纤传感系统中将关键性作用。本文进行了不同线型光栅迹与喃啾 等波导结构参数下的非均匀光纤光栅响应特性的数值计算,并通过对光栅响应不对称性的研究讨论,提出了光栅响应对称性的两个一般条件。  相似文献   

10.
直线阵光学综合孔径成像中的子孔径尺寸效应   总被引:9,自引:5,他引:4  
江月松 《光学学报》2005,25(8):042-1047
光学综合孔径阵列中的子孔径的位置和直径的大小对成像质量有着重要的影响。详细分析了几种不同优化排列的光学综合孔径直线阵列的无像差点扩展函数、光学传递函数和衍射成像特性.结果表明,子孔径的位置不同.光学传递函数的空间频率覆盖有很大的差异。增大子孔径的直径可以增大空间频率覆盖程度.但子孔径直径过大时义会产生空间频率冗余度和增加制造成本。直线阵光学综合孔径的衍射成像是多重像,子孔径直径的增大还可以减小重影的程度,提高成像质量。结果说明,在进行光学综合孔径阵列优化排列时必须考虑子孔径的直径大小这个重耍的因素。  相似文献   

11.
尾流光学信号的处理方法   总被引:8,自引:4,他引:4  
主要利用滤波器、离散傅里叶变换、以及统计信号处理方法等对实验室模拟的尾流信号进行分析和处理、计算.从能量的角度来看,光学信号在有无气泡幕情况下的区别是非常明显的;利用滤波器只能作为尾流光学信号的预处理,从实际应用来看,需要做进一步处理;离散傅里叶变换对不同气压下得到的处理结果存在的区别,必然也为判断不同航速、不同尾龄下的尾流提供了一种线索;以Chirp z变换的形式对尾流光学信号进行处理,使得这种分布具有相当直观的图形,结合适当的图形处理方式,将有可能确定探测尾流光学性质的特征信号.  相似文献   

12.
Angle coder of anti-counterfeiting color in optical micro-mirror arrays   总被引:1,自引:0,他引:1  
Based on the optical characteristics of optical micro-mirror and subtractive color theory, a new anti-counterfeiting model of micro-mirror pixels was established according to the analysis of the connection between the reflective brightness and structural stability. Our results demonstrate that the digital micro-mirror arrays based on the value of CMYKS subtractive color have enough reflected brightness and stability and can be used for anti-counterfeiting optical variable devices when different printing micro-mirror arrays are coded. The variety of optical effects including a security color switch on or switch off have been demonstrated by the use of different black color K or particular color S value. The display angle or orientation of the security color can be set or coded with the different S or K value.  相似文献   

13.
This paper discusses optical coupling for n-GaAs/AlGaAs multiple quantum well infrared photodetectors (MQWIPs). The optical responsivity has been compared with different grating structures fabricated by reactive ion etching (RIE), device form, and incidence mode. The optical coupling efficiencies are further analyzed by the modal expansion model (MEM), including optical field distributions in different size photosensitive element and interrelated influences with scattering matrix method based on plane-wave expansion (PWE). Some extra coupling parameters have been obtained in designing and optimizing QWIPs FPA.  相似文献   

14.
吴洋  陈奇  徐睿莹  葛睿  张彪  陶旭  涂学凑  贾小氢  张蜡宝  康琳  吴培亨 《物理学报》2018,67(24):248501-248501
氮化铌(NbN)纳米线是超导纳米线单光子探测器(SNSPD)常用的光敏材料,其光学性质是影响SNSPD性能的关键因素.本文结合实验数据和仿真结果,系统研究了多种NbN超导纳米线探测器器件结构的光学特性,表征了以下四种器件结构下的反射光谱以及透射光谱:1)双面热氧化硅衬底背面对光结构;2)双面SiN硅衬底背面对光结构;3)硅衬底上以金层+SiN缓冲层为反射镜的正面对光结构;4)以分布式布拉格反射镜(DBR)为衬底的正面对光结构.并在上述四种器件结构基础上,生长了不同厚度的NbN薄膜,观察不同厚度NbN薄膜的吸收效率.经分析,发现在不同器件结构下的最佳NbN厚度与光吸收率的关系如下:双面热氧化硅衬底上的NbN层在1606 nm处最大吸收率为91.7%,其余结构在最佳NbN厚度条件下吸收率都能达到99%以上.其中双面SiN的硅衬底结构中最大吸收率为99.3%, Au+SiN为99.8%, DBR为99.9%.最后,将DBR器件实测结果与仿真结果进行了差异性分析.这些结果对高效率SNSPD设计与研制具有指导意义.  相似文献   

15.
光纤延迟线型全光缓存器的研究   总被引:2,自引:0,他引:2  
吴重庆 《光学学报》2011,(9):134-146
概括了本课题组在近十年中进行的光纤延迟线型全光缓存器的研究工作,介绍了基本的基于3×3平行排列耦合器的基本缓存单元——双环耦合全光缓存器(DLOB),并以此为基础,构建出缓存时间为1~9999 T(时间单位)的大动态范围、多波长等全光缓存器,速率都在2.5 Gb/s以上,并研制出基于偏振的全光缓存器.对这些缓存器的原理...  相似文献   

16.
Multiple-beam Fizeau fringes technique with an opto-thermal device is used to study the effect of temperature on the optical properties of Philips graded-index optical fibres. The refractive index profile of the optical fibre is measured at different temperatures. From these profiles the opto-thermal coefficient, the profile shape parameter α, the cladding/core maximum refractive index difference Δn and some guidance parameters of the optical fibre that play an important role in communication are determined. The variation of oscillation and dispersion energies along the diameter of the optical fibre (energy profile) are calculated at different temperatures. An empirical formula of the energy profile is obtained. Microinterferograms are given for illustrations.  相似文献   

17.
徐升华  李银妹  楼立人 《中国物理》2006,15(6):1391-1397
The technique of optical tweezers has been improved a lot since its invention, which extends the application fields of optical tweezers. Besides the conventionally used Gaussian beams, different types of ring beams have also been used to form optical tweezers for different purposes. The two typical kinds of ring beams used in optical tweezers are the hollow Gaussian beam and Laguerre--Gaussian (LG) beam. Both theoretical computation and experiments have shown that the axial trapping force is improved for the ring beams compared with the Gaussian beam, and hence the trapping stability is improved, although the transverse trapping forces of ring beams are smaller than that of Gaussian beam. However, no systematic study on the trapping forces of ring beam has ever been discussed. In this article, we will investigate the axial and transverse trapping forces of different types of ring beams with different parameters systematically, by numerical computation in which the ray optics model is adopted. The spherical aberration caused by the refractive index mismatch between oil and water is also considered in the article. The trapping forces for different objectives that obey the sine condition and tangent condition are also compared with each other. The result of systematical calculation will be useful for the applications of optical tweezers formed by different types of ring beams.  相似文献   

18.
This paper demonstrates the intensity modulation characters of orthogonally polarized HeNe lasers with different optical feedback level generated by the variable reflectivity of external reflector. The modulation depths of the orthogonally polarized frequencies are increased when the optical feedback level becomes strong. It also observes that the modulation amplitudes are different for different external cavity length. Based on the vectorial extension of Lamb's semi-classical theory, it finds that the calculations are consistent with the experimental results.  相似文献   

19.
红外光学系统决定着红外系统的工作模式与工作精度,影响系统的作用距离,是红外系统的重要组成部分。多视场光学系统可以用不同的视场对同一目标进行搜索、识别、跟踪与瞄准,在军事应用领域获得了广泛的应用。光学系统的结构形式影响红外系统的成像质量、性能指标、外形尺寸、价格成本、机电复杂程度等,因此研究和选取合适的多视场光学系统结构形式显得非常重要。对目前国内外应用于凝视焦平面探测器的多视场红外光学系统结构形式,如切换变焦、光学补偿变焦、机械补偿变焦、混合变焦、双光路变焦等进行了特点分析,比较了其优点与局限性,对光学设计人员合理选用多视场光学系统结构形式具有一定的理论指导作用和意义。  相似文献   

20.
Summary The elemental composition and the optical properties of hydrogenated amorphous GaAs prepared by r.f. reactive sputtering at different hydrogen and argon pressure and substrate temperature have been determined. From the dependence of the absorption coefficient on photon energy the optical gap has been deduced according to the Tauc law. The data obtained for stoichiometric samples are compared with similar data obtained by different authors. The influence of various deposition parameters on stoichiometry and on the optical properties is briefly discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号